Can't access certain things after upgrading to iOS 8.1.2 on iPad

Just upgraded my iPad to iOS 8.1.2 and now, cannot connect to the App Store, iTunes Store, do an iCloud back up, or even open up Facebook for an app. Password is correct. Surely it does not take 12+ hours to update? What gives? Thanks.

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

Similar Messages

I can't access my contacts after upgrading to IOS 5

During the syncronization it appers: The iTunes can't sync contacts in Iphone because contacts is being used by Iphone. Then shows me the legend "Close the contacts configuration in iPhone an sync again".
The problem is that contacts configuration is closed and I can't even open it in iPhone. Does anyone can help me?

Try to connect your iphone in computer, in itune restore the iphone as a new one. (it worked for me)
Or delete your contacts app from iphone and sync again.
Good luck
Geraldo Ramires

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

I can't update my apps after upgrade to iOS 6...?

I can't update my apps after upgrade to iOS 6

Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

Urgent! Phone can't make phone call after upgrading to ios 6

Hi guys,
I use my US factory unlocked iPhone 4s 32GB in China (Carrier is China Mobile). The phone can't make phone call (has no carrier service signal) after I upgraded its OS to ios 6. Does anybody know how to fix this problem?
The facetime also missing after upgrading to ios 6.0
Thanks in advance!

Whenever I see "factory unlocked" I get suspicious, because there is no such thing as "factory unlocked". If you purchased the phone directly from Apple and the receipt says "unlocked" then it is unlocked. If you did not purchase it directly from Apple it was hacked to unlock it by whoever you bought it from. The "factory" was the back room of the shop. Unless you bought it directly from Apple (or an Apple-supported cellular carier) your phone was hacked, and updating it undid the hack. If this is the case there is no solution that can be discussed in an Apple-hosted forum.
If you really did buy it unlocked directly from Apple then razmee's suggestion is the way to go.

Can't connect to 3g after upgrading to ios 8

I have an ipad and use Verizon for cellular data. After upgrading to IOS 8 I can't connect to 3g. The upper left hand corner of my ipad says "searching". I have reset my network settings, turned off and on the ipad, and have had no success. Any suggestions?

Hey Gary1177,
Thanks for the question. Based on what you stated, it seems like there is trouble with a cellular data connection. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Get help with the cellular data connection on your iPad (Wi-Fi + Cellular Model) - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

Can't access shared music after upgrading to 8.0.2.20

After upgrading iTunes to version 8 on my mac, the shared music no longer appears. Has anyone else had this problem?
The problem does not exist on iTunes for Windows 8.0.2.20 - I can still access shared music.

Press the leftmost button out of the three in the top right corner of the window just above View.
(39759)

TS3899 Can't access my email after restore and iOS upgrade

I restored my iPad -which wiped out my email accounts - and upgraded t latestt iOS
I re-entered my email account properties but now I can't receive or send email any longer. Error states it can't access the pop server.
I've checked account settings are same as iPhone and pc which are accessing email just fine
Help to troubleshoot / fix appreciated
Thx
Rob

The easiest thing to do is to restore from backup if you have one. The backup will continue the email settings. Do you have a recent backup?

Unable to use certain sites after upgrading to iOS 8.0.2

After upgrading (unintentionally) to iOS 8.0.2 I can no longer use certain sites that I regularly used previous to the upgrade. The bookmarked signon page comes up and is pre-populated with my userid and password. However the ipad does not respond when I touch the "logon" button on the screen. The screen is not responsive...almost seems frozen. This upgrade is useless to me if I cannot use these sites. Anyone else having these issues? Any solutions?

I do not have any issue in using Lync 2013 on my iPhone 6plus. Our corporate IT has solved the problem; I am not aware what all changes they had to do in the Lync server.

Can't connect to WIFI after upgrading to IOS 6

After upgrading to IOS6, my 4S stopped connecting any available wifi networks. It keep poping up "Unable to join the network "***" " when I tap any wifi spots I've been used so far. My problem is not like most people says. Instead of taking me the the apple website, mine doesn't even connected! This problem has been around for a week. I have to relay on 3G so far. I've tried resting the wifi setting, resting the iphone and even tried a lot of public wifi spots. It still doesn't work. Is it the problem of hardware? Help me, plz!

The solution lies in the router password encryption. There is the option WPA2 instead of current WPA/WPA2 on my router. I changed the setting to just WPA2 and it worked now. But the former option worked on iOS5.1.1. Thanks!
[Update]Turns out it is still unresolved. After the changing the encryption I restarted the router and it is still the luck I got before. The connection will not last long. Still unable to connect.

Can NOT access Service Registry after upgrading SOA Suite to 10.1.3.5

Hi all,
I have a SOA suite 10.1.3.1 installation with Oracle Service Registry 10.1.3.1 installed.
After I upgrade SOA suite to 10.1.3.5, the Oracle Service Registry can not be accessed.
When I access http://myServer:8888/uddi/bsc/web or https://myServer:4443/uddi/bsc/web
The error is:
javax.servlet.ServletException: java.lang.ClassNotFoundException
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:442)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at com.systinet.webfw.WebRawService.displayErrorPage(WebRawService.java:574)
     at com.systinet.webfw.WebRawService.process(WebRawService.java:363)
     at com.idoox.wasp.server.adaptor.RawAdaptorImpl.dispatch(RawAdaptorImpl.java:318)
     at com.idoox.wasp.server.AdaptorTemplate.doDispatch(AdaptorTemplate.java:356)
     at com.idoox.wasp.server.AdaptorTemplate.dispatch(AdaptorTemplate.java:328)
     at com.idoox.wasp.server.ServiceConnector.dispatch(ServiceConnector.java:393)
     at com.systinet.wasp.ServiceManagerImpl.dispatchRequest(ServiceManagerImpl.java:638)
     at com.systinet.wasp.ServiceManagerImpl.handleGetRequest(ServiceManagerImpl.java:1883)
     at com.systinet.wasp.ServiceManagerImpl.access$100(ServiceManagerImpl.java:131)
     at com.systinet.wasp.ServiceManagerImpl$DispatcherConnHandler.handleGet(ServiceManagerImpl.java:2598)
     at com.systinet.transport.servlet.server.Servlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
I tried reinstall Oracle Service Registry, same error.
Todd

Did you install the service registry in the same container as SOA suite, e.g. oc4j_soa.
It is typically best practice to install into separate container so upgrades don't affect other applications.
cheers
James

Time machine can not access time capsule after upgrade from snow leopard to mountain lion

Two days ago I upgraded my 2009 17" MBP from Snow Leopard to Mountain Lion. That evening my time capsule/time machine combination worked fine and did an incremental backup of about 12 gigabyte. Yesterday - only one day later - the time machine backup did not work anymore.
It appears that the system can not find the time capsule - even though it shows the remaining free space on the time capsule (so it did find it after all).
The message is always the same:
Time Machine can not complete the backup "Time Capsule"
The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
I also can not delete the backup image on the time capsule since it is read-only. And I do not want to format the time caspsule yet since my wife's MBAir is also using the same time casule.
I tried out all kinds of suggestions (hard and soft resetting both the MBP and the TC, entering the password again, setting the TC up again) all to no avail. No backup is possible anymore.

Mr. Zooot wrote:
Time Machine can not complete the backup "Time Capsule"
The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
I also can not delete the backup image on the time capsule since it is read-only.
Sounds like you got this message earlier:
If so, see #C13 in Time Machine - Troubleshooting.
Offhand, I don't recall anyone not being able to delete one via the Finder (but most were only backing-up one Mac, so just erased the disk).
You may have to wait for that message to appear again (24 hours later), or you might try holding Alt/Option with the TM icon in the menubar, and select Verify Backups if it will let you.

Can't access serial tty after upgrading to mavericks

Was programming arduino boards on Mac mini under mountain lion but since upgrading to mavericks no longer can see the serial tty ports. Can anyone help?

I am having a similar issue with the Arduino Leonardo board. I am running Mavericks and was connecting to the tty.usbmodem programatically just fine (I was using it with the previous os too; I'm guessing some sort of caching that still enabled it to work?).
At some point during my programming, the board had issues recieving data so I switched to a different (physical) usb port. After some debugging and rebooting, the tty.usbmodem is no longer listed as an option in the Arduino editor, nor is it listed in the terminal via ls /dev/cu.*; ls /dev/tty.*;
The post you linked to mentions updating the FTDI driver. Mavericks didn't let me install it because it was "from an unidentified developer".
This thread: http://stackoverflow.com/questions/19621554/dev-tty-serial-missing-in-macos-10-9 -mavericks seems related to this issue.
Related: http://forums.adafruit.com/viewtopic.php?f=47&t=45460
Any help would be greatly appreciated.
Thanks.

Can't access my Aperture after upgrading to Mavericks

I currently have Snow Leopard. Yesterday I updated to Mavericks but found I could not access Aperture. The message said Aperture 3 2 4 was not accessible. Having no idea how to solve the problem I restored Snow Leopard.
I then tried to update my Aperture but with no success. Each time a message came through that I needed to be on a newer version of OSX.
I'd be very grateful for any advice on how to update to Mavericks and keep my Aperture library.

I am having a similar issue with the Arduino Leonardo board. I am running Mavericks and was connecting to the tty.usbmodem programatically just fine (I was using it with the previous os too; I'm guessing some sort of caching that still enabled it to work?).
At some point during my programming, the board had issues recieving data so I switched to a different (physical) usb port. After some debugging and rebooting, the tty.usbmodem is no longer listed as an option in the Arduino editor, nor is it listed in the terminal via ls /dev/cu.*; ls /dev/tty.*;
The post you linked to mentions updating the FTDI driver. Mavericks didn't let me install it because it was "from an unidentified developer".
This thread: http://stackoverflow.com/questions/19621554/dev-tty-serial-missing-in-macos-10-9 -mavericks seems related to this issue.
Related: http://forums.adafruit.com/viewtopic.php?f=47&t=45460
Any help would be greatly appreciated.
Thanks.

HT4528 After upgrading to iOS 7, my iPhone and iPad can no longer connect to App Store. I did reset all settings, still the same. Please help

I just upgraded my iPhone 4 and iPad Mini to iOS 7, suddenly they both can no longer access to iTunes nor App Store. The message says "Cannot connect to App Store". After some research, I did reset all, and still the same. Can anyone have a clue? Thanks,

As I mentioned earlier, when I clicked on the App Store or iTunes Store, the message reads "Cannot connect to iTunes Store" or "Cannot connect to App Store" depending on which I clicked.
I did check iTunes & App Store, it used to show my Apple ID there, but somehow it shows empty there. I then manually typed in my Apple ID, it just won't work. I know for sure that my Apple ID works as I tried logging online using that ID fine, but my iPhone and iPA
Thanks,

Can't access certain things after upgrading to iOS 8.1.2 on iPad

Similar Messages

Maybe you are looking for