Can someone tell me what settings I need for ipad texting.  Went to Mexico and now can't get the texting to work at all on ipad.  Thanls

Can someone tell me what settings I need for ipad texting.  I went to Mexico and when I returned the texting does not work on my ipad.  The support at Apple wanted to charge me to get info.
THanks

Can't address the problem directly, cause even though my iPad4 is Cell+Wi-Fi, I've never put a SIM in it and never had the need to text, SMS or iMessage, from it. When away from the office or home wireless network, I tether it off the iPhone. Skype, both text and video, work just fine thru the Wi-Fi link, though.
HOWEVER, when I was hashing out the contract details to get the iPhone 5 about 14 months ago at Telcel, the representative distinctly mentioned that both Visual Voicemail as well as iMessages would be included in the package and they would be mandatory cause "I was getting a (subsidized) Apple iPhone" on a 24 month leash. Then when the gizmo came out of its box for SIM installation and activation, she went thru the motions of making sure both were working properly.  So I assume the carrier has some say in the matter.

Similar Messages

  • Can't get the software to work with Audigy 2

    Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
    I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
    I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
    DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
    This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
    Thanks in advance. dentore

    Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
    For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
    CAT I hope you fix your sound card. Good luck.

  • Can someone tell me what this effect is for FCPX

    Can someone tell me what this effect is for FCPX
    Im talking about the "after image" looking effect in the picture

    at first, I would suggest, under Effects/Tiling "Visual echo"
    (Apple added that effect in some update …)
    but on looking closer on your example, it asks for more finesse:
    the shadow arm is keyed over the original ...
    maybe some smart arrangement of layered, processed and delayed green-screening?
    (means, not shot in font of a black bg, to get a clean key of subject...) 
    … would be my shoestring-budget solution
    or, looks like masking, tracking, etc .. maybe tools like coremelt's SliceX could help you.

  • I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

    I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

    do u have your ipad doing airplay because that could happen

  • I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What  to do?

    I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What  to do?

    I am getting the same error message - error 7, Windows error 193 running iTunes on a PC Laptop (HP) which has been running iTunes previously for at least 2 years. 
    I followed the Apple support page and uninstalled (in order) all Apple programmes specified, rebooted, then re-installed.  Two additional errors crop up in re-installation, the first one is to do with Apple Mobile Support Device Services.  It seems that this might be rectified by plugging in said devices before finishing the re-install.  The second reads iTunesHelper was not installed correctly please re-install iTunes.  This persists. I cannot uninstall iTunesHelper using the Control Panel, but I can delete it using Windows.  However, after re-installing again, it still won't run and the original error comes back.  I've downloaded and uninstalled 15 times now and this is taking far too long to be acceptable. 

  • I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work

    I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work?

    In that case the procedure assuming it is a PAYG phone is to get an o2 PAYG sim, put £20 on it and then make a few calls making sure you leave £15 on the sim to pay for the unlock. Then there is an online unlock request form on the o2 site just fill this in. It takes between 1-14 days and you get a message from o2 telling you how to complete the official unlock through iTunes.
    I got my o2 unlock in nov 09 so this is not just opinion.

  • I can't get the volume to work when I use firefox. It does work on internet explorer. What is going on?

    I downloaded firefox in order to do some online training that I couldn't open in any other browser. I can't get the volume to work in this browser. I can use internet explorer and the volume works. But I can only do the training through firefox.

    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
    You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.<br />
    See also:
    * https://support.mozilla.org/kb/No+sound+in+Firefox
    * https://support.mozilla.org/kb/Video+or+audio+does+not+play

  • How can I get the Airport Express to handle all the PPPoE stuff?

    Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
    We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
    What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
    I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
    How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
    Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

    Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
    Direct ethernet cable connection to my Macbook works fine.
    When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
    But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
    thanks
    Paul

  • I can not get the debugger to work on oracle studio 12.3 - It will not attach

    I can not get the debugger to work on oracle studio 12.3 - It will not attach

    APN for Tmobile is epc.tmobile.com
    MMSC is http://216.155.174.84/servlets/mms
    Here are the instructions:
    Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
    Application manager --> Application catalogs --> New
    Catalog name: Extras-devel
    Web address: http://repository.maemo.org/extras-devel
    Distribution: fremantle
    Components: free non-free
    Refresh catalogue
    Install fAPN and fMMS
    Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
    Run fMMS and it will start with configuration
    Put APN name the same you named your MMS APN point during fAPN configuration
    Type MMSC which you can take from your operator
    Type your number starting with +
    Put max size of pics you want to have in outgoing MMS
    Save all and start sending MMS from fMMS menu.
    It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
    WHEN YOU GO TO MMS to set your configuraions, the information should look like this
    MMSC: http://216.155.174.84/servlets/mms
    Resize Image: 300
    Your Phone Number: +##########
    NOW U ARE DONE!! =)

  • I can't get the connect to work after base installion.

    Hello, everyone, I am new to Arch Linux.
    I follow the installation guide install Arch Linux, Everything run pretty smooth, except at the part when I need to choose the package, I am not so sure what I am doing. So I choose everything except for the thing that I am sure I would never need.
    When the installation is complete, I try to go to the next setup which update my system, but some how, I can't get the connection working, switch mean, I couldn't do anything beyond that. (both wireless and wired network, BTW I am using DSL and I do try the adsl thing)
    Every thing seem make sense to me during the installation, but I just can't get the network connection working.
    BTW: my laptop is a Toshiba portege M100.
    Any idea?
    Thanks
    Last edited by ioky (2008-06-25 06:18:58)

    Try typing in:
    dhcpcd eth0 (or whatever interface you are using)
    and hit enter, I had the same type of problem and this woke up my network connection.
    Edit: Also, once you gain your connection up and running, you might want to install ifplugd.  It is a daemon which will automatically configure your Ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled, which is good for laptops.  Once installed make sure you put it in /etc/rc.conf under the DAEMONS section.
    Here is some info in the wiki http://wiki.archlinux.org/index.php/Configuring_network
    Last edited by ArchGentoo (2008-06-26 01:22:45)

  • I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn ato downloads it defaults back to off, can anyone help?

    I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?

    Welcome to the Apple Community.
    Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions)

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • Hi there, I use a MacBook pro. I have had an one year Creative Cloud acount since february, and now I'm getting the message: WE ARE HAVING TROUBLE VERIFYING YOUR MEMBERSHHIP. I have a photoshop, lightroom and indesign membership. Help!! I need to work! Wh

    Hi there, I use a MacBook pro. I have had an one year Creative Cloud acount since february, and now I'm getting the message: WE ARE HAVING TROUBLE VERIFYING YOUR MEMBERSHHIP. I have a photoshop, lightroom and indesign membership. Help!! I need to work! What should I do? Thank you.

    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • HT4623 iPad 3 how can l gets the SIM card works With iPad 3

    As all we know its christmas time l just received the gift for iPad 3 &amp; l notice that it need SIM card for me to use as the phone &amp; data,how can l gets the SIM card works With iPad 3

    Remember am in South Africa &amp; we got few carrier nets am in MTN provide &amp; I c my sim looks so big to fit on my iPad

  • TS3274 How can I get the volume to work?

    We have an iPad but can't get the volume to work?

    Alright now if you are talking about issues using Safari, here a few things that you can try.
    1. Quit Safari completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Clear Safari. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Maybe you are looking for