I can't get my me mail to work on iCloud keeps rejecting my user id nothing works on the pad or pod either to do with mobile me aaaaaaaaaaaargh

I can't get my me mail to work on iCloud keeps rejecting my user id nothing works on the pad or pod either to do with mobile me aaaaaaaaaaaargh
Apple - please please let us know what is going on

ewaller wrote:
fazio96,
Could I prevail upon you to come up with a better thread title?  I resisted my first inclination to move the thread to "Dustbin"; but I will say the title does little to inspire us to help.   You may wan to read the article linked in my signature.
Thanks.
I'll change it now. I just realized it sounds rough, but I was mad because I couldn't get it work, it isn't anyone's fault, sorry
EDIT: I got it to work at an usable state! By using the 8192cu driver on the AUR and the suggestions in the comments about disabling power-save, I got it to be usable. It now has up to 8% packet loss, not 30-40% like before, and the ping spikes are now 300-400 ms and less frequent, not 1000-1200ms. It's not working really well but now I can at least surf the web. Thank you all for the patience.
EDIT 2: after testing more I realized it still disconnects every few seconds when I'm far from the AP. However, when connected, I still have very strong signal. If I use it on windows or another distro it doesn't disconnect. I tried compiling the driver from realtek by myself using the istructions in the second post but I don't know how to fix some compile errors, so I decided I'll stick with my usb dongle. Maybe someone will find a better solution.
Last edited by fazo96 (2013-09-30 16:08:10)

Similar Messages

  • No Mail. I can not get or send mail from my iPhone,iCloud, or mail  on the desktop. Password is correct i can get into iCloud but not able to get mail.

    I can not get or send mail from my iPhone, iCloud, and desktop mail.  All are the same account, password is right and working. When the problem first happened I updated to a new  password.
    The Mail and the phone are telling me ( "The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “k****n******2”}
    From the iCloud account i get a message saying  mail could not be loaded and the details. Which i have copyed below.
    Any thoughts or anyone I can ring ? This was a paid for mobile me account.
    Thanks
    Running 10.72
    ORIGIN
    server
    TYPE
    error
    BUILDNUMBER
    1FCS29.34215
    TIME
    Sun Dec 11 2011 10:49:50 GMT+0000 (GMT)        (1323600590380)
    HOST
    www.icloud.com
    USERAGENT
    Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_2) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7
    PRSID
    217870346
    RECENTLOGMESSAGES
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: MAIL in main()
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: -->  Request 1:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Object:sc1074:dispatch('load content')
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Attempting to load 'addresses'
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Module 'addresses' is not loaded, loading now.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Loading JavaScript file in 'addresses' -> '/applications/mail/frameworks/addresses/en-us/1FCS29/javascript.js'
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Object:sc3099:initStatechart()
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: -> entering "9 Address List Not Visible"
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: -->  Request 2:   GET to https://p03-contactsws.icloud.com:443/co/addressbook/?order=first,last&locale=en _US,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Module 'addresses' finished loading.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Evaluating and invoking callbacks for 'addresses'.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Module 'addresses' has completed loading, invoking callbacks.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: APPLICATION: Received applicationWillBecomeActive
    Sun, 11 Dec 2011 10:49:23 GMT:  WARN:  APPLICATION: Received applicationDidBecomeActive
    Sun, 11 Dec 2011 10:49:23 GMT:  DEBUG: <--  Response 2:  200  (1257ms),  headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8  body: (omitted)
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:1
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: -->  Request 3:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:2
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: -->  Request 4:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:3
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: -->  Request 5:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:4
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: -->  Request 6:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:5
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: -->  Request 7:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: <--  Response 7:  500  (4248ms),  headers: Content-Type=text/html  body: (empty)
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: Request in: /wm/preference-list-->1323600562085/1,500,4249ms
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: ServerPreferencesDataSource.retrieveResponse error = -1/500/guid=serverPrefsGuid
    Sun, 11 Dec 2011 10:49:44 GMT:  ERROR: CoreMail handled error 13002 before exiting Mail

    Spent at least 40 min talking to apple support, to sort it out. luckly not at my cost. After trying lots of things and speaking to a higher grade support person I was given a temp password which did the trick. I then was able to reset that with my own password. 
    The impression i got was no one knowns  what the problem is and resetting the password at the apple end works. Not sure if you would be able to self fix.

  • I can not get my regular mail to work since I changed to moved to iCloud. What do I need to do?

    I can not get my regular mail to work since i moved to iCloud. What do I need to do to update?

    Go to Settings>Wi-Fi.  At the bottom, make sure the "Ask to Join Networks" is ON.  When you are out and about, any network the iPad sees will be shown and it will ask you if you want to "Join" it.  If it is unsecure/free you tell it yes and you should connect.  However, if there is a little padlock looking icon shown with the network name, it means that it is a secure network and you need a password to join.  If you don't know it, you can't join.  At most Starbucks and such, the Wi-Fi is free and you should be able to simply connect.  Not really that hard.  There are not security settings on your iPad to adjust.  You'll figure it out.
    Best.

  • My Mountain Lion app failed while downloading, and now I can't download it without repaying for it.  How can I get my access code to work/download the app?

    My Mountain Lion app failed while downloading, and now I can't download it without repaying for it.  How can I get my access code to work/download the app?

    Welcome to Apple Support Communities
    Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact

  • I can't get my MobileMe mail account working with ...

    I have spend hours with trying to get my MobileMe (www.me.com) mail account to work correctly based on IMAP protocol on my Nokia 5800. I have the correct settings, I have tried both with and without SSL, and I do have other mail accounts  working (synchronising properly with IMAP on the 5800). I do use and access the same email account on other devices and PCs and have no similar problem. Consequently I am confused. how to get the issue resolved and would appreciate your help if you have eventually experienced this symptom and did come across it.
    Thanks,
    quasi13 

    I have spend hours with trying to get my MobileMe (www.me.com) mail account to work correctly based on IMAP protocol on my Nokia 5800. I have the correct settings, I have tried both with and without SSL, and I do have other mail accounts  working (synchronising properly with IMAP on the 5800). I do use and access the same email account on other devices and PCs and have no similar problem. Consequently I am confused. how to get the issue resolved and would appreciate your help if you have eventually experienced this symptom and did come across it.
    Thanks,
    quasi13 

  • How can I get my locked iPhone to work in the US

    Hi,
    I spoke with a genius at the montreal Apple Store, I asked about unlocks as I am moving to the states for work in the coming month. He mentioned that while carriers generally have to dot he unlocks they have unlocked international phones. My question is has anyone tried to dot his from Canada to the US. Also If you are still under warrenty and get a refurbished one in the US, at what point does it lock to your existing carrier. I was always confused as to how this works.Im sure there a lot of people who are wondering the same thing.
    Thank you

    Unlock can be done only by original Carrier. You should get
    this straightened out before leaving Canada. Warranty on your
    iPhone is not international - if you need any repair or replacement,
    you will have to return iPhone to Canada for this to be done.

  • Can't get my pci modem to work in the ms - 6215

    does anyone know how to get my pci modem to work in a ms - 6215, I've tried everything that I can think of including installing a modem  known to be good, since the motherboard is very unique in so that it has a riser that only has two pci slots on it and I've tried both of them, the os is windows me and when I first booted up all it found was an unknown pci card so I told it it was the modem and when I went to the modems in the control panel it tells me that it couldn't open the port even though the irq and com port info is the same in windows as to the post screen, the type of modem is a pctell 56k, and the guy who brought me this thing told me he didn't have the driver cd that came with it but since I have a external modem that worked with it I was able to update all of the motherboard drivers...
    thanks
    Michael Croskrey
    ([email protected])

    Did you get a correct ME driver for your Modem?

  • Can\'t get both rom drives to work at the same time

    HI I  just finished building my new system with the MSI 6585 and everything works well EXCEPT my two roms drives.  I can get one to work or the other to work but not both at the same time.  I have the hard drive on the primary IDE and both rom drives on the secondary IDE.  I tried setting one up as master and one as slave.  I tried them the opposite way around.  I tried setting them both on cable select.  If I try to boot with both of them hooked up the computer refuses to boot past post .  Can anyone give me any suggestions please?  
    I am running XP pro with 512 megs of ddr ram .
    The cd burner is a liteon 40X12Xthe 48.  To be honest I cannot remember what brand the DVD player/cd player is ..
    Thank you
    Linda  :D

     :D Thank you thank you thank.. you .. just got back from the computer store.. LOVE that place.. with a brand spanking new round cable and voila .. both roms working..
    I had tried several cables I had here at home.. but I guess they are all hooped..  :(
     YEHAAAAAA..

  • How to Get Yahoo Push Mail to Work on the iPhone- Finally

    I post this for the benefit of all of you struggling with this same problem and how to resolve it.
    I talked to AppleCare this morning and this is what they said that Yahoo push start working- the first thing that has after spending several solid useless days trying every other recommendation on various forums, none of which worked. Here is what they said to do:
    1. Restore completely, without having the backup restore onto the iPhone.
    2. Delete all of your email accounts on the iphone (I did this first before doing #1 to see if the remainder would work without a restore, but it did not, but when I went back and did #1 first it worked).
    3. Re-enter all of your e mail accounts, beginning with the non-yahoo accounts first- very important. Be sure to set up at this time whether you want them manually to check or every 15 minutes for mail, etc., BEFORE you set up or enter the Yahoo account.
    4. Then, after the above, enter the Yahoo account.
    The support guy told me that for some reason changing how often the send receive occurs (manually, etc.) AFTER first setting up the yahoo account somehow overwrites information for the yahoo account and keeps the push from working. He said he had solved the push for a number of people following the procedure, and I agree, it did work.
    Whether it will keep working I am skeptical! Also, I meant to ask, but did not: Does this mean that if I now ever change how often the iPhone checks for mail will it now overwrite the yahoo information and cause the push to stop working again, meaning I have to do the above steps again.
    Finally, the push is not instantaneous, but is in about 2 minutes or so, at least from what I have seen- a lot better than every 15 minutes.

    Sorry it did not work for you. Call Apple at 800-myiphone- maybe they can help.

  • I can't get Sort By Name to work on the Bookmarks Menu. How do you sort your folders alphabetically?

    I have my bookmarks sorted in folders. When I create a new folder it goes to the end of the list. I have tried going into Bookmarks/Show All Bookmarks, right click on Bookmarks Menu and Sort By Name but nothing happens. I have to manually move the newly created folder.
    Pat

    ''Pat L [[#answer-679152|said]]''
    <blockquote>
    ''FredMcD [[#answer-679014|said]]''
    <blockquote>
    Open the Bookmarks Manager. Open the folder branch tree. On this tree,
    select the folder you want with a right click.
    </blockquote>
    I have no problem sorting an individual folder by name, I can't get the list of folders to sort. As you can see by the attached images, several folders I've added are at the bottom of the folder list and even after I right click on Bookmark Menu/Sort By Name, they don't alphabetize.
    Pat
    </blockquote>
    Sorry, here is the other image.

  • How can I get my e-mail addresses working

    I synchronize my Touch with outlook 2003. The imported e-mail adresses are mainly unusable. Outlook displays the addresses by the name of the contact instead of the complete address. The touch imports the displayed name and not the e-mailaddress. This means that I can't send mails from the Touch using my imported address book. Who recognizes the problem and who knows how to solve it?

    BasHIDAP -
    I too sync with Outlook 2003 as well. I am confused on your comment about not being able to send messages from your iPhone. Quick question – I am going to assume that you are working Exchange as well.
    Though you may not able to view e-mail details when using the Contact list. When compose a message and start typing a name in the ‘To’ filed the phone starts to filter names and at that point you can see the full e-mail address.
    As I mentioned above I seem to have no problems send and receiving messages on my iPhone. If this is not the case can you provide additional information as to what happens when you try to send mail?
    Respectfully –
    BH

  • Since moving to the cloud can't get .mac/.me mail to work in Outlook 2011

    I get the following error repeatedly in Outlook 2011 for Mac since moving to icloud on Lion OSX.
    Anyone know what settings will stop the errors - getting them every few minutes.
    Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.
    Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.
    Account name: "Mac"
    Error code: -3170
    Thanks.

    Hi
    My server settings are as follows:
    Username is the name without the "@mac.com"
    Password is my correct password
    Incoming server imap.mail.me.com
    Using default port (993)
    Use SSL to connect (recommended) checked
    Always use secure password is unchecked
    Outgoing server is smtp.mail.me.com
    Override Default port is checked and set to 587
    Use SSL to connect is checked
    Have tried both Use incoming Server info
    and Username and Password  (I get the same result with both)
    This has been happening for days so it's not the server problems that were causing it.

  • Hello.....after updating to Yosemite, i can't get my exchange mail to work.  It keeps saying can't connect to exchange server and asks for my password.  My mail is still working fine on android phone and ipad2.  Can someone help?

    Hello....after updating to Yosemite my mail isn't working .  Keeps saying can't connect to exchange server and asking for password

    I am having this exact same problem with my gmail account. Hopefully someone will have a remedy.

  • I can not get my .me email to work since the IOS6 upgrade. Does anyone have the send mail and smtp info. I thought I knew it but I thought wrong.

    For some reason o can get my @me.com email to work. What are the send and receive strings?

    Do you have any security software installed, blocking these ports? http://support.apple.com/kb/TS3125

  • I can't get my e-mail to work after installing Lion

    I installed Lion O.S. on my MacBook Pro and everythign works great except my e-mail, it just opens up an error screen??  Any help would be great!!

    You should only have one ID for iCloud, and perhaps one for the iTunes Store, depending on how you set it up.
    To setup iCloud email you need to login with your iCloud @me.com email address and iCloud password.

Maybe you are looking for

  • Text Caption will not pop up and go away.  It is there the whole slide

    I have a Text Caption box that I am wanting to pop up and give a Hint on how to answer a question slide and then go away after a few seconds. I have this in the Options tab for it: Display for: specific time: 2.2 seconds Appear after: .3 seconds Effe

  • Access global attribute in webdynpro component?

    Hi all i have 2 webdynpro components Comp1 Comp2 Now i have declared a global attribute in comp1 in component controller. I have embedded both component together to share values I want to change the global attribute of comp1 from comp2 Let me know ho

  • Open Quantity in item selection screen

    I am Stuck in btwn a process. In my Orgn we have ZMO and ZCO Doc types. ZMO is for manf order and ZCO is for Call off order from created with reference to ZMO.1 ZMO= N ZCO ZMO - 10 Quantities - Ill have to use the materials , I should create ZCO with

  • Know about sax

    I want to read datas from xml in my java program...I tried many sites n tutorials,but nothing helped me.. can you suggest some?

  • Insert long string to database

    Hi, I am using the JDBC in my program. I'm trying to insert a string of length greater than 4000 into a LONG field and receive the following errors, "ORA-01704: string literal too long" Can anyone explain how this is done? I checked it on Internet, i