Can't access the folder I created.

Hi All,
I created a folder using this code
File tempFile=new File("D:\\Destination");         
          boolean ansOne = tempFile.mkdir();
           System.out.println(ansOne); I works fine. Create the "destination" folder and print "true". And I try to copy a text file from separate folder to this folder , at run time it gives error messge like
*(Access is denied)in the specified directory.*
Can any one tell me a how to copy a data from one folder to another folder . Thanks in Advance.

Please show us how you are trying to copy the file.

Similar Messages

  • Can't access the web-site in my home folder from the internet.  Need help.

    I am trying to publish a website from the Sites folder in my home directory. The website is made and I can access it from from every computer within my ethernet. But despite a couple attempts I made I can not get the website published on the internet.
    I have an Airport Express station. Two Macs and one PC are using the ethernet. As far as I can tell the Airport Express station is directly connected to the internet. I live in a brand new apartment which has Lan outlets in every room next to the electricity outlets. I have a single designated internet IP address.
    To open my computer to the internet I set the "Default Host Option" in the Airport Administrator Utility and selected the default three digits for the "Default Host option" IP address. Then I updated the Airport Express station, manually set the IP address in the Network preferences on my Mac to the "Default Host option" IP address and activated Personal Web Sharing in the Sharing preferences. By doing so I lost my internet connection. It turned out I still had the same IP address that I had before I selected Default Host Option.
    As I understand with the Default Host Option I designate one IP address within the ethernet to receive all traffic from outside. But how do you now tell the Airport Express station which computer on the ethernet will be the host for the incoming traffic carrying the Default Host Option IP address? Apparently just setting the IP address manually in the clients computer Network preferences to the "Default Host Option" IP address doesn't tell the Airport Express station to change the IP address it has assigned to this client to the Default Host Option IP address.
    In another attempt to make my website accessible on the internet I removed the Default Host Option and instead opened Public Port 80 and Private Port 80 for the IP address of the client computer in the Port Mapping tap of the Airport Administrator Utility. But again, no access to my website from the internet.
    To access the website from within the ethernet I use the following web-link, which works fine:
    http://192.xxx.x.x/~user/index.html
    The internet of course doesn't see the 193 IP address. It only sees the Public IP address. Therefore I used the Public address instead of the Private IP address to connect to my website from the internet:
    http://222.xxx.xxx.xxx/~user/index.html
    But as I said, I still can't access the website from the internet.
    I have the feeling that I conceptually don't understand something correctly. I would appreciate if somebody could help me with this problem.

    See this article:
    http://support.apple.com/kb/HT1866
    Sometimes My Music does not show up in special folders in TweakUI.
    If so, see this post:
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188##
    If you would rather not mess with the registry you can often work round with a shift key start.
    Hold down the shift key and start iTunes, keep holding down the shift key until you are asked to choose or create a library. If you already have one, navigate to your iTunes folder and choose iTunes Library.itl. Otherwise create a new library in My music.

  • "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    this just started w/ me yesterday.  I was running 10.5.3, and nothing changed - the message just appeard out of nowhere.  I update to the latest iTunes 10.6 but the message is the same.
    Sounds like probably some sort of Library file corruption.
    The two options available in the message box are "Download" and "Quit".  Download is useless because I'm already running the latest.  Quit is pretty useless.
    I was going to just create a new Library and re-import all my music.  Of course, all my iPhone sync settings are going go have to be recreated.

  • After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents.  Any ideas?

    after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents."  Any ideas?

    Are you restoring from a TM backup??
    Check the methods Pondini outlines to do restore.
    Q14-17
    http://pondini.org/TM/FAQ.html

  • I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, the cut the recording into songs using one audio file folder. When working on an individual song, I can't access the sampler.  I get the message "nothing to display"

    I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler.  I get the message "nothing to display" or "no region or audio file selected"  After much research on the web, I believe this is a permanent bug.  Does anyone have a good work-around for this type of work.  We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler.  Thanks in advance for your ideas!  Cheers.

    Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track.  I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project.  Thanks again.

  • HT1918 Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e

    Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

    I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

    Hi rgarden95,
    Can you please confirm the exact version of Muse you are opening the file with?
    To check the version of Muse, please click on help->About Adobe Muse CC.
    Regards,
    Akshay

  • HT201317 I created a folder in my photostream on my iphone but I can not see the folder on my iPad 1.  My wife does see the folder on her iPad 3.  Is there anything I can do for my older iPad?

    I created a folder in my photostream on my iphone but I can not see the folder on my iPad 1.  My wife does see the folder on her iPad 3.  Is there anything I can do for my older iPad?

    If you created an album containing some of your photo stream photos, this will not be shared using photo stream.  If you want to share a subset of your photos, create a shared photo stream and share it with your wife, as explained here: http://help.apple.com/icloud/#mmc0cd7e99.

  • Can't access the Create or Share Menus, using Window 7

    Using Windows 7, I can't access the Create or Share menus, please help

    Hi,
    Did they ever work and have just behaving like this or is this a new install?
    Does the user that you are running under have administrator rights?
    Sounds like it was a bad install, have you tried uninstalling/re-installing?
    Brian

  • Can not access the media card files Blackberry 8310 - HELP

    Can not access the media card files Blackberry 8310.
     I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
     Here are the messages:
     “A media card has been inserted that contains encrypted content which will be unaccessible by this device”
     I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
     Media card support – ON
    Encryption Mode: - Security Password & Device
    Encrypt Media Files – YES
    Mass Storage Mode Support – OFF
     Please note – I can not change the encryption mode since it is set by policy
     Security Options – General Settings – Content Protection – Disabled
     The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
     Unable to display file /media card/ pictures/ing000000xx.jpg.rem
     Here is what I have tried (from the advice on this board):
     1)     Read the files directly off the media card – No good
    2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
    3)     Email the file then read it – No good
    4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
    5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
     So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
     All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
     Thanks for any help you can offer!

    Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • I was given an older ipod as a gift and want to load the songs into my computer, but it says that I can not access the sync feature.  I registered for an Apple ID and when I tried it won't let me register.

    When I was given the iPod it had a GREAT load of songs already on it. (That was part of the whole "gift" thing.)  I want to sync it and create playlists in my own library and copy the songs to my computer's library too.  I applied for an Apple ID, and find that this is so old that eventhough it was NEVER registered it is listed under a weird username and won't let me register as the new owner to access the music and sync.  What do I do?  It is an older version (I'm assuming) with 80G and only 25 have been used.  I can't access the music already loaded and don't want to lose the mp3 files I have in my existing library now too. 
    Any help is greatly appreciated.

    Not sure if this helps:-
    The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered  owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work.  Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple  Store and explain that they were gifted to you and ask how you can use them.  The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

  • How can I access a folder on my iMac?

    Hi All,
    I have an iMac (late 2010) and a new MB Air (late 2011).  I have a document folder on my iMac that I would like to either a) be able to remotely access and manipulate from my Air, preferably not by just sharing screens or b) sync the folder onto my MB Air.  Within my local home network, it's not an issue, I can use AirDrop, but when I take my Air on the road, it'd be nice to access the folder of frequently edited documents.
    Bonus Points:
    I also have a first edition iPad running iAnnotate - is there a way to sync the edited documents from iAnnotate to both my iMac folder and MB Air without having to plug my iPad into iTunes and "Save To-ing" then dragging and dropping over AirDrop?
    Basically, I have 3 devices which need to share and sync a folder of documents that I variously edit on any of the 3 devices, but would like to have updated access to from any device.
    Thoughts? and Thanks!

    This is only my opinion, but I think the absolutely easiest, fastest, most trouble-free, and least-expensive way to do this is to use Dropbox:
    http://www.dropbox.com
    There are apps for Macs, PCs, and iOS devices.
    Install the Dropbox on all your devices.
    Using your best Mac, put this important "document folder" inside the Dropbox folder that will be created for you in the Finder.
    Your Dropbox will automatically copy anything inside it to every other device. Any changes you make on any device will be reflected on all your devices.
    The first 2gb of storage are free. You can get more free storage by jumping through some hoops, or you can purchase more through a premium Dropbox account. 2gb is enough for almost everyone.
    Because of iOS's sandboxed app environment, not every app can make use of Dropbox (this is not a problem for Macs and PCs - if an app reads and writes files in any "normal" way, it can use the files synced by Dropbox). I'm not familiar with iAnnotate specifically, but many iOS apps have Dropbox sync built in. If this app doesn't, you might want to contact the developer to add Dropbox support.

  • How can we access the file/directory system in the server

    Hi friends,
    I have made a text editor attached with an audio player for my project.
    Both text editor and audio player are implemented in applet and put in to a
    jsp page using jsp:plugin. Text editor and player are separate applets running
    in the same page and from same server.A client who is using this editor may
    want to save the edited text files to the server as well as hear audio files from
    directories in the server.
    My question is how can we access the file/directory system in the server
    like we do in the local machine.When the user cliks save or openfromserver button
    in the editor, folder/files in the server must be displayed as we do with FileChooser.
    I am using Apache Tomcat 5,wiindows 2000 server, jdk1.5.
    manu

    You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

  • TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    Hi sar23,
    You may have inadvertently created or edited the document in the new Numbers 3.0 (which is free; you don't have to buy it) and are now trying to open it with the old Numbers 2.3.
    Both versions can be on your Mac at the same time, and can run at the same time.  The icons are similar so it's easy to confuse them (old on top here, new on bottom).
    The new Numbers 3.0 is in your Applications folder. The old Numbers 2.3 should be in a subfolder in the Applications folder named iWork '09 or similar.
    If you accidently edited an old document in the new version and want to take to take it back to the old version, you can export it:
    SG

Maybe you are looking for

  • I'm going to be getting a new Macbook Pro soon.  How to I sync my iPod Touch between both my old PC and my new Macbook Pro?

    I Currently Have a Dell laptop with iTunes 10.5 installed.  I have an iPod Touch with IOS 5.0.1 and I'm getting a new Macbook Pro in a couple of days.  Is there and easy way to transfer my music to my new Macbook?  Also, I would like to be able to co

  • Calendar crashes when importing

    When attempting to import an ICS file, Calendar crashes.  I was unable to import with no issues, not sure what happened.  Here are the Problem Details and System Config... Process:         Calendar [30342] Path:            /Applications/Calendar.app/

  • Open with in Elements 12

    I used to be able to right click on a photo and select open with/Elements 11 but in Elements 12 it will not open photo. Any hints on how to do this. I am not a fan with organizer and I would like to select a raw file and right click on the photo and

  • Interview questions..kindly contribute..useful for all of us

    Hi All I have started this new topic , inspire by a similare topic in forms 6i forum. Iam starting this new topic , for the benefit of all of us either they are beginers, or intermediate level or senior developers. I will be posting one question on t

  • Google fonts not displaying correctly since updating to Firefox 31.0

    Since updating to Firefox 31.0, the vast majority of Google / web fonts are not displaying correctly, including icons that are being replaced with random characters. When I view the Google web fonts page, only a few display correctly, the rest just d