Can't display flash information after latest Vista Update..

Hello all,
I am currently running Windows Vista with Internet Explorer 8
RC 1. I went onto a webpage where it said that I did not have the
latest version of Adobe Flash Player installed. I installed the
latest player, version 10.0.22.87. It says that everything is
installed correctly. When I look at the page:
http://www.adobe.com/flashplatform/
Nothing shows up. It says that I need to go and install the
latest version of the Flash Player again. It was working just fine
a few days ago but after the latest Vista Windows Update, this
problem is showing up. Anyone have any ideas??

Dav4783, are you trying to adjust the brightness up or down? Does the phone seem brighter or darker than it was before? Have you tried powering the phone off and then adjusting the brightness again?
Here is a list of what the current software updates:
Symptoms Resolved:
In set up wizard, clock format, selecting preview of clock is OK, but there is no soft key to go back to clock format.
Fixed verbiage on popup messages to read as:
"Use PC option to safely disconnect, before unplugging USB cable from the device."
"PLEASE BE SURE TO SAFELY DISCONNECT YOUR DEVICE FROM THE PC BEFORE UNPLUGGING THE USB CABLE."
When you have a data session that is getting information the circle indicator should rotate in a circle, the red section should move around the circle showing user that it is getting data - it does not rotate.
Facebook UI under Messages - select write on wall. On device it says 'set contact id', instead of 'select contact'.
Chinese input - increased Chinese font size from 18 to 22.
Quick Text was not converted to Chinese (remained in English).
Changed text to "select Internal Display theme" in setup wizard, display themes.
When a customer tries to send an SMS using (app info > Menu > Tell a friend), in some cases the phone may reset.
When a user tries to download tones in a memory full condition, the device sometimes doesn't display the memory full popup.
Added a List option under Easy Setup > Clock > Preview.
Setup Wizard: After selecting a language in the Setup Wizard, the delete screen that follows should have the languages listed in their native tongue (so for English it would say "Simplified Chinese, Korean").
Moved Erase option to Options and added a List option under Media Center > Pictures > My Pictures in the picture view.

Similar Messages

Can I install Flash CS4 after installing, activating & updating Photoshop CS5 ?

Can I install Flash CS4 after installing, activating & updating Photoshop CS5 ?

Sure. I have Flash 8, CS3,4,5 all installed and each will run.

K210 Vista Home Premium not booting after latest Vista Update.

This is my pc specs:
Lenovo IdeaCentre K210 Intel Desktop PC - Intel Celeron Dual Core E1200 1.6GHz, 2GB DDR2, 320GB SATA II, DVDRW, Intel GMA3100, Webcam, Veriface, Flash Reader, Vista Home Premium SP1
After the latest windows update on February 12th, 2009. I woke up to my pc error beeping continously at the prompt before windows should boot up.
I have only had this lenovo pc for 5 months and it was working perfectly fine before this update. Onekey recovery is not working. I cannot get it to boot from a dvd or cd. I tried a recovery disc, did not work. I changed the pc to boot from the dvd and that did not work.
If I have it boot normally I get the continous error beeping.
The fact that I am writing this from my 6 year old HP computer makes me rethink my recent purchase of the Lenovo brand.

Phantera wrote:
After the latest windows update on February 12th, 2009. I woke up to my pc error beeping continously at the prompt before windows should boot up.
If you think a windows update caused the problem; are you able to say which update caused the problem?
You could also describe the beep error more precisely before it boots into windows. Or is windows not working at all in normal or safe mode?
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

LMS 4.2.1 upgrade from 4.0.1: can't display job information : http 404 error

HI,
Since customer has upgraded from 4.0.1 to 4.2.1, he can't display job information when he select job number.
He has http 404 error.
He has same error when he want to see threshold configuration:
Menu Monitor>Fault Monitor > threshold setting
We noticed that there is many files on C:\Program Files (x86)\CSCOpx\files\rme\dcma\devfiles.
We can see that CollectionSummary has 4 collector name which are loading status:
Configuration-> Dashboard -> Configuration
- Inventory collection
- Config archive
- EnergyWise
- Fault Discovery
Many thanks for your help,
Elisabeth

Doesn't look like it was tested. Checking why ...
Zach

Safari can't connect after latest Lion update

Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

Can you display some text after you have checked a yes or no box?

Can you display some text after you have checked a yes or no box?
Ex:
Yes (Please contact Bob x3-1234) only want it to appear when you check box)
No

Sure. If you use a field (button, text field) to display the text, the Mouse Up script of the Yes check box could be:
getField("button1").display = event.target.value === "Yes" ? display.visible : display.hidden;
Change "button1" to the actual name of the field and "Yes" is the export value of the Yes check box. You can use whatever you want, and you'll probably want to make the button read-only as well.

Can't restore backup up after latest update in operating system

after latest ipad update I canot restore backup. Ipad version is 7.0.6 (11B651) ITunes version 11.1.5.5
It attempts to restore from backup for about 30 minutes then stops and displays a message "ITunes cannot restore backup it is not compatable with IPad being restored

Since your profile above mentions iOS 5.1.1, I wonder if you are trying to restore to an original iPad.
If not, I wonder if you are trying to restore to some iPad that is not running iOS 7.0.6. You cannot do that.

Iphone 4 not recognized and will not sync after latest itunes update. I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

CAN'T open any applications after mac os update 10.4.11

CAN'T open any applications after mac os update 10.4.11 help

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Latest Vista updates freeze mouse on Bootcamp

The latest Vista updates on my Bootcamp partition cause my Apple wireless mouse to not function in Windows Vista (on the bootcamp partition).
Used it just fine for several years and it still works just fine on OSX Mountain Lion.
Tried the following options to remedy:
- renew the bluetooth pairing on OSX, then restart Windows
- start Windows in safe mode: this works fine, cause mouse is working fine
However, this does not help, as bluetooth mouse does not work (move) in Vista normal mode.
Anybody any suggestion how to get my mouse working again on bootcamp Vista ?

First of all, thanks very much for trying to help !!
Here is the output of the utility as you asked (quite a handy thing btw):
Hardware Information:
          iMac (24-inch, Early 2008)
          iMac - model: iMac8,1
          1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          ATI Radeon HD 2600 Pro - VRAM: 256 MB
System Software:
          OS X 10.8.5 (12F37) - Uptime: 0 days 3:16:6
Disk Information:
          WDC WD5000AAKS-40YGA1 disk0 : (500,11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209,7 MB
                    Main (disk0s2) /: 390,19 GB (172,93 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 109,06 GB (52,62 GB free)
USB Information:
          Apple Inc. Built-in iSight
          Canon CanoScan
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [failed] com.apple.accountsd.plist
          [failed] com.apple.AirPlayUIAgent.plist
          [failed] com.apple.coreservices.appleid.authentication.plist
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [not loaded] com.teamviewer.teamviewer_service.plist
          [loaded] com.wdc.drivemanagerservice.plist
          [loaded] com.wdc.WDDMservice.plist
          [loaded] com.westerndigital.WD-Drive-Manager-Installer.plist
          [loaded] com.WesternDigital.WDSmartWareD.plist
Launch Agents:
          [not loaded] com.teamviewer.teamviewer.plist
          [not loaded] com.teamviewer.teamviewer_desktop.plist
          [loaded] com.wdc.drivemanagerstatusmenu.plist
User Launch Agents:
          [loaded] com.google.keystone.agent.plist
User Login Items:
          GrowlMenu
          LG_N1A1
          Dropbox
          WDDriveUtilityHelper
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          Growl
          Java
          MacFUSE
Internet Plug-ins:
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          LogMeIn.plugin
          LogMeInSafari32.plugin
          LogMeInSafari64.plugin
          nplastpass.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
              1%          gssd
              1%          WindowServer
              1%          EtreCheck
              1%          Pages
              0%          netbiosd
              0%          ps
              0%          fontd
              0%          Finder
              0%          notifyd
              0%          mDNSResponder
Top Processes by Memory:
          147 MB             mds
          135 MB             Finder
          61 MB              Pages
          53 MB              Dropbox
          53 MB              WindowServer
          45 MB              coreservicesd
          41 MB              Preview
          37 MB              Dock
          29 MB              filezilla
          29 MB              TextEdit
Virtual Memory Statistics
          2.23 GB            Free RAM
          430 MB             Active RAM
          887 MB             Inactive RAM
          490 MB             Wired RAM
          1.50 GB            Page-ins
          0 B                Page-outs

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?

Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

Garmin GLO portable GPS quit working after latest Apple update

Garmin GLO quit working after latest Apple update ?

I am using Mountain Lion. I reset the system a thousand times. The Mac communicates fine with the printer, that's not the problem. Somehow, recently something changed in the ppd file for the LaserJet 1320 that it simply does not print properly. For instance, I sent a job to print two pages, and use the duplex. The duplex works, but then the other side comes out empty. Is there a place I can find the old - less secure, I don't care, I just want to print - ppd file for controlling the printer? I think the printer only supports certain level of Postscript commands, and the new ppd file expects a new level. This printer is 8 years old after all. If I plug the printer in Linux, it prints the same document fine.
Thanks for any help

VMware wont start after latest kernel update!

Okay when i went to reboot it went to boot into arch but wile it was loading the vmware modules it would stay stuck at loading vm communication interface socket family and would just stay there the only way i could even boot into arch was to edit my grub so i could login and at least comment out vmware i tried to reapply the vmware patch fix that was on the wiki and had no luck also tried reinstalling + reapplying patch after words and still no luck I'm hoping this is happening to someone else as well and not just me (mean i know lol) I also tried virtualbox but seems it has it's own mess of problems as well after latest kernel update.

I have tried rebuilding the the kernel image and even tried reinstalling grub with no luck. After not having a usable system for several days I ended up just having to reinstall and maybe found out more about the problem. Using the net install image and a 64 bit install this time making a EXT2 boot and a root partition of JFS right after install I get a panic during boot about how the system can't find a valid filesystem on what would be root partition. Even when passing the "rootfstype=jfs" to the kernel line in grub it still errors out telling me that it is "Bailing out, your on your own. Good luck!" (pretty funny error messages if you are not ripping your hair out). After that I redid the install this time making a EXT4 root partition and everything is working.
It seems to me that this all points to a problem with JFS on 64 bit systems, my other systems are all 32 bit and usign JFS root just fine... can anyone else confirm this?
Last edited by vendion (2011-01-12 13:39:56)

Can't display flash information after latest Vista Update..

Similar Messages

Maybe you are looking for