Can't autofill new row when categorizing by column content.

Hello. I'm working on my personal finances spreadsheet and I want to categorize my entries by date, so that they'll be divided by months and years. I did that, no problems so far. The thing is, when I add a new row (at the bottom, below a row in the middle) it's blank, without formulas and configurations set on inspector for the previous rows (e.g. drop down menus and cell format). When I don't use categories, it works as it's supposed to, autofilling with dropdown menus, formulas, cell format etc. Any clue how can I use categories and still autofill new rows? Thanks beforehand =)

If all of your rows are independent (all formulas in a row refer only to other cells in that row), another thing you might be able to do is
1) Add a new row by dragging down on the handle
2) Select one of your existing rows (click on the row number to select the whole row) and copy it
3) Paste it into the new row.
You can do this for any of your data rows, not just the last row from the last category. However, if you choose to paste in a row other than the last one, your new row will immediately jump to its proper place in the categories.

Similar Messages

Add new rows when query not input-ready

In the Web Application Designer, is it possible to detect whether a query is in display or change mode, and depending on the outcome to set an Analysis Item parameter ? This would provide a solution to the following:
Background: I have a Web template used for sales quantity planning which contains two Analysis Items, each with their own input-ready query: ANALYSIS_ITEM_EXISTING allows users to enter plan values based on existing characteristic combinations, ANALYSIS_ITEM_NEW_ROWS allows users to enter new characteristic combinations and their plan values (using the 'Number of New Lines' parameter). These two separate Analysis Items are needed so that I can restrict the characteristic values differently for each. ANALYSIS_ITEM_NEW_ROWS shows only new rows, since I have set both parameters 'Number of New Lines' and 'Data Row to' to 5.
Problem: If the query underlying ANALYSIS_ITEM_NEW_ROWS is not able to go into change mode (such as when there is an active data slice, or a locking conflict), then instead of seeing 5 empty rows the user sees existing data from the underlying query. This looks bad and is confusing for the user.
Can anyone think of a solution?

Hi Jacky,
The Bex analyzer works in the same way as in the web. You've restrict all charateristics which are not in your rows or columns to a single value. Then you can see that in excel the last blank row has a black border. If this is the case you can add a new row.
By pressing F4 in an empty cell you can select values or if you've know the key you can type it directly. Also you can add multiple rows at once. IP collects all rows below the query.
If this not works, just put all chars from your aggr. level in the rows and check if this works. And then for each change to the restriction/layout run the query and look if you can still add new rows.
Hope it helps.
Regards,
J.

How can I add new row/column into existing jTable?

Hi add!
Can you help me how can I add new row/column into existing jTable?
Tnx in adv!

e.g
Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
their handlers are:
add new row:
//i supose u already have
DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
//and
   JTabel jtable = new JTable(tablemodel);
// Handler (row)
jbtAddRow.addActionListener(new ActionListener(){
   public void actionPerformed(ActionEvent e) {
      if(jtable.getSelectedRow() >= 0 )
          tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());
       else
            tablemodel.addRow(new java.util.Vector());
    });to add new columns its the same but inside actionPerformed method:
ask for e.g "Whats the name for the new column"
then,
   tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
Message was edited by:
Java__Estudante

Show a new row when an event is triggered

Hi
I have a requirement where in i have to create a new row when clicked on a add row button.
In order to complete the requirement i have created a rowLayout region in the page and in the Controller i am adding the childs to the region in the PR.
Childs are geting inserted in the same row..But i am not able to add child in the next row...
Any body having any clue...then plz help...
This is urgent...any help will be appreciated...

Hi guys,
I tried to create row dynamically by having a rowLayout region in the page and then creating the childs and adding to the rowLayout region.
Below is the code:
OARowLayoutBean rowLayoutBean = (OARowLayoutBean)webBean.findChildRecursive("rowLayout");
OARowLayoutBean bean1 = (OARowLayoutBean)this.createWebBean(pageContext,OARowLayoutBean.ROW_LAYOUT_BEAN,null,"rowLayout2");
String TextBox = "TextBox";
for(int i=0;i<4;i++){
TextBox = TextBox + String.valueOf(i);
OAMessageTextInputBean bean = (OAMessageTextInputBean)this.createWebBean( pageContext,OAMessageTextInputBean.MESSAGE_TEXT_INPUT_BEAN,null,TextBox );
bean.setPrompt(TextBox);
bean1.addIndexedChild(bean);
rowLayoutBean.addIndexedChild(bean1);
I am able to do so from processRequest but when i am tring to handle the button or partial event in the ProcessFormRequest then i am getting an error.
Below is the error details:
Error
(This developer mode error is thrown instead of being registered due to the lack of the page context object.) The OA passivation framework coding standard has been violated. Web bean properties cannot be modified in the controller processFormData or processFormRequest method. Web bean properties should be modified in the processRequest method only. An attempt to modify a web bean has been made in the following call stack: java.lang.Throwable at oracle.apps.fnd.framework.OACommonUtils.getCallStack(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.addIndexedChild(Unknown Source) at oracle.apps.fnd.framework.webui.beans.layout.OARowLayoutBean.addIndexedChild(Unknown Source) at Koelisupplier.oracle.apps.po.poprint.webui.TestCreateRowCO.processFormRequest(TestCreateRowCO.java:93) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source) at OA.jspService(_OA.java:71) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)

I can't insert new row in database when there is a secondary key.

hi experts. I am using Jdeveloper since a while. I would like to know If there is a way to insert a new row with secondary key attribute in database. As example if we have a sessionEJBLocal data control can't we add new row by using single selection choice item for secondary key attributes? I tried to use single selection even jdbc with sql queries in a managed bean but nothing. Can you help me please?

would this solve your problem
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html

Problem creating a new row when using tabbed regions

I am new to JHeadstart and ADF and have been using the evaluation version of JHeadstart (in JDev 11.1.1.3) to judge its efficacy for a new significantly-sized application. As part of that evaluation I have created a small application (you can do this with HR schema using say the Departments table) with a single entity and VO. On JHeadstart I have then placed some of the fields into multiple Item regions within a Tabbed region on the same page and below the Group (layout style Table, Table Overflow Style below With Splitter). Existing rows display fine and I can view the data on the separate tabs.
However, if I try to create a row, I can fill in the data on the main region, but if I fill in data on the first tabbed region I cannot switch to the next tab without an error being generated.
e.g. using Departments - fill in DepartmentId and DepartmentName on main region, fill in ManagerId on first tabbed region and try to switch to second tabbed region to fill in LocationId:
Missing mandatory attributes for a row with key null of type HRModule.DepartmentsView1
Attribute DepartmentId in HRModule.DepartmentsView1 is required.
Attribute DepartmentName in HRModule.DepartmentsView1 is required.
If you save, then you can navigate.
You can also demonstrate something similar (different error message but probably the same root cause) on the myJHSTutorial demo. If you navigate to an employee off the regions page and try and create a new employee (using the '+' button below the 'Employees' label), then the tabs are not refreshed and any attempt to change the tabs results in an error
Failed to validate a row with key oracle.jbo.Key[999 ] in HRModule.EmployeesView3
Attribute Salary in HRModule.EmployeesView3 is required.
Salary must be between 6000 and 12000 for this job.
The JHS devguide does not help. Any thoughts? I can send the HR sample if you wish.

OK, I was able to reproduce this. The problem is that when you switch tabs, a partial page request is send to the server which does not include the items filled in the table row itself, hence these items are not updated in the underlying view object row.
Solution is to have a partial trigger at the table or group level listening to tab events. We will add that to the next release, but you can also apply the fix yourself by adding the following lines to the stackedRegionContainer.vm template:
#if (${JHS.current.pageComponent.tableLayout} && !(${JHS.current.pageComponent.hasOverflowInline}))
## when creating a new row in a table, and using overflow right/below, when switching overflow tabs
## the items filled in the table itself must also be processed as part of JSF model update phase, to
## prevent required item error when clicking another tab in overflow area
## we can enforce this by making the whole group listen to tab events
#ADD_CUR_GROUP_PARTIAL_TRIGGER("#REGION_ID()Tabs")
#end
Add these lines just before the line starting with
<af:${elemName}
Steven Davelaar,
JHeadstart team.

Can't insert new row in last position in row set

I am trying to programmatically insert a new row into the last slot of a View Object's default row set.
I normally can do this:
Row newRow = vo.createRow();
// set stuff on the row
vo.last();
vo.next();
vo.insert(newRow);and, voila, the row is in the last position.
But on this particualr view object, when I do the above, the row is inserted in the first slot.
There doesn't seem to be anything unusual about the View object. it is a child Vo in the data model, but that shouldn't matter.
When I debug with vo.getCurrentRowSlot(), even after performing last(); next();, vo.getCurrentRowSlot() returns 0, never 3.
Has anyone else run into this behavior and if so, any resolution or explanation?
FYI, I was able to use the following workaround:
Row lastRow = vo.last();
if (lastRow != null){
    int indx = vo.getRangeIndexOf(lastRow) + 1;
    vo.insertRowAtRangeIndex(indx, newRow);
} else {
   vo.insertRow(newRow);
}

would this solve your problem
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html

JSP can't see new row without manual browser reload

I use two JSP files in a JDev 3.1 "application."
In the first JSP, I first use a RowSetBrowser to display the contents of the table EMP. I next use the setFormAction of an EditForm in this first JSP to "jump" to the second JSP file. In the second JSP, I insert a new row into EMP. Still in the second JSP, I then use <jsp:forward page="first.jsp" /> to return to the first page. But, upon returning to the first JSP, the new row cannot be seen in the resulting HTML page until I reload the page manually.
What can I do programmatically to have the first JSP page show the new row the second time the first JSP produces a HTML?

Thanks for these tips.
Could you go to the next step and provide snippets of code to flesh out these two approaches?
1. How does one write the header in the 1st page?
2. How does one create the a_unique_timestamp in this situation?
Thanks for any further help that you can provide!
null

Can not sync new songs, when I transferred info from computers took identity of old computer and now I have 2 identities on 1 computer

I can not sync new songs on new computer. When I transferred info from the old computer to the new one it also took the identity from the old computer
so it says I can not do anything because I currently have 2 identities.

If you have successfully transferred your iTunes library from your old computer to your new one, then go ahead and restore the Nano to factory settings in iTunes on your new PC. This process will deassociate the iPod with the computer and allow it to start syncing with the new one.
Restoring iPod to factory settings
B-rock

How can I add new values only to a column of a spreadsheet?

I have three "while loops" that are executed in parallel, two generate values and the third while loop write the values in a spreadsheet.
The run time of each while loop is different, to synchronize the three while loops I use a "Wait Until Next ms Multiple", but sometimes the same value is kept twice.
I think that a solution would be to add a "Write To Spreadsheet File" in the blocks that generate values, adding a new value in the wished column in each cycle, but I do not know like doing this.
I could keep the values in two arrays and add them in a same spreadsheet in different rows or columns, but I need save values in spreadsheet in each loop and not all values at the end of cycle.
Thanks.
German Garrigos.

I think your three loops solution is probably better than putting different kinds of functions into one loop. Keeping data acquisition/generation separate from file i/o is usually better because the OS can interfere with timing on the file operations.
If you pass the data to the file loop via queues, place the data into shift registers, and only write to the file when you have equal amounts of data from each generator you should be able to keep things synchronized. You can write larger or smaller amounts as necessary to keep pace with the generators. If one of the generators gets way ahead of the other, you have to decide how to deal with that issue.
Writing to the second column of a three column spreadsheet can be tricky. It involves keeping pointers to the portions written and not written, reading the entire file into memory and overwriting the cells where new data goes and rewriting the entire file. This can get very slow for large files. If the file and data structures are simple enough it might be feasible to read only a portion of the file and overwrite it with new data, but that approach has lots of risks to the data.
Wait until next ms multiple is only reliable if the wait interval is sufficiently longer than the execution time (including random OS delays) of each loop. Look at the synchronization functions such as notifiers to synchronize your loops.
If you still have problems, post a simplified version of your program and someone will probably be able to suggest solutions.
Lynn

HT2534 How can I open new iTunes account and split my content

I have account on iTunes I start with my email for my daughter when we got her a new iPod know I have a iPad for myself using same account want to get new one for her and let have her music off my account

You can create a new account (e.g. via this page), but you can't currently copy or transfer content from one account to another - so anything that was bought or downloaded via your account will remain tied to your account

Can't edit "New Event" when creating new event

When I try to create a New Event, I can't change the name of it from New Event. So now all my newer calendar entries are called "New Event."
How do I fix this?

I have exactly the same problem
Now I have to edit the name of the events direct on MobileMe on line and wait for sync to have it on my computer. Unbelievable!!
By the way, all my calendars have migrated to On-Line Calendars mode but, it seems like on these mode it is not possible to create Calendar Groups so all of them are together now. Unbelievable again!!
I'm wondering if this Ical issue could be related to font issues.
I'm also experiencing some kind of font problems since upgrade to snow leopard.
I had some font conflict issues during system installation.
On first installation I have optioned for deleting conflict fonts.
Then my menus were just erased.
Then, on the second installation, I have optioned to just accept the conflicts.
Now I have the menus back but other issues have been created.
Now the window requesting user and password comes only with the empty boxes but no text at all.
It's still working but just because I already know what to type in the boxes.
Message was edited by: Alec Fasani

Ebook is frozen, can only view new pages when fullscreening

So I bought a study guide and I can access all the pages but the problem is that I can't scroll, when i scroll down or up I can see the page number moving but on the screen the same page remains, the only way I change the display page is if I switch between fullscreen and not fullscreen. Can anyone help me please?
Thanks

There are lots of bugs in ADE2.0 (and 2.0.1).
One of them is that page scrolling sometimes does not work for people.
Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.

Can't find new drive when looking for start up disk

I upgraded to a new SATA HD on my G5. The process that I took was to copy the replaced drive via Super Duper. I moved the copy to my internal back up drive and then swapped out the old drive for a new drive. When I booted up, I did so from the back up drive and had no issues. I then partitioned the new drive and moved the files from the back up drive to the new drive. I then went into prefs to change the start up disk to the new drive - however, it is not showing up. The drive does show up in system profiler and I can navigate through it. However, nothing it is not picked up in start up??? Any thoughts?
Thanks in advance

Hi Turner100-
If you did not clone the drive onto the new one, then you must install OSX on that drive in order to have it boot the Mac.
Luck-
-DP

How can I sync new songs when 6th generation ipod says syncing is complete but new songs added on itunes are not synced to ipod

my new 6th generation synced fine the first time I added my cd's to itunes. Thereafter, I added additional cd's which are on itunes but the message I receive is syncing is complete but they do not appear on my ipod. Only the original cd's are still on the ipod Any suggestions are appreciated.

Just adding albums to iTunes does not mean they will be added automatically to your iPod. You can set it up that way, but it sounds like you do not.
Under the music tab for the ipod, you can select what music, albums, artists and playlists can be sync'd to your ipod.
i

Can't autofill new row when categorizing by column content.

Similar Messages

Maybe you are looking for