Can't get the Audigy 2 ZS to rec

I am clearly doing something wrong, but what? I updated the drivers and programs, and ran the diagnostics which indicate everything is ok.
My only goal is to be able to record from my turntable. I ran RCA outs to my regular amp, and it sounds fine, so I know the turntable is doing its job. I wanted to record from the SPDIF output of the Denon turntable, but when that didn't work, I just used the regular outputs.
When I turn on the Creative Play Center and push the Record button, after selecting the Line In source, it doesn't appear that the input is recognized as having any signal on it.
I am wondering if I might have a motherboard-level conflict. I turned off the built-in sound card using the motherboard's bios setup.
At the present time, I am using an older Microsoft Sound System that connects to the PC using the USB connections, so the SoundBlaster is not set up to dri've speakers. Once I can make it record, then I will add speakers.
Any and all suggestions would be very much appreciated. I have tried everything I could think of with no luck and am very frustrated.
Thanks in advance!
Bud Izen
Keizer Oregon

are you going from turntable to amp to computer? i think you need the amp in the chain..

Similar Messages

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

Can't get my audigy SE to work on vista!!! H

just installed vista and i can't get my audigy SE to work?just installed the latest driver (from the creative website) and still nothing?it worked fine yesterday on my XP sp2... i also installed openAL....
can anyone tell me what to do ?

Does it show up in My Computer?

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

Delete the broken links in iTunes then look at your purchased list to redownload.
If this happened because you were deleting files from the iTunes folder in Finder, don't. You have to let iTunes do all the deleting and moving or you will end up with broken links.

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's Imac? I have a list of his passwords, but nothing works!

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's iMac? I have a list of his passwords, but nothing works! I know his email, but that account has been cancelled for security purposes, so we can't just request a new one. I tried his security questions to no avail.
Thanks

Since that password is tied to his Apple ID, you will need to contact Apple; as far as I know, it will be a somewhat lengthy procedure and you will need to furnish necessary paperwork (including a death certificate as far as I know). Best to either stop at an Apple store or call them to find out exactly what it is you need to do.

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

I deleted a calendar tab. How can I get the data back?

I accidently deleted the calendar tab of my wife and deleted all her apoointments on her iphone and the iMac. I am in ****. How can I get the calendar data back=?

Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

Can not get the Cisco TSP to show UP - 2003 64bit

Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list. It works perfectly on my Windows 2003 servers, but will not work on this new Windows 2003 64 bit server. Any tricks to getting this to load?
Thanks
Keith

Hi
There is no 64-bit TSP yet. Whilst 32-bit apps will work OK for the most part on 64-bit via the WoW function, drivers tend to not be so flexible, and that's what TSP is...
You'll have to bother your Cisco accounts folks to get this prioritised, it is upsetting a lot of people...
Aaron
Please rate helpful posts...

PI 7.11 - Where can I get the NEW java API's

Hi,
We use PI 7.0 in productive environment, but we plan a release update to PI 7.11. We have several Java Mappings for PI 7.0 with Java 1.4. So we have to upgrade this also to Java 1.5.
We are using following SAP Java libs:
- aii_map_api.jar
- aii_mt_rt.jar
- guidgenerator.jar
- sapxmltoolkit.jar
Where can we get the equivalent libraries of the PI 7.11 system. Are there new API's? Is there a documentation where to get this?
Thx in advance
Michael

Thx !!!
Quick answer )

On my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

thanks for your reply.
in Dutch it says that there are no updates available. I know that after
installing cs4 there are updates but i can't load them automatically. I did
a delete and reinstall, but still get the message.
kind regards,
2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
automatic update voor CS4 master collection. I removed my panda antivirus
and still can't automatically update. somebody any suggestion? created
by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6755843#6755843>

How can we get the values from the view?

Hi All,
my scenario is i have two fields in my view .one is parameter.and another on is select-options.how can i get the user entered values into my selection screen.?
for the select options i get the values into field-symbol.for parameter i get the value using get_attribute.
can i use like this in select statement.
WHERE SERVICE_ID = ZSD_DD_AUFNRS
                   AND CRE_DT IN <FS_DATE>.
Regards,
Ravi.

Hi Sravan,
when i am using the below code to generate self defined functions i m getting a error .
*Generate an object for self defined functions
DATA: lo_self_functions TYPE REF TO if_salv_wd_function_settings,
*Generate an object for button 'Confirm'
       lr_button TYPE REF TO cl_salv_wd_fe_button,
       lo_self_function TYPE REF TO cl_salv_wd_function,
              l_text type string.
*Set Self-defined functions
*'Confirm' Button
lo_self_functions ?= l_value..
lo_self_function = lo_self_functions->create_function( 'CONFIRM' ).
CREATE OBJECT lr_button.
CLEAR l_text.
l_text = 'Confirm'.
lr_button->set_text( l_text ).
lr_button->set_image_source( '' ).
lr_button->set_image_first( 'X' ).
lo_self_function->set_editor( lr_button ).
Error when processing your request
What has happened?
The URL http://cgslsvr3.cgsl.com:8020/sap/bc/webdynpro/sap/zsdr_cash_work_list/ was not called due to an error.
Note
The following error text was processed in the system CGD : WebDynpro Exception: IDs Can Only Contain Characters of Syntactical Character Set
The error occurred on the application server cgslsvr3_CGD_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TOOLBAR_BUTTON==========CP
Method: NEW_TOOLBAR_BUTTON of program CL_WD_TOOLBAR_BUTTON==========CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEM of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CGD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cgslsvr3_CGD_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cgslsvr3_CGD_20 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 110 -u: CT-0024 -l: E -s: CGD -i: cgslsvr3_CGD_20 -w: 0 -d: 20080414 -t: 105835 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How can i resolve it?
Regards,
Ravi

How can i get the data from the weblink

Hi All,
Good Afternoon,
i create a page with picklist,
that picklist contains so many currencies like(USD,AED,BSD----------)
when ever i am selecting the currency from that picklist,
that time i want to get the current exchage rate from this link
http://www.oanda.com/convert/classic
how can i get the current exchage rate from that link.
pls give me the gudaincee.
i hope u will help me.

Hi Gaurav,
Below given link gives a nice demo of integrating web service with OAF. (For using captcha user verification service).
[http://oracle.anilpassi.com/integrate-oa-framework-with-web-service-2.html]
However, using web services will cost little extra effort of learning SOAP and wsdl.
Please let me know if you find any difficulties related to web services.
Abdul Wahid

How can I get the photos from my old icloud backup on to my computer?

I got a replacement phone and now there are 2 iphone backups. There's the old phone with the pictures on it I would like to put on to my windows 8 pc. I can't figure out how to get them. I can't restore them to my iphone because I already have another file in icloud for that. How can I get the old file with my pictures on to my computer??

You can only access them by restoring the backup to your phone. You can backup your phone (such as by backing it up to your computer using iTunes), restore the old backup, transfer the recovered photo to your computer (iOS: Import personal photos and videos from iOS devices to your computer), then restore the backup you made earlier to return your phone to its current state.

Can't get the Audigy 2 ZS to rec

Similar Messages

Maybe you are looking for