Can't get OAM 11g Access Tester working
Hi,
I've been trying to get the Access Tester (oamtester.jar) from OAM 11g (11.1.1.3) working.
I can start the tester (java -jar oamtester.jar), but when I try to connect to the OAM server, I either get a "NAP initialization error" or a "challenge_failed"/mismatch error.
My OAM server is listening on the default port, 14100, and the OAM proxy is listening on 5575, and I've tried connecting to both ports, and get the different errors, depending on which port I try.
I've tried running the tester on the OAM server machine itself, from a different machine, etc., but get the same errors.
Can anyone tell me how I can get the tester to work?
Thanks,
Jim
Hi,
I got the logging in the access tester, and here's what I get when I try to connect to the OAM server:
Nov 6, 2011 2:16:58 PM ObAAAServiceClient setHostPort
FINER: ENTRY
Nov 6, 2011 2:16:58 PM ObAAAServiceClient setHostPort
FINER: RETURN
Nov 6, 2011 2:16:58 PM ObAAAServiceClient setHostPort
FINER: ENTRY
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.util.NAPLogger log
FINE: There are no entries in given access server list.
Nov 6, 2011 2:16:58 PM ObAAAServiceClient connect
FINER: ENTRY
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl writeObMessage
FINE: OpCode = 13 [InitNAP], SeqNo = 0 Message = protocol=NAP version=4 oldest=1
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl readMessage
FINE: Message received from Server: OpCode = 13 [InitNAP], SeqNo = 0 Message = protocol=NAP version=4 oldest=1
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl writeObMessage
FINE: OpCode = 0 [ServerDiagnosticEvent], SeqNo = 0 Message = sts=open
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl readMessage
FINE: Message received from Server: OpCode = 0 [ServerDiagnosticEvent], SeqNo = 0 Message = sts=open
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl writeObMessage
FINE: OpCode = 14 [NAPAuthnChallengeReq], SeqNo = 0 Message = cm=apache1 challenge=f5d58bf93da2331c of=1
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl readMessage
FINE: Message received from Server: OpCode = 14 [NAPAuthnChallengeReq], SeqNo = 0 Message = cm=AccessServerConfigProxy challenge=f5d58bf93da2331c st=ma%3d25%20mi%3d2%20sg%3d1 rt=1
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObNap CreateChallengeResponse
FINEST: Created NAP challenge
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl writeObMessage
FINE: OpCode = 15 [NAPAuthnChallengeResponse], SeqNo = 0 Message = response=2659cf320b28b197d027789ae069efe3
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelImpl readMessage
FINE: Message received from Server: OpCode = 15 [NAPAuthnChallengeResponse], SeqNo = 0 Message = st=ma%3d52%20mi%3d2%20sg%3d1 rt=0
Nov 6, 2011 2:16:58 PM oracle.security.am.common.nap.ObMessageChannelWrapper initNAP
SEVERE: Error in receiving hashed server challenge
Does anyone know why this is happening, and how to get around it?
Has anyone actually gotten the OAM 11g access tester to work with OAM 11g server via the OAM proxy (on port 5575)?
Thanks,
Jim
Similar Messages
-
How can I get my web cam to work in Adobe Connect ?
This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem? Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine. Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746. -
I have windows 8 and itunes 11.1 ... my laptop identifies my iphone 4 but itunes insists that I either update my phone to OS 7 or restore to by basic 6.1.3 OS I don't want to do either. How can I get itunes to access my iphone ?
RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. -
Can't get my iphone 4s to work
i can't get my iphone 4s to work. Message came up with 'sorry, you've not been given access to this service' when i try to make a call
Then contact your phone carrier.
-
Can't get wake on lan to work on Hp n40l microserver
Hello
I installed arch on my HP proliant microserver and I can not get Wake on lan to work. I tested my device with ethtool and it supports and is enabled for WOL with g value set for both.
But whenever I power it off by systemctl poweroff I can no longer see it as a connected device to my router
Before installing arch I tried ubuntu for testing the hardware quickly and I got wake on lan working there. I can not figure out what might be the issue here. Wake on lan is enabled in the BIOS.
Any help would be appreciated
CheersAs I see in the Archwiki , the wol package would also need the IP address ( though not necessary ) along with the mac address of the server.
I fear that the nic on the server does not obtain an ip in shutdown state, since I can't see it in my attached devices in the router settings( I could be very wrong ! )
Tried using wol on a laptop running arch, but with no luck.
I have seen this workaround in several places
https://bugs.launchpad.net/ubuntu/+sour … bug/981461
I even tried creating a similar script which would first do
ip link set dev enp2s0 down
systemctl poweroff
but that did not work either.
Cheers
Last edited by ayushjsh (2013-04-03 07:00:28) -
Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?
Hi Gary - thanks so much for your help. I'd already done that, but finally stumbled across the answer for my situation. I'm new to iMac and this is the first time I used Keynote, so maybe this info will help someone else along the way - I still haven't found this in any of the Keynote documentation or forums I've read.
My slides were all set up with at least one text box in which the text was animated. The sound was the last thing I added to each slide, exactly following the info in Keynote Help re: adding audio. The audio would work when I tested it in Inspector mode, and also if I switched to soundtrack instead. But not if sound was added to each individual slide. Hmmm. After I submitted the question above, I was running through the (auto) slide show one final time to check text, animation, etc. when I noticed that on just one single slide the sound effect came through, but at the very tail end of the slide. Hmm again. Why?
Through trial & error, the answer was in the animation section - not very intuitive re: audio. The steps to correct the issue were: 1) click on the sound icon embedded in each slide, 2) click on the animation tab in Inspector. 3) There's a drop-down menu there that allows you to reposition the audio clip to the #1 spot (if it was added after other "animation"). This allows the sound to begin before the text animation begins on each slide. Before doing this, I guess the sound was in there but the slides were transitioning before it had a chance to play.
Since this is the first time I've used Keynote and it's the most recent version, I'm not sure if this is a new feature to allow users to choose where within a slide to play a sound effect, but I'm guessing that might be why was unable to find any info on how to solve it. Hopefully this will help others who get stumped.
Thanks again for jumping in to help! I really appreciate it. -
I can't get my me mail to work on iCloud keeps rejecting my user id nothing works on the pad or pod either to do with mobile me aaaaaaaaaaaargh
Apple - please please let us know what is going onewaller wrote:
fazio96,
Could I prevail upon you to come up with a better thread title? I resisted my first inclination to move the thread to "Dustbin"; but I will say the title does little to inspire us to help. You may wan to read the article linked in my signature.
Thanks.
I'll change it now. I just realized it sounds rough, but I was mad because I couldn't get it work, it isn't anyone's fault, sorry
EDIT: I got it to work at an usable state! By using the 8192cu driver on the AUR and the suggestions in the comments about disabling power-save, I got it to be usable. It now has up to 8% packet loss, not 30-40% like before, and the ping spikes are now 300-400 ms and less frequent, not 1000-1200ms. It's not working really well but now I can at least surf the web. Thank you all for the patience.
EDIT 2: after testing more I realized it still disconnects every few seconds when I'm far from the AP. However, when connected, I still have very strong signal. If I use it on windows or another distro it doesn't disconnect. I tried compiling the driver from realtek by myself using the istructions in the second post but I don't know how to fix some compile errors, so I decided I'll stick with my usb dongle. Maybe someone will find a better solution.
Last edited by fazo96 (2013-09-30 16:08:10) -
I have tried to reindex my messages but I still can not get the search function to work in email
I have tried reindecing my messages by rebuilding the library but I still can't get my message function to work in mail. Any proposed solutions much appreciated.
Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
How can I get iCloud to accept my working Apple ID and password
My Apple ID and password works for iTunes and App Store. I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID. Apple ID must be in the form of email address (@me.com). I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?
I've also reset my password to my Apple ID. I still get the Unsupported ID and password.
-
Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.
Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy -
I just got a new itouch and i can't get imessage or facetime to work on my home network
I just got a new itouch 4 and i can't get imessage and facetime to work on my home wifi network (Airport Express). I can't explain it. The itouch works fine otherwise uncluding the internet. Facetime and imessage work at the apple store so there must be something wrong with my home network. Please help if you can!
iPod touch, iOS 5.0.1I changed the DNS to 8.8.8.8 as you suggested with no success, I even tried 8.8.8.8, 8.8.4.4 as suggested by others with no success either. When I try and activate iMessage or Facetime, I still get the same message "could not sign in, please check your network connection". The internet and Mail work perfectly fine on the iPod touch so the WiFi signal IS going through. I am at a loss, any other suggestions would be more than welcome. Thanks!
-
How can I get my excel spreadsheet to work in numbers
How can I get this budget sheet to work in numbers when it's from excel.
I couldn't get the picture of the whole thing it wouldn't load but you see where it say like 700.00 then below that it say 175.00 well that part works telling me what I need to know but when it get to where it says the 850 it stops working? it won't sum it out or something I'm not great with excel and this was sent to me by a first and it's our budget plan and I really need to be able to use it
-
How can I get my iPhone 5s to work in my 2015 outback
How can I get my iPhone 5s to work in my 2015 outback?
I Tried that and I can get calls out and in but no messaging.
AWindow opens and says this feature is not supported on this device
my iPhone 4 worked fine is it my iOS? -
How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?
Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.
Maybe you are looking for
-
How do i transfer my songs from an old itunes account to my new one that has a different apple id?
How do I transfer my songs from an old iTune account ot my new one? My old account has a different apple ID.
-
How do I add songs from my iPod to my iTunes
How do I add songs from my iPod to my iTunes??
-
....so I'm on fema's website and I want to take an elevation from fema, and put it onto a different screen. Your windows all get dumped into one location. Can't go back and pull out the window I need.... Jim
-
When I migrated recently to a Mac from a Windows computer, I copied the address book from my mail client (Thunderbird). Tonight, I have opened that address book file (abook.mab) in textedit on my iMac without a hitch. So, now I have a .txt document f
-
Hey all, I recently exported a video I edited in PrPro for my facebook, and after I uploaded it, it appeared all jagged and interlaced. I didn't see any options at the export window or media encoder to deinterlace, but apparently there is a "field o