Can't Enable Journaling
So, Im trying to Install windows Vista on my new Macbook pro, When I attempted to install it through bootcamp it said I need to "Enable Journaling" However when I open my Disc Utility I can't click on the option to enable journaling. Its unselectable.
Quick question, would enabling journaling cause me to loose data?
Hi nonfikshun,
1/ You should post what Mac you're using - will help with helping you...
2/ Windows 6 doesn't exist - you meant win 7?
3/ Did you just try to restart the computer? (and see if it might work) sometime it gets fixed by itself...
4/ Try to start from (Mac OS) install DVD, choose your language, go to Menu Bar (on top), find/choose 'Disk Utilities', choose Mac HD, 'Repair Disk', 'Repair disk Permissions'.
(You can also repair your windows partition with 'Disk Utilities' - I had done it MANY times {without any problems afterwards} - but it's NOT generally recomended).
Similar Messages
-
Enabling Journal approval in 11.5.10.2
Hi all,
We have to enable journal approval in Oracle General Ledger on 11.5.10.2 .Can anyone suggest the steps for implementing this process.
Regards,
Sushank VashishthaHi Mujeeb,
To enable Journal approval you need to do the following:
1)In your set of books journal approval should be enabled
2)Define employees(in GL ,in case you are using HRMS you need to define there) and their supervisors
3)Go to Journal Source form and check the box "requires approval"
4)In profile options set "Allow Preparer Approval" to yes
5)In profile options set "Find Approver method" to the appropriate value for your setup
6)Define Authorisation limit in your GL setup
Now Journal approval is ready to be used!!!
Regards,
Sushank -
Enabling Journals in a Model in SAP BPC 10.0 MS
Hi,
Where does one enable journals functionality in SAP BPC 10.0 MS?
Here's the background:
I created a new Environment from EnvironmentShell
Worked on dimensions, member sheets etc. in the Consolidation Model
In the SAP Web Administration, Consolidation Monitor, I get the error Initialization Failed when clicking on the Journal item in the TreeView on the left. Clicking on the See Details, I get the error JOURNAL_NOT_ENABLED.
In the Planning and Consolidation Administration Client, I get a similar error when clicking on Define Journal Validation Rules or Define Journal Translation Rules. (Journal in not enabled in Consolidation)
I then thought I would be clever and modified the column 'Journal' in the table dbo.tblApp by putting a '1' there.
Refreshing the Planning and Consolidation Administration Client, I see that for the Consolidation Model, the Journals are specified as 'in use'. However, returning to the SAP Web Administration and clicking on the Journal option, the error I now get is 'Invalid object name dbo.jrnAddedItems', probably because my backdoor hack circumvented some code.
Where does one enable journals in a Model on the MS 10.0 platform? For the life of me, I can't find it. This despite much searching. Clearly I am missing something obvious.
Kind Regards
NickHi Arnold,
Thanks. Yip, that's it. (I knew I was missing something remarkably obvious - it's just that I could not find it for some strange reason.)
Again, many thanks.
Kind Regards
Nick -
Help!
Welcome to Apple Support Communities
You just need to enable journaling.
To do it, open Disk Utility (in /Applications/Utilities) and choose your OS X partition (in most cases, "Macintosh HD") in the Disk Utility sidebar. Then, in the Disk Utility toolbar, you can find an option called "Enable journaling", so press it.
Finally, run the Mavericks installer again and follow the steps -
Trouble enabling journaling on volume
Hi
I'm trying to enable journaling on a volume, but get the following error :
An error occurred journaling the file system: The underlying task reported failure on exit (-69860)
What to do next ?
Best regards
Henrik SchackWhat I meant was is it the start up drive? If it is, that could be the problem. You may need to boot into another volume such as a clone, and use its Disk Utility to reset the journaling whilst it is not being the booted volume. But in case anything were to go wrong I would backup the volume first, in order to recover if some accident occurs.
You may also like to wait for a reply from someone more knowlegdable who can give you more definte guidance. -
Time Machine- Troubleshoot for enabling Journaling
Ok so I have a macbook pro and I have a 500 GB Lacie ext HD that I store everything on.
I just bought a new Western Digital 1TB that I wish use for backups with Time Machine.
I want to be able to back up everything from my mac HD and the lacie onto the 1TB with Time Machine.
Unfortunately when I go to Time Machine options it will not allow me to remove it from the "do not backup list" as it is grayed out.
From what I have found out, Time machine will only back up Mac OS Extended (Journaled)- is this true?
I realized disk utility says the Lacie is formatted as a MS-DOS (FAT32).
Therefore I verified the Lacie and went to select the enable journaling BUT it is grayed out.
Am I going to have to erase and re-format?
Can anyone shed any light on this?
ThanksTime Machine won't backup the data from that drive because it's not formatted correctly.
From item #2 in the FAQ at the top of the forum http://discussions.apple.com/thread.jspa?threadID=1964018
"Time Machine can back up from any internal or directly attached drive/partition formatted Mac OSX Extended. It will back-up your entire system (OSX, configuration, applications, user data, settings, preferences ... "the works," unless you specifically exclude things (see items 10 and 11 for info on exclusions). It also won't back up a disk/partition that contains TM backups.
In fact, by default, it will back up any such drive/partition (except the disk/partition where it's putting backups), unless you specifically exclude them."
Do you need to use the 500GB drive with a PC? That's the one that needs to be reformatted.
~Lyssa -
Enable journaling in yosemite through terminal
Hi there,
I have a Macbook Pro 2012.
Background: I was having problems with the system freezing up a few months ago. Then I got a grey apple logo at start up without being able to boot properly. I used my phone's internet to try to find a fix. One website said to try disabling journaling, so I did that through the terminal in the recovery thing. It worked, I was able to log in. I replaced my hard drive and ram to hopefully fix the problem. That worked as well, I've had no freezing problems (I'm not using Chrome out of fear that that contributed to the freezing).
Anyhow, I did a verify disk on my volume to make sure everything was ok, and it stopped and told me to do with through recovery thing. I noticed that instead of "journaled" being listed under volume info, it said "logical partition". So, it seems that journaling is still turned off.
Questions:
1. Is it a problem to have journaling off?
2. Should I turn it on? and if so, what is the command line to do it? (enable journaling icon is greyed out in disk utility)
3. Also when booting up, there is a status bar that takes about 90 seconds to finish to get into the desktop. Is this normal, or could it be related to lack of journaling? I don't appear to be experiencing any other problems.
Thanks in advance.I still have Mavericks on my work computer. This is the functionality I want to enable on Yosemite:
That way if I switch the from field I can also switch the SMTP server to match. I can not find anyway to make Yosemite pair the correct from address to the correct SMTP server, or a way to manually select the SMTP server (as was possible in Mavericks). -
All music gone, transferred to 'other', can't enable disk use on iTunes
it seems like there are a lot of people with similar problems but nothing exact..here goes:
-doing research on my macbook and i get a popup from itunes saying that my ipod was disconnected improperly (i didn't touch it and i wasn't even messing around on itunes)
-ipod restarts and reconnects with itunes and i get another pop up saying that "itunes cannot read the contents of the ipod. go to ipod summery and preferences and restore.
-i would just restore it and reload all the music butttttt like an idiot..i dont keep my music in my itunes cause it takes up way too much space and i never used any external hard drive or anything to back my music up (again..idiot..i know)
-so i read though a ton of forums and posts and see that im not the only one that this has happened to and everyone is saying to put it in disc mode, go to removable disk, copy all the music back to my macbook, restore my ipod, and put all the music back on. i also read something about clicking on my ipod icon on my desktop and going under ipod controls and changing some names (i dont konw if that was jsut for windows or what) but i also dont have an option of ipod controls
-the problem with that is that i can put my ipod into disk mode but that does me no good because i can't enable disk use on itunes because literally..my only option when i plug in my ipod is to restore it. under devices on the left hand menu, it just says ipod..not ipod with a bunch of sub categories like music and playlists and stuff..just ipod.
-normally..i would just give up and restore it but when i go to the about section on my actual ipod, it says that i have 50GB of "other" so that means that stuff is definitely still on it.
-so finally..my main question is:
is there ANY way to enable disk use on my iTunes without doing it through my iPod?..like i explained..when i plug my iPod in..that is not an option. and also..would i benefit from just bringing my laptop and ipod into an apple store and asking for help there or will that just be a waste of time?The library on the iPod will have been damaged - hence the reason it appears empty, but the media files are still there taking up space and reported as "Other". Check out this post from Zevoneer for some iPod recovery options.
http://discussions.apple.com/thread.jspa?messageID=6273675�
Some of the tools mentioned will require a working library, but I know from experience that you can use the manual recovey method when the library is missing or damaged. If you're struggling for space you probably need to go & buy an external drive before you start. Stick the iPod in disk mode. Hold Menu+Select > 6 seconds (resets iPod) followed immediately by hold Previous & Select > 6 seconds. You can now drag the contents of iPod_Control\Music to your new hard drive. You may need to reveal hidden files & folders. Once they are on your hard drive you can create a new empty library on the drive, then import the files you have reovered and consolidate the imported library so that the files are in a standard artist\album\## track structure rather that the iPod's obscured names.
tt2 -
How can I enable embedded pl/sql gateway to run on port 80
I have a new 11G install on OEL 4.0, database created. I would like to be
able to access the instance using the pl/sql gateway. Works fine with
port 8080, the default. How to I enable it to run on port 80?
I found this statement in the following docuementation:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
Using HTTP(S) on Nonstandard Ports
By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
rather than setuid ORACLE, and configure the port number in the Oracle XML DB
configuration file /xdbconfig.xml.I have root priviledges on the box.
I've tried setting the listener file permissions:
chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
Also put root in the dba group.
The permissions turn out like this:
-rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
I stopped the listener, bounced the database, and started the listener again.
But it still shows the process being owned by oracle:
oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
Changing the port is easy:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings
* can interfere with Web browsing.I can set the port. Just can't talk to it.
This is the entry from the listener log:
<msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='hostname'
host_addr='xxx.xxx.xxx.xxx'>
<txt>TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
</txt>
</msg>
So this looks like an permissions problem. But where? I posted
this on the apex forum here:
Re: How can I enable embedded pl/sql gateway to run on port 80
They suggested asking here.No, that thread did not provide the information that I need. Some more data:
I have the port set to 8080:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
I can set the port. Just can't talk to it. -
TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?
How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com -
Can I enable the root user account from the log in screen when I am locked out of the machine?
Hello everyone,
I am working on my friends mac to get it ready to sell. I went into the advanced options of the user and changed the name of the account. That's all I changed. I did read the warning that said if anything was changed it could cause damage, that's why I only changed the name of the user account. I didn't want to mess with anything else. Well, needless to say, I am locked out of the machine. Apparently the root user, system administrator, account was not enabled and I am stuck at the screen that I can get to with my installation disc. So how can I enable the root user account and get back onto the machine from the screen I am at? Can I enable the root user from terminal? I spent a good 8 hours yesterday researching this topic and have come up empty. Changing passwords from commands in terminal is not the problem. I am given just one account to choose from to log on and it's not accepting the password because of the changes I made in the advanced options menu.
Is there any hope of getting this thing going again? Or have I just screwed myself over?
Thanks for your help!
LeahYou can reset the password.
http://pondini.org/OSX/Password.html
Do you need to recover data from it before you sell it? If not you can just wipe the disk and prepare it for sale.
See > Apple What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Also See Thomas Reed's How to Prepare your Mac for sale
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
and this thread
https://discussions.apple.com/thread/5474062?tstart=0 -
I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?
iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications
-
Hi,
I downloaded Java from Java.com (free download) to be able to open a file I received as email attachment. After the download something happened to my laptop pc (Windows 7). I received pop up messages that said something like "Your computer got infected
you need to install Windows Defender 2015. And they started to pop up almost every second and also the screen view changed. It got upside down or windows messages moved and seemed to be multiplied, very unusual things kept going...
I stopped it and went online on my tablet pc and looked for what to do if my computer got infected with virus (because that's what I thought happened). From what I read online I made sure that all Microsoft windows experts were all recommending to start
my pc in safe mode and I found some instructions such as going to Task Manager and ending processes and also to clear some files and folders in Registry Editor. I wasn't able to clear files and folder in Registry Editor. To make short, I came to the conclusion
that I needed live help from a Microsoft expert. I chatted online with some MS Support Desk techs and followed their instructions but it didn't help at all. When I click on the little flag icon with a red cross sign on it(the one that says Open Action Center)
it says 1 important message-Turn on Windows Security Center service(Important) I tried to turn it on (I don't know how many times!) but I get the message "The Windows Security Center can't be started"
I went to Troubleshooting and clicked on Check of Performance issues (under System and Security) it did checking and I got the message "Problems Found- SuperFetch is not running. Not Fixed.
My question is: HOW CAN I GET SuperFetch running? or How can I enable SuperFetch?
Thank you.
Elif YILDIRIMHi Temur, ok. I do the above procedure and it worked fine
Now, I have other question?
How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
Subir al directorio superior.
Nombre Tamaño Última modificación
Sample Videos.lnk
1 KB
17/06/2011
06:25:00 a.m.
deployment
29/06/2010
04:14:00 a.m.
lost+found
25/02/2010
12:00:00 a.m.
video futbol en la playa.mp4
1390 KB
29/06/2010
01:08:00 a.m.
videofutbol.mp4
1390 KB
29/06/2010
01:38:00 a.m.
I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
I appreciate your early response.
Thanks -
How can you enable back the Android native Menu button in AIR 2.7?
I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?There is a work around and a reason for the menu issue. Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels. If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework. See below link for more info and work around.
http://forums.adobe.com/message/3964792#3964792 -
Can I enable Battery percentage on my iPod touch 4th generation running iOS 5.1.1 without beig jailbroken?
You can enable battery % on ipod touch 4g without jailbreaking it you can use backup bot for itunes. Thats how i enabled it on mine. Step 1: goto http://www.icopybot.com/ibackupbot_setup.exe download and install it if you have windows. Step 2: Next create a backup of your device in iTunes and then CLOSE iTunes (or else you may run into problems later on) do not lock the backup with a password. Step 3: Open iBackupBot. Click the backup you just made Next click "Path" to sort by Path. Step 4: Look for Library/Preferences/com.apple.springboard.plist and double click it. On the registration screen that comes up, hit cancel. Step 5: Find <dict> and create a new line after it. Then add this:
<key>SBShowBatteryLevel</key>
<true/>
Step 6: Hit CTRL + S or just the save button at the top left corner of that editor window. Now close the window.
Step 7: Right click that same backup you just edited
Step 8: click restore
Step 9: Done! If you don't see the changes, reboot your iPod.
Enjoy I hope you found this useful!
Maybe you are looking for
-
Autimatic trigger of packaging material in a sales order
Hi, I am trying to understand client SAP system.When I try to create a Sales Order with one line item (material type = FERT) the system automatically triggers a second line item (material type = VERP). If anybody has come across this kind of requirem
-
right now i have only 5 tabs open with information about firefox help firefox memory leak and so on just to try to see if i can find anything about why i have this memory leak and the memory leak is already up 1.3 Gb.
-
Repository Service not working
Hi all, I have designed a very simple repository service based on the several code samples here on the forums. Here is the received(IEvent) method i implemented: public void received(IEvent event) { IResourceEvent resEvent = (IResourceEvent) e
-
Where is the ConnectPool class?
I am using WSAD 4.0.3 and wanted to use the Microsoft JDBC driver. But when I try to set the WS server up with connection pooling I am at a loss as to what the com.microsoft.ETC is to the ConnectionPool class. What is it called and where is it? Thank
-
Can' get online with my desktop even though my computer shows it's connected to the super hub
My desktop is showing it is connected to the super hub, but it cannot go online. Each time I try to open a safari window, it shows me that I'm not connected to the internet. The hub has been changed by the provider and the signal strength is normal.