Can't copy to the clipboard in applet

hi all,
doing an applet application now, i figure out that when i want to copy a string to the system clipboard (i use the popup menu), JAVA console prompt out error message AccessDenied or if other case, it will prompt NoClassFound .getWindow(Unknow Source)*, this is only happen in Firefox but not IE (and i need it to work on Firefox). but in the other hand, i have another applet application where i use the button to copy the string into the clipboard in Firefox, it has no problem except ask me to enabled the "signed.applets.codebase_principal_support" value to true, then it successfully copied to the cliboard but not the popup menu applet, why?
* this is when i didn't use java.awt.datatransfer.* but use JSObject
anyone has idea? thanks. it seem a bit messy, i'll explain more to you if there is something miss out, thanks again

Move off WEP to WPA or, preferably, to WPA2 (as recommended by Apple). WEP has been deprecated by the WiFi Alliance since 2004 as insecure (it can be cracked in seconds by any hacker).
Note that each device on a network has a unique IP address but if your address starts with 169 then you did not get a valid IP address assigned to you by your router. If restarting the router did not cure the problem then you should check for a firmware update for your router.

Similar Messages

  • After recording text using the dragon dictation app, it is converted, it can be copied to the iOS system clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

    after recording text using the Dragon dictation app, it can be copied to the iOS systme clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

    You need to do a long-press in any data entry field, then select Paste.

  • I cannot copy off the clipboard. I move the copy icon, get support.mozilla instead

    I can't paste from the clipboard. I move the paste icon to the toolbar and get support.mozilla instead. If I clip on this the paste function is not available

    I have my Time Capsule set up and can access it remotely, however, I cannot copy anything to the TC disk from my desktop. 
    Sorry but do you mean you cannot copy from local LAN to the TC, or from a remote location to the TC.
    What OS is on the computer.. it is a common issue with Mavericks.. where the networking giants have gone back to tin cans and string.
    I recommend a full reset of the TC to factory.
    Change all naming to SMB type.. it is so important now with Mavericks which is SMB by default.
    SMB uses names that are short.. <10characters is great.. keep it less than 20 max.
    No spaces.
    Pure alphanumeric.
    ie when apple setup suggests a name like
    Fred Blog's Airport Time Capsule.. it breaks every rule. It is over long.. has spaces and illegal character.
    So change all names.. eg TCgen4 (replace number with actual Gen if you like.. or just name it TC).
    Call wireless TCwifi (or TC24ghz and TC5ghz if you want separate naming for the bands).
    Then in finder.. use Go, Connect to server.
    Type in
    AFP://TCname  (where TCname is whatever you have now named your TC compliant with the rules above)
    If that fails
    AFP://TCname.local (Mavericks gets domain name issues.. it needs the domain and is local by default.)
    or
    AFP://TCIPaddress. eg AFP://10.0.1.1 which is router address by default.. only use if the ip is static.
    The computer will hopefully discover the resource and now you can type in your password.. public by default.. or whatever you changed it to.
    Now try copying files to the TC.

  • More DataFlavors copied to the clipboard/used in D&D in one step

    Hallo,
    For my GUI app. I would like to enable different types of information to copied to the clipboard.
    e.g. object type 1 - Document ID ( actual row's document ID from JTable ) - to copy document type
    object type 2 - string representation ( columns texts from JTable ) - to copy to excel
    I would like to keep them general, with different possible combinations
    among them ( up to 10 different object types ), according to some specs.
    Has anybody idea, if it is possible ? ( prefarably with 1.4 D&D interface ).
    Data are packed in createTransferable() call, but it allows just 1 format (?) ...
    Maybe I can use some 'envelope' format holding all possible information,
    but that idea doesn't looks nice for me :(
    Thanks for any hint.
    Tibor

    Hi !
    Thanks for your help. For drag & drop it's fine. System will ask for 'best' format as I expect.
    How is it with clipboard ? I had idea to copy table columns as a "text" flavor
    ( for paste into excel ) and user created flavor "id" with documentId inside.
    On paste I would take 'what's better' ( e.g. as a document reference better would be better my "id" flavor,
    because that information doesn't need to be in table cells inside ).
    Maybe I will have to use 'own' clipboard for these reasons.
    Tibor

  • How can I copy all the comments from my picture/s in fotostream to my picture/s in my library?

    How can I copy all the comments from my picture/s in fotostream to my picture/s in my library?

    Hi, first, you should prevent the iTunes library auto sync with iPhone: Launch iTunes > click Preferences... > click Devices. In the window, check the option 'Prevent iPods, iPhones, and iPads from syncing automatically'. Next, connect your iPhone with your computer via the USB cable. Click the mini menu for iTunes on the very top left and click the option 'Show menu bar'. After then you can see iTunes File, Edit, View, Control, Store and Help menus on the ribbon. Click File > Devices > Transfer purchases from (your iPhone name). You can also access to the File menu by holding down Alt (Option on Mac), Shift and F keys. This is how to get your iPhone purcahsed song transferred to iTunes Library.

  • How can I copy all the files from my iMac to an external drive so they remain as 'regular accessible files'? I want to clean my dive

    How can I copy all the files from my iMac to an external drive so they remain as 'regular accessible files'? I want to clean my dive

    You can use a program like Carbon Copy Cloner.  It will clone your HD to the external.  The format is the same as your internal drive and you can boot from it using Option key at boot time.
    http://www.bombich.com/
    Regards,
    Captfred

  • How can I copy all the info from a contact card in address book to paste into a documnent?

    How can I copy all the info from a contact card in address book to paste into a documnent?

    Tom Wolsky wrote:
    The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
    You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
    Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
    I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

  • Conditions maintained in purchase order that can be copied to the proforma

    Hi every body,
    In STO process, freight or what ever the  conditions maintained in purchase order that can be copied to the proforma Invoice, is it possiable, if yes please let me know!
    Thanks in advance
    Regards

    Yes you can copy the conditions from STO into delivery. For this you need to have the same condtion types defined and also need to write routines in SD pricing.

  • CIC - Copy to the clipboard

    Hello,
    When user, on transaction CIC (l-shape), click on the ISU-Finder to find a BP by giving a premise number it should copy to the clipboard the BP when i click on the checkmark button. This part is build by SAP.
    I am trying to copy the Premise to the clipboard by using user-exit EXIT_SAPLEECIC_COMP00_001. I tried many attempts by using SAP function modules in order to create a Business Object Premise and add the element to the clipboard.
    I tried FMs such as :
    CALL FUNCTION 'CIC_EVENT_RAISE'
         EXPORTING
              event  = 'ADD_XTAINER_TO_BDD'
              p1     = xtain
         EXCEPTIONS
              OTHERS = 99.
    When i used this one, i got an item in the clipboard but it said : Uninitiliazed Business Process Unit.
    Does somebody have to code a 'Copy to Clipboard' for a businness object.
    Thanks

    I found byselft the solution. Here the step for those who have to do the same:
    Copy Premise to the clipboard (BDD)
      l_procobj-header = 'OBJH'.
      l_procobj-type   = 'SWO'.
    Create object Premises
      CALL FUNCTION 'SWO_CREATE'
           EXPORTING
                objtype = 'PREMISES'
                objkey  = l_key
           IMPORTING
                object  = l_procobj-handle
                return  = l_return.
      IF NOT l_return IS INITIAL.
        EXIT.
      ENDIF.
    Set Object ID
      CALL FUNCTION 'SWO_OBJECT_ID_SET'
           EXPORTING
                object    = l_procobj-handle
                objectkey = l_key
           IMPORTING
                return    = l_return
           EXCEPTIONS
                OTHERS    = 1.
      IF NOT l_return IS INITIAL.
        EXIT.
      ENDIF.
    Buffer Refresh
      CALL FUNCTION 'SWO_OBJECT_REFRESH'
           EXPORTING
                object       = l_procobj
           EXCEPTIONS
                error_create = 02.
      l_def-element      = '<MAINOBJ>'.
      l_def-editorder    = 2000 - 1.
      l_def-reftype      = 'O'.
      l_def-refobjtype   = 'PREMISES'.
    APPEND l_def TO li_def.
      CALL FUNCTION 'EWO_XTAINER_ELEMENT_SET'
           EXPORTING
                x_elemdef       = l_def
                x_value         = l_procobj
           CHANGING
                xy_xtainer      = l_desk_xtain
           EXCEPTIONS
                invalid_elemdef = 1
                internal_error  = 2
                OTHERS          = 3.
      CALL FUNCTION 'CIC_EVENT_RAISE'
           EXPORTING
                event  = 'ADD_XTAINER_TO_BDD'
                p1     = l_desk_xtain
           EXCEPTIONS
                OTHERS = 99.

  • Receive error: There was an error while copying to the Clipboard. An internal error occurred.

    I receive the message "There was an error while copying to the Clipboard. An internal error occurred." when I highlight anything and copy to the clipboard. I've searched and found others with the same issue, but they were either on an older OS, Acrobat ver, or their issue was intermittent. My issue always occurrs and I cannot copy anything to the clipboard.
    I'm running Win 7 Ultimate x64 SP1 and Acrobat Pro 9.4.4. Any suggestions would be appreciated.
    Thanks,
    RJ

    Hi MelSchultz,
    Thanks for your post. However, this Forum is meant to discuss
    issues related to acrobat.com and not acrobat. To post an issue
    related to acrobat please visit the acrobat forum :
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
    You may also open a web case with Adobe Support. To do so,
    please visit the following link :
    https://www.adobe.com/cfusion/support/index.cfm?event=portal

  • Safari copy wipes the clipboard

    Anyone else have this in Safari 4 for Windows?
    I use Safari at work, often copying and pasting text; in Safari 4 I have noticed an issue that when I have text in the clipboard and use the keyboard shortcut to paste the text into a text box on a web page.
    Here's what happens, I first have some text I copied into the clipboard, when I accidentally hit Ctrl-C instead of Ctrl-V the clipboard gets wiped out as Safari copies a null amount of text into the clipboard, thus if I realize my mistake and try to do a Ctrl-V my previously copied text has disappeared from the clipboard and nothing pastes.
    Yeah I know I should learn to type better, ha ha, but we all occasionally make mistakes and it's infuriating when this happens. I am sure this was not the behaviour Safari 3 and also this issue does not occur in FireFox and I think most other browsers out there.
    I clean installed Safari on a new install of Windows on a virtual machine and was able to recreate the issue.
    Any thoughts?
    Phil
    Message was edited by: sixfootphil

    I found byselft the solution. Here the step for those who have to do the same:
    Copy Premise to the clipboard (BDD)
      l_procobj-header = 'OBJH'.
      l_procobj-type   = 'SWO'.
    Create object Premises
      CALL FUNCTION 'SWO_CREATE'
           EXPORTING
                objtype = 'PREMISES'
                objkey  = l_key
           IMPORTING
                object  = l_procobj-handle
                return  = l_return.
      IF NOT l_return IS INITIAL.
        EXIT.
      ENDIF.
    Set Object ID
      CALL FUNCTION 'SWO_OBJECT_ID_SET'
           EXPORTING
                object    = l_procobj-handle
                objectkey = l_key
           IMPORTING
                return    = l_return
           EXCEPTIONS
                OTHERS    = 1.
      IF NOT l_return IS INITIAL.
        EXIT.
      ENDIF.
    Buffer Refresh
      CALL FUNCTION 'SWO_OBJECT_REFRESH'
           EXPORTING
                object       = l_procobj
           EXCEPTIONS
                error_create = 02.
      l_def-element      = '<MAINOBJ>'.
      l_def-editorder    = 2000 - 1.
      l_def-reftype      = 'O'.
      l_def-refobjtype   = 'PREMISES'.
    APPEND l_def TO li_def.
      CALL FUNCTION 'EWO_XTAINER_ELEMENT_SET'
           EXPORTING
                x_elemdef       = l_def
                x_value         = l_procobj
           CHANGING
                xy_xtainer      = l_desk_xtain
           EXCEPTIONS
                invalid_elemdef = 1
                internal_error  = 2
                OTHERS          = 3.
      CALL FUNCTION 'CIC_EVENT_RAISE'
           EXPORTING
                event  = 'ADD_XTAINER_TO_BDD'
                p1     = l_desk_xtain
           EXCEPTIONS
                OTHERS = 99.

  • Can this copy of the version be upgraded to Adobe Photoshop CS5 for Mac?

    hello.
    i am using Adobe Photoshop Elements 5 for Microsoft Windows.
    Can this copy of the version be upgraded to Adobe Photoshop CS5 for Mac?

    This forum is to discuss the operation of the forums, not products
    Try http://forums.adobe.com/community/photoshop

  • Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro.  the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

    Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro.  the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

    Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
    You can open Disk Utility several ways.
    1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
    2. Open a new finder window (File> New Window)
    - Applications>Utilities>Disk Utility
    3. Click on the Finder
    - Click 'Go' in the menu bar across the top of the screen.
    - Click Utilities, then double click on Disk Utility.
    Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
    (By Default it is named Mac HD or Macintosh HD)
    Click on it to highlight it.
    There should then be a few buttons you can click
    - Verify Disk Permissions
    - Repair Disk Permissions
    - Verify Disk
    - Repair Disk
    Click Repair Disk Permissions

  • How do I retrieve/view content that I've copied to the clipboard at various times over the course of the evening ??

    Is it possible to look at different content I've copied to the clipboard at several times over the course of an hour or two. Note: I have NOT turned off my browser or restarted my computer.

    Nope, the Windows clipboard only save one item at a time. Copy something and the previous "copy" is gone. You would need a Windows program that saves multiple clipboard entries.

  • Any single file in my local folder of RoboHelp 10 which can be copied onto the application server?

    Pleasant Hello Pals, ( This is Vipin Nambiar from Bangalore)
    I am currently evaluating Adobe Robohelp 10 version for one of my technical architecture writing. Requesting help at the very earliest for the below-said big time hurdles.
    I have completed my technical writing for a in-house application system and have generated and viewing the primary layout (courtesy File -> View -> Primary Layout. ) as Contents, Index, Glossary and would like these to be hosted onto the server so that all the users of this application can access these Contents, Index, Glossary and act as a knowhow notes to use this application.
    Is there any single file in my local folder of Adobe RoboHelp 10 which can be copied onto the application server ?
    (My Adobe RoboHelp 10 local folder contains
    a.)Sub-folders called !Language!, !ScreenLayout!, !SkinSubFolder!, !SSL!
    b.)File Types called *.ALI File, *.APJ File, *.Bitmap image, *.BRS File, *.Cascading Style Sheet Document, *.CPD File, *.FPJ File, *.GIF image, *.GLO File, *.H File, *.HHC File, *.HHK File, *.HHP File, *.HTML Document, *.HTT File, *.JPEG image, *.JScript Script File, *.LDB File, *.PPF File, *.PSS File, *.Robohelp HTML Project File, *.SSL File, *.XML Document)
    Any help here will serve me in plentious

    First, your username cannot be changed and it is not a good idea to have email addresses visible on any forum, unless you enjoy reading spam.
    This question is covered in the online help. When you create an output it is generated to whatever folder you specify in the single source layout. Everything that is in that folder needs to go on the server.
    If the help is in !SSL! > WebHelp, then everything in that folder including sub-folders is what needs to go on the server.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for