Can't convert SQL Server 7 procedures

When I create the Oracle Model, I get this error for every SQL Server 7 procedure that has parameters. I have a few procedures that don't have parameters, and they convert fine. Any help would be appreciated.
[SPCONV-ERR(1)]:[Parsing()],oracle.mtg.sqlserver7.parser.ParseException: Parse error at line 1, column 1.
Encountered: CREATE PROCEDURE
Example:
CREATE PROCEDURE just4.BS_AccountLoginSelect
@Username as varchar(20)
AS
BEGIN
SELECT LoginDate
FROM ab.just4.bs_usernamelogins
WHERE Username = @Username
ORDER BY LoginDate desc
END

Hi,
Try wrapping the parameter list in round brackets as shown below :
CREATE PROCEDURE just4.BS_AccountLoginSelect(
@Username as varchar(20) )
AS
BEGIN
SELECT LoginDate
FROM ab.just4.bs_usernamelogins
WHERE Username = @Username
ORDER BY LoginDate desc
END
Then, reparse the procedure.

Similar Messages

Converting SQL Server Stored Procedure to Oracle

Hi there,
I tried to use SwisSQL to convert my SQL Server stored procedure to Orcale without much success.
Is there anyone who could help me out with this?
My SQL Server Stored Procedure is:
CREATE PROCEDURE [dbo].[SP_BackgroundCheckRequest]
     --MASTER Table
     @MASTER_ID int,
     @PERSONNEL_ID int = NULL,
@DATE_OF_BIRTH datetime = NULL,
     @GENDER varchar(1) = NULL,
     @COUNTRY_OF_BIRTH varchar(3) = NULL,
@TOWN_OF_BIRTH varchar(100) = NULL,
     @STATE_OF_BIRTH varchar(50) = NULL,
     @CHECK_CATEGORY varchar(10) = NULL,
     @CHECK_TYPE varchar(10) = NULL,
     @PRIORITY varchar(10) = NULL,
     @PRIORITY_REASON varchar(100) = NULL,
     @SCREENING_LEVEL nchar(1) = NULL,
     @POSITION nchar(50) = NULL,
     @REQUEST_SOURCE varchar(60) = NULL,
     --NAME_TYPE Table
     @NAME_TYPE varchar(5) = NULL,
     @FAMILY_NAME varchar(50) = NULL,
     @FIRST_NAME varchar(50) = NULL,
     @MIDDLE_NAME varchar(50) = NULL,
     @TITLE varchar(10) = NULL,
     @PREFFERED_NAME varchar(40) = NULL,
     @PREVIOUS_NAME varchar(140) = NULL,
     --ADDRESS_TYPE Table
     @ADDRESS_TYPE varchar(10) = NULL,
     @ADDRESS_LINE_1 varchar(30) = NULL,
     @ADDRESS_LINE_2 varchar(30) = NULL,
     @ADDRESS_LINE_3 varchar(30) = NULL,
     @COUNTRY varchar(3) = NULL,
     @SUBURB varchar(50) = NULL,
     @STATE varchar(50) = NULL,
     @POSTCODE varchar(15) = NULL,
     @START_DATE varchar(10) = NULL,
     @END_DATE varchar(10) = NULL,
     --LICENSE_TYPE Table
     @LICENSE_TYPE varchar(5) = NULL,
     @LICENSE_AGENCY varchar(15) = NULL,
     @LICENSE_NUMBER varchar(100) = NULL,
     @LICENSE_SIGHTED varchar(1) = NULL,
     --PHONE_TYPE Table
     @TELEPHONE_TYPE varchar(5) = NULL,
     @TELEPHONE_NUMBER varchar(20) = NULL,
     @MOBILE_TYPE varchar(5) = NULL,
     @MOBILE_NUMBER varchar(20) = NULL,
     @EXTENSION_TYPE varchar(5) = NULL,
     @EXTENSION_NUMBER varchar(20) = NULL,
     --PASSPORT_TYPE Table
     @PASSPORT_TYPE varchar(5) = NULL,
     @PASSPORT_NUMBER varchar(50) = NULL,
     @PASSPORT_COUNTRY varchar(3) = NULL,
     @PASSPORT_SIGHTED varchar(1) = NULL
AS
BEGIN TRANSACTION
INSERT into MASTER (MASTER_ID, PERSONNEL_ID, DATE_OF_BIRTH, GENDER, COUNTRY_OF_BIRTH,
     TOWN_OF_BIRTH, STATE_OF_BIRTH, CHECK_CATEGORY, CHECK_TYPE, PRIORITY, PRIORITY_REASON,
     SCREENING_LEVEL, POSITION, REQUEST_SOURCE)
     VALUES (@MASTER_ID, @PERSONNEL_ID, @DATE_OF_BIRTH, @GENDER, @COUNTRY_OF_BIRTH,
     @TOWN_OF_BIRTH, @STATE_OF_BIRTH, @CHECK_CATEGORY, @CHECK_TYPE, @PRIORITY, @PRIORITY_REASON,
     @SCREENING_LEVEL, @POSITION, @REQUEST_SOURCE)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into MASTER table!', 16, 1)
     RETURN
END
INSERT into NAME_TYPE (MASTER_ID,NAME_TYPE,FAMILY_NAME,FIRST_NAME,MIDDLE_NAME,TITLE)
     VALUES (@MASTER_ID,@NAME_TYPE,@FAMILY_NAME,@FIRST_NAME,@MIDDLE_NAME,@TITLE)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into NAME_TYPE table!', 16, 1)
     RETURN
END
INSERT into ADDRESS_TYPE (MASTER_ID,TYPE,ADDRESS_LINE_1,ADDRESS_LINE_2,ADDRESS_LINE_3,
          COUNTRY,SUBURB,STATE,POSTCODE,START_DATE,END_DATE)
     VALUES (@MASTER_ID,@ADDRESS_TYPE,@ADDRESS_LINE_1,@ADDRESS_LINE_2,@ADDRESS_LINE_3,
          @COUNTRY,@SUBURB,@STATE,@POSTCODE,@START_DATE,@END_DATE)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into ADDRESS_TYPE table!', 16, 1)
     RETURN
END
INSERT into LICENSE_TYPE (MASTER_ID,TYPE,AGENCY,NUMBER,SIGHTED_YN)
     VALUES (@MASTER_ID,@LICENSE_TYPE,@LICENSE_AGENCY,@LICENSE_NUMBER,@LICENSE_SIGHTED)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into LICENSE_TYPE table!', 16, 1)
     RETURN
END
INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
     VALUES (@MASTER_ID,@TELEPHONE_TYPE,@TELEPHONE_NUMBER)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting Telephone number into PHONE_TYPE table!', 16, 1)
     RETURN
END
IF ((@MOBILE_TYPE <> NULL) AND (@MOBILE_NUMBER <> NULL))
BEGIN
     INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
          VALUES (@MASTER_ID,@MOBILE_TYPE,@MOBILE_NUMBER)
     IF @@ERROR <> 0
     BEGIN
          ROLLBACK
          RAISERROR ('Error inserting Mobile number into PHONE_TYPE table!', 16, 1)
          RETURN
     END
END
IF ((@EXTENSION_TYPE <> NULL) AND (@EXTENSION_NUMBER <> NULL))
BEGIN
     INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
          VALUES (@MASTER_ID,@EXTENSION_TYPE,@EXTENSION_NUMBER)
     IF @@ERROR <> 0
     BEGIN
          ROLLBACK
          RAISERROR ('Error inserting Extension number into PHONE_TYPE table!', 16, 1)
          RETURN
     END
END
INSERT into PASSPORT_TYPE (MASTER_ID,NUMBER,COUNTRY,SIGHTED_YN)
     VALUES (@MASTER_ID,@PASSPORT_NUMBER,@PASSPORT_COUNTRY,@PASSPORT_SIGHTED)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into PASSPORT_TYPE table!', 16, 1)
     RETURN
END
COMMIT

First, a basic concept. That also illustrates how different Oracle is (and PL/SQL) from SQL-Server (and T-SQL).
PL/SQL integrates two different languages. The PL language. The SQL language. It allows you to code SQL source code natively inside the PL language. The PL compiler is clever enough to do the rest - make calls to the SQL engine to create SQL cursors, bind PL variable values to bind variables in the SQL code. Etc.
PL is a "proper" programming language. It is much like Pascal (it is based on Ada, a close family member of Pascal). It is nothing at all like T-SQL.
Okay, now for the very basic rule for Oracle development.
Maximize SQL. This means using the SQL language to crunch data. It is the "closest" to the data. It is designed and optimised for dealing with data. Do your data processing using SQL.
Minimize PL/SQL. This means using the PL language not to crunch data, but to provide the conditional logic. Implement business rules. And then have the SQL language crunch the data as the data processing language.
Attempting to directly translate T-SQL code into PL/SQL is flawed. It is like trying to make coffee with teabags. Yeah, the tea may have caffeine it, but it is not coffee.
To do what that T-SQL script does, insert a row into a table, a typical PL/SQL equivalent will look as follows:
create or replace procedure InsertMaster( masterRow master%rowtype ) authid definer is
.. types and variables declared here
begin
-- masterRow is a record structure that matches the actual MASTER table
.. apply business rules and validation to the data.. raising user exceptions as needed
-- e.g. the POSITION column must be upper case
masterRow.position := upper(masterRow.position);
-- after the business logic and data validation we can add the row to the table
-- (PL will make the INSERT call to the SQL engine)
insert into master values masterRow;
end;No commit. The caller does the business transaction. It needs to decide when to commit to maintain the integrity of the data in the database. It may need to do several more calls, before committing.
With this approach, we can give the application schema (the caller) execute privs on this procedure. This procedure is defined with definer rights. This means it runs with the privs of owner of that procedure and MASTER table. It is trusted code. It does all the correct stuff to add a valid and checked row to the MASTER table. So we give the app schema execute privs on the procedure and no insert priv on the MASTER table.
The only way the caller can add row to the MASTER table is via this trusted procedure of ours.
And this is a typical approach in Oracle - using the PL/SQL (both PL language and SQL language) code to create an interface to a logical database in Oracle. Abstracting the complexities of SQL from the caller. Moving business and validation into PL. Allowing us the flexibility of modifying business and validation logic, without touching a single byte of caller/client code. Allowing us to manage and tune SQL performance without dealing with (badly designed and coded) SQL from a client - as the SQL resides in PL/SQL packages and procedures and functions.

How to convert SQL server stored procedures to Oracle 11g

Hi Experts,
In SQL server 30 stored procedures are there how to convert all the stored procedure
from SQL server to Oracle 11g.
Please help me,
Thanks.

ramya_162 wrote:
In SQL server 30 stored procedures are there how to convert all the stored procedure
from SQL server to Oracle 11g.
The single most fundamental concept you need to understand (grok in its fullness) is:
ORACLE IS NOT SQL-SERVER
There is very little, to NOTHING, in common between T-SQL (a language extension to SQL) and PL/SQL (integration of SQL with the language Ada, part of ALGOL family of languages that includes Pascal and C++).
So taking a T-SQL procedure and porting it as is to PL/SQL is plain stupid.
Why?
Oracle sucks at trying to be SQL-Server.
So how do you migrate from SQL-Server to Oracle?
By taking the REQUIREMENTS that the T-SQL procedures address, and addressing these requirements using Oracle SQL and PL/SQL.

How can I convert SQL Server 2008 Timestamp to DB2/iSeries Timestamp?

In DB2/iSeries I have a column that accepts Timestamp value. When I try to insert a timestamp value from the SQL 2008 table and into DB2/iSeries table I recieve the following error message:
OLE DB provider "IBMDA400" for linked server "XXX" returned message "SQL0180: Syntax of date, time, or timestamp value not valid.
Cause . . . . . : The string representation of a date, time, or timestamp value does not conform to the syntax for the specified or implied data type and format. *N is either the character string constant that is not valid or the column or host
variable that contained the string. If the name is *N, then the value is an expression specified in the statement. If the string was found in a host variable, the host variable number is 1. Recovery . . . : Ensure that the date, time, or
timestamp value conforms to the syntax for the data type it represents. Try the request again.".
Msg 7343, Level 16, State 2, Line 1
The OLE DB provider "IBMDA400" for linked server "XXX" could not INSERT INTO table "[IBMDA400]".
The SQL timestamp column contains the result in the following format:
2014-04-24 07:39:09.000
And my insert TSQL command is:
INSERT INTO OPENQUERY(XXX, 'Select "TimeOfDeal" from ABCD.TICKETS')
SELECT TimeOfDeal
FROM dbo.Tickets
WHERE DealId = 'ABC123'
I appreciate any help on this issue.

You are right it is a datetime data type in MS SQL, and a Timestamp in DB2.
I cast it to datetime2 and it worked.
Interesting. I would guess that somewhere under the covers, the date value gets converted to a string, and the different default string formats for datetime and datetime2 is illustrated with this statement:
SELECT convert(varchar, getdate()), convert(varchar, sysdatetime())
When I ran it, I got these values:
Feb 23 2015 12:31PM 2015-02-23 12:31:18.3708899
Now, why there is a conversion to string in the first place, I'm afraid I don't have any good answer to.
Erland Sommarskog, SQL Server MVP, [email protected]

How to convert sql server procedure in to plsql procedure

hi guys
i have requirement where in i have to convert sql server procedure into plsql procedure.
can some one help me out .
thanks,
Vamshi.D

Hi Vamshi,
As you want to convert sql server procedure in to plsql procedure
i.e SQL SERVER ->ORACLE Right
FYI
SQL SERVER Proc. Syntax are totally different as compared to ORACLE Proc.
So, better you study Logic of SQL-SERVER Proc and convert into
Oracle Procedure.
Thanks,
Samadhan

Can a SQL Server stored procedure call an SAP function module?

Can a SQL Server stored procedure call an SAP function module.? The stored procedure will be called via a trigger when data records are added to a Z table.

You have two options:
- the other software can use the RFC SDK and call directly in the system
- the other software can use a database connect
Markus

Error converting SQL Server DDL and views to Oracle

I am trying to convert SQL Serve 2008 on windows to Oracle 11g using SQL Developer 3.2.20.09. I am using the jtds-1.2.7 drivers to connect to SQL Server.
I have made several attempts to run the conversion and am getting the tables, indexes, and triggers converted with no issue. However, my Procedures and views are not coming across. All of them are giving similar errors as:
"Failed To Convert Stored Procedure get_compvision > esp3.dbo.get_compvision:unexpected end of subtree: Line 0 Column 0"
When I log into the source SQL Server environment using SQL Developer, I get an empty SQL Editor window with "null" when I try to {right-click -> "Open"} on the Procedure.
Logging into SQL Server Administrator as the same user I can see the source code, so the issue appears to be related to SQL Developer and not my user privleges. I am a dbo alias in SQL Server.
In addition, if I click on a view, I can see the data and metadata, but not the SQL that defines the view. I see tabs for column, data, triggers, and details.
In addition, if I go to the "capture" for my Migration project and drill down to procedures, I can see them listed, but each and every procedure gives me a "/* DDL not accesible */" error. I get teh same results for views, triggers and indexes.
Can someone help me? I have been googling for days!
Edited by: user4714217 on Jan 24, 2013 12:54 PM

SELECT v.vnd_c, CASE v.use_parent_addr_flg WHEN 0 THEN a.str_1 ELSE pa.str_1 END AS str_1,
CASE v.use_parent_addr_flg WHEN 0 THEN a.str_2 ELSE pa.str_2 END AS str_2,
CASE v.use_parent_addr_flg WHEN 0 THEN a.str_3 ELSE pa.str_3 END AS str_3,
CASE v.use_parent_addr_flg WHEN 0 THEN a.city ELSE pa.city END AS city,
CASE v.use_parent_addr_flg WHEN 0 THEN a.state ELSE pa.state END AS state,
CASE v.use_parent_addr_flg WHEN 0 THEN a.zipcode ELSE pa.zipcode END AS zipcode,
CAST((CASE v.use_parent_addr_flg WHEN 0 THEN (CASE a.foreign_flg WHEN 1 THEN 'Y' ELSE 'N' END)
ELSE (CASE pa.foreign_flg WHEN 1 THEN 'Y' ELSE 'N' END) END) AS char(1)) AS foreign_flg,
CASE v.use_parent_addr_flg WHEN 0 THEN a.country ELSE pa.country END AS country,
CASE v.use_parent_addr_flg WHEN 0 THEN a.cre_d ELSE pa.cre_d END AS cre_d,
CASE v.use_parent_addr_flg WHEN 0 THEN a.mod_d ELSE pa.mod_d END AS mod_d,
CASE v.use_parent_addr_flg WHEN 0 THEN a.mod_by ELSE pa.mod_by END AS mod_by
FROM dbo.om_vendor AS v LEFT OUTER JOIN
dbo.om_address AS a ON a.vnd_id = v.vnd_id AND a.addr_c = 1 INNER JOIN
dbo.om_owner AS o ON v.owr_id = o.owr_id INNER JOIN
dbo.om_address AS pa INNER JOIN
dbo.primary_vendors AS pv ON pa.vnd_id = pv.vnd_id ON o.part_id = pv.part_id
WHERE (pa.addr_c = 1)
WHICH TRANSLATES TO
SELECT v.vnd_c ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.str_1
ELSE pa.str_1
END str_1 ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.str_2
ELSE pa.str_2
END str_2 ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.str_3
ELSE pa.str_3
END str_3 ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.city
ELSE pa.city
END city ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.STATE
ELSE pa.STATE
END STATE ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.zipcode
ELSE pa.zipcode
END zipcode ,
(CASE v.use_parent_addr_flg
WHEN 0 THEN (CASE a.foreign_flg
WHEN 1 THEN 'Y'
ELSE 'N'
END)
ELSE (CASE pa.foreign_flg
WHEN 1 THEN 'Y'
ELSE 'N'
END)
END) foreign_flg ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.country
ELSE pa.country
END country ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.cre_d
ELSE pa.cre_d
END cre_d ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.mod_d
ELSE pa.mod_d
END mod_d ,
CASE v.use_parent_addr_flg
WHEN 0 THEN a.mod_by
ELSE pa.mod_by
END mod_by
FROM om_vendor v
LEFT JOIN om_address a
ON a.vnd_id = v.vnd_id
AND a.addr_c = 1
JOIN om_owner o
ON v.owr_id = o.owr_id
JOIN om_address pa
JOIN primary_vendors pv
ON pa.vnd_id = pv.vnd_id
ON o.part_id = pv.part_id
WHERE ( pa.addr_c = 1 );
Edited by: user4714217 on Jan 24, 2013 1:43 PM

Converting SQL server database into SAP readable XML??

Could anyone kindly let me know what is the procedure to convert SQL server database into SAP readable (encrypted) XML for SAP Authoring tool???

Sorry you will need to be more specific, what is it exactly you want to do? What authoring tool do you mean.
A bit more info and someone might be able to help you.
BRgds,
Simon

How to call a sql server stored procedure from oracle

Hi all,
Please anybody tell me how to call a sql server stored procedure from oracle.
I've made an hsodbc connection and i can do insert, update, fetch data in sql server from oracle. But calling SP gives error. when I tried an SP at oracle that has line like
"dbo"."CreateReceipt"@hsa
where CreateReceipt is the SP of sql server and hsa is the DSN, it gives the error that "dbo"."CreateReceipt" should be declared.
my database version is 10g
Please help me how can i call it... I need to pass some parameters too to the SP
thanking you

hi,
thank you for the response.
when i call the sp using DBMS_HS_PASSTHROUGH, without parameters it works successfully, but with parameters it gives the following error
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver]Invalid parameter number[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index (SQL State: S1093; SQL Code: 0)
my code is,
declare
c INTEGER;
nr INTEGER;
begin
c := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@hsa;
DBMS_HS_PASSTHROUGH.PARSE@hsa(c, 'Create_Receipt(?,?)');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,1,'abc');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,2,'xyz');
nr:=DBMS_HS_PASSTHROUGH.EXECUTE_NON_QUERY@hsa(c);
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@hsa(c);
end;
Create_Receipt is the sp which requires two parameters.
please give me a solution
thanking you
sreejith

Convert SQL server database into SAP readable (encrypted) XML for SAP tool?

Could anyone kindly let me know what is the procedure to convert SQL server database into SAP readable (encrypted) XML for SAP Authoring tool???

So If I understood it correctly there an existing propriertory question bank with SQL server. You are looking at an option to migrate all the tests and questions from the existing system to the LSO system. Right ?
I am still not clear on the xml conversion. Have you guys found a solution which could be achieved through a xml file ?
am not aware of a way through which you could import only a xml file and create tests/questions. If you have a sample xml file then forward me so that I could do some testing on my end.As per my knowledge you could do one of the following. I
1. Create the tests and questions manually in Authoring Environment. It will be a time consuming task. Based on the number of questions you have you might have to assemble a team of content developers to acheive this.
2. Alternatively, you could create a Adobe Flash based assessment. The Flash component would be the front-end and will read from a xml file to display the questions and to drive the funcationality. This would be a easier and less time consuming than creating the assessments manually in authoring environment. However, you might miss out some of the functionality available in the Test Author of Authoring Environment unless you have all the functionality replicated inside Flash. This would require one time effort in creating the Flash template and the xml file structure. Once that is created you could create multiple assessments by just replacing the xml file. If you select this approach then you would have to ensure the data from SQL is converted in the desired xml format required by your Flash component.
Please let me know if you require any further guidance or clarification regarding this.
Regards,
Ravi Sekhar

How to convert SQL Server hierarchical query (CTE) to Oracle?

How to convert SQL Server hierarchical query (CTE) to Oracle?
WITH cte (col1, col2) AS
SELECT col1, col2
FROM dbo.[tb1]
WHERE col1 = 12
UNION ALL
SELECT c.col1, c.col2
FROM dbo.[tb1] AS c INNER JOIN cte AS p ON c.col2 = p.col1
DELETE a
FROM dbo.[tb1] AS a INNER JOIN cte AS b
ON a.col1 = b.col1

See: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#i2129904
Ah, just spotted it's a delete statement - you won't be able to do it using subquery factoring in Oracle.
I had a go at trying to convert for you, but notice that you reference the cte from inside the cte... I can only assume you have a table called cte too...
DELETE FROM dbo.tb1
WHERE col1 = 12
OR col2 IN (SELECT col1 FROM cte)
Edited by: Boneist on 22-Jun-2009 09:19

SQL Server Stored Procedures

Is there a way of firing up SQL Server stroed procedures from
Flash 8?
If so could someone explain how to do it please, as I would
like to pass parameters from choices made via drop down lists
(populated from xml pages) to query a SQL Server 2000 database.
Any help appreciated.
Thanks

Yes, I understand. But Flash doesn't talk directly to your
SQL API.
The SQL interface is only available through ASP (in your
case, or any number of server-side technologies). That's why you
use getUrl() (or other http request) to send data to an ASP script
which then executes the SQL statement 'execute <blah>
<blah> <blah>'.
You then take the results of that SQL, format it, and return
something to Flash all as part of the one and only HTTP request.
Does this make sense?

How to run a SQL Server Stored Procedure

I need to run a SQL Server Stored Procedure in answer, the stored procedure use a hash table (temporary table) and I nedd to pass a parameter to stored procedure
anyone know if is it possible in OBIEE, if yes how.
thank you
max

thank you, but I'm not understand what you mean. I need to run this command in answer "direct access database"
exec storedprocedure 1,1,1
if I run this I receive thi error:
error : [nQSError: 16001] ODBC error state: S0002 code: 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server]object name '#TempList' not valid.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000).
here is the code of stored procedure:
ROC [dbo].[GetOrderListmax]
@OrderList varchar(500)
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #TempList
OrderID int
DECLARE @OrderID varchar(10), @Pos int
SET @OrderList = LTRIM(RTRIM(@OrderList))+ ','
SET @Pos = CHARINDEX(',', @OrderList, 1)
IF REPLACE(@OrderList, ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @OrderID = LTRIM(RTRIM(LEFT(@OrderList, @Pos - 1)))
IF @OrderID <> ''
BEGIN
INSERT INTO #TempList (OrderID) VALUES (CAST(@OrderID AS int)) --Use Appropriate conversion
END
SET @OrderList = RIGHT(@OrderList, LEN(@OrderList) - @Pos)
SET @Pos = CHARINDEX(',', @OrderList, 1)
END
END
SELECT o.OrderID, CustomerID, EmployeeID, OrderDate
FROM dbo.Orders AS o
JOIN
#TempList t
ON o.OrderID = t.OrderID
END

How to convert sql server database to SQL Server Express LocalDB??

How do I convert sql server database 2008 to SQL Server Express LocalDB??
Thanks
Aru

Hello,
Please read the following article:
http://msdn.microsoft.com/en-us/library/hh873188.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Can't find SQL Server 2012 Configuration Manager

In my Win8 I can't find SQL Server Configuration Manager.
I need to connect to an SQL Database using a specific port.
Does anyone know how to do that?
Thanks a lot!!

Hi Lina,
Did you install multiple SQL Server instances on your local server? We can not configure SQL Server 2012 instance under SQL Server 2008 R2 Configuration Manager.
If you had installed SQL Server Configuration Manager with SQL Server 2012, you can try to run "sqlservermanager11.msc". If this is not opening then you might not install SQL Server 2012 Configuration Manager.
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

Can't convert SQL Server 7 procedures

Similar Messages

Maybe you are looking for