Can't access Solaris 10 after install Essbase 11.1.1.3 32/64-bit clients

We try to install Oracle Essbase 11.1.1.3 Client 11.1.1.3 32 and 64 bit in separated folders on Sun Solaris 10.
Installation performed by root.
1.
32-bit Essbase 11.1.1.3 Client was installed and cofigured in ../ESS11113_32 folder with Oracle installer without
problem.
2.
We tried to install the 64-bit Essbase 11.1.1.3 Client in separate ../ESS11113_64 folder by running command
# installTool.sh -console
3.
After that, we got the problem on Solaris 10 system after 64-bit Essbase 11.1.1.3 Client installation which didn't succeed.
We can't access the server with any user id (except root).
The following is from /var/adm/messages,
Error : Aug 21 14:53:46 renata telnetd[27562]: [ID 176939 daemon.error] libpkcs11: /usr/lib/security/pkcs11_kernel.so unexpected failure
in ELF signature verification. System may have been tampered with. See
cryptoadm(1M). Skipping this plug-in.Aug 21 14:53:47 renata telnetd[27562]: [ID
234283 daemon.error] libpkcs11: /usr/lib/security/pkcs11_softtoken.so
unexpected failure in ELF signature verification.
So, please tell us is there anyway to fix this issue asap?
Thanks,
Vic

Thanks john for your reply.
Below are my questions which are still not clear to me. We are using only SAN Pillar Storage for DB servers and Local Hard disks for all Application servers. So said this App Servers cant access SAN storage all they have is local hard disk for each app server.
1. For Essbase Server can i use SAN shared file system from pillar storage for ARBORPATH only for Active-Passive setup.
2. For Applications can i use the local hard disk space as shared between two systems for HA (Active-Active).

Similar Messages

  • Can't access web after install

    Installed on new SLES11 box. Livetime says it's running, but I can't access at http://<ip> or http://<ip>:8700.
    When I installed SLES, I used the defaults for server type (Print). Show I add/change to Web/LAMP?
    Or is it something else?
    thanks

    Lindsey,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • New AE: older laptop can't access net after install

    Hello all:
    Just replaced my old Airport Extreme (round version) with a new Airport Express. In the course of that I
    changed the security level to WPA2 Personal. My current (Intel, 10.6.7) laptop connects to the internet
    without a hitch. However, now my older Ti-Book (PowerPC) can't get online. Attempting to connect to the
    house network gets message: "There was a problem connecting to [network name]".
    Checking all the Airport settings doesn't reveal any problems, and the newer laptop can use it without a hitch.
    Is this an issue with the changed security level? Does it need to be set at the lower security level for the TiBook to use it?
    I'm reluctant to go backward on the security level, but it was handy to have a basic machine to use as the kitchen/household
    reference laptop. I'm hoping there's an easier fix...but the old boy might have to retire at last...

    Is this an issue with the changed security level? Does it need to be set at the lower security level for the TiBook to use it?
    Yes, the issue is the original 802.11b AirPort Card in the TiBook can only connect to secured wireless networks using the TKIP encryption protocol. This protocol is used with both the WEP and WPA security modes. WPA2 uses a stronger encryption protocol, AES/CCMP.
    Your other option would be to get a wireless USB adapter to take advantage of both the stronger encryption, but allow the far superior bandwidth that you new 802.11n AirPort Express can provide.

  • Having issues after installing Essbase V9.3.1,configuring the SQL interface

    I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
    When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
    Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
    .odbc.ini
    [ODBC Data Sources]
    DOLU003=IBM DB2 ODBC DRIVER
    [DOLU003]
    Driver=/home/db2inst1/sqllib/lib/libdb2.a
    Database=DOLU003
    [ODBC]
    Trace=0
    TraceFile=odbctrace.out
    InstallDir=/home/db2inst1/sqllib/odbclib
    [Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
    Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
    Received Command [SQLRetrieve] from user [Olapadm]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
    Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
    Connection String is generated
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
    Connection String is [DSN=DOLU003;UID=...;PWD=...]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
    SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
    = 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
    ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
    ODBC Layer Error: Native Error code [0]
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
    Failed to Establish Connection With SQL Database Server. See log for more information
    --------------------------------------------------------------------------------------------------------------------------------------------

    I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
    The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
    The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
    Once I opened the 32 bit driver interface directly and set it up the errors went away.

  • Can't Start Portal After Install

    After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the same message.
    What password should I use to start the server?

    I've followed the directions and am experiencing the exact same problem. Brand
    new installation of Weblogic server 6.1 SP2 with examples. That install is working.
    Then added Portal 4.0 SP1, updated the license file and I have the same issue
    with the Illegal access exception resulting in the "Fatal initialization exception"....
    Hmm!
    [email protected] (Bowrat) wrote:
    Below listed are the common errors you run into during installation
    process:
    - You need to have the correct version numbers of both the weblogic
    server and the portal server. For instance the portal server 4.0 (eval
    copy) will only run on WebLogic 6.1 SP1. So check the edocs for
    supported platforms
    - Make sure you have the installed the full version of the weblogic
    server (including examples)
    - Finally, you need to run the UpdateLicense.cmd file to update the
    license.bea under ur Bea Root
    Give it a shot after u have checked all of the above three - goodluck
    - Bowrat
    www.Bowstreet.com
    Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
    From: Steve Anderson <[email protected]>
    Newsgroups: weblogic.support.install
    Subject: Can't Start Portal After Install
    References:
    NNTP-Posting-Host: 209.11.114.150
    X-Original-NNTP-Posting-Host: 209.11.114.150
    Message-ID: <[email protected]>
    Date: 13 Feb 2002 20:25:53 -0800
    X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
    Organization: BEA SYSTEMS Inc
    Lines: 18
    XPident: firewall-user
    Path: newsgroups.bea.com!209.11.114.150
    Xref: newsgroups.bea.com weblogic.support.install:9600
    After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
    that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the samemessage.
    What password should I use to start the server?

  • Error 404--Not Found - After Installing Essbase 11.1.2.2

    Hi,
    I have experienced error.
    I have one box of EPM 11.1.2.2, using Windows 2008. After installing Foundation and configuring it, there's no problem at all. I can open workspace and interop as well.
    However I added Essbase, installing and configuring it. But after installing Essbase, I managed to turn on Hyperion Shared Service again, it didn't work.
    The error says:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    What I have done is reconfiguring Shared Service, Essbase also. But no luck at all.
    Does anybody have the clue, please advise. Thanks.

    Hi John,
    I got error like this on the log:
    <Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Jun 15, 2012 1:06:18 AM ICT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
    C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
    <Jun 15, 2012 1:06:19 AM ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
    <Jun 15, 2012 1:06:20 AM ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
    <Jun 15, 2012 1:06:22 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Jun 15, 2012 1:06:22 AM ICT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Jun 15, 2012 1:06:22 AM ICT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
    <Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
    <Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Jun 15, 2012 1:07:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    <Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    <Jun 15, 2012 1:07:45 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    <Jun 15, 2012 1:08:10 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:11 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    COMP ID = oracle.EPMOHPS
    Hyperion Provider Services - Release 11.1.2.2.100.2167
    Copyright (c) 1991, 2012 Oracle and / or its affiliates. All rights reserved.
    connection mode : HTTP
    essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
    java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
    <Jun 15, 2012 1:08:12 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
    javax.servlet.ServletException: Cannot initialize Provider Services server framework.
         at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'APS [Version=11.1.2.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
    javax.servlet.ServletException: Cannot initialize Provider Services server framework.
         at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: javax.servlet.ServletException: Cannot initialize Provider Services server framework.
         at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    Essbase® Administration Services - Version 11.1.2.2.100.2176
    Copyright © 1991, 2012 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
    US Patent Number 5,359,724
    US Patent Number 6,317,750
    Current time stamp: Fri Jun 15 01:08:14 ICT 2012
    Server started successfully
    Waiting for client requests
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:16 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    **********Getting connection from hub connection pool..Testing JNDI connection....
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
    javax.servlet.ServletException: DSF initalization error null
         at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SHAREDSERVICES [Version=11.1.2.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
    javax.servlet.ServletException: DSF initalization error null
         at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: javax.servlet.ServletException: DSF initalization error null
         at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "prefs" failed to preload on startup in Web application: "workspace".
    EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
         at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
         at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
         at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
         at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
         at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'WORKSPACE [Version=11.1.2.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "prefs" failed to preload on startup in Web application: "workspace".
    EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
         at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
         at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
         at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
         at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
         at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
         at com.hyperion.css.CSSSystem.initCSSSystem(CSSSystem.java:318)
         at com.hyperion.css.CSSSystem.getInstance(CSSSystem.java:272)
         at com.oracle.workspace.Repository$PrefsStore.initialize(Repository.java:2917)
         at com.hyperion.bpm.prefs.PrefsServlet.init

  • Can not access BIOS after update BIOS

    Can not access BIOS after update X220 BIOS to version 1.19
    Type: 4290-R32
    BIOS: 1.19
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
    Ask google and try anyway but not work
    - Press ThinkVantage, Press F1, Press Fn+F1
    - Power off, unplug AC, unplug battery, wait 15 miniute, try all again
    - Try to update BIOS again

    That is really weird.
    When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?

    Hello people,
    I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?
    Thanks
    <Email Edited By Host>

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
    1. Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    2. In the Finder, press command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
    Other...
    A sheet will drop down. In that sheet, select
    Raw Query
    as the criterion, then click OK or press return.
    Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
    4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
    Quit and relaunch the App Store. Test.
    If you find these instructions confusing, ask for an alternative method.

  • Can't start Tomcat after installing Bea WorkShop for JSP

    Hi,
    I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.

    I installed BEA Workshop for JSP Version: 3.1.0
    Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
    Thanks for your assistance.
    Ron

  • Why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp, why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp

    why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp

    why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp

  • I just purchased Adobe Lightroom 5 and can't activate it after installing it on my computer because the product box doesn't contain a 24 digit S/N serial number but an 8 digit PN number. Does anyone have a solution?

    I just purchased Adobe Lightroom 5 and can't activate it after installing it on my computer because the product box doesn't contain a 24 digit S/N serial number but an 8 digit PNB number. I contacted the vendor and they told me to seek help via the Adobe help lines. Does anyone have a solution?

    Unfortunately, the "find your serial number quickly" link does not work because I don't have any number on my Lightroom cdrom box with 24 digits... All I have is an 8 digit PN number... :-/

  • Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

    Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

    Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

  • Can not open itunes after installing latest version update 11.2

    Can not open itunes after installing latest version update 11.2

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Hi, I can't send email after installed maverick with mail

    hi, I can't send email after installed maverick with mail
    Thanks

    OS X Mail: Troubleshooting sending and receiving email messages

  • Cannot access iphoto after installing Yosemite

    cannot access iphoto after installing Yosemite
    My icon for iPhoto has a X thru it when I try to re install through app store nothing happens

    what version of Iphoto are you running there is an update available ver9.6

Maybe you are looking for

  • Switching iPod from Mac to PC

    I have a 60 GB video iPod that I originally formatted using my iMac G5 in December last year. My wife uses it primarily, and she has a Sony Vaio laptop running Windows XP. She has been relying on me to update her iPod but now wants to do it herself s

  • Looping through files in a folder, How to

    Looking for plsql code to read through files in a folder, and pass the name of the file found to a parm. The parm will then be used to open the table, process data to end of file, and then close the file. The file is then moved to an archive, and the

  • Replicate ME52N create attachment and attachment list in Web dynpro

    Dear Experts, Please can someone provide sample code and 'How to' steps to replicate ME52N create attachment and attachment list in Web dynpro? I've looked at FILEUPLOAD and FILEDOWNLOAD in Web dynpro and this seems suitable for only 1 file attachmen

  • How to quit ping in Terminal.app?

    Morning. I've forgotten to set the -c4 in ping. How can I stop now the ping command in the Terminal.app? TIA and kind regards, Friedrich

  • KEYNOTE DIFFERENCES BETWEEN A CATALYST LAN SWITCH & A STORAGE SWITCH (MDS)

    Hi Guys, I had a very simple query. I had a very basic query. I wanted to know the difference between a switch which we connect to our campus netorks and switches connected to storage area networks. I dont mean the cost and stuff, but more into how t