Can't control mouse on target computer
Hi all:
I have ARD 3.0 and can connect to my laptop from my desktop via Apple Airport Extreme. The desktop of the target computer comes on screen. When I click the arrow to take control of the computer, the mouse moves and then jumps back to the position the mouse is in on the target computer. Also if I click on anything, it has no action, just jumps back to the mouse position. Any ideas why or how to fix it?
Thanks,
Phil
I have exactly the same problem.
I can not control the mouse on my remote Mini from my G5. Controlling the mouse on my remote iMac G5 works fine.
Suggestions?
G5 2x2.5 Mac OS X (10.4.8)
Similar Messages
-
HT4352 can i control my apple tv from my macbook or only from my other devices and the apple remote.
Just got it and i can control it from everything else including my verizon and sony remotes.
Welcome to the Apple Community.
You can control the Apple TV with the supplied remote, the remote app from the app store on an iOS device and compatible programmable remotes, you can't control it from your computer (except for streaming content to it from iTunes) -
After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
I can't control my mouse in games [SOLVED]
Hi
I can't control my mouse in games like nexuiz, teeworld, sauerbraten, open arena... My mouse connected at usb and i have a laptop. I'm not using touchpad. Here's my xorg conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Mar 24 06:16:11 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "True"
Option "AutoAddDevices" "False"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LPL"
HorizSync 30.0 - 75.0
VertRefresh 60.0
ModeLine "800x600" 40.000 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "640x480" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "768x576" 34.960 768 792 872 976 576 577 580 597 -hsync +vsync
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
Option "NoLogo" "True"
Option "TripleBuffer" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1280x800_60 +0+0; 800x600 +0+0; 640x480 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
and my xorg.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH x86_64
Current Operating System: Linux dragonball 2.6.29-ARCH #1 SMP PREEMPT Fri Apr 17 14:14:28 CEST 2009 x86_64
Build Date: 15 April 2009 11:01:49AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 22 15:43:25 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x15c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI: (0@0:1:3) nVidia Corporation MCP67 Co-processor rev 162, Mem @ 0xd0600000/524288
(--) PCI:*(0@2:0:0) nVidia Corporation GeForce 8600M GS rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd2000000/33554432, I/O @ 0x00004000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.44 Tue Mar 24 06:11:47 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.44 Tue Mar 24 05:51:43 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x800_60 +0+0; 800x600 +0+0; 640x480 +0+0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.51.00.33
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:2:0:0:
(--) NVIDIA(0): LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x800_60+0+0"
(II) NVIDIA(0): "800x600+0+0"
(II) NVIDIA(0): "640x480+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "1280x800_60+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(**) AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event9"
(II) AlpsPS/2 ALPS GlidePoint: Found 5 mouse buttons
(II) AlpsPS/2 ALPS GlidePoint: Found x and y relative axes
(II) AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
(II) AlpsPS/2 ALPS GlidePoint: Found absolute touchpad
(II) AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
(**) AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
(**) AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event7"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device A4Tech PS/2+USB Mouse
(**) A4Tech PS/2+USB Mouse: always reports core events
(**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event10"
(II) A4Tech PS/2+USB Mouse: Found 8 mouse buttons
(II) A4Tech PS/2+USB Mouse: Found x and y relative axes
(II) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
(II) A4Tech PS/2+USB Mouse: Configuring as mouse
(**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
(**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
(**) A4Tech PS/2+USB Mouse: (accel) filter chain progression: 2.00
(**) A4Tech PS/2+USB Mouse: (accel) filter stage 0: 20.00 ms
(**) A4Tech PS/2+USB Mouse: (accel) set acceleration profile 0
(EE) A4Tech PS/2+USB Mouse: Read error: Resource temporarily unavailable
(EE) A4Tech PS/2+USB Mouse: Read error: Resource temporarily unavailable
I searched the forum and find a wiki page about x11 hotplug and i disabled it, not worked, added this;
Section "Module"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
EndSection
not worked too.
dmesg | grep -i mouse
input: Macintosh mouse button emulation as /devices/virtual/input/input0
mice: PS/2 mouse device common for all mice
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input10
generic-usb 0003:09DA:000E.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:04.0-1/input
Thanks, waiting your helps.
Eren
Last edited by eren (2009-04-28 15:27:33)new xorg log
[goku@dragonball ~]$ cat /var/log/Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH x86_64
Current Operating System: Linux dragonball 2.6.29-ARCH #1 SMP PREEMPT Fri Apr 17 14:14:28 CEST 2009 x86_64
Build Date: 15 April 2009 11:01:49AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 26 01:51:28 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x15c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI: (0@0:1:3) nVidia Corporation MCP67 Co-processor rev 162, Mem @ 0xd0600000/524288
(--) PCI:*(0@2:0:0) nVidia Corporation G86 [GeForce 8600M GS] rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd2000000/33554432, I/O @ 0x00004000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.44 Tue Mar 24 06:11:47 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.44 Tue Mar 24 05:51:43 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x800_60 +0+0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.51.00.33
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:2:0:0:
(--) NVIDIA(0): LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x800_60+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "1280x800_60+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(**) AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event9"
(II) AlpsPS/2 ALPS GlidePoint: Found 5 mouse buttons
(II) AlpsPS/2 ALPS GlidePoint: Found x and y relative axes
(II) AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
(II) AlpsPS/2 ALPS GlidePoint: Found absolute touchpad
(II) AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
(**) AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
(**) AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event8"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device A4Tech PS/2+USB Mouse
(**) A4Tech PS/2+USB Mouse: always reports core events
(**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event10"
(II) A4Tech PS/2+USB Mouse: Found 8 mouse buttons
(II) A4Tech PS/2+USB Mouse: Found x and y relative axes
(II) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
(II) A4Tech PS/2+USB Mouse: Configuring as mouse
(**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
(**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
(**) A4Tech PS/2+USB Mouse: (accel) filter chain progression: 2.00
(**) A4Tech PS/2+USB Mouse: (accel) filter stage 0: 20.00 ms
(**) A4Tech PS/2+USB Mouse: (accel) set acceleration profile 0
(EE) A4Tech PS/2+USB Mouse: Read error: Resource temporarily unavailable
(EE) A4Tech PS/2+USB Mouse: Read error: Resource temporarily unavailable
(EE) A4Tech PS/2+USB Mouse: Read error: Resource temporarily unavailable
and my xorg.conf
[goku@dragonball ~]$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Mar 24 06:16:11 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse3"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LPL"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
Option "NoLogo" "True"
Option "TripleBuffer" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1280x800_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
My head gonna explode Btw i wonder this problem comes with hwd may be I can't control it again damn! -
How can I control the zoom on my mac mouse?
How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.
If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions. -
I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.
I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. -
My mac seems to be frozen on an internet page. I can't force quit. I can't control+options+command+esc. I can't access my activity monitor. I CAN see my mouse moving but when I click on anything, it doesn't seem to engage or recognize it. Fix?
Thank you. There is a bigger issue. It is not the web page that is the problem. It is that I can see my mouse moving and can move it along the bottom toolbar and the options will highlight but I can't click on anything. I can see the apple icon to get to force quit but cant click on it.
I used your suggestion and force quit came up but I can't select the option to force quit... not even with my arrows and enter/return key. Any other thoughts?
Thank you. -
Can you control movement of regions without the mouse
can you control movement of regions without the mouse? I have trouble nudging the regions with the mouse and was hoping there was a keyboard solution.
Mezoaria wrote:
I have trouble nudging the regions with the mouse and was hoping there was a keyboard solution.
there is not.
perhaps it would help to turn off the Snap To Grid menuItem? -
I get black screen on my new macbook air but I can see the mouse pointer. usually need to restart the computer so everything works as it should
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
If that does not help, reinstall OS X -
Can't share screen to another computer but can control another - WHY??
I have a client I want to be able to control her computer when she needs me to through iChat screen sharing when necessary.
she is on a MacPro Quad-Core 10.5.7
she can control my screen but I cannot control hers!!! she accepts the screen sharing request, and on my end it just sits there forever but screen control never happens for me!
I tested a new user on her machine, and the same exact behavior occurred.
I tried plugging her into wired ethernet instead of her airport wireless connection...that still didn't work
she has a macbook pro on her home network running 10.5.7 which I can screen-control through ichat screen sharing with no problems whatsoever
but I cannot for the life of me figure out why no matter what I cannot control her macpro's screen through ichat
are there any preferences/files I should trash?
i am a good troubleshooter and this has left me completely stumped
thank you for any light you can shed on the problem!Ok,
Verizon.
Try getting her to set iChat menu > Preferences > Video/Audio section > Bandwidth Limit drop down to 500kbps.
What we have here is a Connection that is super fast.
as a consequence her iChat maybe be thinking you have not responded and end the chat just as it connects.
She probably has this device
http://portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WRv2/iCh at.htm
Ignore the settings for Port Forwarding as such. Use the page for the Access info only.
That firewall shown I think has High, Medium, Low and Off
Try it at Off as there are features within the other setting that could get in the way.
Also check the Advanced Filtering and Access Control.
Access Control should be about who can log on to the Modem to make changes.
The other should be about the sort of Web site she can visit but it may list other features as well.
A test Mac User account with the same iChat Details should be a fair test.
9:24 PM Thursday; July 2, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
I have a teenager that has learned how to delete his history, is there a way to lock the history to where I can monitor the sites he visits without setting up parental control program on the computer?
Use security software or a router with a build-in password protected logging feature if you want to keep a record of visited websites.<br />
You can't prevent people from deleting the history and other personal (private) data in Firefox and a log elsewhere will always work even if other browser would be used. -
HT1600 can I control my apple TV from computer
I misplaced my remote - can I control the apple tV from my iphone or computer
You can use the remote app to control via iPhone. Have you setup home-sharing?
http://itunes.apple.com/ca/app/remote/id284417350?mt=8 -
Image control mouse move event updates
I would like to drag the ROI around in the Image control (holding down the left mouse button) and continually read out the ROI coordinates. I can't find a way to do this: the mouse move event does not seem to fire if I hold the left mouse button down. I assumed that I would have
1. Mouse down when I click and hold.
2. Mouse move when I move the ROI around.
3. Mouse up when I release the left mouse button.
This does not seem to be the case.
I've done a simple workaround which is
1. Use the key up event to check that the space bar has been pressed.
2. Use this to toggle a "lock" boolean which locks the target to the mouse coordinates.
3. Use the mouse move event to return the Image Control Mouse Coordinates property.
4. Unlcok the target from the mouse coordinates by pressing the space bar again.
This kind of works, but it is much less intuitive than the standard windows "click and drag".
Any comments appreciated.
Thanks.
PS The Image Control is excellent, it has saved me lots of development time. Also, the ROI tools are hugely useful.If you filter the mouse down event (MOUSE DOWN?) then the coordinated are always returned on mouse move event weather the mouse is down or not. I did get the coordinates when the left button was down anyway it was just when the right button was down which the move event was not handled (due to the popup menu consuming the event first?) I thing there is a good way to do this with dynamic event registration, and NI has a similar example of drag and drop of controls, but I am not at my LV machine to look for it right now. If I am wrong I am sorry it is early and my coffee is not brewed yet.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA -
I am trying to run a labview executable on a target machine that only has the runtime version of labview installed. After installing all of the drivers that I could think of the program is still missing vis. However, after searching the source computer, I couldn't find the vis on that machine either.
The vis that it is missing include for example: DIO Port Config.vi, DIO Port Write.vi, AO Group Config.vi, AO *.vi, AI Control.vi, Counter Group Config. vi.
When the program stops complaining about missing all of these vis it tries to open with GUI but it only has the skeleton (none of the buttons, etc that are normally part of the GUI).
Again, I can't find any of these vis on the computer that has a full version of labview (and where the program works). So I don't know how to find them or what package they are apart of.
Any help/suggestions would be much appreciated.
I am not the developer of this program. I just have the executable which has worked on the two systems which have the same version of labview installed. I have Labview runtime 7.1 installed on the target computer.Hello megresearch,
All of the VI's you mentioned are part of the Traditional NI-DAQ driver. The most recent version of this driver is 7.4.1, but you can download any version you might need from the following page on our website:
Drivers and Updates: Multifunction DAQ
Try installing this driver on your deployment PC and see if your executable works then. Let us know if you are still having any trouble.
Best regards, -
WDK 8.1 Provisioning of target computer failure
I need help solving a test computer provisioning failure. I am trying to provision a Windows 8.1 (x64) target computer for WDK 8.1 driver testing using a Windows 7 (x64) host computer. Everything passes until the "Configure computer
settings (x64) (possible reboot)" step. The section of log file attached below shows an "Unknown error occurred:" after "Configure kernel debugging..." and "Configure test signing..." .
?xml version="1.0" encoding="UTF-16" ?
WTT-Logger
RTI ID="2294575628" Machine="MABRY0" ProcessName="C:\DriverTest\Run\te.exe" ProcessID="1900" ThreadID="3640" BaseTime="2015:1:29 19:12:54:964" Frequency="1998203" /
CTX ID="384048256" Current="WTTLOG" Parent="ROOT" /
Machine
Build="9600.00"
Platform="AMD64"
OS="Windows 8.1 Pro"
ServicePack=""
Version="6.3"
BuildLab="winblue_r3"
BuildDate="140827-1500"
Language="English (US) (REDMOND)"
Config="n/a" CA="2422874" LA="2423010"
rti id="2294575628" /
ctx id="384048256" /
/Machine
MetadataRef
Id="WexLogger"
Inherit="False"
AttributeName="Taef:Title"
AttributeValue="Test Authoring and Execution Framework v3.7k for x64" CA="2456257" LA="2456391"
rti id="2294575628" /
ctx id="384048256" /
/MetadataRef
RTI ID="4144358067" Machine="MABRY0" ProcessName="C:\DriverTest\Run\te.exe" ProcessID="1900" ThreadID="4936" BaseTime="2015:1:29 19:12:55:964" Frequency="1998203" /
CTX ID="2681058065" Current="DriverTestTasks::_ConfigureCommonSettings" Parent="WTTLOG" /
StartTest
Title="DriverTestTasks::_ConfigureCommonSettings"
TUID="" CA="2549161" LA="2549324"
Data
WexTraceInfo ThreadId="4936" ProcessId="1900" TimeStamp="93985572759"/
/Data rti id="4144358067" /
ctx id="2681058065" /
/StartTest
MetadataRef
Id="WexLogger"
Inherit="False"
AttributeName="Architecture"
AttributeValue="x64" CA="2575028" LA="2575125"
rti id="4144358067" /
ctx id="2681058065" /
/MetadataRef
MetadataRef
Id="WexLogger"
Inherit="False"
AttributeName="OriginalName"
AttributeValue="C:\DriverTest\Run\DriverTestTasks.dll" CA="2599587" LA="2599684"
rti id="4144358067" /
ctx id="2681058065" /
/MetadataRef
MetadataRef
Id="WexLogger"
Inherit="False"
AttributeName="TaefTestType"
AttributeValue="Native" CA="2626121" LA="2626221"
rti id="4144358067" /
ctx id="2681058065" /
/MetadataRef
MetadataRef
Id="WexLogger"
Inherit="False"
AttributeName="OriginalName"
AttributeValue="DriverTestTasks" CA="2652519" LA="2652646"
rti id="4144358067" /
ctx id="2681058065" /
/MetadataRef
MetadataRef
Id="WexLogger"
Inherit="False"
AttributeName="OriginalName"
AttributeValue="DriverTestTasks::_ConfigureCommonSettings" CA="2684909" LA="2685047"
rti id="4144358067" /
ctx id="2681058065" /
/MetadataRef
MetadataRef
Id="WexLogger"
Inherit="False"
AttributeName="RebootPossible"
AttributeValue="true" CA="2710373" LA="2710474"
rti id="4144358067" /
ctx id="2681058065" /
/MetadataRef
RTI ID="1911229277" Machine="MABRY0" ProcessName="C:\DriverTest\Run\te.exe" ProcessID="1900" ThreadID="3836" BaseTime="2015:1:29 19:12:56:214" Frequency="1998203" /
Msg
UserText="Configure kernel debugging..." CA="3035933" LA="3036090"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986073209"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Unknown error occurred: -1069350910" CA="3342998" LA="3343122"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986442763"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Failed to enable kernel debugging. Error: 32768." CA="3437768" LA="3437902"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986537544"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="" CA="3481908" LA="3482191"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986539132"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Configure test signing..." CA="3506742" LA="3506928"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986583604"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Unknown error occurred: -1069350910" CA="3787285" LA="3787417"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986887010"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Failed to enable test signing. Error: 32768." CA="3877649" LA="3877797"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986977439"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="" CA="3902410" LA="3902578"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93986978998"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Configure registry settings..." CA="3933167" LA="3933345"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93987004144"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Key: SYSTEM\CurrentControlSet\Control\CrashControl" CA="3965886" LA="3966065"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93987034959"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
Msg
UserText="Failed to configure the driver test computer" CA="5700051" LA="5700201"
Data
WexTraceInfo ThreadId="3652" ProcessId="4300" TimeStamp="93988791146"/
/Data rti id="1911229277" /
ctx id="2681058065" /
/Msg
EndTest
Title="DriverTestTasks::_ConfigureCommonSettings"
TUID=""
Result="Fail"
Repro="" CA="5731542" LA="5731698"
Data
WexTraceInfo ThreadId="4936" ProcessId="1900" TimeStamp="93988802236"/
/Data rti id="4144358067" /
ctx id="2681058065" /
/EndTest
PFRollup
Total="1"
Passed="0"
Failed="1"
Blocked="0"
Warned="0"
Skipped="0" CA="5773445" LA="5773613"
rti id="2294575628" /
ctx id="384048256" /
/PFRollup
/WTT-LoggerEthan, please run through this provisioning scenario with tracing enabled and send me the resulting .etl log file:
Close VS 2013
Start WDK tracing by running the following commands from an elevated command prompt:
IF NOT exist %temp%\WDK md %temp%\WDK
::Create text file containing WDK providers (all flags, all levels)
set TempWdkEtwProv=%Temp%\WDK\WdkEtwProviders.txt
echo {cc266499-ae72-483f-92eb-68fe819ad751} 0xff 0xff > %TempWdkEtwProv%
echo {dabf2b2d-0b18-4391-a6e6-c6030445b5de} 0xff 0xff >> %TempWdkEtwProv%
echo {be23ac82-fb9b-4dab-b532-bd02a1164ff2} 0xff 0xff >> %TempWdkEtwProv%
echo {061c5f03-df1c-45de-ac2a-c9c0f4dbbcc3} 0xff 0xff >> %TempWdkEtwProv%
::Create and start new trace session with the above WDK providers
logman create trace WdkConfigCompSession -o "%temp%\WDK\ConfigureComputerTrace.etl" -pf "%TempWdkEtwProv%"
logman start WdkConfigCompSession
Start VS 2013 and try to provision your target computer as before. This will take a little longer with detailed tracing enabled. Please let me know if it's unbearably slow and we can ratchet down the logging level and redo.
Once it gets to the point where it appears to hang, wait for a minute or two and then cancel out of the dialog
Close VS 2013
Stop WDK tracing by running the following commands from an elevated command prompt:
logman stop WdkConfigCompSession
logman delete WdkConfigCompSession
start %temp%\WDK
This should pop up File Explorer at the %temp%\WDK folder. Copy the ConfigureComputerTrace_######.etl file from there and upload it to my OneDrive Pro (send me your MS account info to
[email protected] and I'll send you a folder you can upload this to)
Thanks,
Steve
This posting is provided AS IS with no warranties, and confers no rights.
Maybe you are looking for
-
Music wont start on my iPhone 4S
Hello everyone, I've got a problem. It's very simpel. When i press the play button on my iPhone, it wont do anything.. Its an iPhone 4S on 5.0.1. I have tried several ways to delete my music on iTunes and 'rematch' it once again with the cloud, so to
-
How can I print half pages to fit in my circa desk calendar
How can I print half pages from iCal to fit in my Circa desk calendar?
-
How do I sync outlook contacts and calendar without deleting apps?
I have a second iPad. I wish to sync my Outlook contacts and calendar with my second iPad, however, upon doing so, I am prompted that I will be deleting the apps on the second iPad, which I suffered through yesterday (twice). Ideas on how to get ar
-
Hi all, We have actually installed some patch in R/3 system. so now we are testing BW3.5 system whether the full and delta loads are working or not. Full loads are not having any problem but few delta loads are having problems . what we did is - 1)
-
HT4623 can not update my iphone3g from4.1
i want to well need to update ios to 5.1 from 4.2.1