Can't get ipv6 address assigned correctly.

I use NetworkManager and dhclient for auto-configuration but it has some weird problems.
When I boot up my laptop, I only have chance to get access to ipv6 network, when I fail, I tried to delete the connection in Network Management Settings, and then added a new profile, disable and then enable the network again. Sometimes it works well, but sometimes it failed to auto-config.
If I use the command:
$ ip -6 rout
then I'll get the following message:
unreachable fe80::/64 dev lo proto kernel metric 256 error -101
fe80::/64 dev wlan0 proto kernel metric 256
default via fe80::2e0:2ff:fe54:59 dev wlan0 proto static metric 1
every time the default gateway is configured well, sometimes the address the address is missed , and if I do the following:
$ ping6 -I wlan0 -c 4 fe80::2e0:2ff:fe54:59
It responses normally.
PING fe80::2e0:2ff:fe54:59(fe80::2e0:2ff:fe54:59) from fe80::1034:56ff:fe78:9124 wlan0: 56 data bytes
64 bytes from fe80::2e0:2ff:fe54:59: icmp_seq=1 ttl=64 time=5.32 ms
64 bytes from fe80::2e0:2ff:fe54:59: icmp_seq=2 ttl=64 time=6.64 ms
64 bytes from fe80::2e0:2ff:fe54:59: icmp_seq=3 ttl=64 time=10.6 ms
64 bytes from fe80::2e0:2ff:fe54:59: icmp_seq=4 ttl=64 time=3.60 ms
--- fe80::2e0:2ff:fe54:59 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 3.603/6.546/10.617/2.587 ms
do the following:
$ ip -6 addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 2001:250:4400:d000::161/128 scope global
valid_lft forever preferred_lft forever
inet6 fe80::1034:56ff:fe78:9124/64 scope link
valid_lft forever preferred_lft forever
I found I just sometimes can get the ipv6 address start with 2001:
If the address is assigned, then:
$ ping6 ipv6.google.com
PING ipv6.google.com(ipv6.google.com) 56 data bytes
^C
--- ipv6.google.com ping statistics ---
11 packets transmitted, 0 received, 100% packet loss, time 10008ms
response nothing!
Then I switch into Windows 7, if something like above happened, then I managed to set the MAC address to a random value such as 12-34-56-78-91-23, soon, the problem will be corrected, I'll get a new ipv6 address assigned by DHCPv6 server. If I switch back to arch, set the MAC address in NetworkManager, it didn't have function at most time, and the ipv6 address even won't change!
Can anyone help me with this problem?
by the way, I never get ipv6 address when I use dhcpcd.

bernarcher wrote:
Hello and welcome to the forums heliumhgy.
Just in case you are wondering where your post has been gone: The moderators board received this message from you:
I dont need tunnel to access to ipv6, My univ use dual-stack to get both ipv4 and v6 work around all campus.
This is because you inadvertently used the "Report" link. But don't worry this happens rather often.
Just cause I caught the glimpse of re-blabla, and mistaken it as reply
Last edited by heliumhgy (2012-11-29 03:16:11)

Similar Messages

AP not getting ip address assigned.

Hi all,
I have a problem with my AIR-AP1041N-E-K9, i do not seem to get an ip-address assigned after a reset to factory defaults.
I do see the AP with CDP:
Device-ID: ap
Advertisement version: 2
Platform: cisco AIR-AP1041N-E-K9
Capabilities: TransBridge IGMP
Interface: gi5, Port ID (outgoing port): GigabitEthernet0
Holdtime: 163
Version: Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright
Duplex: full
Power drawn: 15000 milliwatts
SysObjectID: 0.0
Addresses:
unknown addres
So that should mean that layer 2 connectivity is fine.
I have the AP connected to a cisco SG300 switch,and assigned switchport trunk allowed vlan's: 1,3,4,8.
Can someone help me?
Regards,
Menno
Message was edited by: Menno Hogenbirk
I also noticed that when i connect to the AP via console-cable, i can see the AP boot up in the console session, but then i do not get a login prompt, but it seems like the AP is responding; if i shutdown the interconnecting link between the switch and the AP, i do see log messages appearing in the console-connection.
I have tried to debug on the Switch, but i need a password, so i can debug, which i do not have.,

Hi, thanks for your reply,
I'm should be getting my ip via DHCP(as i believed that this is the way that the AP searches for an ip, when it has no config yet). The DHCP-server is configured on a cisco 871 router that is connected to the switch, as i found no option to configure it on my switch, which is in layer 3 mode. The DHCP-pool is assigned to the vlan(native) 1 address-range(in this case 192.168.0.x/24). I also have configured a range for my workstations, and here i do get Ip-addresses assigned.
The AP does not connect to a Wireless controller. Also i have checked my inter-vlan routing on my switch, and i have connectivity to all vlans, so i believe my AP should have connectivity to the DHCP-server configured on the router.
Ping-test from switch shows no issues:
Swouter#ping 192.168.0.1
Pinging 192.168.0.1 with 18 bytes of data:
18 bytes from 192.168.0.1: icmp_seq=1. time=0 ms
18 bytes from 192.168.0.1: icmp_seq=2. time=0 ms
18 bytes from 192.168.0.1: icmp_seq=3. time=0 ms
18 bytes from 192.168.0.1: icmp_seq=4. time=0 ms
----192.168.0.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
Message was edited by: Menno Hogenbirk
Problem has been resolved.

My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

I use my iPad to get the address book backed up by iCloud from my iPhone. However, I cannot see the recent new contacts from my iPad. Is there anyway to check the iCloud server to see if my address book backup from my iPhone is still there?

I got my Macbook Air from a family member and I can't get my address book on my computer. What do I do to get the address book on it?

I purchased an Air Mac and can't get the address book on it. Does anyone have any ideas on what I should do. I have an IPhone and an IPad and they both have clouds but I don't see one on my Air Mac.

From the link posted in TD's reply
To unhide your purchases
Open the Mac App Store.
Choose Store > Sign In, then enter your Apple ID and password.
Choose Store > View My Account.
Click on View Hidden Purchases from the Account Information page.
From the Hidden Purchases page, locate the app you would like to unhide.
Click the Unhide button.
LN

How can I get the address book to sort by "Last" name (using v 31.3.0).

After a computer crash, I had to load Thunderbird (v31.3.0) back into my machine running Windows 8.1, and I successfully imported my address book back up file into Thunderbird (v31.3.0).
My problem is that I don't see an option to sort the address book by "Last" name, which was available with the version of Thunderbird I had before the crash.
How can I get the address book to sort by "Last" name?

In 'Address Book'
Select address book
'View' > 'Show name as' > 'Last/First'
The you can sort by Name.
Either click on 'Name' column header to change sort order,
If reversed, then click on 'Name' column header again to reverse the order.
Or
'View' > 'Sort By' > choose 'Name' and 'Ascending'

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Music in itunes from different cd's, how can i get it to have correct info?

1. I have over 2000 songs in itunes from different mixed cd's, how can I get them to have correct artist and album and titles?
2. How can I convert them all to mp3 because I have to be able to send them to windows media player because I have mp3 players that I would like to play these on along with my ipod?

I personally use TuneUp from http://www.tuneupmedia.com/
It works on both Mac and PC.
It is a great tool for correcting MetaData "Music Info" for all of your songs. It also adds the correct album artwork and can remove duplicate songs from your library easily.
iTunes on PC will convert the WMA to MP3 for you if you like. To do so just right click on your WMA files in iTunes and choose convert to MP3.
If you have already moved all of your music to Mac and no longer have a windows machine there are a couple of programs that will do it for you from Mac OS X. Some are free and some cost money. Let me know if you would like to know a couple of examples.

How can i get vendor address

how can i get vendor address from lfa1 table.
plz help me

data: begin of itab occurs 0,
      adrnr like lfa1-adrnr,
      ADDRNUMBER like adrc-ADDRNUMBER,
      name1 like adrc-name1,
      name2 like adrc-name2,
      house_num1 like adrc-house_num1,
      street like adrc-street,
      city1 like adrc-city1,
      end of itab.
select yadrnr xADDRNUMBER xname1 xname2 xhouse_num1 xstreet
xcity1 from adrc as x inner join lfa1 as y on xADDRNUMBER = y~adrnr
into table itab.

Can't get Landscape printing aligned correctly...

I'm new to Java and this forum, so any help with the following would be greatly appreciated:
Description: Incorrect height alignment when printing Landscape.
Hardware: Power Macintosh 8500/120, 48MB RAM.
Brother HL-1650 Laser Printer, 8MB RAM.
Software: Mac OS 8.6.
MRJ2.2 (JDK1.1.8), MRJSDK2.2, JFC/Swing1.1.1.
Procedure: 1) Compile BorderDemo.java (see source code below) with javac.
2) Run BorderDemo with JBindery.
3) Select "Landscape" printing, then select "Print".
Results: Incorrect alignment of GridLayout within BorderLayout's Center position.
The first printed row is incorrect. It is split with 6/8ths in row1, and 2/8ths
in the last row.
Expected: The BorderLayout's Center position should print 6 rows and 7 columns of
8 x 1 TextEdit field items (This is supposed to be a calendar). It should fill
the 8.5 x 11 piece of paper in Landscape print mode.
Note: It correctly displays on the computer monitor.
I've tried lots of combinations of GridLayout, BorderLayout, and BoxLayout, but
I can't get it to print correctly in Landscape. Any help would be greatly appreciated!
Compile and run the following code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class BorderDemo {
static JFrame frame1 = new JFrame( "BorderDemo");
static JPanel panel1 = new JPanel();
static JPanel panel2 = new JPanel();
static Label R0_1L1, R0_1L2, R0_1L3, R0_1L4, R0_1L5, R0_1L6, R0_1L7,
R0_2L1, R0_2L2, R0_2L3, R0_2L4, R0_2L5, R0_2L6, R0_2L7;
static DayPane R1C1, R1C2, R1C3, R1C4, R1C5, R1C6, R1C7,
R2C1, R2C2, R2C3, R2C4, R2C5, R2C6, R2C7,
R3C1, R3C2, R3C3, R3C4, R3C5, R3C6, R3C7,
R4C1, R4C2, R4C3, R4C4, R4C5, R4C6, R4C7,
R5C1, R5C2, R5C3, R5C4, R5C5, R5C6, R5C7,
R6C1, R6C2, R6C3, R6C4, R6C5, R6C6, R6C7;
public static void setupframe1() {
// Setup and fill frame1.
frame1.setSize( 760, 590);
frame1.setVisible( true);
frame1.getContentPane().setLayout( new BorderLayout() );
// Setup and fill panel1.
panel1.setLayout( new GridLayout( 2, 7, 0, 0) );
panel1.setPreferredSize( new Dimension( 730, 24) ); // bind this height
panel1.setFont( new Font( "Times", Font.PLAIN, 10) );
panel1.setBackground( Color.white);
R0_1L1 = new Label( "CurrentMonth");
R0_1L2 = new Label( "CurrentYear");
R0_1L3 = new Label( "");
R0_1L4 = new Label( "");
R0_1L5 = new Label( "");
R0_1L6 = new Label( "");
R0_1L7 = new Label( "");
R0_2L1 = new Label( "Sunday", Label.CENTER);
R0_2L2 = new Label( "Monday", Label.CENTER);
R0_2L3 = new Label( "Tuesday", Label.CENTER);
R0_2L4 = new Label( "Wednesday", Label.CENTER);
R0_2L5 = new Label( "Thursday", Label.CENTER);
R0_2L6 = new Label( "Friday", Label.CENTER);
R0_2L7 = new Label( "Saturday", Label.CENTER);
panel1.add( R0_1L1);
panel1.add( R0_1L2);
panel1.add( R0_1L3);
panel1.add( R0_1L4);
panel1.add( R0_1L5);
panel1.add( R0_1L6);
panel1.add( R0_1L7);
panel1.add( R0_2L1);
panel1.add( R0_2L2);
panel1.add( R0_2L3);
panel1.add( R0_2L4);
panel1.add( R0_2L5);
panel1.add( R0_2L6);
panel1.add( R0_2L7);
// Setup and fill panel2.
panel2.setLayout( new GridLayout( 6, 7, 0, 0) );
panel2.setPreferredSize( new Dimension( 690, 544) ); // height not bound
panel2.setBackground( Color.black);
R1C1 = new DayPane( );
R1C2 = new DayPane( );
R1C3 = new DayPane( );
R1C4 = new DayPane( );
R1C5 = new DayPane( );
R1C6 = new DayPane( );
R1C7 = new DayPane( );
R2C1 = new DayPane( );
R2C2 = new DayPane( );
R2C3 = new DayPane( );
R2C4 = new DayPane( );
R2C5 = new DayPane( );
R2C6 = new DayPane( );
R2C7 = new DayPane( );
R3C1 = new DayPane( );
R3C2 = new DayPane( );
R3C3 = new DayPane( );
R3C4 = new DayPane( );
R3C5 = new DayPane( );
R3C6 = new DayPane( );
R3C7 = new DayPane( );
R4C1 = new DayPane( );
R4C2 = new DayPane( );
R4C3 = new DayPane( );
R4C4 = new DayPane( );
R4C5 = new DayPane( );
R4C6 = new DayPane( );
R4C7 = new DayPane( );
R5C1 = new DayPane( );
R5C2 = new DayPane( );
R5C3 = new DayPane( );
R5C4 = new DayPane( );
R5C5 = new DayPane( );
R5C6 = new DayPane( );
R5C7 = new DayPane( );
R6C1 = new DayPane( );
R6C2 = new DayPane( );
R6C3 = new DayPane( );
R6C4 = new DayPane( );
R6C5 = new DayPane( );
R6C6 = new DayPane( );
R6C7 = new DayPane( );
panel2.add( R1C1);
panel2.add( R1C2);
panel2.add( R1C3);
panel2.add( R1C4);
panel2.add( R1C5);
panel2.add( R1C6);
panel2.add( R1C7);
panel2.add( R2C1);
panel2.add( R2C2);
panel2.add( R2C3);
panel2.add( R2C4);
panel2.add( R2C5);
panel2.add( R2C6);
panel2.add( R2C7);
panel2.add( R3C1);
panel2.add( R3C2);
panel2.add( R3C3);
panel2.add( R3C4);
panel2.add( R3C5);
panel2.add( R3C6);
panel2.add( R3C7);
panel2.add( R4C1);
panel2.add( R4C2);
panel2.add( R4C3);
panel2.add( R4C4);
panel2.add( R4C5);
panel2.add( R4C6);
panel2.add( R4C7);
panel2.add( R5C1);
panel2.add( R5C2);
panel2.add( R5C3);
panel2.add( R5C4);
panel2.add( R5C5);
panel2.add( R5C6);
panel2.add( R5C7);
panel2.add( R6C1);
panel2.add( R6C2);
panel2.add( R6C3);
panel2.add( R6C4);
panel2.add( R6C5);
panel2.add( R6C6);
panel2.add( R6C7);
WindowListener l = new WindowAdapter() {
public void windowClosing( WindowEvent e) {
System.exit( 0);
frame1.addWindowListener( l);
public static void main( String[] args) throws Exception {
setupframe1();
Container f1 = frame1.getContentPane();
f1.add( "North", panel1 ); // bind height
f1.add( "Center", panel2 ); // no binding
frame1.show();
Thread.sleep( 5000);
frame1.repaint();
Thread.sleep( 5000);
PrintJob pjob = frame1.getToolkit().getPrintJob( frame1, "Printing BorderDemo", null );
if( pjob != null) {
Graphics pg = pjob.getGraphics();
if( pg != null) {
frame1.printAll( pg);
pg.dispose(); // flush page
pjob.end();
class DayPane extends JPanel implements ActionListener, FocusListener {
JTextField tfield1, tfield2, tfield3, tfield4, tfield5, tfield6, tfield7, tfield8;
DayPane( ) {
setLayout( new GridLayout( 8, 1, 0, 0) );
tfield1 = new JTextField( );
tfield2 = new JTextField( );
tfield3 = new JTextField( );
tfield4 = new JTextField( );
tfield5 = new JTextField( );
tfield6 = new JTextField( );
tfield7 = new JTextField( );
tfield8 = new JTextField( );
add( tfield1);
add( tfield2);
add( tfield3);
add( tfield4);
add( tfield5);
add( tfield6);
add( tfield7);
add( tfield8);
public void actionPerformed( ActionEvent evt) {
if ( evt.getSource() instanceof JTextField)
; //removethis.
// frame.update( this);
public void focusLost( FocusEvent evt) {
; //removethis.
// frame.update( this);
public void focusGained( FocusEvent evt) { }

Force the landscape.
Check it out:
pf.setOrientation(PageFormat.LANDSCAPE);
{pf ~ PageFormat}
B@ron {EU.BELGIUM}

I can, I can't get my address book to snyc with my ipad2. I'm using Outlook express 2004. I followe the steps in itunes, but still no contacts. Any suggestions?

Can't get my address book to sync to IPAD2. Using Outlook Express 2004. I followed the steps in Itunes, but still not contacts. Any suggestions?

Mine is doing the exact same thing, and nobody on any of these threads has had any luck fixing it yet, so far as I can tell. iSync is worthless since it simply won't see the ipod and basically is not used at all now as .mac is done through its own preference window. What did work for me, and was quite easily done, was to just open your ipod through the finder and delete the vcard data in the contacts folder. Export your contacts from address book as a vcard to that contacts folder on your ipod, and it all works fine.
Still won't sync...but at least this only takes a minute to do. I'd like to actually fix it though.

Can't get albums/songs in correct order!!! (11.1.3)

I can't get songs and albums to order correctly on my iPod. All but one album has the correct song order on iTunes on my laptop and they are all ordered by artist/year on iTunes, I can't get that ordering method to transfer to the iPod. And on half the albums on the iPod the songs are out of order and/or the albums are out of chronological order.
So I had been using some outdated version of iTunes on my old computer for some time, and with that version and my 4th gen Nano I was able to get my albums arranged by year like I like them.
I bought a new computer (old one still works) and had my iPod stolen about the same time so I had a new computer and was forced to resort to a secondhand 3rd gen Nano, using iTunes 11.1.3, completely unfamiliar to me. Some of the stuff I own isn't off iTunes and that's what I'm having the biggest problem with.
I had the issue of two songs being in the wrong place on one album. The track numbers were appropriate, everything else in the "get info" field was identical to the rest of the album. Frustrated, I once again copied my library from my old computer to my new one. This was a huge mistake.
In an attempt to get everything back the way it was I started messing with the iPod settings in iTunes, checking boxes like "manually manage songs" without having a clue what they did. I tried "converting higher bit songs to 192kbps" due to this old turd not being able to hold all my music otherwise. This helped none.
At least half of my albums were now out of chronological order, some of them were split into 2 albums, (one album would claim to only have one song. It had all 12 or so songs from that album but they were out of order.) Some had all the songs in order but were chronologically incorrect. (2002 album appearing before 1997 album) and some (like the one I got off a CD) are impossible to order correctly. I manually filled out every. single. field. in the "properties" section. The track listing still goes like 2,3,4,5,1,10,7,8,9 or something like that. It is just infuriating.
I have just had it. I've tried everything I can think of, I've scowered the internet and can't find anything helpful.
I'm at the point right now where I think it would be easier to just buy 50 CDs and use those to listen to in my car rather than have to deal with Satan's idea of user-friendliness. Any help is greatly appreciated, I've just had it.

Cal Burke wrote:
This is a programming error, obviously - to me. Is someone addressing that issue? Anybody?
What behaviour exactly do you consider to be a programming error? If repeatable and clearly not an intended design choice then a bug report might be in order. If it works as designed but you think it should work differently then feedback would be the way to go. Either way nobody is likely to address an issue that isn't brought to their attention.
I am unable to put the songs of a playlist I created in the order I want. iTunes 11.1.3 has been on my machine since September of last year and this issue began today. I'd lke to believe it's the result of something I have done, but the world is full of things I would like to believe that are not.
"View Options" was set to 'manual' and songs would snap back when I attempted to move them, so - as that was the only preference I could find that applied - I changed it to "Artist Name" and back to manual. Now they don't budge when I attempt to move them.
Ah, when viewing a playlist use the List view and select the heading of the left-most column of numbers. This is the Play Order column. You can drag tracks up and down the list. If you sort on some other column and would like to use this as an initial order which you can then modify, right-click on the playlist name and click Copy to Play Order then select the play order column. Note the triangle should be pointing upwards otherwise the list will play in reverse on your device.
tt2
Message was edited by: turingtest2

WRT320N Can't get IP Address - only using 1 wired port - no internet access - web setup pages hang

Just bought Linksys WRT320N to replace Netgear MR814.
Can't get connected to internet using Linksys WRT320N.
Setup:
ISP: Cox Communications (Cable)
Firmware: v1.0.03 build 010 Jul 24, 2009
1 wired - port 1- to Windows XP SP 3 Dell Desktop
Setup Attempts:
1. Tried to setup using install CD. Kept erroring out with Error 302: Internal Error. tried this 3 times
2. Went through the reset, power down, power up procedures.
3. Ping 192.168.1.1 = success
4. Connected to 192.168.1.1 via web browser
5. Set MAC Address = computer's MAC address
6. Set MTU = Auto (1500). Also tried Manual 1492
Was unable to get IP address using IP Address Release and IP Address Renew. Internet IP Address still = 0.0.0.0
Note that the web page will always get stuck after perfoming a couple of actions (like after switching between tabs). Message in bottom of browser is "Wating for http://192.168.1.1/Status_Router.asp". And on the screen the hourglass symbol never goes away.
Note that the old Netgear router still works fine and I am currently connected to the internet using the Netgear router. I'd appreciate any help getting the new Linksys router functioning/connecting to the internet/obtaining and IP address.
Thanks for your help.
Solved!
Go to Solution.

I don't know where I was unclear: you wrote before that you have used the mac address clone function on the WRT to clone the MAC address of the PC. This way the WRT "pretends" to be the PC if you connect the WRT internet port to your modem.
However, the PC is not the device which you used before to connect to the internet. The PC was not the device which was connected before to the modem. If you connect the PC directly to your modem it won't get an IP address either. It won't have internet.
The problem is that your ISP only allows you to have a single active internet connection at any given time. If you simply connect a different device with a different MAC address to your modem this other device won't get an IP address. As you have connected the Netgear router to your modem and you have internet then you have to clone the MAC address of your Netgear router. That's the device which is connected to your internet and that's the MAC address for which your ISP has locked your internet connection.
Thus, one more time: clone the MAC address of the netgear router (the internet or WAN port MAC address) on your Linksys router. Then the Linksys pretends to be the Netgear router and your ISP should accept the Linksys router. The netgear router should have a status page in it's web interface which shows you the correct MAC address to be cloned.

Can't get ipv6 connectivity outside LAN

Hi there,
a new arch system has been set up by me and now I try to get IPv6 working. Sixxs is my tunnel provider and it did work on my previous (Ubuntu 10.04) system. So in general it should be possible :-). I installed the aiccu package from the AUR and if I do "aiccu start" it gets all the correct tunnel data. Testing things with "aiccu test" shows that everything, but outbound connections, works. I can ping myself, but test 6 (Ping the IPv6 Remote/PoP Inner Tunnel Endpoint), 7 (Traceroute6 to the central SixXS machine) and 8 (Traceroute6 to (www.kame.net)) fail. Test 6 gives the following hint:
### If the previous test was succesful then this could be both
### a firewalling and a routing/interface problem
It seems that the sixxs interface is configured correctlyt, ifconfig shows (the *'s are replacements by me):
sixxs Link encap:UNSPEC HWaddr C0-A8-02-56-00-00-00-00-00-00-00-00-00-00-00-00
inet6 addr: fe80::c0a8:256/64 Scope:Link
inet6 addr: 2001:6f8:***:***::2/64 Scope:Global
UP POINTOPOINT RUNNING NOARP MTU:1280 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Unfortunately, there is not much experience with ip tables, but this is the output from "route":
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 * 255.255.255.0 U 0 0 0 eth0
default arcor.easybox 0.0.0.0 UG 0 0 0 eth0
And this is the output from "ip -f inet6 route show":
2001:6f8:***:***::/64 via :: dev sixxs proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0
fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0
fe80::/64 via :: dev sixxs proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0
default via 2001:6f8:***:***::1 dev sixxs metric 1024 mtu 1280 advmss 1220 hoplimit 0
The configuration from /etc/aiccu.conf is tha following:
username ****
password ****
protocol tic
server tic.sixxs.net
ipv6_interface sixxs
tunnel_id ****
verbose true
daemonize true
automatic true
requiretls false
pidfile /var/run/aiccu.pid
defaultroute true
makebeats true
behindnat true
I am behind a NAT which connects me to the internet. Do you have any hints where to look else? Should it work by default or am I missing some settings?
Furthermore I need to use the teredo protocol with meredo, but this is likely another issue (as running meredo does not affect the general ipv6 situation with aiccu for me).
Edit: After executing
ip route add ::/0 dev sixxs
I could get sometimes a connection. For a ping6 the best was about 50% package loss. I found this on the wiki pake for manual 6in4 tunnels. So it seems that it actually has something to do with routing and which routes are created by the aiccu -- so this is not yet resolved.
Thanks in advance, regards,
Tom
Last edited by mind_the_gap (2010-12-13 22:34:14)

Thanks for posting your conig, smayer. Unfortunately I got the same result as before
--- 2001:6f8:***:***::1 ping statistics ---
3 packets transmitted, 1 received, 66% packet loss, time 2008ms
rtt min/avg/max/mdev = 29.139/29.139/29.139/0.000 ms
Some packet get through -- strange. My router is probably alright, since it did work on Ubuntu two weeks ago.
I tried the same config with an ArchLinux on my notebook. It is connected via wlan to the same router. There happens exactly the same -- packet loss. Well, either my router is not working correcly for about two weeks now or my arch setups have both some problems. I'll try this on another machine.
Edit: I tried it on another machine in this LAN -- Ubuntu 10.10. The same result there -- so it is probably not arch or my configuration. I'll exchange the router and see what happens.
Edit: It seems to work now. After I have disable intrusion detection and firewalls on my router (I'll fine tune that) the packet loss is gone. So sorry for the spam here :-)
Last edited by mind_the_gap (2010-12-16 00:21:01)

How can i get my addresses from my old windows laptop (Microsoft outlook) on my iphone?

hi, i would like to learn how i can get my address file from my old windows laptop (microsoft outlook) on my new iphone? who can help?

It should be possible with microsoft exchange but I do not know how... (sorry no Outlook expert)

Can't get iPhoto to print correct size photo

I have iPhoto 09.   I have two 4 x 6 photos I want to print, one on top of the other, with a 1 1/4 outside border all around and a 1/2 space in between them. I'm printing on an 8 1/2 x 11 piece of photo paper.
I did this several months ago and it worked fine. Now I'm trying to print the same arrangement, but can't get the sizing right. I don't remember exactly how I constructed the above layout but assumed that I printed it as a two-photo contact sheet. But now when I do it that way, the photos end up cropped and approximately 3 1/2 x 5 1/2 (instead of 4 x 6) and top/bottom borders of 1 3/4 instead of 1 1/4.   The L-R borders are now at 1 1/2 instead of 1 1/4. The 1/2 space in between them remains correct.
Can anyone help me figure out what I'm doing wrong?   Thanks.

Apply the library repair below:
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.

Can't get ipv6 address assigned correctly.

Similar Messages

Maybe you are looking for