Can't create the positions of a Handling Unit

Hi everyone,
I am using WS_DELIVERY_UPDATE funcion to do the packing of a delivery. Everything is apparently ok and the packing seems to be done, but then if I check in VL03N transaction, Pack and then Total content I can't see any positions created for the Handling Unit.
Does anyone know if I have to execute something else after the function for creating the positions of HU?
Thanking you in advance,
Nisha

HI,
Yes it will update VEPO/VEKP and related DB's.
Unfortunately, I dont have a sample code to share with you but I have used this in my previous accounts.
It should not very cumbersome to know what to pass to the BAPI as the Import Interface is not tht huge
Hope this helps.
Gary
P.S: Reward if helpful

Similar Messages

  • How can I find the position of a robotic arm with a cFP-CTR card?

    Hello,
    I use a CTR-500 to measure the pulses of 3 encoders.
    The encoders are related to the 3 axis (x,y,z), to which a robotic arm is moving.
    Each encoder has 2 channels (A,B) which go to each pair of Count Inputs of the CTR card.
    When the robotic arm is moving on one axis, the corresponding pair of Count Inputs is increasing, but there is a phase between the one Count Input and the second one. What is more, the Count Inputs do not decrease when the robotic arm is moving to the other direction, but they still increase.
    So, I cannot find easily the position of the robotic arm.
    What I have done, is to try finding the position, by using only one Counter Input for each axis. This means that I use the value of the encoder as a counter, and I calculate the position with some software tricks. But for some reason, it does not work properly.
    I have heard that the method I use is not proper. Instead, I have been told that I must use the phase of the 2 Count Inputs, in order to find the direction to which the robotic arm is moving. But, the Count Inputs of the CTR are augmenting in parallel, when the robotic arm is moving forward or backward.
    How can I find the position of the robotic arm, as it is moving like a CNC ?
    Thank you very much.
    Message Edited by nikosfs on 08-21-2009 12:27 PM

    You don't want to use a cFP-CTR-500 card.  What you have are quadrature signals.  You should be using the cFP-QUAD-510.  It has 4 channels that can handle both the A and B signals of a quadrature encoder.  It has the built in circuitry do determine the phasing of A vs. B to know when to count up vs. count down.

  • How can I should the position number in sequence via ppom_old or ppome

    Our user creates the position number via ppom_old and get the position number from this screen.  The position number has been shown on sequence.   However, something seems collapse.  Do you guys know how I can show insequence again?

    It is based on Priority (Edit-> Priorirty)
    Use                                                                               
    Sequence Priority of Objects
         The Priority  field is optional. It is used to determine the sequence in  
         which objects are presented in Simple Maintenance and Structural          
         Graphics.                                                                               
    When multiple objects are located on the same hierarchical level of a     
         structure, these must be ordered in a specific sequence from left to      
         right (or from top to bottom).                                                                               
    This is done by assigning alphanumeric priority values, where the value   
         1 is the highest (far left or top) and 99 the lowest priority (far right  
         or bottom).                                                                               
    If you specify no priority, the system places objects according to their  
         object IDs.                                                                               
    Priority When Defining Evaluation Paths                                                                               
    It is only necessary to prioritize evaluation paths as an exception.    
         Generally, you should use '*', so that all relationships are read.                                                                               
    Use the Priority  field to define evaluation paths if you want only     
         objects which are assigned a certain priority (see above) to be         
         considered in an evaluation path.                                                                               
    Note                                                                               
    You can find more information on the meaning of the priority field with 
         reference to evaluation paths in the online IMG documentation for       
         'Maintain evaluation paths'.                                                                               
    Priority for Responsibilities                                                                               
    If you are using responsibilities for role resolution in Workflow, you  
         Example: There are various responsibilities for a standard role for       
         processing orders, grouped, for example according to order value (one     
         responsibility for orders up to a certain value, another for orders with  
         a greater order value).                                                                               
    Assuming that orders for a particular customer are always to be           
         processed with the same responsibility (and therefore by the same         
         agent), you can access it via another responsibility with a higher        
         priority that contains the customer name as the only criterion. The       
         responsibility (-ies) with lower priority, and therefore the order        
         value, is then no longer taken into account during agent determination.                                                                               
    Use only numeric values here, and note that, logically, the               
         responsibility with the highest numberic value in this field has the      
         highest priority.                                                                               
    Procedure                                                                               
    1.  Sequence Priority of Objects                                          
             In Create mode, assign a priority to the objects you wish to rank.    
             To do so, assign an alphanumeric value (1, 2, 3... or A, B, C...) to  
             each object.                                                          
    2.  Priority When Defining Evaluation Paths                             
        In the Priority field, enter the priority or priorities for objects 
        that should be considered in evaluation paths. Enter "*" if you want
        to have no restriction.                                                                               
    3.  Priority for Responsibilities                                       
        Maintain the priority directly in the detail screen for the         
        responsibility or in the overview screen for the responsibilities   
        for the rule. Note that you must use numeric values here. On the    
        overview screen, the system sorts the responsibilities in descending
        order of priority.

  • Can I control the position of the page background image?

    Hi All!
    My simple question: Can I control the position of the background image for example in a user-made style? I mean can I make the position of the image to center rather then tile? If it possible without editing the html code...

    To create a background image for a region create a table nested within that region using the following definition <TABLE WIDTH="100%" HEIGHT="100%" CELLPADDING="0" CELLSPACING="0" MARGIN="0" BORDER="0"> and create an image call integrated into the <TD> tag within said table.

  • I can't see the positioning toolbar in robohelp!

    I can't see the positioning toolbar eventhough i have it
    clicked on, with a tick next to it, under the toolbar menu. I have
    browsed this forum before and done a number of things that have
    been suggested to try and solve this issue, these include:
    - opening a new topic to see if its there
    - creating a new topic and checking if its there
    - maximising and minimising robohelp to saee if its lurking
    anywhere there
    - reducing my windows toolbar
    - changing the registry - specifically the Toolbarvisible
    property
    However none of them have worked! One thing that i have also
    noticed is that i am not able to send a positioned text box to the
    back of a robohelp topic, i think this must be linked to the
    toolbar issue given that this function can be found on the
    positioning toolbar (according to the robohelp manual).
    Oh and for the record i am in version X5 and generating
    webhelp.

    Duplicate post - Please reply to original at
    this
    link

  • Can not create the connection in the enrironment!!

    hello,every one:
    please see the following code:
              Environment *env = Environment::createEnvironment(Environment::OBJECT);
              Connection *conn = env->createConnection(userName,password,connectString);
    try
    //use the conn
              catch (SQLException &ex)
                   env->terminateConnection(conn);
                   Environment::terminateEnvironment(env);
                   throw;//re-throw
              env->terminateConnection(conn);
              Environment::terminateEnvironment(env);
              Environment *ev = Environment::createEnvironment(Environment::OBJECT);
    //the program stopped here,display i can not create the new connection
              Connection *cn = ev->createConnection(userName,password,connectString);
              ev->terminateConnection(cn);
              Environment::terminateEnvironment(ev);
    I have terminated the connection and the environment,then why I can not create the
    connection in the new environment?
    I have tried several times,if you connect the same database as the former,then it
    does not work,but if you connect a new database ,it can create the new connection!
    plus:I don't want to use conection pool .
    Can I have some method to solve the problem?
    Please help me!
    Thanks a lot in advance!
    tony from China

    Hi Tony,
    This similar sample works perfectly fine for me. Can you
    retry with this?
    #include <iostream>
    #include <occi.h>
    using namespace std;
    using namespace oracle::occi;
    int main()
            Environment *env = Environment::createEnvironment(Environment::OBJECT);
            Connection *conn = env->createConnection("scott","tiger","inst1");
            try
            //use the conn
            catch (SQLException &ex)
                    env->terminateConnection(conn);
                    Environment::terminateEnvironment(env);
                    cout<<ex.getMessage();
            env->terminateConnection(conn);
            Environment::terminateEnvironment(env);
            Connection *cn;
            Environment *ev;
            try{
            ev = Environment::createEnvironment(Environment::OBJECT);
            cn = ev->createConnection("scott","tiger","inst1");
            catch (SQLException &ex)
                    ev->terminateConnection(cn);
                    Environment::terminateEnvironment(ev);
                    cout<<ex.getMessage();
            ev->terminateConnection(cn);
            Environment::terminateEnvironment(ev);
    }Rgds
    Amogh

  • How can I get the Airport Express to handle all the PPPoE stuff?

    Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
    We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
    What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
    I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
    How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
    Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

    Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
    Direct ethernet cable connection to my Macbook works fine.
    When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
    But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
    thanks
    Paul

  • Bank Analyzer - Error while creating the Position Structure

    Hi,
    We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
    We facing an Error while creating the Position Structure,
    Error Message: Status of structure S40CURRACC is "New"
    Anyone has an idea how to fix this?
    Thank you,
    John Crawford

    Hi,
    1.Run Transaction - /BA1/F0_SGS_START
    2.Entered the name of the structure and try to "activate". 
    3.It will get Active without any inconsistency.
    Regards
    Phani

  • TS2167 i'm getting an error message.. can't create the file "header.jpg." The disk may be damaged or full, or you may not have suuficient access priveleges.

    I need to publish to a local folder on my desk top and I am getting this error message.
    can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
    Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • Can we create the Purchase order that using P&L account or just using account do not use cost center.

    Dear Experts,
    Could you please advise :
    1) Can we create the purchase order that using profit and loss account ? ( if yes , which kind of account assignment category we should use ?)
    2) How to create a purchase order for service charge .( just using GL account )
    Thanks & Best Regards,
    Watson

    Hi,
       May I know why you do not use cost center for consumption?
       You may create a new account assignment category in OME9 by copying K and maintain the cost center as optional. Please note that you have to maintain the item category blank and the account assignment category combination in OMG0. Now, you can use a GL account in PO which doesnt require a cost center assignment (in OBC4 against the field status group of the GL)
       You may use the same account assignment category created in the previous step with item category D, after you maintain the combination of the account assignment with item category D in OMG0.
        Please test the scenario and revert back.
    Regards,
    AKPT

  • How can we create the error log in a ABAP program

    Hi all,
    How can we create the error log in a ABAP program
    Thanks,
    srinivas.

    Hi,
    Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
    Regards
    Raju Chitale

  • How can i create the exceptions in query

    Hi Firends,how can i create the exceptions for key figures and charectristics and how can can i assign the colours and when we will create the variables for exceptions..
    please let me know..
    Assign Points surely..
    regards

    Hi,
    Not sure i understnad your request 100%, but exceptions for key figures are created as explained in http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
    and
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/615f64816311d38b170000e8284689/content.htm
    Assign points if useful,
    Xibi

  • How can I create the component like ComboBox in flashlite2.0 ?

    How can I create the component like ComboBox in flashlite2.0
    I'm a new man, please gave me an example!
    Thanks.

    I don't see anything special about the play button in MPMoviePlayerController....
    the "glowing" effect icons are all standard UIBarButtonItem objects:
    http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UIBarBut tonItem_Class/Reference/Reference.html

  • How Can I create the new security answers?

    How Can I create the new security answers?

    Read this about how to change the security questions: http://support.apple.com/kb/HT5312
    If you can't use these procedures contact Apple. See http://support.apple.com/kb/HT5699

  • How can i create the blue "I"-Button for the Documentation in a view

    How can i create the blue "I"-Button for the documentation in a view?
    I want to prepare the button with user specified Information...
    and where must be create the documentation?
    thanks
    Edited by: DDC-TD on Apr 24, 2008 10:22 PM

    you have not mentioned where do u want the " I " information button ,
    1. If u want for a report , u can get the information button on selection-screen only .
       if u goto se38 on the mail screen u will find a radio button for documentaion ,
    when u select it and click 'create' or 'change' , an editor will open and u can document anything there ....
    2. Or specify where u want  info button .
    thanks ,
    reward points if usefull.

Maybe you are looking for