Can't get presenters screen on correct montior

I have run into a real problem. When I go to view my presentation I want the presentation on the projector, and the presenters screen on the mac. how I can get this, no matter what I do, the presenters screen goes on the projector and the presentation on the Mac.
Yes I have clicked use alternate for presentation, and it makes no difference. I have made the projector the main monitor, and no differnence, I have switch projectors, and computers and can't get it to work.
I end up mirroring defeating my ability to see the next slide.
What in the world am i doing wrong?
thanks

Hi! i think you have to check "Alternate display" in Keynote/Preferences.../Presenter Display.
and there you have some option about who you see de Slides on the projector and your Mac.
Christian Rojas
Admin Carmary
Cúcuta -Colombia

Similar Messages

How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?

I just upgraded to the iPhone 4. When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to. How can I get the screen to lock while I'm talking? It's driving me NUTS.

The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

My external monitor works but I can't get my screen to work on my power book anymore

Can not get my screen on power book G4 to work but my external monitor works fine. Did I press something and turn it off?

rm44 wrote:
The both screens always worked fine but now the power book doesn't show anything on the screen. I didn't drop it or even move it. Where is the brightness button? Could I have hit it by mistake?
Thanks so much for your help.
F2 is the up-brightness button, F1 is the down-brightness button, usually, on PowerBooks. If for some reason the F1 button got held down for a couple of seconds, the display would go completely dark.
That being said, if the backlight does not come up (easily determined by seeing if the Apple outline on the cover is lit up) then the most likely suspect would be the inverter board, or the connection to the inverter board. If this is a Titanium PG G4, the inverter board is easy and relatively inexpensive to replace. For the Aluminum models, I don't know if that is quite so true.

Can I get the screen on the iPhone 4S fixed if it was dropped and cracked? How much does it cost?

Can I get the screen fixed on the iPhone 4S if it was dropped and cracked? How much does it cost?

Apple do not repair ,an OoW echange unit in US is $199 for an iP4S
if you take it to an unauthorised repairer they do not have Apple spares and Apple will subsequently refuse any service or support on that device

Can't get any screen display (nano 7th gen)

can't get any screen display (7th gen nano) -- yesterday had low battery and it may have been "a little sweaty" wet, charger all night -- still can't get it to "turn on"

Hello garlaham,
I would be concerned too if my iPod nano's was not powering on. I recommend following the steps below:
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
I got this information from the following article for the 6th generation iPod nano. The steps are the same, except I updated the second step with the reset for the 7th generation iPod nano:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
How to reset iPod
http://support.apple.com/kb/ht1320
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I get full screen to work with utube in google chrome?

When I use utube in google chrome I can not get full screen to work. How can I fix this?

See: http://forums.adobe.com/thread/1193685
also: http://helpx.adobe.com/flash-player/kb/enable-system-flash-player-google-chrome.html

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Music in itunes from different cd's, how can i get it to have correct info?

1. I have over 2000 songs in itunes from different mixed cd's, how can I get them to have correct artist and album and titles?
2. How can I convert them all to mp3 because I have to be able to send them to windows media player because I have mp3 players that I would like to play these on along with my ipod?

I personally use TuneUp from http://www.tuneupmedia.com/
It works on both Mac and PC.
It is a great tool for correcting MetaData "Music Info" for all of your songs. It also adds the correct album artwork and can remove duplicate songs from your library easily.
iTunes on PC will convert the WMA to MP3 for you if you like. To do so just right click on your WMA files in iTunes and choose convert to MP3.
If you have already moved all of your music to Mac and no longer have a windows machine there are a couple of programs that will do it for you from Mac OS X. Some are free and some cost money. Let me know if you would like to know a couple of examples.

Hello - can anyone tell me why my iPad (4th Gen) screen will no longer rotate. I don't have a screen lock symbol next to the battery icon. I have the rotate icon on my desktop but still can't get the screen to rotate.

Hello - can anyone tell me why my iPad (4th Gen) screen will no longer rotate. I don't have a screen lock symbol next to the battery icon. I have the rotate icon on my desktop but still can't get the screen to rotate.

Double-click the Home button and swipe Task Bar to the right. Check the Rotation Lock on the far left of Task Bar.
http://i1224.photobucket.com/albums/ee374/Diavonex/ba23c598623fe4fd062a40e349af2 18d.jpg

Can i get my screen repaired at an apple store?

can I get my screen repaired at an apple store?

Apple will exchange your iPod for a refurbished one for $199 for a 64 GB 4G and $99 for the others. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

HT4528 Can I get a screen replacement for free if i'm still under warranty?

Can I get a screen replacement for free if i'm still under warranty?

Not if it was caused by accidental damage. You can make a Genius Bar appointment at your nearest Apple Store and see if they do screen replacement. If they do it is $149, if they can't it is $229 for an out-of-warranty replacement. If you bought AppleCare + it is a $49 deductible.

Where can I get my screen replaced?

How can I get my screen replaced?

The following may help: https://www.apple.com/support/ipad/repair/screen-damage/

Dropped my iphone 5. Can I get the screen replaced for free?

Dropped my iphone 5. This is the replacement phone Apple gave me a month ago - the camera didn't work properly so they gave me this one. They told me it has a 90 day guarantee. Can I get the screen replaced for free?

That is not a 90 day guaranrtee. It is a 90 warranty which only covers workmenship and materials not damage. So no. You are going to have to pay to get it replaced.
Allan

Can't get Landscape printing aligned correctly...

I'm new to Java and this forum, so any help with the following would be greatly appreciated:
Description: Incorrect height alignment when printing Landscape.
Hardware: Power Macintosh 8500/120, 48MB RAM.
Brother HL-1650 Laser Printer, 8MB RAM.
Software: Mac OS 8.6.
MRJ2.2 (JDK1.1.8), MRJSDK2.2, JFC/Swing1.1.1.
Procedure: 1) Compile BorderDemo.java (see source code below) with javac.
2) Run BorderDemo with JBindery.
3) Select "Landscape" printing, then select "Print".
Results: Incorrect alignment of GridLayout within BorderLayout's Center position.
The first printed row is incorrect. It is split with 6/8ths in row1, and 2/8ths
in the last row.
Expected: The BorderLayout's Center position should print 6 rows and 7 columns of
8 x 1 TextEdit field items (This is supposed to be a calendar). It should fill
the 8.5 x 11 piece of paper in Landscape print mode.
Note: It correctly displays on the computer monitor.
I've tried lots of combinations of GridLayout, BorderLayout, and BoxLayout, but
I can't get it to print correctly in Landscape. Any help would be greatly appreciated!
Compile and run the following code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class BorderDemo {
static JFrame frame1 = new JFrame( "BorderDemo");
static JPanel panel1 = new JPanel();
static JPanel panel2 = new JPanel();
static Label R0_1L1, R0_1L2, R0_1L3, R0_1L4, R0_1L5, R0_1L6, R0_1L7,
R0_2L1, R0_2L2, R0_2L3, R0_2L4, R0_2L5, R0_2L6, R0_2L7;
static DayPane R1C1, R1C2, R1C3, R1C4, R1C5, R1C6, R1C7,
R2C1, R2C2, R2C3, R2C4, R2C5, R2C6, R2C7,
R3C1, R3C2, R3C3, R3C4, R3C5, R3C6, R3C7,
R4C1, R4C2, R4C3, R4C4, R4C5, R4C6, R4C7,
R5C1, R5C2, R5C3, R5C4, R5C5, R5C6, R5C7,
R6C1, R6C2, R6C3, R6C4, R6C5, R6C6, R6C7;
public static void setupframe1() {
// Setup and fill frame1.
frame1.setSize( 760, 590);
frame1.setVisible( true);
frame1.getContentPane().setLayout( new BorderLayout() );
// Setup and fill panel1.
panel1.setLayout( new GridLayout( 2, 7, 0, 0) );
panel1.setPreferredSize( new Dimension( 730, 24) ); // bind this height
panel1.setFont( new Font( "Times", Font.PLAIN, 10) );
panel1.setBackground( Color.white);
R0_1L1 = new Label( "CurrentMonth");
R0_1L2 = new Label( "CurrentYear");
R0_1L3 = new Label( "");
R0_1L4 = new Label( "");
R0_1L5 = new Label( "");
R0_1L6 = new Label( "");
R0_1L7 = new Label( "");
R0_2L1 = new Label( "Sunday", Label.CENTER);
R0_2L2 = new Label( "Monday", Label.CENTER);
R0_2L3 = new Label( "Tuesday", Label.CENTER);
R0_2L4 = new Label( "Wednesday", Label.CENTER);
R0_2L5 = new Label( "Thursday", Label.CENTER);
R0_2L6 = new Label( "Friday", Label.CENTER);
R0_2L7 = new Label( "Saturday", Label.CENTER);
panel1.add( R0_1L1);
panel1.add( R0_1L2);
panel1.add( R0_1L3);
panel1.add( R0_1L4);
panel1.add( R0_1L5);
panel1.add( R0_1L6);
panel1.add( R0_1L7);
panel1.add( R0_2L1);
panel1.add( R0_2L2);
panel1.add( R0_2L3);
panel1.add( R0_2L4);
panel1.add( R0_2L5);
panel1.add( R0_2L6);
panel1.add( R0_2L7);
// Setup and fill panel2.
panel2.setLayout( new GridLayout( 6, 7, 0, 0) );
panel2.setPreferredSize( new Dimension( 690, 544) ); // height not bound
panel2.setBackground( Color.black);
R1C1 = new DayPane( );
R1C2 = new DayPane( );
R1C3 = new DayPane( );
R1C4 = new DayPane( );
R1C5 = new DayPane( );
R1C6 = new DayPane( );
R1C7 = new DayPane( );
R2C1 = new DayPane( );
R2C2 = new DayPane( );
R2C3 = new DayPane( );
R2C4 = new DayPane( );
R2C5 = new DayPane( );
R2C6 = new DayPane( );
R2C7 = new DayPane( );
R3C1 = new DayPane( );
R3C2 = new DayPane( );
R3C3 = new DayPane( );
R3C4 = new DayPane( );
R3C5 = new DayPane( );
R3C6 = new DayPane( );
R3C7 = new DayPane( );
R4C1 = new DayPane( );
R4C2 = new DayPane( );
R4C3 = new DayPane( );
R4C4 = new DayPane( );
R4C5 = new DayPane( );
R4C6 = new DayPane( );
R4C7 = new DayPane( );
R5C1 = new DayPane( );
R5C2 = new DayPane( );
R5C3 = new DayPane( );
R5C4 = new DayPane( );
R5C5 = new DayPane( );
R5C6 = new DayPane( );
R5C7 = new DayPane( );
R6C1 = new DayPane( );
R6C2 = new DayPane( );
R6C3 = new DayPane( );
R6C4 = new DayPane( );
R6C5 = new DayPane( );
R6C6 = new DayPane( );
R6C7 = new DayPane( );
panel2.add( R1C1);
panel2.add( R1C2);
panel2.add( R1C3);
panel2.add( R1C4);
panel2.add( R1C5);
panel2.add( R1C6);
panel2.add( R1C7);
panel2.add( R2C1);
panel2.add( R2C2);
panel2.add( R2C3);
panel2.add( R2C4);
panel2.add( R2C5);
panel2.add( R2C6);
panel2.add( R2C7);
panel2.add( R3C1);
panel2.add( R3C2);
panel2.add( R3C3);
panel2.add( R3C4);
panel2.add( R3C5);
panel2.add( R3C6);
panel2.add( R3C7);
panel2.add( R4C1);
panel2.add( R4C2);
panel2.add( R4C3);
panel2.add( R4C4);
panel2.add( R4C5);
panel2.add( R4C6);
panel2.add( R4C7);
panel2.add( R5C1);
panel2.add( R5C2);
panel2.add( R5C3);
panel2.add( R5C4);
panel2.add( R5C5);
panel2.add( R5C6);
panel2.add( R5C7);
panel2.add( R6C1);
panel2.add( R6C2);
panel2.add( R6C3);
panel2.add( R6C4);
panel2.add( R6C5);
panel2.add( R6C6);
panel2.add( R6C7);
WindowListener l = new WindowAdapter() {
public void windowClosing( WindowEvent e) {
System.exit( 0);
frame1.addWindowListener( l);
public static void main( String[] args) throws Exception {
setupframe1();
Container f1 = frame1.getContentPane();
f1.add( "North", panel1 ); // bind height
f1.add( "Center", panel2 ); // no binding
frame1.show();
Thread.sleep( 5000);
frame1.repaint();
Thread.sleep( 5000);
PrintJob pjob = frame1.getToolkit().getPrintJob( frame1, "Printing BorderDemo", null );
if( pjob != null) {
Graphics pg = pjob.getGraphics();
if( pg != null) {
frame1.printAll( pg);
pg.dispose(); // flush page
pjob.end();
class DayPane extends JPanel implements ActionListener, FocusListener {
JTextField tfield1, tfield2, tfield3, tfield4, tfield5, tfield6, tfield7, tfield8;
DayPane( ) {
setLayout( new GridLayout( 8, 1, 0, 0) );
tfield1 = new JTextField( );
tfield2 = new JTextField( );
tfield3 = new JTextField( );
tfield4 = new JTextField( );
tfield5 = new JTextField( );
tfield6 = new JTextField( );
tfield7 = new JTextField( );
tfield8 = new JTextField( );
add( tfield1);
add( tfield2);
add( tfield3);
add( tfield4);
add( tfield5);
add( tfield6);
add( tfield7);
add( tfield8);
public void actionPerformed( ActionEvent evt) {
if ( evt.getSource() instanceof JTextField)
; //removethis.
// frame.update( this);
public void focusLost( FocusEvent evt) {
; //removethis.
// frame.update( this);
public void focusGained( FocusEvent evt) { }

Force the landscape.
Check it out:
pf.setOrientation(PageFormat.LANDSCAPE);
{pf ~ PageFormat}
B@ron {EU.BELGIUM}

Can't get presenters screen on correct montior

Similar Messages

Maybe you are looking for