Can PAP2 recover from firmware download disruption

If the PAP2's download of its firmware or config file are disrupted, does it recover gracefully and try again or will it be corrupted?
Thanks

If you have the audiobook in iTunes on your computer, then you can just sync it back to your iPhone. If, however, this is an audiobook purchased from the iTunes Store and it's not in iTunes or a backup, then it's probably gone. Audiobooks are one of the few items for which redownloading is not available. If you indeed have no backup copy anywhere, then you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store and request a redownload. They may well refuse. though.
Regards.

Similar Messages

  • After delete plugin, all bookmarks dispeared. I am able to use hard drive recover , found firefox.bak. Can I recover from there?

    After delete plugin, all bookmarks dispeared. I am able to use hard drive recover , found firefox.bak folder. Can I recover from there?

    Thanks.
    Just to get the terminology right, neither Spybot Search & Destroy nor Avast Browser Cleanup are supposed to clean viruses. This is what anti-virus software is for.
    Avast Browser Cleanup is a tool that serves to delete unwanted toolbars and plug-ins. None of these are viruses.
    I haven't heard about Avast Browser Cleanup before, and it's certainly not something I'd have used. In any case, it's not supposed to kill your profile.
    ''I have recovered a folder called Mozilla Firefox.bak and some other stuffs''
    So what's in that recovered folder? If it contains the automatically created backups of your bookmarks, you can recover your bookmarks from that.
    https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them

  • Can i recover a deleted download from my iPhone?

    can I recover a deleted audiobook from my iphone via itunes?

    If you have the audiobook in iTunes on your computer, then you can just sync it back to your iPhone. If, however, this is an audiobook purchased from the iTunes Store and it's not in iTunes or a backup, then it's probably gone. Audiobooks are one of the few items for which redownloading is not available. If you indeed have no backup copy anywhere, then you can go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store and request a redownload. They may well refuse. though.
    Regards.

  • Can't recover from sleep sometimes: "Oh no! Something has gone wrong!"

    I'm running gdm + gnome-shell (force fallback mode) on a Thinkpad W520 with intel integrated graphics only (via bios setting, so no optimus). Once a week or so, my Laptop fails to go to sleep properly and to recover from it.
    It basically works like this, normally when I close the lid, the sleep LED blinks a couple of times, and then stays on (and you can hear the fan turn off). When sending the laptop to sleep fails, the led blinks indefinitely (like, all night, if you let it), the fan keeps running as well.
    Once you open the lid again, you are greeted with the message "ACPI: Unable to dock!" on a black screen. This happens when successfully recovering from sleep mode as well, though.
    Shortly afterwards, instead of seeing a password prompt, you see this:
    http://wocares.com/host/images/516726_sleeperr1.jpg
    I tried to search the problem but couldn't find anything that was quite like my problem. I did however find someone saying the ~/.xsession-errors file could contain clues. So here is that:
    /etc/gdm/Xsession: Beginning session setup...
    localuser:esl being added to access control list
    /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
    GPG_AGENT_INFO=/home/esl/.cache/keyring-JAbzae/gpg:0:1
    (gnome-panel:1563): Gtk-CRITICAL **: gtk_accelerator_parse_with_keycode: assertion `accelerator != NULL' failed
    ** (gnome-panel:1563): WARNING **: Unable to parse mouse modifier '(null)'
    Failed to play sound: File or data not found
    Initializing tracker-store...
    Tracker-Message: Setting up monitor for changes to config file:'/home/esl/.config/tracker/tracker-store.cfg'
    ** (nm-applet:1585): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
    ** Message: applet now removed from the notification area
    ** (nm-applet:1585): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
    ** (nm-applet:1585): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
    ** (process:1578): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
    ** Message: Starting applet secret agent because GNOME Shell disappeared
    ** (nm-applet:1585): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
    ** (process:1578): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
    ** (process:1578): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
    Tracker-Message: Setting up monitor for changes to config file:'/home/esl/.config/tracker/tracker-store.cfg'
    ** Message: applet now embedded in the notification area
    (gnome-settings-daemon:1515): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -8 and height 27
    (nm-applet:1585): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 27
    ** Message: applet now removed from the notification area
    Starting log:
    File:'/home/esl/.local/share/tracker/tracker-store.log'
    (notification-daemon:1608): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 27
    Any help or pointers in the right direction would be appreciated.

    I'm having the same problem as you on a T420 (without optimus), see here: https://bbs.archlinux.org/viewtopic.php?pid=1131177

  • .rmt file missing from firmware download

    The readme file included with the firmware download zip file states to look for a .rmt file. There are only .txt files and a .bin file in the zip file. Are the instruction wrong/obsolete or should there be a .rmt file in the .zip file or is the .bin file the real firmware update file?

    actually, only the .bin is what you need... even if you have the .zip file, you will need to unzip it and get the .bin (binary file) you will need for firmware upgrade... the text file only gives you information...
    "a helping hand in a community makes the world a universe"

  • How can I Recover From Damaged Drive?

    Hi,
    I've had an internal HD corrupt in my new Mac Pro, and I'm wondering what I can do to recover the data.  I've looked at this several posts including this one listing 3 data recovery software apps:
    https://discussions.apple.com/message/15249262#15249262
    I also considered using Ubuntu Remix as described here, but it's looking like the dd tool exists in OSX as a command from terminal?  That led me to this article, describing how to use the dd tool.  So IS this something that's just included in OSX?  Also, I'm not really clear on what to enter for the Unix drive path.  The drive shows up in Disk Utility as a 4.14TB drive (even though it's only 2TB), but is not mounted, and so I don't know what the drive path would be. . . would it still be /volumes/Archive?  Or would it be the name I see in Disk Utility? 
    I've already tried Disk Warrior (booting to the CD even though the drive in question is not my OSX drive), and it said the drive couldn't be rebuilt.  When I startup the computer, it gives me a message saying the drive couldn't be initialized, and the option to initialize, eject, or (I think) ignore. 
    Does anyone have any thoughts on the best methods from what I've listed here?  I can supply more information if needed.  Just tell me what to look for.
    Thanks,
    Lawrence

    Lawrence,
    The same has happened to my gf's iMac. She has 27" iMac mid 2011 and today the drive went down. Instead of 1TB HD with two partitions Disk Utility lists it as "4.14 GB ST_M13FQBL Media" with no partitions. On top of that there is a strange noise generated - I believe this is fan related.
    It took me a while to workout what the heck was going on with it as Apple Hardware Testing (AHT) does not list any problems. Initially I thought that MBR was wiped due to Windows 7 service pack installation, but when run Disk Utility I realized that there is something wrong with HD.
    Apple started replacement program for faulty Seagate HDs for iMac sold between late 2009 and mid 2011. Unfortuantely her iMac is not eligible, but luckilly it is still on warranty. More details about the recall can be found here http://www.apple.com/uk/support/imac-harddrive/
    I have read a bit about the issue and I found this link was very usefull:
    When a drive powers up, its MCU (microcontroller) puts it through a self test during which it confirms the integrity of the SDRAM and serial flash memory, among other things. It then consults the PUIS flag and, if disabled, it commands the motor controller IC to spin up the motor. The drive then accesses the hidden System Area (also called the Service Area or Negative Cylinders) on the platters and retrieves information such as the runtime ATA firmware, P-list and G-list (factory defects and grown defects), translator (to convert LBAs to physical Cylinder/Head/Sector), etc. If any of these modules are corrupted or inaccessible, then the drive powers up in a kind of "safe" mode. In this mode there is no access to user data. Sometimes the drive reports 0 LBAs, as is the case with some Seagate models that have corrupted G-lists or SMART data. At other times the drive identifies itself with its "factory alias" (eg ST_M13FQBL or ROM MODEL HAWK) rather than its actual model number. This alias is stored within the serial flash memory on the PCB.
    Milos on his blog (http://www.milos.ivanovic.co.nz/blog/218) explains similar problem and shows the solution how to perform a DIY repair of the HD. Unfortunately I am not sure if the fix applies to this case, and also, I do not have required hardware to perform the repair (and additional machine I could temporaily plug the HD to power it up)
    Lawrence, it would be great if you shared your experience on recovering the data from that drive. My gf does not want to turn her iMac to Apple service yet as she wants to get her data back from the drive. I am planning to run some data recovery apps against that HD, and if nothing, I will send the HD to Seagate Recovery Services and hope to get it done for free as it is their faulty drives.
    Thanks,

  • I can't recover from "recovery mode" what do I do?

    One day I attempted to turn on my iPad and a black screen should up and the little iTubes symbol pops up with a picture of a cable pointed towards the symbol.
    So I attempted to hook it up to my computer to connect to iTunes. I figured this was because I was supposed to update my iPad to the newest version but was procrastinating. So I figured this was why my iPad wasn't working.
    I connect my iPad and iTunes won't even recognize that the iPad was connected.
    My iTunes also wasn't working because it was 2-3 versions behind. So I went through this whole ordeal, I ended up having to completly delete and reinstall iTunes to get it to work. Finally I got version 11.2.2.3 install up and running.
    I connect my iPad 2 again and an error pops up saying:
    "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."
    ok. So that's the problem, my iPad 2 is in "Recovery Mode"
    So I go ahead and click the Restore button and it starts to download "iPad Software Update" which is a 1.06GB download.
    It downloads and gets to varying download percentages. The farthest it's gotten is 65.7MB out of 1.06GB. And it downloads super super slow. Starts off at an Est Download Time of 1 hour all the way up to 10 hours. I have a fast computer and good connection, I don't know the exact time of a regular large download, but I know that I've downloaded movies well over 2GB in an hour or less.
    Intermittantly the download will pause and it will give me the same error message as before: "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."
    All I have to do is hit OK and resume download. But eventually, another error will pop up which will end the download:
    "There was a problem downloading the software for the iPad "iPad". An unknown error occurred (9006)
    Make sure your network settings are correct and your network connection is active, or try again later."
    And that will be it. If I try to resume the download after that last error message, the download will start from the beginning.
    So as of right now, I have a $800 paper weight. And Apple wants me to pay them just to talk to someone.
    How the heck do I get my iPad 2 out of recovery mode!!!!
    Here is some info on my iPad if it helps.
    iPad 2   64GB  WiFi 3G
    Model A1397       EMC 2424

    1.Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
    2.Plug the device's USB cable into your computer only.
    3.Hold down the device's Home button as you connect the USB cable to it.
    4.When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
    5.Use iTunes to restore your device.
    Additional Information:
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself. If you want a faster way to solve iPad Stuck in Recovery Mode, try iPad data recovery software.

  • I have installed a new hard drive but can not recover from the HP 2 recovery disks

    My computer: HP Pavilion dv9825nr
    Windows Vista Home Premiu. SP 1
    My old computer (I have a new HP  laptop) had a bad hard drive so I bought a new hard drive  - 488599-001, as recommended by HP.
    When I try to restore using the diskds I bought from HP, I get an error: 0x400110020000100A.
    Windows does not recognize the hard drive and I read somewhere tghat the Vista restore disks are problematic.
    I'd appreciate any help you can give me. Good timing for expert day :-)

    Hi:
    If you think you did something in the BIOS, just set it to its defaults, save and exit.
    Here is what you need to do to make your own vista disk...
    If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
    Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
    Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
    The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
    The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
    When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
    I selected No, make the ISO file.
    It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
    I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
    When you enter the product key, it knows what version of Vista you have.
    http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
    After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
    Paul

  • How can I recover from a Botched BATCH DATE CHANGE in iPhoto?

    Botched Batch Date Change iPhoto08
    Short Story: Intending to change the date for one photo I managed to change the dates for all 8,525 images in my iPhoto08 library to the SAME DATE!! I found that the original creation dates were saved in the in the Modified field that appears in the Photo Info Window / File metadata subsection. I would like some help figuring out how to set the Date Created to this File Modified Date that appears in the Photo Info Window.
    GORY DETAILS:
    I used iPhoto08/ Photos menu / BATCH CHANGE... /“Set DATE to 20100723 1:20:54 PM” with “Modify original files” checked. iPhoto changed all 8,525 images to the same date.
    I now realize I should have used Photos menu / Adjust Date and Time ... But the damage was already done. Unfortunately there was no Edit menu / Undo for this operation. ALL 8,525 images have the same date. I checked in the the iPhoto Information sidebar--same date all images.
    Next, as a test, I dragged an image to the desktop and opened it in Graphic Converter7.0.3. The same date “20100723 1:20:54 PM” appeared in the Image Browser List /”Date Created”, “Date Modified”, “Date Captured” metadata fields.
    The following appeared in the Graphic Converter
    Image Preview sidebar (subWindow) going left to right
    Image menu/button
    Date and Time: Friday, July 23, 2010 1:20:54 PM PT
    Exif menu/button
    File date and time: 2010:07:23 13:20:54
    Date and time of original data generation: 2010:07:23 13:20:54
    Unknown tag (36868): 2010:07:23 13:20:54 <- significant?
    ExifTool menu/button
    ExifTool Version Number:8.40
    Warning: [minor] Suspicious MakerNotes offset for tag 0x9001
    ----System----
    File Modification Date/Time: 2010:07:23 13:20:54-07:00
    ----IFDO----
    Modify Date: 2010:07:23 13:20:54
    ----ExifIFD----
    Date/Time Original: 2010:07:23 13:20:54
    Create Date: 2010:07:23 13:20:54
    <<<<<<OH MY GOD >>>>>> the BATCH CHANGE / SET DATE not only RESET the date for EVERY IMAGE in my library, it also changed the date metadata EVERYWHERE inside each individual image file.
    Actually it's my Mom and Dad's iPhoto library containing all the kids and grand kids pictures, family trips, important events, everything. There is no backup. I feel as if I have tipped over a file cabinet containing all our photos. Our “date and event” organized 8,525 image iPhoto library was now as useful as a giant shoebox. On second thought, a shoe box full of real photo prints would be more useful than my iPhoto library because the prints would have the print date stamped on them.
    At this point feeling desperate I closed my eyes and said a quick prayer to Saint Rita - Patron Saint of the Impossible.
    I returned to iPhoto .................and noticed the Show Photo Info MENU item in the Photo Menu.
    I selected it.
    And Low and behold,
    in the Photo Info WINDOW,
    under the Meta data File SUBSECTION, the correct photo creation date appeared -->" Modified: 20071002 05:46:07 PM" I checked different photos ... They all had different FILE MODIFIED dates. These dates were/are the old creation dates! My prayers were answered: THANK YOU SAINT RITA!
    But now I am really stumped! This File Modified Date seems to be some kind of external metadata that is indexed or keyed to each image. How is this metadata stored in the iPhoto library? How can I access this File Modified date? I now turn to you GREAT iPhoto WIZARDS. Pray tell, how can I set the “Creation Date to the file Modified Date” that appears in the Photo Info Window as a (scriptable?) batch process.
    I am on my knees for this one...please help. we have iphoto11 but afraid to upgrade to it. until i know more i don't want to loose this Modified Date metadata.

    thanks for the quick response...
    no simple solution because no backup to restore from
    iPhoto seems to be using file metadata as some sort of index key in the
    Photo Info Window. open up the iphoto library package and take a look at
    the .xml file -- ModDate is used everywhere. hoping to export this data and merge/join it to
    each image.
    still trying to figure it out.
    thanks,
    Tom

  • How can I recover from the new Pages

    Does anyone know how I can recover a Pages file which has become locked into the new Pages program? I never edited it with the new Pages, but now I'm told I must have the new Pages to open it. I even tried opening it with the new Pages and converting it to PDF with the plan to copy and paste it into Pages '09, but i lost control of line spacing, etc. (It is a 4-column file of data on one page (in the '09 version, that is). Appreciate any help.

    Jay,
    Surely you did edit the file with Pages 5.2, or you wouldn't be having this problem. It's an easy mistake to make since both versions have exactly the same filename and extension. They are just stored in different folders. 5.2 is in Applications and 4.3 is in Applications/iWork '09.
    Use TimeMachine to locate a clean backup file.
    Jerry

  • Can't recover from recovery partition with OneKey after disastrous Win 8.1 upgrade

    I have a U410 that is only a couple months old. A few days ago I decided to take the plunge and accept the free upgrade to Windows 8.1.
    Big mistake.
    SInce the upgrade, I've had a slew of problems ranging from programs not running to hard disk integrity checks every time I restart the computer. I've already refreshed the computer (wiping all programs), with no luck. Now I'd like to restore from the recovery partition. However, when I press the onekey button I get the same behavior described here, and can't boot to system recovery mode.
    Based on some of the posts in this thread, I gather that any change in the partition sizes pretty much breaks the onekey software, but that sometimes restoring the factory partition sizes can cause it to work again. I haven't knowingly made any changes to the partition sizes, yet looking at disk management I am seeing more partitions than I would have expected (not sure if they were there before the upgrade since I've never looked before). I would like to know if there's any way I can regain access to the recovery partition--and if not, what my best bet is for undoing the damage the 8.1 upgrade did to my OS.
    Thanks in advance for your help.

    Dang, that's dissapointing. I did see it mentioned elsewhere that recovery discs are only $16 though. I had thought they'd be $100+ or something, so that aint so bad. I'll get on that.
    Thanks for your time

  • How can I recover from Windows login failure: User Profile Service failed the login

    I have Boot Camp installed on a separate partition on a MacBook Pro, late 2011 model. I have Mavericks installedd (10.9.1). I use, variously, both Parallels and VM Fusion to access the BootCamp installation of Windows 7.
    Except for having recently installed updates of both VMFusion and Parallels, I got this failure message when trying to login to Windows:: The User Profile Service failed the logon. User profile cannot be loaded.
    I had just been on Windows a few moments previously to access a business site that only accepts IE. Appreciate any useful insight on dealing with this issue without having to totally replace the BootCamp installation. A lot of the suggestions on Microsoft Windows repair sites are either incomprehensible or don't seem applicable.

    Same problem here. Windows 7 support gives several so-called fixes (including regedit tweaks, eliminating the blocked user account), but all require access to that partition. So far as I know, I have only one user, since this is my personal computer -- unless there is some sort of default "administrator" logon.
    Windows support says the problem might be caused by antivirus software running while we try to logon, but this problem has never happened to me before, and I have not made anti-virus changes (maybe AVG or Avast did so automatically)
    I tried to access regedit through Finder, but get a garbled text-edit with the message that regedit cannot be opened by DOS.
    So I wonder (a) is there a default admin logon? (b) Can we tinker with the settings inside Windows from Finder, or (c) how else can we get into Windows?
    My setup: Macbook Pro (Fall 2010), 10.6.8, boot camp, Windows 7.

  • Can't recover from time machine because missing space

    Hi,
    after having some issue with the hard drive of my MBP, I had to erase it. Now I'm trying to recover with a time machine save but when I get to install it, it tells me MACINTOSH HD doesn't have enough space while it's empty (280GO). What should I do ?
    Thank you

    Starting from a clean installation of OS X, set up a new administrator account and log in. Enter Time Machine and press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible.* Select the one you want and navigate to your home folder (in the Users folder at the top level of the old startup volume.)
    You should now be able to restore your user data. I suggest you do this in two stages. Quit all applications except the Finder before you begin.
    Restore all the visible items at the top level of the home folder.
    Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
    Any other invisible folders or files at the top level of the home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
    You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
    You'll have another problem because you erased the startup volume. The next time you back up, Time Machine won't recognize any files as being the same as they were before, and will make a full copy of all files. There might not be enough space on one or more of the backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set the backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
    *If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
              Browse Other Backup Disks...
    from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of the computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
              Show Time Machine in menu bar

  • Can StAX recover from CharConversionException?

    In our Oc4j project, we've got a UTF8 encoded input file coming from a partner company and it seems like they've sent a bad character (a lowercase e with a hat on it) in one of their recent files...
    The error I'm getting from Woodstox is:
    07/02/06 17:33:24 com.ctc.wstx.exc.WstxIOException: Invalid UTF-8 middle byte 0x20 (at char #1205, byte #37)
    07/02/06 17:33:24 at com.ctc.wstx.sr.StreamScanner.throwFromIOE(StreamScanner.java:683)
    07/02/06 17:33:24 at com.ctc.wstx.sr.BasicStreamReader.next(BasicStreamReader.java:1086)
    07/02/06 17:33:24 at com.xyz.quartz.jobs.ExternalDataTableListener.newRecord(ExternalDataTableListener.java:139)
    07/02/06 17:33:24 at com.xyz.quartz.jobs.ExternalDataTableListenerJob.execute(ExternalDataTableListenerJob.java:56)
    07/02/06 17:33:24 at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
    07/02/06 17:33:24 at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    07/02/06 17:33:24 Caused by: java.io.CharConversionException: Invalid UTF-8 middle byte 0x20 (at char #1205, byte #37)
    07/02/06 17:33:24 at com.ctc.wstx.io.UTF8Reader.reportInvalidOther(UTF8Reader.java:310)
    07/02/06 17:33:24 at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:201)
    07/02/06 17:33:24 at com.ctc.wstx.io.ReaderSource.readInto(ReaderSource.java:84)
    07/02/06 17:33:24 at com.ctc.wstx.io.BranchingReaderSource.readInto(BranchingReaderSource.java:57)
    07/02/06 17:33:24 at com.ctc.wstx.sr.StreamScanner.loadMore(StreamScanner.java:967)
    07/02/06 17:33:24 at com.ctc.wstx.sr.StreamScanner.getNext(StreamScanner.java:738)
    07/02/06 17:33:24 at com.ctc.wstx.sr.BasicStreamReader.nextFromProlog(BasicStreamReader.java:1995)
    07/02/06 17:33:24 at com.ctc.wstx.sr.BasicStreamReader.next(BasicStreamReader.java:1069)
    07/02/06 17:33:24 ... 4 more
    As a result of this one bad character, the entire "import file and break up into chunks, inserting each one into the database" process bombed.
    Obviously I'm talking to the partner firm to get their files fixed, but in the meantime, we'd like to make our import process a little more bulletproof. Specifically, I'd like to be able to tell the XMLStreamReader to somehow skip that bad character and proceed with the rest of the file import.
    Is this possible? I couldn't find anything in Google, in various Java/XML mailing lists, nor in any forums... Thanks!

    You can't find anything because compliant XML parsers are not allowed to modify their input in any way to "correct" errors in the data. Not well-formed, not parsed. That's a rule of XML.

  • Can i recover from grey screen without install disk

    i done an update on my iMac OS X 10.5.8 which required a restart when it came back on it only booted to grey screen with a question mark in the centre.
    I have no install disc

    If you are still on 10.5.8 probably not, however you can probably still get a replacement set of install discs from Apple. For a nominal fee they will ship them to you, all you need is a credit card and the serial number of the machine.
    However before going to those lengths, try doing a Safe Restart, this might work if it's not a hardware failure. You can get instructions by clicking:
    support.apple.com/kb/ht1455

Maybe you are looking for