Can only telnet from other switches to a SG300 switch. Also can't access web interface.

Question

For whatever reason I can telnet from another switch to the SG300 switch but not directly to the switch. I also can't access the web interface or ping the switch. Any help would be appreciated. Here is the running config
config-file-header
WasteWaterSG30010MPP
v1.3.5.58 / R750_NIK_1_35_647_358
CLI v1.0
set system mode switch
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end xxxxxxxxxxxxxxxxxxxxxxxx
vlan database
default-vlan vlan 2
exit
vlan database
vlan 2,75,200,999
exit
voice vlan id 200
voice vlan oui-table add  ________
voice vlan oui-table add _phone_____________
voice vlan oui-table add ___________________
voice vlan oui-table add ______________
voice vlan oui-table add
voice vlan oui-table add ___________
voice vlan oui-table add ___
voice vlan oui-table add ______________
hostname WasteWaterSG30010MPP
line console
exec-timeout 0
exit
line telnet
password 382fda4a4a26e6637edac0eb8b8ba4581087d32d encrypted
exit
line console
password 382fda4a4a26e6637edac0eb8b8ba4581087d32d encrypted
exit
enable password level 15 encrypted 382fda4a4a26e6637edac0eb8b8ba4581087d32d
username admin password encrypted 382fda4a4a26e6637edac0eb8b8ba4581087d32d privi
lege 15
snmp-server location XXXXXXXX
snmp-server community String1 ro view Default
sntp server 172.16.2.1
ip telnet server
interface vlan 2
 ip address 172.16.2.23 255.255.255.0
 no ip address dhcp
interface gigabitethernet1
 storm-control broadcast enable
 storm-control broadcast level 10
 storm-control include-multicast
 port security max 10
 port security mode max-addresses
 port security discard trap 60
 spanning-tree portfast
 switchport mode access
 switchport access vlan 999
 macro description ip_phone_desktop
 !next command is internal.
 macro auto smartport dynamic_type unknown
interface gigabitethernet2
 spanning-tree portfast
 switchport mode access
 switchport access vlan 999
interface gigabitethernet3
 spanning-tree portfast
 switchport mode access
 switchport access vlan 999
interface gigabitethernet4
 storm-control broadcast enable
 storm-control broadcast level 10
 storm-control include-multicast
 port security max 10
 port security mode max-addresses
 port security discard trap 60
 spanning-tree portfast
 switchport mode access
 switchport access vlan 999
 macro description ip_phone_desktop
 !next command is internal.
 macro auto smartport dynamic_type unknown
interface gigabitethernet5
 spanning-tree portfast
 switchport mode access
 switchport access vlan 999
interface gigabitethernet6
 spanning-tree portfast
 switchport mode access
interface gigabitethernet7
 spanning-tree portfast
 switchport mode access
 switchport access vlan 999
interface gigabitethernet8
 spanning-tree portfast
 switchport mode access
 switchport access vlan 999
interface gigabitethernet9
 spanning-tree link-type point-to-point
 switchport trunk allowed vlan add 75,200,999
 switchport trunk native vlan 2
 macro description switch
 !next command is internal.
 macro auto smartport dynamic_type switch
interface gigabitethernet10
 spanning-tree link-type point-to-point
 switchport trunk allowed vlan add 75,200,999
 switchport trunk native vlan 2
 macro description switch
 !next command is internal.
 macro auto smartport dynamic_type switch
exit

Answer 1

A member of which VLAN ID is that device from which you trying to reach that switch?
Is that device directly connected to switch WasteWaterSG30010MPP? If yes, to which port?
If you are connecting from different VLAN than VLAN2, are you using routing between VLANs? Where is that routing device connected to?
> I also have another switch that connects to the network through this switch and am able to telnet to it.
that second switch member of same VLAN 2? Or management is part of different VLAN?
..too few information to be able to give you final answer.