Can't get a group from web

Hi guys,
I need to check if current user is in a group:
SPGroup group = SPContext.Current.Web.Groups["docmanage"];
if (group.ContainsCurrentUser)
But in Web.Groups I have only few groups, not all of them.
I've created a group at a web where I use yhis code, but can't get it.
Am I missing something?

Here you go....the Complete code.
using(SPSite spSite= new SPSite("Site URL"))
using (SPWeb site
= spSite.OpenWeb()) 
      SPGroup managerGroup
= site.Groups["Group Name"]; 
      bool isManager
= site.IsCurrentUserMemberOfGroup(managerGroup); 
thanksArup MCTS - SharePoint
Play Sudoku

Similar Messages

  • Why I can't get the cookie from this web site when I can get it from google

    public static void main(String[] args) throws Exception {
    // I can get the cookie from "http://www.baidu.com"
    // String domain1 = "http://www.baidu.com/";
    // String domain2 = "www.baidu.com";
    // I can get the cookie from "http://www.google.com"
    // String domain1 = "http://www.google.com/";
    // String domain2 = "www.google.com";
    // I can not get the cookie from "http://www.csdn.net"
    String domain1 = "http://www.csdn.net/";
    String domain2 = "www.csdn.net";
    URL url = new URL(domain1);
    HttpURLConnection httpConn = (HttpURLConnection) url.openConnection();
    httpConn.setRequestProperty("User-Agent", "Internet Explorer");
    httpConn.setRequestProperty("Host", domain2);
    httpConn.connect();
    String cookie = httpConn.getHeaderField("Set-Cookie");
    System.out.println(cookie);
    My question is: How can I get the cookie from the web site:http://www.csdn.net?

    I found it in my computer , the location is: C:\Documents and Settings\zhijun\Cookies\zhijun@csdn[2].txt
    and there are many characters, they are:
    __utma
    17226283.1339458738.1221633513.1223535733.1223539291.58
    csdn.net/
    1600
    786595712
    30107528
    1029600608
    29960677
    __utmz
    17226283.1223539291.58.57.utmccn=(organic)|utmcsr=baidu|utmctr=VB.NET%B2%BB%C4%DC+%B6%CF%B5%E3|utmcmd=organic
    csdn.net/
    1600
    4189609856
    29997389
    1029910608
    29960677
    LastVisitedForum
    b7e466c6-291a-4072-acee-15d2be78c647*b5f1380c-f04c-4682-861a-54357b14186a*0a4a010e-8694-4139-b91f-a4ee1374981b*caa7532e-956b-4661-a53f-d46e3f1a8187*8b327318-2c42-4a49-8aed-ef8c33697e7f
    csdn.net/
    1536
    2105548800
    29964700
    960690608
    29960677
    userid
    2018946
    csdn.net/
    1536
    1900813440
    29963485
    771368976
    29960669
    __utmb
    17226283
    csdn.net/
    1600
    1849111424
    29960681
    1029760608
    29960677
    ABCDEF
    X1rZPCiZupWekhlTu78xWhr2Oj5GmFwk0J%252b8COfIv7IvVh2PgEPu2V7ooeZuUnene2j%252fDKJsNnZWYBSQxVkTfunvGq%252fDYuzFALM0ugLUmppZAHgfUWgQ%252bziPRLLJyFdzUpHwfG%252fReU8SfFy588HH02NPWPsO8RjgtHym%252bcJdUOnIH5J%252bkPEj%252b%252bZwlSPb5u0M0mPQRU1gOScfY4b981MifF4ksep8sZp1Ro2ofGHIg6l%252bgJ0P0XFASz2cJU8Objo%252f
    csdn.net/
    1536
    1900813440
    29963485
    770898976
    29960669
    QWERTOP
    6695
    csdn.net/
    1536
    1900813440
    29963485
    771058976
    29960669
    activeUserName
    boxiuzhen
    csdn.net/
    1536
    1900813440
    29963485
    771058976
    29960669
    UserName
    boxiuzhen
    csdn.net/
    1536
    1900813440
    29963485
    771058976
    29960669
    PName
    542a00960558bf1690fe08696d1245f407130025d59bd14ad6430f
    csdn.net/
    1536
    1900813440
    29963485
    771368976
    29960669
    Is this prove that the csdn web site which I  can not get the cookie is not using url-rewriting?

  • Get all groups from an AD Server

    Hi everyone,
    I'm trying to get all groups from and AD server.
    Here's how I'm doing it:
    DirContext ctx = new InitialDirContext( (Hashtable<String,String>) env);
              Name n2 = new CompositeName().add(groupsContainer);
              NamingEnumeration<Binding> contentsEnum = ctx.listBindings(n2);
              int i = 1;
              while ( contentsEnum.hasMore() && (i++) < 1000 )
                   Binding binding = contentsEnum.next();
                   groups.add(binding.getName().substring(3));
              return groups; The problem is, I always get an error if I don't restrict the results number to below 1000.
    The error is the following *javax.naming.SizeLimitExceededException: [LDAP: error code 4 - Sizelimit Exceeded];*
    After googling, I found it it's due to a field in the AD Server, that restrict the result number.
    So there is no way that I can obtain all groups without changing that field?
    Regards,
    Nuno.

    Hi Nuno,
    You have to increase the MaxPageSize value at ActiveDirectory level to retrieve results more than 1000. By default the MaxPageSize value is 1000. There is no option other than increasing the MaxPageSize value.
    Thanks & Regards,
    Murali.
    ============

  • How Can we get the data from Non-SAP to SAP in WebDynpro

    Hi,
    I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
    Help out with the steps for getting the data or procedure.
    Regards,
    Mutyapu

    You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
    Regards,
    Nithya

  • Can't get definitions factory from context in struts tiles in weblogic 10

    I have exception trace which only happens whenever i recompiling my java file while running my web application in weblogic 10
    javax.servlet.ServletException: javax.servlet.ServletException: javax.servlet.jsp.JspException: Can't get definitions factory from context.
    *     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:286)*
    *     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)*
    *     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)*
    Caused by: javax.servlet.jsp.JspException: Can't get definitions factory from context.
    *     at org.apache.struts.tiles.taglib.InsertTag.processDefinitionName(InsertTag.java:580)*
    *     at org.apache.struts.tiles.taglib.InsertTag.createTagHandler(InsertTag.java:479)*
    *     at org.apache.struts.tiles.taglib.InsertTag.doStartTag(InsertTag.java:441)*
    Anybody has any idea how to fix this?
    It seems the error happen because weblogic trying to reload the context after i recompiling java file
    How do i turn off / workaround on this?
    By the way i m using struts tiles
    Thanks

    I have exception trace which only happens whenever i recompiling my java file while running my web application in weblogic 10
    javax.servlet.ServletException: javax.servlet.ServletException: javax.servlet.jsp.JspException: Can't get definitions factory from context.
    *     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:286)*
    *     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)*
    *     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)*
    Caused by: javax.servlet.jsp.JspException: Can't get definitions factory from context.
    *     at org.apache.struts.tiles.taglib.InsertTag.processDefinitionName(InsertTag.java:580)*
    *     at org.apache.struts.tiles.taglib.InsertTag.createTagHandler(InsertTag.java:479)*
    *     at org.apache.struts.tiles.taglib.InsertTag.doStartTag(InsertTag.java:441)*
    Anybody has any idea how to fix this?
    It seems the error happen because weblogic trying to reload the context after i recompiling java file
    How do i turn off / workaround on this?
    By the way i m using struts tiles
    Thanks

  • How to get color group from illustrator into flash

    Hi,
    I have difficulties with the color management between Illustrator and Flash.
    I have the original vector files in Illustrator and would like to use the color groups, I have in Illustrator, also in Flash.
    One way doing it is using the Kuler.
    But I can not get the colors from Illustrator into Kuler.
    Can someone advice how to manage that process?
    Many thanks in advance!

    I'm fairly new to this having only recently started using these tools again after six years, but will try to help! Go to "Explore", find a theme you like and click the "Edit" selection when you mouse over it. From there you can edit it or save a copy of it as is as whatever name you wish. In Photoshop or Illustrator, they will now show up in Adobe Color Themes (Window > Extensions > Adobe Color Themes) under "All Themes" in the drop menu. In these apps (and others that are Adobe Color Theme aware), any themes that you favorite on the site will show up under "My Favorites".
    If you're using Fireworks, it's different as it still uses Kuler (Window > Extensions > Kuler).  Themes you save or favorite on the site don't automatically show up there, however you can search for themes by name, and if you select "Custom" from the theme group dropdown, you can enter up to four names that will show up in that dropdown menu and produce as many results as the window can hold for an individual term. For instance, I saved a theme as "Copy of Industrial Calm" which if I enter in the search box, the "group" is a group of one. However, if I just type "Industrial", the window fills with options, yet there are MANY more results on the Adobe Color site and you would have to be specific to get the right one in that window.
    Hope that helps.

  • WRT54GS v4 developed increasing lag, now it can't get an IP from the modem at all.

    I am connected wirelessly to my WRT54GS v4 over WPA2, and it's worked very well for years. About 2 days ago, the router started developing serious lag. Some web pages (CNN, Google, etc) would time out only to work OK 10 seconds later (or not.) A traceroute to the offending domain would show my second hop as timing out, with all other hops < 80ms. Sometimes I'd get 3 webpages (all on different sites) hanging at the same time, only to finally display 20 seconds later simultaneously.
    That was all on firmware 1.06.1. I just upgraded successfully to 1.06.3, with absolutely no change. I held reset for more than 30 seconds with no change.
    The router looks like it can't get an IP from the modem at all. Clicking the DHCP Renew button in the web interface just bounces back to the same page but doesn't show that it's picked up a valid IP address.
    If I plug into my cable modem directly from my laptop, the connection is awesomely fast with zero hangs or hesitation.
    Can *anyone* help me please?

    I was able to fix my problem by following alllll the instructions on this page: http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4572&p_created=11658...
    I also remembered that I had been resetting my cable modem (by power-cycling it) once or twice a day because it was losing its signal. I wonder if that was part of the problem?

  • I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?

    I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?

    Welcome to the Apple Support Communities
    If I have understood you properly, to do that, you have to create a new administrator user with your name and for your uses. Follow these steps:
    1. Open System Preferences > Users & Groups, and press the + button to create a new administrator account.
    2. When you have finished creating that user, open  > Log Out, and log in your new user.
    3. Open System Preferences > Users & Groups, select the old user and press the - button to remove the user. If you want, you can select the option to remove the Home folder of this user, so you will only have the Home folder for your account

  • Sharepoint 2010 get User Groups from specific site

    Hello,
    I was able to get all User groups from entire site Collection.
    But instead of getting user groups from entire site, I want read user groups only from one specified sub site.
    Please help!
    Thanks

    Assuming you have an SPWeb object named "web", example:
    SPSite site = new SPSite(http://yourdomain/sites/yoursite);
    SPWeb web = site.OpenWeb("mysubsite/subsbusite");
    web.Groups will return a collection of SPGroup objects for the current subsite. If this subsite inherits permissions from a parent site (web.HasUniquePerm = False), the list is the same as the Groups property of the parent site.
    SPWeb.Groups:
    http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spweb.groups(v=office.15).aspx
    SPGroup:
    http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spgroup(v=office.15).aspx
    You would be better results by posting coding questions in "SharePoint 2010 - Development and Programming" instead of "SharePoint 2010 - General Discussions and Questions".
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • How can i get all values from jtable with out selecting?

    i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
    Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
    thanks in advance.
    raja

    You could set the table's data model to be the same:
    output2.setModel( output1.getModel() );

  • How can i get thes songs from ipod nano to the itunes libary??

    hi
    i have ipod nano and i sync it with over 500 songs .....my bad i lose all that songs on my libary  .... how can i get thes songs from ipod nano to the itunes libary??

    See this older post from another forum member Zevoneer on different ways to copy content from your iPod to your computer.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Can you get values back from a stored procedure via OUTPUT parameters?

    Can you get values back from calling a stored procedure via OUTPUT parameters/variables? I call the SP via a SQL statement from a script either in a WF or DF.
    I thought I read some reference that DI could not get the values from OUTPUT parameters but I could not find it again (don't know if it is in any of the documentation or referred to in a forum.
    I did try a couple of tests but it did not reutrn any values via OUTPUT. But before I give up I thought I'd see if you could and maybe I needed to change something.

    This isn't exactly an answer to your question, but I'll point out that, given that you're resorting to a SQL script in the first place, there's no reason you can't also turn the output parameters into a regular result or record set. (The following uses T-SQL, although I think it's pretty generic.)
    declare @param1 int, param2 varchar(100), @return int;
    exec @return = proc @param1 = @param1 output, @param2 = @param2 output;
    select @param1 as param1, @param2 as param2;
    That is, to get from output parameters to a "regular" output from the SQL script isn't much of a leap...
    Jeff Prenevost
    BI Consultant
    Ann Arbor, MI

  • Can viewObject get a parameter from sessionScope to binding variable?

    hello,
    using Jdev11g ADF Fusion application
    Can viewObject get a parameter from sessionScope and assign into binding variable ? without using executeWithParameter
    Thanks
    greenApple

    A. Safwat,
    As I said before, I was not trying to be offensive, but simply to explain some of the shortcomings of one solution over another. One of the reasons people give such short answers is that many questions (including this one) have been asked and answered many many many times before on the forum. As to my reasons:
    1). Overkill - overkill because you are writing code to do what the framework already provides for you.
    2). Not bind-variable friendly - you are gluing in literals into a SQL statement. That means that Oracle will have to hard parse the query for each new value of the filter clause, yielding to poor performance, particularly in a multiuser environment. It should ideally be done using bind variables.
    3). Insecure (think about what happens if you put "'xyz' or 1=1" into the filterValue there) - not using bind variables is a security hole. Think through what happens if a filter criteria comes through like the one I mentioned.
    4). Inflexible - because you are overriding executeQueryForCollection, this VO becomes inflexible and can only be used in this particular place. Using the declarative approach outlined by Timo is more flexible
    5). Bad (ok, that's my opinion there) - OK, perhaps this was a bit offensive ;)
    Please don't take a critique of a post as offensive, as I assure you it was not intended to be in that spirit. As I mentioned, I greatly appreciate when people point out issues/problems/etc with my ideas, as that is the best way for me to learn. I have in the past written applications that were not bind-variable friendly, and I learned the downsides the hard way (system was horribly non-performant) - I wish someone had reviewed my approach and told me "bad idea" before the application made it into production.
    Respectfully,
    John

  • How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system.  Not enough memory to upgrade.

    How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system.  Not enough memory to upgrade.

    You can't.  iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and  The following is from this Apple document: iCloud: Backup and restore overview.
    iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
    What is backed up
    You get unlimited free storage for:
    Purchased music, movies, TV shows, apps, and books
    Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
    Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
    You get 5 GB of free iCloud storage for:
    Photos and videos in the Camera Roll
    Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    Visual Voicemails
    But not from a Mac.  If you want to backup your photos and other important files I suggest you get an external hard drive and use  it with Time Machine.
    OT

  • How can I get all photos from the camera roll onto the photo stream so they will share between iphone and ipad?

    How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?

    When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
    For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer.

Maybe you are looking for