Can't group elements , although they have not been locked.

Hello out there ...
I am selecting all elements within a slide using the shift key; however, the "group" command remains inactive. I have not not "locked". The master slide in question is "title and bullets - left".
What am I doing wrong, or not doing ?
Tks for any help.
jc

Thank you Brian.
I was hoping for a few more replies, but it's a matter of trying things out I guess. I am new at Keynotes, but I am learning. I took a "One to One" lesson in Melbourne, which although expensive, was very profitable. I think it's a fantastic program.
Tks again
jc

Similar Messages

  • Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos.

    Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos. When I turn off photo stream on iCloud preferences the memory is freed up. I like to be able to access my icloud photo streams on
    my macbook but it has a small Hardrive and loosing that much space is annoying and it kind of voids the point of photo streams. Is there a way I can stop
    this ?

    Is there a way I can stop
    this ?
    No, Photo Stream is syncing with iCloud. The most recent 1000 photos in iCloud will be buffered on your mac, even if you do not import them to your photo library, if you enable My Photo Stream.
    See this link:   iCloud: Photo Stream FAQ
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.

  • Error:-They have not been assigned  to VMS role

    Hi.
    When i enter t Code VELO it shows me error
    "They have not been assigned  to VMS role"
    this error was not there when there was no configuration.
    Reg,
    Amol

    Hi,
    As far as I know, you need to maintain business org details (like org name, positions, business partners etc) in the ppoma_crm tcode. Then have to assign a position to your user ID. This assigns the business role as well.
    This link should be helpful:
    http://www.sapcrmsecurity.com/SAP%20CRM%20Business%20Role.html
    Regards,
    Srikishan

  • Having a hard time transferring photos from MacBook Pro once they have been cropped or colored enhanced to my iPhone or iPad. If they have not been manipulated then they transfer fine. How can I fix this?

    I've been cropping and editing pics in my MacBook Pro but once I try to transfer them to the iPhone or iPad 2 only the photos that have not been manipulated transfer with no problems. How do I solve this problem?

    Option 1:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for the iPod Photo Cache.
    Trash it. Start iPhoto and try sync again.
    If that fails:
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Use the option to check and repair library permissions
    Regards
    TD

  • Though my settings are to refresh my podcasts every hour, lately they have not been refreshed at all

    Mac mini 2.3 GHz Intel Core i5 running 10.8.2, 192 GB free
    8 GB memory, using 5 GB
    iTunes 11.4
    Ever since I upgraded (by force) to iTunes 11.4 I have been having quirks (like when I hit the word Podcasts in the Library panel there is always a delay in going to that screen, and I am constantly being barraged with messages asking if I still want to receive certain podcasts because I haven't listened to them in awhile, which is often untrue), but over the holiday weekend I began to notice that many of my podcasts were not refreshing, even tho' I have them set to refresh every hour. I starting looking in the iTunes store and discovered that there were several episodes of several different podcasts which had not been automatically downloaded, so I manually downloaded them. There may be more, as I haven't gone through them all.
    Also, on each of the pages in the iTunes store of each of the podcasts to which I subscribe it has a "subscribe" button, so I wonder why it says "subscribe" when I already am subscribed. I can't remember if in the past it read "Unsubscribe" for podcasts to which I already have a subscription.
    What could be causing this problem? My computer is always on, and this has never happened to me before in all the years I've been subscribing to podcasts.

    More info:
    I repaired my Disk Permissions twice, and each time I got a ton of corrections regarding iTunes. Here are just some of them (don't know what all the "Dutch" ones are about):
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AACEncoderConfig.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AACEncoderConfig.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUser.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUser.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUserWide.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUserWide.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AutofillSettings.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AutofillSettings.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/BurnSettings.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/BurnSettings.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/CDInfo.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/CDInfo.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ConvertID3.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ConvertID3.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/EQPresets.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/EQPresets.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ErrorReportDialog.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ErrorReportDialog.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/FormatPopup.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/FormatPopup.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/HomeSharingServerSettin gs.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/HomeSharingServerSettin gs.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ImportSettings.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ImportSettings.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogArtworkView.n ib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogArtworkView.n ib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogInfoView.nib” ; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogInfoView.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogLyricsView.ni b”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogLyricsView.ni b”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleInfoV iew.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleInfoV iew.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleItem. nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleItem. nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleOptio nsView.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleOptio nsView.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleSorti ngView.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleSorti ngView.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleVideo View.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleVideo View.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogOptionsView.n ib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogOptionsView.n ib”

  • Can I send reminders to fill out the form if they have not been completed?

    There is not a great response rate so I would like to remind people to fill out the form rather than sending it again.

    Formscentral has no ability to send reminders so you would have to do this via email assuming you know who all has tried to fill out your form.
    Andrew

  • My iTunes is suddenly saying both my iPod & iPhone are synced with another computer, which they have not been.

    I recently lost all of the music from my laptop's hard drive, and therefore from i-Tunes.  I still have all of my music on my iPhone (3GS) (and a smaller version on my iPod Touch (3)), however when I try to sync them iTunes says the devices are synced with another computer & the only options I have is to erase the iPhone/iPod & sync with the very little music that has been able to be recovered back into iTunes, or to transfer the purchases.  I have checked the computer is authorised for my iTunes account, and have transferred the purchases back.  I really don't want to have to reload my CDs on when they are all on other devices.
    Does anyone know why iTunes is suddenly not recognising devices it did previously, and how I get it to recognise them again?  And most importantly, how I can transfer the music on my iPhone/iPod back into the laptop's iTunes?

    The music was accidentally deleted as I was cleaning up my SafeSync account (like a Cloud) & I unwittingly deleted My Documents & My Music from my hard drive as I did so - these are the only files that were affected.  So no catastrophic issue apart from me not knowing what I'm doing.
    And IT guy performed a recovery for me but was only able to retrieve about 10% of my documents and only 45 songs of the 1700 or so I had.  There is no up to date back up of my computer - trust me I've learnt a lesson there.
    Since then iTunes doesn't recognise my devices as being synced to that computer, but there is no other computer for them to be synced to so I don't understand how this happened or how to fix it.  I understand that my devices aren't back ups, but it seems stupid to lose the 1700 songs I have on my iPhone.  I have transferred the purchases, but the majority of them are songs I've loaded from CDs & obviously it would be a very time consuming process to try to reload all of them - obviously something I would like to avoid if possible.

  • Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleti

    Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleting the empty recovered photo files but it just keeps asking me every time I go to open iPhoto! I'd love to just get rid of the "found" photos (I can't open them anyway!)
    How do I get rid of them so that I can just open iPhoto straight up without this?
    Linda

    Open your iPhoto Library package with the Finder.
    Click to view full size
    look for a folder titled Import or Importing and move it to the Desktop. Launch iPhoto to see if the message goes away.  If there is no message  check the contents of the Import folder to see if you want to keep any of those image files (usually they have not been imported into iPhoto). If you want to keep them then drag the folder into the open iPhoto window to import.
    OT

  • Updated to an iphone 4s from iphone 4. Did backup and sync but some apps have not been copied to the 4s although they do show up on the iphone4. How can I get my missing apps?

    Updated to an iphone 4s from iphone 4. Did backup and sync but some apps have not been copied to the 4s although they do show up on the iphone4. How can I get my missing apps?

    Download Past Purchases
    http://support.apple.com/kb/HT2519
    Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes...

  • How can I transfer some songs from my ipod to my itunes library although they are not purchased from itunes store?

    How can I transfer some songs from my ipod to my itunes library although they are not purchased from itunes store?

    By using one of third-party programs discussed in this previous discussion:
    Best iPod to PC

  • Can we create an Eloqua cookie for a user if we just know his email address and they have not clicked an email link or filled out an Eloqua form?

    Scenario:
    When a visitor comes to our website and creates a login, we are pushing their profile information to Eloqua via the Eloqua web services api. However, because they have not filled out an Eloqua form or clicked through an email, their page visit activity is not synced with their profile information in Eloqua because they don't have an Eloqua cookie yet (for first time visitors only).
    I know you can integrate an external form with an Eloqua form (which will then create the Eloqua cookie automatically) but because this is a login form for our website, we don't want to send secure information (such as passwords) over to Eloqua.
    Is there a way to create the Eloqua cookie using the web services api and/or javascript or is this a missing feature?

    I think what you're asking is how can you link a visitor profile to an Eloqua contact.  An Eloqua cookie is placed on a user's computer by the javascript tracking scripts - this is just a unique id that is used when saving the visitor information to a table in the Eloqua database.  It will be there regardless of whether the user comes from an email or submits a form.  What does happen when a user visits your website from an Eloqua email or submits a form is the visitor profile that has been keeping track of website activity in Eloqua gets linked to an Eloqua contact by email address.
    To make this link happen in your scenario, you can instead of pushing the information through the web services to Eloqua directly as a create contact call, create a form submission through the web services where you can pass through the elqCustomerGUID (the cookie value) along with at least an email address to make the link happen.
    You will need to:
    1. use javascript on your website to pull the elqCustomerGUID from eloqua.  There's code for this in the integration details for individual forms in Eloqua.  It has to be pulled from Eloqua servers because the cookie is a third party cookie.
    2. pass this cookie value to your server so you have it when you make the web services calls to Eloqua to push the contact information over and now make a form submission record (entities through the api Base->Form->*this will be a form submission record*) to create the link in Eloqua.

  • How can I see in my address book all contaacts that have not been placed into groups?

    How can I see in my address book the contacts that have not been put into groups?

    The best way to do that is create a new "smart group" with the following:
    This way you can identify those without a group and drag them to one.
    Regards,
    Captfred

  • I have a 27 inch iMac with maverick os.  my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9.  I can find the projects and they have a ".rcproject" file extension

    I have a 27 inch iMac with maverick os.  my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9.  I can find the projects and they have a ".rcproject" file extension

    Thank you GeeD. I'm still stymied.
    I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
    When I open iMovie 10.0.8, the Events and Projects Folders are empty:
    When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
    Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
    Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
    [As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
    Back to the update of version 9.0 to 9.0.9.
    Presumably because I have version 10.0.8 installed, I got this alert box:
    So, I cannot update version 9.0
    and I cannot "Update" the Events and Projects created in version 9.0.

  • I recently had to create a new profile, and thought I had backed up my bookmarks. They are now gone and I have not been able to restore them. Any chance they can be recovered? Thanks!

    I recently had to create a new profile, and thought I had backed up my bookmarks. They are now gone and I have not been able to restore them. ANy chance they can be recovered? Thanks!

    It is possible that you forgot to add a file extension (.json) while saving and in that case you may be looking for the wrong file.
    Also make sure that you search for hidden files and folder in case the file was saved in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    Firefox won't import the file without a .json file extension ("Can't process ..."), but you can create a backup with any name.

  • HT4113 I have followed all directions about restarting my ipod after it has locked, but they have not worked.  What can I do to fix the Ipod?

    I have followed all directions from the website to unlock my ipod when it states Ipod is disabled, but they have not worked.  Is there anything else I can do to unlock the Ipod?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • Wireless printer disconnecting from network

    Hello all, Here is my problem.  I have a new HP 3510 set up as a wireless printer on my home network.  I have three computers, two wired and one wireless.  I have a netgear router for 3G air card.  I can connect my printer to the network initially. 

  • Purchases different in MAS on 2nd Mac

    I have a Mac Pro and a MacBook Pro. Mac App Store account info is the same on both, although short user name is different. Purchases appearing in MAS on one computer are different than the other. Purchases on one computer are not appearing in MAS on

  • Selection color not working with table that has DefaultTableModel

    hi folks, I noticed if a table has a AbstractTableModel, when you select a row, by default the highlight color is light blue. However, if a table has a DefaultTableModel, even if you invoke table.setSelectionBackgroun(color) and table.setSelectionFor

  • Re: Upgradation

    Hi everybody .                I want details regarding upgradation project when you r upgrading from 4.6c to 6.0 Version what are outdated function modules & syntaxes what r the steps we have to follow . Very Urgent  Usefull Answers will be rewarded

  • No standard assignment defined for BP role category CRMACC

    Hi experts, Could you guys help me out. i am trying to assign a role CRMACC to my BP using the FM - BAPI_BUPA_ROLE_ADD but after the exceution of the FM, i get an error message: No standard assignment defined for BP role category CRMACC Could you guy