Can scrambled video be related to bad sectors on hard drive?

I bought my iMac refurbed from Apple, and it had to have both its logic board and power supply replaced four months later. That was a year ago, and in December it started exhibiting problems that I thought were related to the logic board: scrambled video at startup (a kind of multi-colored plaid on the screen, or strange distorted blocks on the display); kernel panics; slowdowns, crashes, and freezes in all applications, including the Finder; and refusal to shutdown. Since this iMac is out of warranty, and I did not purchase AppleCare on it, I had resigned myself to buying a new Intel iMac when the G5 finally died. This although it passed the Apple Hardware Test.
Today my AppleCare kit arrived for my Powerbook G4, and just for a lark, I thought I'd run TechToolDeluxe 3.1.1 on the iMac, not expecting it to show anything. To my surprise, it reported 14 bad sectors on the surface scan of the hard drive. (It passed all the other tests.) This would actually be good news, because I could buy a new hard drive for $65 or so from OWC and install it myself.
But my question is, how could bad sectors relate to the video issues I've experienced intermittently? Is it simply possible that both the logic board and the hard drive are failing?
Thanks for any insight or advice,
Nancy
iMac G5 17-inch ALS Mac OS X (10.4.8) 2 Ghz, 1 GB RAM

Miriam,
I was afraid that would be the verdict: the strong possibility that both my logic board and my hard drive are failing. Sigh! And unfortunately my rev B iMac (17-inch ALS) is not covered under Apple's Extended Repair program, which is just for 20-inch models. Another sigh. Although it would cost me only $75 to replace the hard drive on this iMac (these non-Intel ones are user-serviceable), I'm not sure that I wouldn't be sending that money down a black hole if it's just a matter of time until my logic board gives up the ghost.
So I'm trying to decide whether to it's time to buy a new iMac now.
Thank you so much for your input. I really appreciate it. And I hope you've dug yourself out of all that snow!
Nancy
iMac G5 17-inch ALS Mac OS X (10.4.8) 1 GB RAM, 2 Ghz

Similar Messages

Bad Sectors in hard drive

Hp pavilion g6-2165sx is the product and there is bad sectors in it's hard drive. Can you please tell me the solution to resolve them.

Replace the hard drive.

Remapping Bad Sectors on a Drive

Remapping bad sectors - back in the days of SCSI drives - you were able to do what was called a " low level format " which would in effect remap bad sectors on the drive.
I don't see a way to do this with newer software such as disk utility etc.
Example: a friend of mine accidentally tripped the cord to his hard drive in the middle of the drive writing to the disk. Of course this is bad. Remapping the bad sectors would insure that the drive was working properly and not use any potential bad sectors.
Q: How can we remap bad sectors on today's ata and sata drives?
Thanks in advance for your help - RevDave

I don't know if it's anywhere in Apple's documentation, but it's a standard technician practice for that purpose. Here's what Dr Smoke says about it in his X Lab site:
The process of erasing a disk, partition, or volume by writing zeros to every bit on such is called zeroing. Zeroing finds bad sectors and maps them out of service, also known as sparing. When an attempt to write zeros to bad sectors fails, the bad sectors are both marked as occupied in the directory and added to the bad blocks file of the file system. Once the bad sectors have been spared, no attempt will ever be made to read-from or write-to them again.
Matt
2.5GHz|3.5GB G5, 1.5GHz|512MB PB12, iSight, 4G iPod Mac OS X (10.4.7)

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
He has made a comprehensive list, browse through them and decide which suits your requirements.
Have a nice day!

How can you download photo's and video's from an iPad to external hard drive

How can you download photo's and video's from an iPad to external hard drive for storage.

Here's the link that explains ...
http://www.idownloadblog.com/2014/06/02/apple-updates-the-photos-app-in-ios-8-to -work-with-icloud-photo-library/

I had a windows laptop, and I save files like photos, documents, videos and other things on an external hard drive, and now I want to move those files to the Mac book Pro, and then move those files again to another external hard drive 1T. My question is:

I had a windows laptop, and I save files like photos,documents, videos and other things on an external hard drive, and now I want tomove those files to the Mac book Pro, and then move those files again toanother external hard drive 1T. My question is: Is it possible? Doing this willnot affect the files that I had in windows? No information is lost? or how cani do it?

Connect the external drive to your Mac and drag the files from it to your Mac's internal drive. Then dismount and disconnect the external drive, connect the 1TB external drive, and drag the files from the internal drive onto the external. Nothing will have been deleted from any of the drives up to this point; the files will only have been copied. Verify that the files are readable. There's no reason they shouldn't be; this is just a precaution.
Now if you wish to delete the files from any of the drives, drag them to the Trash, and Empty the Trash while the drive from which they came is still connected. If you disconnect the drive before emptying the Trash, the files you were trying to remove from it won't be deleted. They'll remain in the Trash and continue to take up space on the drive.
Note that if your external drives are in NTFS format, you won't be able to write anything to them or delete anything from them, though you will be able to read and copy the files they contain. The NTFS disk format is read-only to the Mac OS, unless you have a third-party NTFS driver installed. To make your drives cross-platform readable and writable, you must reformat them in the FAT32 or ExFAT format.

Can't get computer to see galaxy note 3 hard drive?

can't get computer to see galaxy note 3 hard drive?

One last thing to add into the mix.
As you know your Router will have to probably need to be manually confiqured.
Your Router has an IP address of 192.168.1.1
The 1st port to the first machine should have an IP of 192.168.1.2
The 2nd port should have 192.168.1.3
Each corresponding port needs to have assending IP addresses.
Checking the paperwork that came with your Router will explain how to manually confiqure it.
Sometimes a complete System reset will also help.
Modem Router and Shutting off all the machines.
When powering back up start with your ISP's Modem and after it has aquired the signal and lights then you can power back your Router, and the same there wait for it to reacquire the signal and the lights each will take a minute each. Now you can restart your computers one at a time and try them. You might want to double check the cable on your troubled machine and also try switching the ports on the router and if none of this works it sounds like a bad Ethernet Card.
Don

Can you move your system onto a new, larger hard drive?

OK, so I bought a 4 GB RAM upgrade and a 320 GB 7200 rpm hard disk to beef up my Mini. But it has a lot of apps installed and I don't relish the thought of re-installing it all from scratch. So my question is - Can you migrate the entire system onto another, bigger hard drive, realizing that it will go onto a larger disk partition than it came from? Right now I have the 320 GB disk in an external USB case. So can I back everything over to this USB drive and make it bootable and then swap the disks?

OK campers. This is how it went down. I bought an IOGear external eSATA case for the 320 GB drive. After fooling around a bit I finally figured out how to get the drive initialized so it showed up. I then downloaded SuperDuper and backed all files from the old 120 GB over to the new drive. I selected the new drive as startup disk to make sure I could boot from it. Having successfully done that, I went to Other World Computing's site for Mini Upgrades, and played their installation video on my laptop. I followed the video instructions and had the new RAM and hard disk installed in about 20 minutes. One thing they don't use in the video is an anti static wrist strap. I had one and used it. I highly recommend to all attempting this, to get one at Radio Shack. They are a cheap insurance against damaging your Mac with static electricity. All in all, this was an easy upgrade and I am writing this on the "new" Mini, which is running sweet, with lots of 'elbow room'.

Can I save my movie projects to an external hard drive?

I am an elementary music teacher and often make DVDs of my students' performances. This is maxxing out my hard drive on my Mac. I have an external hard drive with a lot of memory, so my question is: can I somehow put iMovie projects onto the external hard drive, to free up memory on the Mac's hard drive? If so, how do I go about doing this? Conversely, would this be a bad idea, and if that is the case, could I move iTunes (also have a ton of music, as you can imagine) or iDVD to the external hard drive? Or iPhotos?
I'm not high-tech savvy, so need help in simple English, please.
Thanks so much!!!

Within the project library of iMovie you should see your external drive listed along with the projects stored on your mac. To copy a project you simply drag the project from its current position to your external drive. You will then get the option of copying just the project or project and events. As Bengt rightly states you should copy both project and Events. If you hold down the alt key as you drag the project you will get the option of moving rather than copying. I would NOT recommend doing this in case there are problems during the copying/moving process (I don't find iMovie to be the most stable of apps) and you might find the original project has been deleted without properly copying it across. Better to copy to the external drive, check it works ok and then delete original.
Hope this helps.
Russ

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

My hard drive that is sync to my ipad crashed! Good thing is all my photos were transferred to my ipad for viewing - now my quesiton is how do I back up my ipad on another computer without losing my pictures? can I back up my ipad on a external hard drive

My hard drive on my computer crashed! This is the computer my ipad was sync with! All my photos of my three girls are on the ipad, but how do I get them transferred to either an external hard drive or to another computer - or just have them all printed - nearly 1000 photos!
Also, can I back up my ipad with an external hard drive? If I try to sync to a new computer it will erase everything I currently have on the ipad , correct?
Thanks for your help - I am worried if I don't do something quick, my ipad will crash too!

Right. You didn't read the post, you only read the title.
The title came from an earlier step in the process when I was posing a question to the systen.
The pertinent part of the question is "How to I back up documents that are stored in iCloud"
That the destination for the backup is NOT my internal HDD should be clear from the rest of the post.
And frankly, even if that is where I want to back up to, that would at least give me two copies, at least giving me one duplicate of the stuff on iCloud.
So please stop wasting my time if you can't answer the actual question: How do I backup content that is stored in iCloud. The destination of the backup is irrelevant.
--P

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.
I checked my secondary harddrive and there is plenty of memory.
I emptied my burn folder but the photos still will not drop into it.
I created a new burn folder, no luck with this either.
230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
I have shut down and restarted my computer.   No change. The photos still will not drop out of iPhoto.
My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available. It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
I have never had this problem before. It is usually very easy to move my photos from iPhoto.
I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.
Thank you so much for any help you can provide.
I really appreciate it.

YES Terence! Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option.
I don't have the time tonight to export and burn a lot of CD/DVDs. I'll try that tomorrow and make sure my photos are moving properly. I also need to export photos to my external hard drive to make sure that route is working.
Wouldn't you know that my Apple Care Plan runs out this Wednesday?! I need to make sure everything is working properly before that expires.
Thank you so much for your help.   I really, really appreciate it.

How can I export my iTunes Library to an external hard drive?

How can I export my iTunes Library to an external hard drive? and once i do that how can i play the library through the external drive? I basically want to be able to delete all my music on itunes once it is on my external hard drive so i can have more internal hard drive space.

Follow this guide very carefully: http://support.apple.com/kb/HT1364?viewlocale=en_US
It's very easy to do....

Can scrambled video be related to bad sectors on hard drive?

Similar Messages

Maybe you are looking for