Can not install Microsoft SQL Server 2012 Express on Win7, 64 bit

Hi,
I had a Win7 Ultimate 64bit, Intel(R) Core(TM) 2 Duo 2.8Ghz, 4GB SDRAM, 500GB HDD. I have been used Visual
studio 2010, SQL Server 2008 R2 (SQL Management Studio), SQL Server Express2005, SQL Server Express2008, Microsoft Office 2010. I downloaded setup from microsoft.com/en-us/download/details.aspx?id=29062,
after extract files and run setup which it's giving me an error message.
"The operation system on this computer or its service pack level does not meet the minimum requirements for SQL server 2012. To determine the minimum required operating system supported for this SQL server release, see Hardward and software
Requirement for installing SQL server 2012 at: http://go.microsoft.com/fwlink/?LinkID=195092"
Anyone help me this issue

it requires a minimum of Windows 7 SP 1 before installing SQL server 2008.
It can be downloaded from below:
http://support.microsoft.com/kb/976932/en-us
For more details check below:
http://msdn.microsoft.com/en-us/library/ms143506.aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Similar Messages

Can not install Microsoft SQL Server 2012 Express on Win7, 64 bit, used on VS Studio 2010

I had a Win7 Ultimate 64bit, Intel(R) Core(TM) 2 Duo, 4GB SDRAM, 500GB HDD. I have been used Visual
studio 2010, SQL Server 2008 R2 (SQL Management Studio), SQL Server Express2005, SQL Server Express2008, Microsoft Office 2010. I downloaded setup from microsoft.com/en-us/download/details.aspx?id=29062,
after extract files which it's giving me an error message.
Anyone help me this issue.
Other questions is What if I want to use SQL management Studio 2008 R2 and connect SQL Server 2012 on Windows 7

I downloaded setup from microsoft.com/en-us/download/details.aspx?id=29062,
after extract files which it's giving me an error message.
Anyone help me this issue.
I'd ask them over here.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlexpress
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

SqlLocalDB.exe not Installed when sql Server 2012 Express (LocalDb Edition) is installed

I have been having a very frustrating time trying to connect to a localDB instance of SQL Server 2012. So I started again from scratch on another computer (Windows 7). I first installed sql server 2012 Express with tools (via ENU\x64\SQLEXPRWT_x64_ENU.exe)
and then installed the LocalDB Edition via sqlLocalDB.msi. The first installation seems to have gone OK. The second installation proceeded normally and finally advised that "Setup has installed SQL Server 2012 Express LocalDB successfully."
A whole lot of files were installed in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, including sqlservr.exe. But the SqlLocalDB.exe utility was
not amongst them.
Does anyone have any idea what is happening here? From where can I download a copy of sqlLocalDB.exe

A whole lot of files were installed in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, including sqlservr.exe. But the SqlLocalDB.exe utility was
not amongst them.
The tool is located in
C:\Program Files\Microsoft SQL Server\110\Tools\Binn
Olaf Helper
[ Blog] [ Xing] [ MVP]

Reports & Microsoft SQL Server 2012 Express LocalDB support policy

Hello,
Willing to move some databases into Microsoft SQL Server 2012 (2014) Express LocalDB, I have tryed to map some reports on that database.
Using OLE DB SQL Native Client (v11) and SAP CR RunTime SP10 (>SP9), I still have trouble when using this data source:
After drawing some simple reports (standard ones with 2-3 fields from the database):
- VS designer:
+ when "checking database" or "getting a preview" of the report, it always complains about missing tables.
+ when trying to "re-map" tables from one SQL Server 2012 Express LocalDB to another one it fails, complaining about not findind resources.
- Running application (.NET 4.0, 32 or 64-bits):
+ without any change to the report configuration: CR Viewer complains with multiple error codes (17, ...) that it cannot find the tables
+ trying to change the configured database from the report: CR VIewer complains with some more error codes
=> Is Microsoft SQL Server 2012 Express LocalDB now officially supported by CR ?
=> Is changing datasource/database configuraton during execution now officially supported by CR ?
Feel free to provide an any links / howto's / white paper about how managing Microsoft SQL Server 2012 Express LocalDB with SAP CR !
Many thanks in advance.
Regards.

Don,
I did not want you to think that I am not willing to change anything...
The issue is that LocalDB specs (http://msdn.microsoft.com/en-us/library/ms130822(v=sql.110).aspx) are not (seems not) fulfiled by what SAP APIs provide.
Following specs, I need to provide ADO DB/SQL Native Client v11 an "AttachDBFileName" property which, for LocalDB instance, is equal to the DatabaseName property (check below screenshot from MS Mgmt Studio connected to a SQL Server 2012 LocalDB instance).
Moreover, OLEDB discovery provide in CR 2013 UI this same list of "DatabaseName":
When connected, this same CR 2013 UI got the right "view" of connected "MDF-labelled" names:
Moreover, CR connected datasource properties also provide an "initial catalog" (databasename) value with that "MDF-labelled" name:
That is what I saw previously in API dumped objects and what I tryed to reproduce in my code:
As previously explained, after adding tables, I am also beeing able to add fields from those tables in my fresh-new report document:
It fikrst shows results in preview but as soon as I try to refresh / add some more fields / ask CR to "check database" / "change database source", the interface always complain about having "lost" objects:
Site note for Ludek Uher: CR 2013 StandaAlone fresh-new builded reports are not working neither using CR runtime SP10 when opening/updating that report..
So YES, I am OK to change whatever is required but please explain me what to use/put into the "crConnectioninfo.DatabaseName" property for a SQL Express 2012 LocalDB case.
Or leave it as is, LocalDB not being supported by CR ...
(all my reports & c# code are working well while using SQL Express 2012 "classic" (not localdb)).
Thanks again for your time.
Regards.

Is it possible to install Microsoft SQL Server 2008 Express on windows server 2012 (not R2) ?

I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?

I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Microsoft SQL server 2012 express

i recently downloaded ENU\x86\SQLEXPR_x86_ENU.exe and ENU\x86\SQLManagementStudio_x86_ENU.exe from microsoft SQL server 2012 from official download centre page. First i installed SQLEXPR_x86 (database engine) with mixed mode authentication, then i installed
management studio with new installation option rather than selecting add new features.after both the successfull installation i learnt that in the object explorer, expanding database+system database+master i dont have a table option to create
new tables as earlier found in sql 2005 and 2008 versions. in simple words i dont have a table designer to create table, i have to type the statments using query editor to create and do manipulations in the table. for your further help i want to
tell you some related information:
1.i tried to get the table option with ENU\x86\SQLEXPRADV_x86_ENU.exe and ENU\x86\SQLEXPRWT_x86_ENU.exe without installing management studio as studio is already present in these packages. but still the problem persist.
2.i have windows 7 home basic installed on PC and windows 7 home premium on laptop both with service pack 1 with all the new updates.
3.after installation of sql server 2012 service pack, i thought problem might get solved but no.
i really need table designer feature.

Hello,
It is simple : in SSMS , after having connected to your SQL Server instance, you should see in the left panel a TreeView with the name of your instance. Right-click on the name of your instance .I n the context menu , click on Facets ( 12th item just above
Start PowerShell ).You will open a new form labeled "View Facets" followed by the "full" name of your SQL Server. In the bottom left part , you should see view the connection string .Click on it.
If the name of your database is master , it means that you are connected to the master database . The master database is a system database in which you are not allowed to create a new table ( it is an essential database containing information essential to
the survival of your SQL Server ).See this link ( even if it was for SQL Server 2012, it is always valuable )
http://www.mssqltips.com/sqlservertip/1420/sql-server-system-databases/
I would suggest to have a look at this link :
http://msdn.microsoft.com/en-us/library/ms187837.aspx ( special 2012 ) and especially the part recommendations.
As you have not yet created an user database , you connect automatically to the master database which is at least dangerous when you want to create a new table.
You have before to create a new database in which you will create your new table. It is what I have explained in my former post.
If you don't know how to create a new database, you have not posted in the good forum ( a curious habit from the original posters , maybe because they don't understand how to find the "good" forum but I recognize that I am often hesitating before finding
the most appropriate forum even if I am moderator since 6 years ). It is possible that I have not been clear enough but English is not my mother tongue ).
So don't hesitate to post again to obtain more help and explanations : this forum is full of highly-qualified persons always ready to help persons lost in SQL Server.
For me , you have 2 important steps :
- create a new database
http://msdn.microsoft.com/en-us/library/ms176061(v=sql.120).aspx
http://msdn.microsoft.com/en-us/library/ms186312(v=sql.120).aspx
- create a new table
http://msdn.microsoft.com/en-us/library/ms174979.aspx
According to me , it is simpler to create a new database or/and table without using TRANSACT-SQL through the visual interface of SSMS
for a database : right-click on the Databases node of your SQL Server instance and click on Create Database
for a table : as soon as you have created your database , its name should appear in the list under the Databases node.
Click on the little + on the left of this name to expand the node related to this new database.
Right-click on the Tables node and choose New Table. You should arrive to a new form making relatively easy the creation of the table , more exactly , the structure of the table with its columns ( names and data types ).
Don't hesitate to post again if you need more help( it is what I am doing when I am lost ) : you will find always someone available to help you at any time as moderators/answerers are nearly from every continent at any hour of the day ( when USA is sleeping
, Europe and Asia are awake ... )
Have a nice day
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

Setup closed with exit code: 0x84C40013 - Silent Install error - SQL Server 2012 express management studio SP1

I am trying to create a silent installation package for SQL Server 2012 Express Management Studio SP1. (both x86 & x64)
Prior to installation I have performed the following :
1. Turned ON the Windows feature 'Microsoft .NET Framework 3.5.1' (I had read somewhere on the internet that this is required prior to installation)
2. Installed Microsoft .NET Framework 4.0
I am using the following command line to perform an unattended install :
<EXENAME> /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
However, the installation fails abruptly.
The application installs successfully with the following command line :
<EXENAME> /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
The error occurs only while attempting to install the application with the /Q switch appended.
Please help.

Hello Fanny,
Thanks for providing the link to the SQL Server 2012 unattended install guide.
However, I must highlight that I was running the setup.exe with "Run As a Administrator" option and still facing the issue.
Anyways, I found out the root cause and I must say that it was a rather silly one.
As I had stated previously, the following command line was causing the issue :
<EXENAME>
/Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
I simply changed it to the following and it worked....
<EXENAME>
/QUIET /IACCEPTSQLSERVERLICENSETERMS /ACTION=INSTALL /FEATURES=TOOLS
It so seems that everything must be in CAPITALS for this to work.
Regards,
Soumen

How many users can login to Microsoft SQL Server 2012 standard?

I searched around the forum but didn't find anything specific.
I downloaded Microsoft SQL Server Standard 2012. How many users can login into it?

Hi Texastig,
Welcome to forum. I guess Sean/Vaibhav aptly answered your question can you please mark there reply as answer. An OP does not marks his own comment as answer which actually is thank you comment or unless he himself found an answer
Thanks for understanding
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Microsoft SQL Server 2012 Management Studio Express

Hello,
I have a question, Can I use Microsoft SQL Server 2012 Management Studio Express tool to administrate my SQL Server 2008 Enterprise database without a restriction or limitations?.
Basically, I have a SQL server 2008 R2 database as production enviroment(Enterprise version) and I would like to know if I can use Microsoft SQL server 2012 Management Studio Express tool to manage my database without limitations.
Thanks

SSMS2012 is backwards compatible so you can use ..
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/0151c2e8-2281-4a78-86b0-20cc1bfd57ac
Raju Rasagounder MSSQL DBA

Microsoft SQL Server 2008 Express for SAP BusinessObjects Enterprise 4.0

Hi Expert,
I'm going to install SAP BusinessObjects Enterprise 4.0 on my virtualized system (vmware) composed as: windows server 2008 Enterprise Edition R2 + Tomcat. I have some doubts related to the DB version to choose.
Due to the fact that Microsoft SQL Server 2008 Express is bundled with SAP BOE 4.0 I want to use this DB.
However, I saw in the Microsoft Portal that Microsoft SQL Server 2008 Express (http://www.microsoft.com/sqlserver/en/us/product-info/compare.aspx) that:
Number of CPUs     1
Maximum memory utilized     1 GB
Maximum database size     10 GB
These my doubts:
1) Could these characteristics generate performance issues for a production environment?
2) Which is a typical DB size for a production enviroment? could be greater then 10 GB?
3) Can I use Microsoft SQL Server 2008 Express in a virtualized system (vmware)?
Thanks in advance for collabortion
regards
gio'

Hi Gio
Remember that the BOE system database (or repository) only has a few tables in it, with really one main table that stores a reference to each folder, report, user, group, server, etc. on the system. So the table and the database itself do not grow very large. In the past year, we have done over 70 SAP BusinessObjects projects and I can't recall one where the database size would even approach 5GB in total, let alone 10GB.
The reason for this is that the database only stores a reference to the physical objects and content within BOE-- the actual reports, universes, etc. are stored on the file system within the Input and Output file repository folders.
And the memory constraints are not really an issue either with BOE-- the database itself does not come under much strain during the day-to-day operation of the server. If you believe that the memory may be an issue, you can always start with SQL Server 2008 Express and then using the new tools in the 4.0 CMC to monitor the memory usage on the server. If you need to, you can move the system database to another SQL Server edition, or alternately move the database to another one of the supported platforms, including Oracle, DB2, etc.
Hope this helps!
regards
David

I can't install Microsoft SQL

Hi,
I can't install Microsoft SQL server 2008 or 2008R2
Could you please help me?
Thank you.

Hi,
I can't install Microsoft SQL server 2008 or 2008R2
Could you please help me?
Thank you.
Adding to what others have said please post summary.txt file which would be located at
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
Please take help of
this link if you still find it difficult to locate log files
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

SQL Server 2012 Express - Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop

Windows 7 Home Premium, SP1
64-bit
I just installed SQL Server 2012 express - Express with Advanced Services (contains the database engine, Express Tools, Reporting Services, and Full Text Search),
file name - SQLEXPRADV_x64_ENU.
Opening SQL Server Management Studio causes the error -
"Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop,
Version=7.1.40304.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The
system cannot find the file specified."
Do I need to install another file? Did I download the wrong version?
Any suggestions? Thanks for any help.

Hello,
The issue may occure when the installation of your SQL Server is not a complete or a successful one. Did you try to repair or reinstall the SQL Server Express? You can also try to install
Service Pack 1 for SQL Server 2012
to check if the issue presists.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

SQL Server 2012 Express Install on Windows 7 SP1 Embedded not using virtual account?

Hi there,
I did a default installation of SQL Server 2012 Express on Windows 7 embedded Standard SP1.
When I look at the SQLSERVER service credential it is configured to run under "NETWORK SERVICE" instead of the virtual account "NT SERVICE\MSSQL$SQLEXPRESS".
This is different from SQL 2012 Express installation on a non-embedded Windows 7.
Why is this difference?
Secondly, because of this, I am unable to take a backup of databases to any folder other than the default SQL folder.

Hi Chandrasekaran,
As Local Service account, the Network Service account and high privileged Local System account could be used by many services.
It becomes harder to track which service is actually accessing resources and performing actions, because all the services are using the one Network Service account or other account.
In Windows7 and Windows Server 2008R2, it introduces a new type of account called a virtual account, which emulates creating many unique instances of the Network Service account, so each service runs with its own instance of the Network Service account.
For example, when you install SQL 2012 on Windows Server 2008 R2 or Windows 7 and later you’ll see the services run with virtual service accounts named like:
in the format NT SERVICE\<SERVICENAME>.
According to your description, when the SQLSERVER service was run under “NETWORK SERVICE”, you only back up database to the default SQL folder. It may be caused by the NETWORK SERVICE account has limited local privileges, just accesses network
resource with the computer credential. I recommend you change the account to Local System account, by default, which has full permissions on your computer.
For more information about SQL Server service account and virtual account, you can review the following articles.
http://www.travisgan.com/2013/06/sql-server-service-account-and-per.html
http://www.sqlservercentral.com/blogs/sqldbauk/2014/01/13/sql-server-2012-and-virtual-service-accounts/
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Errro while installing sql server 2012 express edition on Windows 8 -64 version

Hi,
Im trying to install sql server 2012 express edition on windows 8 machine(64 bit),however im getting same error every time.
The following error has occurred:
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337
i've googled and checked all prerequisite which is already installed.so not finding the reason behind this error.
it would be great if any one can help on resolving this error.
Thanks in advance
Regards
Ritesh

Hi ,
Thanks for help. here is the log summary text
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2068051679
Start time:                    2014-02-05 12:30:44
End time:                      2014-02-05 12:36:21
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  IDEA-PC
Machine processor count:       4
OS version:                    Future Windows Version
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2008 R2   MSSQLSERVER          MSSQL10_50.MSSQLSERVER         Database Engine Services
1033                 Developer Edition    10.50.1600.1    No
SQL Server 2008 R2   MSSQLSERVER          MSSQL10_50.MSSQLSERVER         SQL Server Replication
1033                 Developer Edition    10.50.1600.1    No
SQL Server 2008 R2   MSSQLSERVER          MSSQL10_50.MSSQLSERVER         Full-Text and Semantic Extractions for Search 1033
Developer Edition    10.50.1600.1    No
SQL Server 2008 R2
Management Tools - Basic                 1033                 Developer Edition
10.50.1600.1    No
SQL Server 2008 R2
Management Tools - Complete              1033                 Developer Edition    10.50.1600.1
No
SQL Server 2008 R2
Client Tools Connectivity                1033                 Developer Edition    10.50.1600.1
No
SQL Server 2008 R2
Client Tools Backwards Compatibility     1033                 Developer Edition    10.50.1600.1    No
SQL Server 2008 R2
Client Tools SDK                         1033
Developer Edition    10.50.1600.1    No
SQL Server 2008 R2
Integration Services                     1033                 Developer Edition
10.50.1600.1    No
Package properties:
Description:                   Microsoft SQL Server 2012 Service Pack 1
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         c:\b33170cf028067db5b8335d2\x64\setup\
Installation edition:          Express
Product Update Status:
None discovered.
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLFASHION
INSTANCENAME:                  SQLFASHION
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          AllFeatures_WithDefaults
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  SQL
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  Latin1_General_CI_AI
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLFASHION
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           idea-pc\lenovo
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                SQL Server Common Files
Component error code:          2337
Component log file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description:             The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                SQL Server Common Files
Component error code:          2337
Component log file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description:             The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature:                       SQL Client Connectivity
Status:                        Passed
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\SystemConfigurationCheck_Report.htm

I need help installing SQL Server 2012 Express

I am very much an amateur. I got a new machine. The old one had Server 2008 R2 but the recommendation was that I need to move to 2012 Express.
When I moved to the new machine, the mover (LapLink) screwed up the version of 2008 R2. IOW, I now have to go forward and install 2012..
I downloaded all the 64 bit files (5 of them). When I start SQLEXPR_x64_ENU.exe, the process starts and then I'm given the choice of a new install or upgrade. I chose the new install. The process started and I got the following message ...
"Failed to retrieve data for this request.."
There are no hints anyplace as to what this means.
When I click "OK", a new status window pops up and proclaims that something is wrong. Then all activity stops.
I don't know what to do. I can't use either version and I really can't tell you much more to help me.
Eric Johnson

I'm not certain how to send the log material so I'll just cut 'n paste the file named "Summary_Eric-PC_20140921_134001_GlobalRules" If this isn't the right way, please forgive me and suggest what is right. Anyway, here goes ...
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2146233088
Exit facility code:            19
Exit error code:               5376
Exit message:                  Failed to retrieve data for this request.
Start time:                    2014-09-21 13:40:09
End time:                      2014-09-21 13:40:29
Requested action:              RunRules
Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x48BB60BC%400xBB814387&EvtType=0x48BB60BC%400xBB814387
Machine Properties:
Machine name:                  ERIC-PC
Machine processor count:       8
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         c:\851594228c4871a4e88415938631\x64\setup\
Installation edition:          Express
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           true
FEATURES:
HELP:                          false
INDICATEPROGRESS:              false
INSTANCENAME:                  <empty>
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
RULES:                         GlobalRules
UIMODE:                        AutoAdvance
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140921_134001\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    Message:
        Failed to retrieve data for this request.
    Data:
      HelpLink.ProdName = Microsoft SQL Server
      HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
      HelpLink.LinkId = 20476
      HelpLink.EvtType = 0x48BB60BC@0xBB814387
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
        at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
    Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
        Message:
                Attempted to perform an unauthorized operation.
        HResult : 0x84bb0001
                FacilityCode : 1211 (4bb)
                ErrorCode : 1 (0001)
        Data:
          WatsonData = HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
        Stack:
                at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
                at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapObject(String machineName, RegistryView registryView, String instanceId, String instanceName, String
instanceType, String instanceSuffix, UpgradedInstanceStateEnum instanceState)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollectionInHive(String machineName, RegistryView regView, List`1 subKeys)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollection()
                at Microsoft.SqlServer.Discovery.Instance.GetData(EnumResult erParent)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        Inner exception type: System.UnauthorizedAccessException
            Message:
                        Attempted to perform an unauthorized operation.
            Stack:
                        at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)

Can not install Microsoft SQL Server 2012 Express on Win7, 64 bit

Similar Messages

Maybe you are looking for