Can SMD be setup to monitor the Managing System?

Hello, We have been working off and on for the last few months
installing Wily Introscope, which in turn required E2E RCA, which in
turn required SMD to be installed. Since virtually all of our systems
are on a relatively low pl of the kernel, 114, we also installed the
latest SP and kernel to our Solution Manager system. So, the SM system
is at 7.00 pl 146, and SPS 16 (it's a dual-stack UNICODE system).
However, every other of our almost 27 ABAP stacks are at pl 114,
unfortunately.
We had read, via SAPNet note 1126859, that the MANAGED system must be
at least at kernel 7.00 pl 121. As I saidl, only our MANAGING SM
system is at that level. So we thought that we'd try to have SM
monitor itself, in the context of SMD and Wily Introscope.
Unfortunately, we got stuck at setting up the trusted RFCs for the SM
system to monitor itself. SAP AG's instructions for setting up the
trusted RFCs is in the following guide: Root Cause Analysis
Installation and Upgrade Guide (v3.30 - July 2008), section
6.3.2 "Setup RFC Destinations to Managed Systems". Transaction SMT1
doesn't permit 2 RFCs with the same target <sid>.
So, our questions:
1. Can a MANAGING system also be a MANAGED system?
2. If so, would you kindly clarify how to configure the RFCs for that
scenario? Or perhaps we don't use RFCs in this scenario?
For now, we will move on and try to setup Wily/SMD for a Java-stack
system we have available (Portal).

Hi Felipe Pitta,
The Managing system can be managed, for that include your Solman in a solution and proceed all the needed activities like Agent installation, Wily agent setup etc as you do for the managed systems.
You need to create RFCs to the BI client of the solman if you are the same BI component which is available in Solman (001 is your BI client) or RFCs should be created for the BI system which you are using.
WEBADMIN RFC will be created automatically during SMD Agent installation.
By this your solman's data will be collected.
For furthur clarifications pls revert back
regards
Naveen kumar

Similar Messages

The definition of the READ RFC to the managed system could not be found. Pl

Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PM

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Not find EWA Session in the managed system

Hi all,
I am configuring SOL 7.1 for EWA.
I have configured SDCCN both on Solution manager 7.1 and Managed System.
In the solution manager, i can find EWA session for managed system.
The question is : When i run "Refresh sessions" on the T-code: SDCCN of Managed system, it can not retrive EWA session where exist on the Solution manager.
How do i do? Can someone help, please.
BR
Wu

after reconfiguration in new client,
Follow Note 727998 - Complete Replacement of Service Definitions for SDCC/SDCCN
step 1 :
in the solution manager:
1.1 run report BDL_DELETE_ALL_TABLES in SE38
1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
       Ensure that connection 'NONE' and SDCC_OSS is maintained, and that the 'master'
1.3 Execute a "service definition refresh" in SDCCN
1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
1.5 Create a new periodic task 'Maintenance Package' in SDCCN
1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
        Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
1.7 Execute "refresh session" in SDCCN
step 2:
in the managed system:
1.1 run report BDL_DELETE_ALL_TABLES in SE38
1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
       Ensure that only connection SM_<SOL>_BACK' (delete SDCC_OSS )is maintained, and that the 'master'
1.3 Execute a "service definition refresh" in SDCCN
1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
1.5 Create a new periodic task 'Maintenance Package' in SDCCN
1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
        Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
1.7 Execute "refresh session" in SDCCN
Best Regards,
Wu

Can anyone tell me where I can find a beginners guide to the filing system?

Can anyone tell me where I can find a beginners guide to the filing system on the Macbook Air iOS 10.9.4?

So, does this mean you have given up and decided to return to the MS Windows (PC) embrace?
The link that dominic23 provided has parts 1, 2, and 3 — did you review all of these? What remaining question(s) do you have about the Apple file system?
Videos that you may find on the Apple site are not updated regularly, and steps/techniques shown in them may be outdated, or not work as shown on the current operating system release.
Did you look into the Apple Retail Store One to One learning assistance?
Did you consider either of the following books as a learning aide?
Switching to the Mac: The Missing Manual, Mavericks Edition
OS X Mavericks: The Missing Manual

HT1338 where can i get replacement discs of the operating system ...that originally came with my md311 17" macbook pro?

where can i get replacement discs of the operating system ...that originally came with my md311 17" macbook pro?

Call Apple and give them your serial number and they will send you the disks for a nominal charge.

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have never seen this before. Try using these installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

How can I make an external monitor the main display?

I have a mid 2007 iMac running OS X 10.4. The internal monitor is broken and all it shows is a bunch of lines.
I have connected an external Samsung monitor. All I see in it is a desktop background: no icons, no menus, no dock. I believe this is because the display is in extended mode and the main display is the internal monitor. I cannot use the System Preferences Panel to change this, because the internal monitor is useless.
I have a second, newer iMac, from which I can login to the first via ssh.
Is there a way to make the external monitor the main display from the command line?
(I have though of editing the Preferences List, but I do not know what to change and how to change it. I do have Developers Tool installed and thus can access the Preferences List Editor.)
Thanks in advance!!!
Gustavo J. Mata

Hi everybody!
To solve the problem I wrote a script that creates a Systems Preferences windows which shows up in the external monitor. Once this happens the configuration can be changed manually, to make the external monitor the main display. This is what I did:
First I created a user with automatic login in the faulty machine. To do this:
1.- Restarted this malfunctioning iMac in Firewire Target mode.
2.- Rebooted the working iMac using the other machine as startup disk.
3.- Created the user.
4.- Restarted both machines normally
Next I wrote a script which opens System Preferences and shifts its window to the left:
5.- In the working machine I saved the script as a 'Run only' application:
tell application "System Preferences"
activate
set x0 to 1080
set y0 to 200
set dx to 800
set wx to 600
set wy to 600
set the bounds of the first window to {x0, y0, x0 + dx + wx, y0 + wy}
end tell
6.- Then uploaded it to the iMac with the faulty screen.
7- Shut down both machines.
Then I added the script application to the automatic login user in the faulty machine:
8.- Restarted the malfunctioning iMac in Firewire Target mode.
9.- Rebooted the working iMac using the other machine as startup disk.
10.- In System Preferences added the script to login items.
11.- Restarted both machines.
The System Preferences window now showed in the external terminal. I was able to go into the Displays pane and set the external monitor as the main display (dragging the white bar to it).
Cheers,
Gustavo J. Mata

Why can't I access my apps. the manager isn't working??

My Manager, and cloud apps will not open., I get the same message theres an error on anything that is cc. I have been told this is not an error message. I don't care what it is please can anyone tell me how to fix it as I cant use illustrater or photoshop and no doult anything to do with cc.
Error
There was an error with this action. Try again later.
b6808cc6-135b-4f7f-933f-4a1274bac3b9

Hi Ashish, I don't know what i did but I was reading through some of the old post and this one stood out so I clicked on it and got my cloud back and I think my apps are updating, silly how a little thing like that can be so exciting. hopefully it has corrected itself.
, 2012
1.Romsinha,
Aug 26, 2013 12:59 PM in reply to Monsieur_G
Report
Hi Monsieur_G,
The new Creative Cloud Desktop App looks like a nice and integrated replacement for both the Adobe Application Manager and the Creative Cloud Connection. If you are an existing user of Creative Cloud and are already using the legacy Creative Cloud Connection then you might want to update it using the Adobe Application Manager. To do this, Open the Adobe Application Manager and look for new updates, it should find the new Creative Cloud Desktop App and download it, and install it for you. The older AAM will automatically update itself without any need to uninstall it manually.
Regards,
Romit Sinha
I posted this for anyone else that is having the same problem. This may be the trick after deleting the opm.db file. I found the install box the same as the manager pict. and click on that when it had uploaded i just closed it and it worked. fingers crossed. Thank you again.

Unable to setup DBAcockpit connection in managed System Conf.

Hi Guys,
I am trying to set up DbaConnection in managed System Conf for local solman system.
Its Showing red status and also the fields are not changeable now.
I am on kernal 720 level 300.
error shows the No DBSL lib found and gives the note number 1458291.
I have already downloaded the latest verion of dbsl (324) and extracted in C:\usr\sap\PDI\SYS\exe\uc\NTAMD64.
I have already applied the note 1604209 but still the same error.
i am solman 7.1 sp06 with MSSQL 2008 R2.
Please advice how to proceed.
Thanks

Hi,
Please kindly check in 'Agent Administration' if SMD Agent is running and
conected to SolMan if you can't see the Agent please check if it is
visible in SLD, if it is please connect it to SolMan and then run
setup again. Otherwise please uninstall SMD Agent and install it again
conecting it directly to your SolMan using HTTP Connection via Message
Server.
You may want to refer to the 'Diagnostics Agent Setup Guide' available at
https://service.sap.com/diagnostics should be very helpful.
As per the mentioned note: Please refer to SAP note 1232928
You switch to the DBA Cockpit that has the authorizations to
configure the back end, and you uninstall the back end there. You can
then reinstall the back end in the new instance.
You can see on "Screen Performance -> Performance Warehouse ->
Configuration" which DBA Cockpit currently has the authorizations to
change the back end. The SAP system ID of the relevant DBA Cockpit is
specified there in the line for the "Monitoring DBA Cockpit".
You need to switch to the dba cockpit that has authorizations to
change the backend system then uninstall the backend, and then you can
do this configuration step without the above error.
Hope this helps.
Cheers
SH

Do we need to setup traditional ABAP Transport Management System on XI?

I was confused that do we need to setup ABAP transport Management System on XI, since the IR and ID object will use CMS or File to transport between DEV->QAS->PRD. If we still need, could you pls let me know why we need it?
one more question is: if we maintained some parameter in XI dev, say, we maintained Integration Server patameter to let system can moniter Syn message, if we want this paramter used in XI QAS, is that the only way to maintain it mannully in QAS, or we have other way to make it? thank you for your help

Zhang,
You are absolutely correct. You transport all your ID and IR objects using CMS or File transports.
But lets suppose you have developed some zprograms or abap mapping in XI. This basically reside on the ABAP stack. So for this objects to transport we will follow the procedure what we do normally to transporting the R3 objects. So what ever you develop on the ABAP stack we need to transport to QA and to Prod using ABAP transport system.
---Satish

I can no longer edit my custom content management system using Firefox

Hello,
I work for the University of North Carolina. We have a very old custom content management system that is built in Oracle (UCM). When logged in, it has little edit buttons that allow you to click on items and launch edit windows. I don't know what's behind that -- it's not Java. I'm thinking javascript? All I know is that since the Firefox upgrade to 13.0.1, the edit buttons no longer display, and the sites are not editable.
So far, the only way we've been able to allow people to edit their sites is by forcing them to use IE9 in compatibility mode. All other browsers fail for various reasons. Firefox is our workhorse browser, but we're desperate to have Firefox back.
I understand we also have some problems with our Remedy application -- not sure what's happening, but it's also no longer functional in Firefox. I'm wondering if there is a patch in the works that will address these issues?
BTW, it sounds a lot like this issue here: http://support.mozilla.org/en-US/questions/930042

Drat... So, we tried taking out the javascript entirely. No real change, except lightbox actions would not function. Then, we tried referencing a different javascript version. No difference, except that lightboxes and Carousels still would not function.
To see if the $ error was universal across all of our sites, I logged into four or five other UCM sites. None of them threw the $ error, only the Art site. What's interesting is that for all sites, you can see editable areas if you look for them (e.g. mouse randomly around the areas where there used to be buttons to click on), but the icons continue to not show up.
The warnings coming from the console seem fairly benign, and it's only the Art site that throws a definite error. The only thing that seems consistent across all sites is the warning: "server does not support RFC 5746, see CVE-2009-3555".
Any other thoughts? I'm not sure a guest logon would help, but I can certainly pursue that line of action if you'd like to dig a little deeper.
Thanks in advance,
- Veda

Can sap tutor player execute in the vista system?

i have installed the sap tutor in the vista system . but when i use the sap tutor player to open .sim files it will be shut down by the system .
how can i solve the problem ? the sap tutor can not be supported to execute in the vista system?
thanks

hi lion
after installing, before executing the SAP tutor, you must follow the steps that mention below, must first in the compatibility tab of the program select compatibility with Windows XP SP2
Windows Explorer --> folder c:\PlayerIE right click on file iTutorplayer.EXE --> Properties --> compatibility tab --> select compatibility mode = Windows XP SP2, save and play your tutors
regards
Rao

Can not find my website in the management portal, but it is still showing it exists when i want to publish to it

I created a site it vanished from my portal, and I no longer have access to it although it shows it exists under azurewebsites.net.
what could happened?

Hi,
First, check your Azure portal, do you log in with the corresponding account? Could other sites in your portal run normally? If everything is correct, I think you need to contact with azure support, here is the support channel:
http://www.windowsazure.com/en-us/support/contact/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error While running Setup Wizard in SolMan Managed Systems

Hello,
I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
Any input?
Regards,
Ray
Failure with Message Server
An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
ted exception is:
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
connection has been established.)
Please check Message Server host/port, or enter the P4 ports in cluster table.

Hi furious
I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
after that you prepare your organization and It will works
cheers....................

Can SMD be setup to monitor the Managing System?

Similar Messages

Maybe you are looking for