Can't connect to external Oracle DB with JDBC connector

Hello guys,
I had failed to connect to connect external Oracle  via JDBC connector .
Could you please help me to resolve the problem ?
Backgroud:
We need to connect the external Oracle DB with JDBC connector, because BI need to connect to the target Oracle. If the JDBC connector suceed, BI will create a UD which use the datasource
we create in Visual admin to connect to the external Oracle DB.
Environment:
Our EP version is NW04S SP17 , OS is AIX .
The target Oracle DB version is 10g(10.1.0.2.0, 64bi).
Configuration procedure :
1. Import Oracle driver "ojdbc14.jar" and create new driver which named "Oracle "  under
JDBC Connector ->Run time ->Driver  in Visual Admin.
2. Create datasource "Mydatasource" under JDBC Connector ->Run time ->Data Source,
Name : Mydatasource
Driver Name : Oracle
JDBC version: 2.0(with XA support)
JDBC compliant:
Object Factory :oracle.jdbc.pool.OracleDataSourceFactory
DataSource Type: ConnectionPoolDataSource
*CPDS class name :oracle.jdbc.pool.OracleConnectionPoolDataSource
Additional:
Additional Properties:
DatabaseName:LPAR8TEST
DriverName:oracle.jdbc.OracleDriver
Password: *****
PortNumber:1521
ServerName: 10.1.16.208
URL :jdbc:oracel:[email protected]:1521:LPAR8TEST
User:IMPL
Connectoin Pool:
Initial Connectons: 1                                         Expiration:  (check)
Maximum Connections: 25                                  Connection Lifetime :600
Maximum time wait of connection : 60                  Cleanup Thread : 200
Default Connectoin Isolaton :Default
SQL Engine:
Open SQL
3.Create Connector :
   Copy the standard connector :SDK_JDBC to SDK_JDBC_Oracle,
  Resource Adopter:
  Loader References:
  Add "libray:Oracle" .
Managed Connection Factory:
Configuration Property:
DriverName:oracle.jdbc.OracleDriver
Password: ****
User:IMPL
URL: jdbc:oracle:[email protected]:1521:LPAR8TEST
All fo my configuration had been listed.
And I had created JCO RFC : JT-BIDEV_PORTAL_BD1 , and created RFC connection with SM59 in BI.
Please give me some suggesiton.
Thanks.
Louis

When I try to start datasoure "Mydatasource" , it display error, error detail:
java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: Error during start of application "sap.com/Mydatasource". [id = StartupError]
     at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:608)
Caused by: java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "CGNPC".
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "Mydatasource".
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
          u2026.
When I try to test JDBC with URL : http://jt-pldev:50000/TestJDBC_Web/TestJDBCPage.jsp,
First I choose connection name "SDK_JDBC_Oracle" .
If I click "Check Connectons", it display :
500   Internal Server Error
SAP J2EE Engine/7.00
  Application error occurred during request processing.
  Details:
  java.lang.NoClassDefFoundError: com.sap.ip.bi.sdk.dac.connector.odbo.impl.Connection (initialization failure)
Exception id: [001A64A86F2C006B000004C40010302A000469C74E86A096]
If I click "Slecton Connection", it display:
500   Internal Server Error
SAP J2EE Engine/7.00
  Application error occurred during request processing.
  Details:
  com.sap.engine.frame.core.load.SAPNoClassDefFoundError: javax.resource.Referenceable
Exception id: [001A64A86F2C0063000004C00010302A000469C74FA2BB59]

Similar Messages

  • Can I connect an external hard drive, with a FireWire connector to AirPort Extreme?

    I am considering getting AirPort Extreme. I need to be able to connect an external hard drive with a firewire connection. Can it be done?

    Sorry, but no.

  • Connecting to an oracle db with jdbc

    I downloaded the jdbc drivers and unzipped them to "C:\SDK\Classes", therefore they're "C:\SDK\Classes\oracle\jdbc\..."
    My classpath is set to "C:\SDK\Classes\"
    public void connect()
            String serverName = "********";
            String portNumber = "1521";
            String sid = "oracle9";
            String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
            String username = "*****";
            String password = "*****";
           Connection connection = null;
         try
                String driverName = "oracle.jdbc.driver.OracleDriver";
                Class.forName(driverName);
         // Create a connection to the database
         connection = DriverManager.getConnection(url, username, password);
         catch (ClassNotFoundException e)
            System.out.println("Could not find the database driver");
             catch (SQLException e)
                System.out.println("Could not connect to the database");
    }I get the error "Could not find the database driver" when i run this.
    Can anyone suggest anything?
    Thanks!

    Check your classpath and webserver library directory
    it must be classes12.jar file in the lib directory that using the webserver
    or classpath
    .;c:\jdk1.3.1\extlib\classes12.jar;
    and check your jdbc driver version

  • Loss 3D graphics and can't connect to external display with NVIDIA card

    I note this morning that the graphics in 3D mode of iWork (version 4.1 with system 10.6.8) no longer appears in all software suite. The 2D graphics are displayed perfectly. I also notice I can't connect an external display when I am on NVIDIA card but work well with Intel card.
    The 3D graphics are printed but not displayed on the screen (it also appear inthe thumbnail). It seems to be a worry to display.
    I posted two screen images showing the problem of 3D in Pages.
    Link :
    http://www.flickr.com/photos/94407289@N00/6105793305/
    and
    http://www.flickr.com/photos/94407289@N00/6106332902/
    What's going on? and can someone help me because I have a report?

    Hello lolthisnameisnttaken,
    Based on your post it seems you're having an issue with an external display. The following article may help you find a solution:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

    can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?  in apple tv 3 and 2?
    That  i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive,  i dont want to see then  whit the streaming and icloud, or used my  laptop o pc for access de movies and stuff.
    i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
    if i can´t  connect a external hard  drive, wich others media players divices you know that can see itunes movies?
    ¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
    lo que no quiero es usar  la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
    y de no poderse conectar  que otros dispositivos media pleyer conoces para ver peliculas de itunes  en la tv?

    Welcome to the Apple Community.
    can i connect a external hard drive to apple tv 3 generation
    Unfortunately not.

  • Can i connect an external signal generator to the NI7344 to...

    Can i connect an external signal generator to the NI7344 to use its
    PID characteristics to precisely control the output
    I am using the flex motion board (NI7344) to control the force output
    of a linear motor. Using contouring and buffer operations i have
    successfully created a system which can output a controlled force
    which sinusoidal in form. I can achieve a reasonable output for
    waveforms of 10Hz, the use of higher frequencies is limited by the
    contouring operation ( a frequency of 10 Hz means i can only describe
    one period of a sine wave with 10 points ( 10ms between each point =
    10Hz). Can i therfore connect an external anologue wave generator to
    the NI7344 use and use its PID characteristics to output wave
    forms of
    higher frequency ??? .....could i output an anolgue wave form from an
    E-series DAQ via the RTSI cable to the NI7344 and control this ???.any
    ideas or advice would be much appreciated.

    Duncan,
    You can use a DAQ card to output an analog waveform, but it will be a software call not part of an onboard program. RTSI can be used to pass clocks and trigger signals, so if you want to route a clock signal to do the control you could.
    A. Talley

  • Can I connect an external DLT Tape drive to the SCSI connector on an E450

    Hi... totally new to SPARC. I have inherited an E450. It appears to have the 8 bay option. I have 6 scsi disk drives installed in slots 0 through 5. Internally, there is one ultra scsi controller in slot 2 and two internal cables running from the top of the card, one for each channel. I do have an extra ultra pci scsi card, but when I plugged it into a pci slot, the system would not boot. Bottom line, can I connect an external DLT drive to either Channel A or Channel B at the rear of the Unit and not intefere with other SCSI devices (i.e. the disk drives). Currently, the DLT is set to SCSI ID 8. If this isn't recommended, how do I install the secondary ultra scsi card and have the system recognize it ? Note that the Hard drives have been wiped and I WILL be loading Solaris 10, but have not yet. I wanted to make sure all of the hardware worked first. The second PCI Scsi controller I have is an Adaptec 39160, and I'm assumming it will work IF needed. I'd prefer not to use it if necessary.... ANY HELP is sincerely appreciated ! Thanks, Randy

    I suggest you leave the current internal connections just as they are.
    You never know when you'll need to add more disks.
    That Adaptec card is for PC's.
    It won't work in a Sun SPARC-based system.
    What sort of SCSI interface is required for that tape device?
    Single-Ended? High Voltage Differential? Low Voltage Differential?
    You need a card that matches that interface type if you hope it to "drive" the tape.
    One quick way to tell, is to examine the chassis of the tape peripheral
    and find the small icon that should be at the port for the SCSI cable.
    For example, Sun's 375-0005 card is Single-ended and is what you already have inside your E450.
    Sun's 375-0006 is a HVD card and would be correct for A1000 and D1000 arrays or L7 or L25 tape libraries.
    Sun's 375-3057 card is LVD and would be appropriate for Sun's D2 array.
    The manual for that 375-3057 card happens to have pictures of the SCSI icons I just mentioned.
    See page 35 in that manual.
    http://192.18.109.11/816-2156-11/816-2156-11.pdf
    Once you confirm what's needed by the tape peripheral, we may be able to suggest how to connect it properly.

  • How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?

    How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?  I have the latest Apple TV, ipads, iPhones as well as a solid HP Windows machine all on my home network.  Is there a way that I can connect my hard drive to my receiver or Apple TV directly so that the digital media is available on my network 24/7 rather than have it connected to my computer and available through Home Share which never works anyway??

    Sorry it's all done through iTunes.
    The following article(s) may help you with home sharing.
    Troubleshooting Home Sharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • Unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver

    I am unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver vers.2.573.4202.00 on a Win98 computer.
    First, I create a "Net Service Name" in order for the ODBC Driver to find the Oracle server. I then created a System DSN in the ODBC Data Source Administrator and assigned the "Net Server Name" as the server in the "Microsoft ODBC for Oracle Setup". But when I test this DSN with Oracle's provided "Oracle ODBC 32Bit Test vers.2.5.3.1.0" I get an error:
    SQLSTATE: NA000
    Native Error Code:0
    Driver Message:[Microsoft][ODBC driver for Oracle][Oracle]
    This error occurred on all three Win98 computers I have tried. It does however, seem to work fine on WinNT 4.0, and believe it or not, on the two Win95 computers I have tried.
    Does anyone have any fixes, recomendations, or advice?
    Thank you,
    Eric Edwards
    null

    Why are yu not using the Oracle ODBC driver - these can be downloaded from OTN.
    Have you set up a tnsnames.ora entry for the Oracle database you want to connect to? Does this name have a domain name added to it? Check %ORACLE_HOME%\network\admin\tnsnames.ora for the service name. If it is a name of the form :
    name.domain.subdomain
    then you should try using this full name when configuring the ODBC data source.
    null

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • Can not connect outside of Lan to with rtsp PVC2300

    I have the following cameras set up at my office
    1 - PVC2300
    2 - WVC54GC
    3 - AXIS 225FD
    I have a BEFSR81 Router
    I have a computer on Windows XP running the surv software to record.  Everything with that is good.
    I also have 2 desktops.
    I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
    1(a).  I can not connect outside of the LAN with RTSP with either the VLC player or quicktime.  It connects and asks for a password and then just hangs.
    The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router.  What am I missing?
    1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well,  so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
    2.  The voice with the PVC 2300  using http outside of the LAN (internet) lags quite baddly and is choppy.  This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem.  But it also happens when I connect to just the PVC2300.  I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy?  I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back.  I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either.  Suggestions?
    3.  This is more of a question.  I know the mobile streaming of the PVC 2300 does not include voice.  Is there an app or way that I can just get it to my Blackberry.  Even if I didnt get the video, voice is sometimes more important to me.
    I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
    Thank you in advace for your help.
    Colin

    Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
    Regarding RTSP access, are you also including the mobile.sdp in the URL?
    RTSP:///mobile.sdp   I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box.  That word may be what you have to include, so check that too...
    Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
    But your forwarded ports look right and should be opened.
    Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

  • Can't connect macbook pro to internet with airport extreme

    Can't connect macbook pro to internet with airport extreme

    If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
    Tell me how the Airport is setup.. what broadband modem and router you have.
    What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
    Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
    Upgrade to Yosemite??

  • How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    https://www.youtube.com/watch?v=72l_FLsXNAg
    I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
    also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

  • How can i connect asp to oracle db

    how can i connect asp to oracle db
    when i go to odbc to make dsn the message say " the oracle(tm) client and networking components were not found thes components are supplied by oracle corporation and are part of the oracle version7.3 or greater client software installation
    you will be unable to use this driver until thess components have been installed "
    where can i get oracle(tm) and how can what is all steps to make asp connect to oracle db
    thanks for you .

    Probably best to ask the Windows specific lists that best fits your problem:
    ODBC: http://forums.oracle.com/forums/forum.jsp?id=763957
    .NET Data Provider: http://forums.oracle.com/forums/forum.jsp?id=1015160
    Oracle Objects for OLE: http://forums.oracle.com/forums/forum.jsp?id=763961
    Oracle Objects for OLE and Wizards: http://forums.oracle.com/forums/forum.jsp?id=763961
    Mike.

Maybe you are looking for

  • DNS timeout and Name Server timeout between two DC's

    Hi All My clients have a brand new domain built for them, with two domain controllers at separate sites, and one site is having some issues. At one site (where DC2 is hosted), all users are having 5-10 minute log on delays - once in everything is run

  • Music from my iPod to my computer

    Within the past few months I have had to reformat my comp for various reasons. Whether it was time for another one or a virus breaching through my router. But I need to know if I can somehow transfer all of my songs and info back from my iPod back on

  • Trying to use "check for updates"

    why when do i click in "check for updates" the itunes said that i'm not connected to the internet or to tr again later .I' using the 6.0.2 , when i used the earlier one was fine. TKS DUDU

  • Serious Connection Problems

    Okay, I have posted this a couple of times and sort of got helped but its not enough, I really want to solve the problem because the solution only kind of helps. My problem is that my mac will not access certain websites. There appears to be no rhyme

  • Making Flash Player Default Program for .flv Files

    I'd like to use Adobe Flash Player as my default program to open .flv files.  How do I find the flash player executable file on my computer?  I have the latest flash player successfully installed on my computer (Win7, 64-bit, Firefox) but cannot loca