Can somebody give me an appreciation of the crp8337 owc bluetooth keypad matching the Apple bluetooth keyboard?

You can upgrade memory and the hard drive. Nothing else is user-upgradeable. All processors are soldered to the motherboard.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
You can see HDD and SSD options at OWC. Reliable RAM vendors are OWC, DataMem, and Crucial.com.

Similar Messages

Can somebody give me the formula for the balance column in a check register please? I am trying to setup like sample in iWork but am missing something.

Can somebody give me the formula for the balance column in a check register please? I am setting the register up like the sample in iWork 09 but I seem to be missing something in the formula.

OM,
The way the checking account balance column works is to designate one cell for the starting balance, indicate income with positive figures and outgo with negative figures, summing the transactions and adding the sum to the starting figure.
The formula used, =$F$1+SUM(OFFSET(F3,3-ROW(),-1,ROW()-2)), is not too difficult to understand if you study the syntax for Offset. The author of this template didn't do us any favors because the expression could have been written more clearly, in my opinion. I'll explain how it's done in the template, and then how I would have written it. With the two approaches you may be able to see what it's all about.
$F$1 is the starting balance.
SUM requires a Range specification.
Offset provides the range specification. The syntax for Offset is as follows:
Base Cell. In this case it is F3, the cell the expression is written in.
Row Offset. In this case the author takes the current row number and subtracts the starting row from it. For the first balance the offset will be zero since the first balance is in row 3. For all the subsequent balances, the offset will be negative, meaning that the offset will point to a row above the current row.
Column Offset. In this case the column offset is 0. That means that it is pointing 1 column to the left, Column E.
Rows. This parameter sets the length of the range, in rows. Subtracting 2 from the current row number means that the range will be 1 for the first balance and will grow by 1 for each entry down the list.
Taking all this into account, the range for the Sum function will always be Column E from Row 2 to the current Row.
How I would have written the balance expression:
=F$1+SUM(OFFSET(E$3,0,0,ROW()-2))
I believe it's easier to follow.
The starting balance is still in F1, but only the row needs to be absolute - a fine point, I know.
In my expression the base cell for the Offset function is the first entry cell of the transactions, E3. The row needs to be absolute, there is no reason for the base cell to move about as it does in the author's version.
In my approach, both the row and column offsets are zero. We always start at E3.
In my approach, the number of rows in the range is the current row number minus 2, just as in the author's expression. That means we include all rows from Row 3 to the current row.
I'd be happy to answer any other questions about the specifics, but you need to be specific about what you don't get.
Jerry

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

Can we give an option of having multiple PLDs to user to select the PLD

Hello Experts,
Can we give an option of having multiple PLDs to user to select the PLD from list, when it selects the PLD, it will opened.
One option is to choose the the PLD from Layout Designer windows, as we can make it default and then open it. I don't want to give right to user to make any PLD default ....
But I am looking for option as it ask me at run time when I press the Preview button.
plz tell me

Hi
You can make one PLD default for current user
Regards
Rashid

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
Does anyone have any suggestions on how to solve this probelm?
Here is the error:
The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">

I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
Hi,
I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
{"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
I do have windows Activation Features installed and I am using .Net Framework 4.
Thanks
Sofia Khatoon

The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

I have a Windows Phone Silverlight 8.1 project that i am trying to publish
The publisher in the uploaded package does not match the
expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
I have the same Publisher Id set in the WMAppManifest file
help me
thank you

Hi kadir u,
>>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
<Identity Name="*******"
Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Version="1.0.0.0" />
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The publisher in the uploaded package does not match the expected publisher.

I have an existing Windows Phone 8 application in which I wish to release an update to. This update includes new features as well as targets the 8.1 platform. Because of an unknown problem with the original Visual Studio project
where the app stopped being able to be deployed to test devices, it was faster to create a new Visual Studio project and copy over the existing code and assets than try and find the issue in the original project. This lead to the publisher GUIDs being different
between the new and original projects.
Now when I try and submit the updated package within the Windows Phone Online dashboard I get the following error message "The publisher in the uploaded package does not match the expected publisher. The expected publisher
for this app is: "CN=0745C81D-D1ED-49ED-A219-C546B5F31DE5"".
I have updated both the WMAppManifest and Package.appxmanifest so that they have the following attributes and information:
Package.appxmanifest (PhonePublisherId="0745C81D-D1ED-49ED-A219-C546B5F31DE5")
And
WMAppManifest (PublisherID="{0745C81D-D1ED-49ED-A219-C546B5F31DE5})
I have then recompiled the app and uploaded and attempted to resubmit the update but I still get the error that the Publisher does not match. What have I missed??

This sounds tricky... perhaps you can do a search in the entire app for the GUIDs and replace them.
Also, you could build the appx package, rename the .appx to .zip, and open it up to see if you can find the wrong publisher id anywhere and it might give you a clue to where to make the change.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Server failed to start: The domain path does not match the running server

Hi,
I've configured Eclipse to run my local weblogic - which actually is working fine.
The server starts as intended and reaches state RUNNING.
As soon as this happens, OEPE tries to validate the server and compares the identified server's configuration to the expected configuration.
This finally results into the error message shown in the subject -- though server is still running.
!MESSAGE Server watcher[Oracle WebLogic Server 11gR1 PatchSet 1 at localhost]:The domain path does not match the running server.
Domain RootDirectory retrieved from the MBean of running server is: N:\Oracle\MIDDLE~1\USER_P~1\domains\MYWEBL~1\
Domain RootDirectory of this server: N:\Oracle\Middleware\user_projects\domains\myWeblogicServer
Obviously this seems to be an issue with the length of the directory and file names. The domain's configuration and all its start scripts do not have any 8+3 pathes, like USER_P~1 for user_projects. Nevertheless the MBean of the server returns such a "truncated" path which in turn is invalid for OEPE.
Fix: When setting up the domain in Eclipse, try using that 8+3 representation of the domain's location. Then the comparison will succeed...
My Question: Where do we need to ask for a fix in OEPE? The 8+3 path is still a valid one ...
Best Regards
Philipp

I haven't been able to reproduce this and 8+3 representation of the domain's location shouldn't be required.
Can you provide more information:
- is this a network drive?
- what is your OS: XP, Vista, Win7?
- what is the Windows file system type, is it FAT or NTFS
- Can you try install WLS on C:, e.g. C:\Oracle\Middleware\user_projects and see if it still happens?

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

The content type of the response message does not match the content type of the binding

I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
'<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
        <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
.7em;color:black;}          p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
}          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
It is not written using WCF ... any workarounds?!
Thank you.

Hi Raj Krish,
For ASP.NET related issue, please post to the following forum:
http://forums.asp.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AADSTS50011: The reply address does not match the reply addresses configured for the application

Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank Russo

Hi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

I have this exact same issue!
I was on 2.0.1 running fine until late last week, noticed emails would not show up unless I had opened them in outlook. I thought I ran into a bug so I upgraded to 2.0.2. Now I can sync my email if outlook had them opened previously, but no calendar or contacts at all. I don't think my exchange admins will move me to another server, any other ideas?
I love my iphone but if these features don't work I can't use it. I would appreciate any ideas.

"The installed product does not match the installation source" error

Each time I attempt to use the SL disk to update the Apple drivers in Windows XP SP3 on my MacBook Pro 13" I get the error message posted in the title. I used this same disk successfully to update my MacPro. Anyone know what this means?
"The installed product does not match the installation source. Until a matching osurce is provided or the installed product and source are synchronized, this action can not be performed."

I get the same error, and I have an idea of what's going on.
When I try to install Boot Camp 3, Windows asks me to locate "BootCamp.msi". If I try to uninstall Boot Camp via "Add/Remove Programs", the same prompt comes up.
What I think is happening is that the original installer for Boot Camp 2.0 is being requested. But I have applied the Boot Camp 2.1 update, which has no BootCamp.msi file associated with it.
So I'm at a road block of sorts, unable to install Boot Camp 3.0. I cannot download the original Boot Camp 2.0 installer from Apple, only the 2.1 update. (I recently moved across the country and didn't bring my 10.5 media.)
Any ideas out there on what can be done to get Boot Camp 3.0 installed?
Message was edited by: Human Being

Can somebody give me an appreciation of the crp8337 owc bluetooth keypad matching the Apple bluetooth keyboard?

Similar Messages

Maybe you are looking for