Can't edit outlook email in HTML- whole message replaced with "undefined".

In editing the html of messages in Outlook using Firefox browser, I click on options -> edit in HTML and whether or not I do anything to change the email whilst in the HTML editing option, as soon as I click on Rich Text to check the formatting etc the whole body of the email is replaced with the word 'undefined' and there is no access to saved drafts of that message.
This has been happening for several months now and it's mega frustrating. I would appreciate any light being thrown onto this issue, thanks

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

How can I delete ALL contacts on my iphone and replace with an updated file from my Outlook on PC

how can I delete ALL contacts on my iphone and replace with an updated file from my Outlook on my PC

iTunes running, your phone connected, on the Info Pane, scroll down to "Advanced". Put a check in the box labeled "Replace Info on this Phone for Contacts" on next sync. Hit the apply/sync button.

How can I edit the email on a PDF form that's not created by me?

I'm a beginner for Acrobat Pro and there is an email button on the form for user to email to the previous admin, how can I change the email addres to mine? When I try to edit on forms, it asked me to click "save a copy", I really can edit and changed to email address, however when I tested it, it said this is only a data but not a form.

Tools > Content > Edit Document Text
Better yet, edit the original source document, create a new PDF, and replace the old pages with the new: Tools > Pages > Replace

I can't edit my email settings?

Just recently I have had a problem with being able to edit my email settings, when I go to main menu > set up > Email accounts it comes up with a username and password.
I assume the username that it is requesting would be an email adderess so I've tried all of mine and all of my passwords in the box, it doesn't seem to be accepting any of them. Also according to my service provider and my sisters blackberry it's not supposed to be requesting any type of username or password there.
I have three email accounts: Googlemail, Window's live mail and my blackberry email account.
Can you offer any help in this siutation at all.
My service provider is 3 UK.
Solved!
Go to Solution.

It's resolved now.

I closed the cover on my IPad with a draft email open. Now I can only edit the email but cancel and send are grey and nothing else in email seems to work. What to do?

I closed my iPad cover with a draft email open. When I reopened the cover, the cancel and send buttons are grey and all I can do is edit the email. The email app seems frozen. What do I do?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work (or if you can't get to the homescreen) then do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How can you edit the Email Address field in Mail without deleting the account?

I have a few accounts and the email address domain of my work account has changed but it seems to be one of the fields you cannot change.
On my iPhone it was simple ... you can just edit the field and it works.
My Email comes in fine but mail auto selects accounts based on the domain of who you are emailing and now that it has changed its not doing that anymore.

If you're running iOS 6, to change your iCloud ID go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.

How can i edit my email

reset security there is rong in the email how can i edit my email

The idea of a Recovery email is so the rightful owner accomplishes the recovery, so I don't know of a process to edit that address if you don't know the Apple ID and associated Password.

How can i read outlook emails (from my Dell) on my mac?

Hi! I have saved all my outlook emails from my PC to a hard drive and want to view them on my macbook. Do i have to buy the full office/outlook software package or is there another way to read them?
I have word and xls on my mac from buying the student office package... but want to avoid buying it all again if i can just read the emails on another reader or just buy the outlook email software...
Thanks
Graham

can annyone assist me whit this problem?
Not without providing more information about the type of email account (POP3, IMAP, or Exchange) and what settings you use in the account

Can't edit a parameter in HTML

I'm trying to change "middle" to "top" in code you see below.
When I make the change and save the topic, RH7 undos the
change whenever I switch out of HTML editing mode to Design mode (I
presume that's when it happens, since it doesn't happen before my
eyes while I'm looking at it and it has changed back when I
re-enter HTML editing mode from Design mode).
My first thought was that a style sheet was overriding my
changes. I checked the style sheet that the topic's associated with
and I couldn't find a TR specification anywhere, just a TD one, and
even that doesn't specify an alignment.
Why is RH7 not accepting my change?
And: Assuming that a style sheet is, somehow, overriding the
edits I make in HTML mode and I'm overlooking the style somewhere.
How do I force RH7 to accept my change no matter what?

quote:
Originally posted by:
MergeThis
The ost likely things that come to mind:
* You're working over a network (bad).
* You're working in a topic that's assigned to a template or
master (whatever they call it in RH7).
* You have style info inside the HEAD section of the topic.
* The style assigned to the text in the table rows is
superceding the table cell alignment.
1: Nope.
2. There is a CSS style sheet assigned to it, but like I say
there are no definitions in that stylesheet that would seem to
conflict with it--but even if so, say I'm overlooking something,
how could I override that?
3: Not that I see.
4. No, for if I make a blank table from scratch using just
HTML then RH7 still injects things on its own.

Can you edit an email attachment using google documents or somethiing similar

I was wondering if anyone knows if there is a way to edit an email document attachment. Is there something similar to google documents.

Documents to Go, Pages (or Numbers as appropriate), at least half a dozen "office" apps for the iPhone are available. You could save it to box.net or dropbox and then transfer it to google docs, but I've found google documents on the iPhone to be frustrating to use at best for editing.

Can the hdd part of the fusion drive be replaced with a large sata ssd?

Is there any technical reason why the mechanical (hdd) can't be replaced with a large sata ssd in the fusion drive setup?

None of these replies addressed the reason for my original question.
I do appreciate the answers however I see I should have been a bit more thorough in my query.
I know how the fusion works. I know you can get a 1 tb ssd with the imac.
I also know that it is very very expensive to get a pure pcie 1 tb ssd as an option.
The reason for my question is to see if the sata ssd which is a little slower and also much much cheaper than pcie flash ssds can be used instead of the slow
hdd in the fusion configuration. I have ordered the 512 gb pcie flash for my imac so I am committed to pure ssd. I would still like to know if
what I mentioned is possible as a much less expensive option.
Sorry for the confusion but in a rather lengthy search throughout the net and asking Apple's Geniuses I have been as yet unable to get any answer.
It would seem to me that using a sata ssd instead of a sata hdd would be nothing but beneficial in the fusion setup.

HT3748 since upgrading to Mountain Lion, my Mac Mail no longer works well w/exchange email; so, I have had to switch back to outlook. Now, how can I use outlook for mac's calendar and contacts with icloud?

Since uprgading to Mountain Lion, my mac mail no longer works with my exchange email properly. I finally gave up and moved back to outlook for mac, but now my new issue is using outlook calendar and contacts with icloud; possible?

Sorry but I'm really not to sure what I have. I'm not good with knowing my computer model. All I know is that its a MacBook running with Leopard. I got my computer last year so I suppose its fairly new. Is there a place on my computer where I can check to see what it is (sorry to be so dumb with my own mac)
And everything else works fine. I love Safari. It's just my mail that doesn't work. Here's the message that pop up several times.
"The MobileMe IMAP server “mail.mac.com” rejected the password for user “akcastaldo”
Please re-enter your password, or cancel."
The only problem here is, even though I enter my password it doesn't do anything. It makes that message go away for about 3-5 mins. After that it pops right back up. And I can't even go into my preference and change my email password. So I don't know what to do.

Can I edit the email created to send a PDF form back to me when a user clicks on Submit?

I created several PDF fillable forms for our users to request services and send back data needed to deliver those services. They are simple forms, and users will click on Submit to return to a mailto: address.
My question is about the email message that is auto-created when the user clicks on Submit. I can't find any config window to be able to edit the message in the body of the email. The message reads:
Form Returned: 2014PrintingRequestForm.pdf
The attached file is the filled-out form. Please open it to review the data.
Is there any way to edit this message?

majende,
Adobe Reader for iOS does support a Submit button.
(a) Button action to submit an entire PDF document via email
(b) JavaScript submitForm to Adobe FormsCentral
Do you use the desktop version of Adobe Acrobat to create a PDF form?
For option (a)
Add the "Submit a form" action to your Submit button.
Enter "mailto:" (including a colon) followed by email recipient(s). Please add a comma between two email addresses.
Example: [email protected], [email protected]
Select "PDF The complete document".
This particular type of PDF form will work with Adobe Reader desktop and mobile products (including Adobe Reader for iOS and Android).
In Adobe Reader for iOS, a user can do the following steps to submit the particular type of PDF form.
Fill out the PDF form.
Tap the Submit button in the PDF form.
Select "Share Original Document" or "Share Flattened Copy" from the Share File dialog.
Adobe Reader for iOS will automatically fill in the email address(es) that you specified when you created the PDF form.
Tap the Send button in the upper right corner.
Adobe Reader for iOS will send the PDF form as an email attachment via Apple Mail (the default mail app for iOS).
Please let us know if you have additional questions.

After updating to Firefox 3.6.9, when I click on a link in Outlook email, I get a message which says "General failure. The URL was: .... An error occurred in sending the command to the applicatio." and the link will not open. How can I fix this?

I updated Firefox yesterday to 3.6.9. When I receive a URL link in an email within Outlook, I cannot open the link in Firefox. As I said in the question, when I click on the link, a Microsoft Office Outlook error message appears which states that a General failure has occurred in sending the command to the application (which is Firefox). I am using Office 2007 This did not occur prior to the upgrade of Firefox.

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

How can I edit received emails in Apple's Mail app? Also, delayed sending of replies?

I finally switched to Apple's Mail app 4 months ago after 12 years of using Eudora (because of the inevitable - that Lion or Mountain Lion, when I upgrade, will not support the foundation architecture that Eudora is built on).
There are (AT LEAST) two functions available in Eudora that I very much want to do with Mail and currently cannot figure out how to do. I'm hoping that someone knows of a plugin that will do these functions, or will write such a plugin, or will tell me how to make this suggestion to Apple to include in a future update.
1) I want the freedom to EDIT a received message - to correct a subject line, or make it more relevant for my reference, or add a key word/prefix to the subject for future searching and archiving, along with being able to edit the message itself, so that it is the equivalent in a book (or an eBook) of adding comments/marginalia for future reference. (In my opinion, once I receive an email message, it is MINE - so I should be able to do what I want with it (which includes the responsibility of not rewriting a message to resend to appear as deceptive or fraudulent).
2) Write up a draft email, that would reside in the "Send" folder of Eudora, and for which I could select a time in the future that it should be mailed (dependent on the fact that Eudora would be running at that time, else it would send the next time Eudora was opened. I would LOVE to be able to do that in Apple Mail. Rationale: Often, when I receive an actionable email, I want to respond at that moment while the subject is fresh, but due to priorities or scheduling reasons, I don't want the response to go out just then. Maybe I want the response to go out after an event three days from now, but I want to process the message right now, and I don't want to have to remember to make a ToDo item to remind me in 3 days.

Thanks, a brody.
That tip takes me further down the field. And, I am able to do stuff like indent and change font color of my comments which is very helpful.
However, the big disappointment is that by dragging the original message to the Draft mailbox and then back to the original one after the edits is that it removes the original sender's name and puts mine in along with changing the heading info on date and time. That is, it creates a new message, rather than allowing me to modify the original one to suit my needs.
All the same, this was a very helpful tip. Thanks again.
Anyone know of a plugin?..............or two?....

Can't edit outlook email in HTML- whole message replaced with "undefined".

Similar Messages

Maybe you are looking for