I have installed a new hard drive but can not recover from the HP 2 recovery disks

My computer: HP Pavilion dv9825nr
Windows Vista Home Premiu. SP 1
My old computer (I have a new HP laptop) had a bad hard drive so I bought a new hard drive - 488599-001, as recommended by HP.
When I try to restore using the diskds I bought from HP, I get an error: 0x400110020000100A.
Windows does not recognize the hard drive and I read somewhere tghat the Vista restore disks are problematic.
I'd appreciate any help you can give me. Good timing for expert day :-)

Hi:
If you think you did something in the BIOS, just set it to its defaults, save and exit.
Here is what you need to do to make your own vista disk...
If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
When you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
Paul

Similar Messages

Problem: installed new hard drive but can´t boot from leopard dvd

So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
As an alternative I just tried booting the comptuer using the original CD and it did read it.
I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
Is it that my ibook g4 can´t be booted from leopard dvd?
Please advise. thanks!!

OK, so I decided to leave my computer resting all night and give it a new try this morning.
This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
- I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
- My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
Below is the information I get from coconut battery:
My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
The last system profiler I was able to pull shows:
Battery Information:
Charge Information:
Charge remaining (mAh): 58320
Charging: No
Full charge capacity (mAh): 58512
Health Information:
Cycle count: 256
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 16250
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
AC Charger Information:
AC Charger (Watts): 26
Connected: Yes
Charging: No
Any help is greatly appreciated.
Thanks a bunch!!!

Installed a new hard drive, but can't install mac os X

Hi! I need some help. I just installed a new WD320GB hard drive in my new macbook, but when I try to install OS X on it I'm not able to. When I get to the "select destination, Where do you want to install Mac OS X" screen, the new hard drive doesn't show up. What do I have to do?

Or you could have purchased a case to power the new hardrive as an external drive, plug it into your laptop, format the drive, then copy the old drive using Superduper! to your new temporary external hardrive. Once you transfer your old hardrive onto your new hardrive (external), you would then remove the new hardrive from its external drive case, then remove your old hardrive from the laptop, and then install the new drive into your laptop. It should work like a charm after that. The best part is that you can install the old hardrive into your external case, format the old drive turn that into a backup external drive. I hope this all makes sense.
Anyway, this was just an idea that actually works best.

New hard drive but can't boot from disk?

So I dropped in a new Travelstar last night, reseated all the connections, closed everything up, popped in the software disk that came with the powerbook (OS9) and tried to boot from the disk by holding down the "C" when starting up. No dice. The Screen is black, the drive just spins the disk intermittently and I don't hear the hard disk spinning. I'm guessing that means it's not the hard disk that was the problem. The original problem was that it would lock up and when I restarted it would either get stuck on the gray screen or just a black screen and the hard drive wouldn't spin, just the disk drive would spin. This last time it was just the black screen. Any suggestions?

Hi, rickDJ. Have you tried resetting PRAM and NVRAM?
I'm guessing that means it's not the hard disk that was the problem.
It sounds that way, but the clincher would be if you pulled the new drive and tried to start up from the CD without any HD in place, and got the same result. Then you could be sure neither hard drive was at fault.
One possibility is that the hard disk's short connecting cable is loose or has gotten damaged. Others are that the the optical drive's cable is loose or damaged, or the optical drive itself is dirty or damaged. If the problem persists without any HD or HD cable in place, my next (free) step would be to pull the optical drive and open it up, clean the lens with alcohol, put the drive back in place, make sure its cable connector is solidly seated on the logic board, and test again with the bootable OS 9 disc.
If you can't start the computer up from any bootable CD or DVD with or without a HD in place after zapping PRAM and manually cleaning the optical drive, there's not much more troubleshooting you can do. There are other possible causes of the problem, but they're not pretty $-wise, and you can't identify them by yourself under the circumstances.

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

What does "the registration won't let me" mean? If the serial number is rejected, contact support by web chat. for anything else you need to provide proper technical information and actually explain your issue.
Mylenium

My laptop harddrive crashed. I have installed a new hard drive. I want to retreive all Firefox bookmarks and History. Is it possible? I use windows XP

I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like to retrieve all by previous bookmarks and HISTORY.

https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Win XP and W2K: <br />
''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name''

New hard drive. Will not boot from install dvd.

Earlier this week, I dropped my computer.
It was probably a 3 foot fall.
Computer froze, so I restarted and got the flashing folder with question mark.
Started in internet recovery, and disk utility confirmed that I had killed my hard drive.
Got a new hard drive and installed. Started in internet recovery, formatted hard drive. Disk utility says it's good to go.
Was given the option to install Mavericks, but keep getting an error message.
Attempted to restart from install dvd that came with the MBP. Tried every startup shortcut there is.
Optical drive recognizes the disk, but I always get stuck on the gray screen with the wheel.
Reset PRAM. Reset SMC. Same problems. I do not have access to another mac or a PC with admin rights.
I'd rather not brave the Apple Store this weekend in the snow in a town that never gets snow (people drive poorly on a good day!).
Any tips?
Got the MBP in 2010, new. Was running mountain lion when I dropped it.
Thanks!

Yiou can't use Internet recovery on a 2010 Mac notebook to install any version of OS X on it. That is why you are getting that error. You have to use the original System reinstall discs that came with it to install OS X on a new drive or use the OS X reinstall disk to restore from a time machine backup.
Since your system doesn't seem to want to completely boot from that disc you should try an external DVD drive that connects by USB port as the built in superdrives are known to fail or partially fail at any time. Don't buy an Apple external Superdrive as they only work on Mac computer that did not originally come with a built in DVD drive. Any Brand external DVD drive will work on your Mac except Apples own external DVD drive.

I want to replace my Mac Pro, original Hard Drive but can not slide it out to replace.

I have copied my Original Hard drive and place a larger drive in a open slot in my Mac Pro, Now I want to take out the Original Drive, but the tray does not slide out. Does any one know why? I got my Mac Pro June 2007. It has two Optical drives and I have filled it with 3 internal Hard drives and 8 gig of memory. all this works and the new Hard drive works just fine, but now want to replace the Original Hard drive, and it will not slide out. any Help?

Make sure you set Startup Disk control panel to the drive you want.
Clone the drive to another drive and have a bootable backup.
SuperDuper, etc to clone.
Repair the drive (from another drive or DVD) and repair permissions (maybe).
Disconnect externals just to rule out.
Ideal boot drive has just OS and applications.
Limit login items.
Startup should be 30 seconds with WD Black 640GB and up.
Note: never mentioned what you planned to use, or how you cloned or setup the boot drive.
What matters is the drive is latest generation, probably 64MB cache (32MB also).
People use SSD 120GB or 10K 150-600GB WD VelociRaptor but most popular is WD Black 1TB probably.
Carbon Copy Cloner 3.4.1
Clone X 4.0
SuperDuper
How To clone
Using Cloning as a Backup Strategy

For those who have installed a new hard drive...

Like many of my fellow Mac-Heads, I am running out of storage spae on my little G4 12-inch. I have the 80G Fujitsu and would like to upgrade for more space. There are some 120G notbook drives on sale right now, and my scenario would go something like this:
1. Get the 120G Samsung ATA drive
2. Buy an eclosure to make the new drive an external drive
3. Run Disk Utility and copy my 80G drive contents onto the new 120G in the enclosure
4. Follow the online steps and intall the new 120G drive into the drive bay in my little G4 12-inch (looks fun and do-able!)
5. Run this configuration for a while, maybe a few weeks, and make sure it is all kosher with the new 120G drive inside.
Once complete, this would give me a new 120G internal drive and a whole 80G drive of external storage.
Problem is, I am not sure that it would work. You see, the 80G drive is partitioned and do not know how this would affect my swap.
Has anyone tried this, and what effects, if any, would I incur in the trade? How would the formatting of the new 120G drive be affected, aside from the usual "loss" of a few Gigs in the formatting process? Would it end up only being able to see the size of the original drive? (I am technically competent in the physical swap so that is not an issue.)

I did this about a year ago, but I went from 40 to 80gb. I pulled the 40 out and installed the 80. I put the 40 into a firewire enclosure. I installed a fresh copy of 10.4 onto my new 80gb. And then I transfered all the files I needed from the 40 to the 80 - i.e. back onto my powerbook.
I was lucky in that I went from 5400rpm to 7200rpm and my little revision A 12" seemed zippy again. - till I crammed it full again within 6 months. The real solution is to have a honkin' external hd to keep the really big files on.
Of course, I backed up the 40 on a separate 40gb external before I began.
Haven't looked back and I now have a small 40gb "rescue" disk.
PB 12" Rev. A Mac OS X (10.4.7)

I have 2 external hard drives, but can not view photos from 1 hard drive in LR5 now. I used this hard drive in LR5 before, but now it does not show up. How do I get the hard drive to show up in LR5?

Any ideas on how to connect hard drive back into LR5?

Hi:
Let's see if I can help you, help me. Operating system is OS X, version 10.8.5.
The photos on hard drive (1) have never been removed from Lightroom (or have they?)They have not been removed from LR.
Could you explain why hard drive (1) stopped appearing in Lightroom, it must have been because you did something, otherwise the photos on hard drive (1) will still appear there.LR always worked great, until I had to upgrade my operating system to get LR5 to work. Then it has been one problem after another.
So, once I ran into this problem and before we started to chat….I simply RE-imported all the photos from (1). They came in fine, except none of their key words came along with them. So my ability to find anything is "0". It was bad enough to have to do the import all over, but the thought of having to re-tag 1000"s of images is overwhelming.
Thanks for your patience.
Kathy

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

Can anyone help. I need to reuse my SDHC cards and transfer footage from an ongoing profect to a hard drive. Can i edit from the Hard drive or am I better transferring info striaight from camera to time line

Hi I am using a JVC GY-HM100 camera which is meant to work well with final cut pro. I have an ongoing project but need to save money and resuse the SDHC cards that are currently full of footage.
Would I be better off transferring the footage straight to the time line (as rumour has it you can do this with this camera) or store the footage on a hard drive and edit it later without risk of losing the footage.
Many thanks
Lindabob

Thanks Linda,
Here's some more info for you:
This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
Make sure you're using the latest version of the application - FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.3.
Check that you have at least 20% free space on your system drive.
If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system. Do NOT import any of the settings etc from the old account - simply use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended - but remember, if you reinstall the system, and then use Migration Assistant (or anything else) to import all your old settings etc etc, you may well be importing the cause of the conflict in the first place.
Keep projects to 20 mins or less (about half that for Multicam). If you have a long project, work on short sections, make them into Compound Clips and then paste these into a final project for export.
If you ever experience dropped frames, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
http://assistedediting.intelligentassistance.com/EventManagerX/
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

I had to install a new hard drive and am trying to reload the songs off my ipod

trying to reload the songs off of my ipod to itunes now that i am back up and running. tells me i am synced to another itunes library (the wiped one) and basically wants me to wipe my ipod and start over. I don't have any songs in the itunes as of yet. is there a way to avoid a wipe and reload. that would take days to accomplish! please help!!!

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Dear Guys, I have installed Kindle on iPhone 2G but can not copy PRC file into my iPhone. I am using one software allows access root of iPhone.

Have you met the above problems? Please help me in order to copy PRC file into iPhone.
Thank you so much.

This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

How do I put content from my iphone back into itunes after installing a new hard drive?

How do I put content from my iphone back into itunes after I have installed a new hard drive on my computer?

See Recover your iTunes library from your iPod or iOS device.
tt2

I have installed a new hard drive but can not recover from the HP 2 recovery disks

Similar Messages

Maybe you are looking for