Can't load File
Hi,
I can't load the file back into the frame after I saved it as a .csv file. I would appreciate if you could point out the problem to me.
The code is at:
http://www.multiline.com.au/~wje/java/question.html
Thank you for your help
Andonny
can u tell me how did u colored ur code pls ?Check the link at the bottom of the page...
Similar Messages
-
I recently purchased an iPod and dl'd and installed iTunes. But when I tried to add my music folder into iTunes library, it runs an error message and auto closes.
Here's what's happening:
1. It opens that Adding Files dialog box and starts processing files
2. It opens the message box telling me that I have some .wma files, and I have the option of converting them to .aac
3. No matter if I hit "Convert" or "Skip", it runs for a few more seconds, then Windows pops up with an "iTunes has encountered a problem and needs to close" message.
I can load single files into the Library fine, but I can't load my full music folder into it.
What's going on?From what you posted, one file or album is perhaps messing up the whole import.
Try adding less files at once, instead of the entire folder.
What a pain, I know!
Maybe put the wma files in a separate folder?
Then add everthing else. -
Azure blob storage can not load file
I am trying to follow the MSDN tutorial on creating a container in blob storage and am getting the following error:
Additional information: Could not load file or assembly 'Microsoft.Data.Services.Client, Version=5.6.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I have tried numerous stack overflow suggestions such as this
one , to no avail. I have also tried uninstalling Azure storage, and re-installing it as well. Just in case it is helpful here is my test case for Azure storage:
public void TestCloudStorage()
CloudStorageAccount storageAccount = CloudStorageAccount.Parse(ConfigurationManager.AppSettings["StorageConnectionString"]);
CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient();
CloudBlobContainer container = blobClient.GetContainerReference("pictures");
container.CreateIfNotExists();
Thank you in advance for your help!HI
I know what happend, that's the Nuget Package error.
Azure Storage nuget package 3.0+ have this error.
My solution is use Azure nuget package 2.1+
1 delete all the dll reference for Azure storage (Or recreate a new project)
2 input below command in package Manager console
Install-Package
WindowsAzure.Storage -Version 2.1.0.4
That will resolve your problem absolutely .
Aslo you can refer to other peoples solution.
http://stackoverflow.com/questions/20457846/missing-microsoft-data-services-client-version-5-6-on-azure-websites
My Blog
Please use Make as Answer if my post solved your problem and use
Vote As Helpful if a post was useful. -
How can i load file into database from client-side to server-side
i want to upload file from client-side to server-side, i use the following code to load blob into database.
if the file is in the server-side, it can work, but if it in the client-side, it said that the system cannot find the file. i think it only will search the file is in the server-side or not, it will not search the client-side.
how can i solve it without upload the file to the server first, then load it into database??
try
ResultSet rset = null;
PreparedStatement pstmt =
conn.prepareStatement ("insert into docs values (? , EMPTY_BLOB())");
pstmt.setInt (1, docId);
pstmt.execute ();
// Open the destination blob:
pstmt.setInt (1, docId);
rset = pstmt.executeQuery (
"SELECT content FROM docs WHERE id = ? FOR UPDATE");
BLOB dest_lob = null;
if (rset.next()) {
dest_lob = ((OracleResultSet)rset).getBLOB (1);
// Declare a file handler for the input file
File binaryFile = new File (fileName);
FileInputStream istream = new FileInputStream (binaryFile);
// Create an OutputStram object to write the BLOB as a stream
OutputStream ostream = dest_lob.getBinaryOutputStream();
// Create a tempory buffer
byte[] buffer = new byte[1024];
int length = 0;
// Use the read() method to read the file to the byte
// array buffer, then use the write() method to write it to
// the BLOB.
while ((length = istream.read(buffer)) != -1)
ostream.write(buffer, 0, length);
pstmt.close();
// Close all streams and file handles:
istream.close();
ostream.flush();
ostream.close();
//dest_lob.close();
// Commit the transaction:
conn.commit();
conn.close();
} catch (SQLException e) {Hi,
Without some more details of the configuration, its difficult to know
what's happening here. For example, what do you mean by client side
and server side, and where are you running the upload Java application?
If you always run the application on the database server system, but can't
open the file on a different machine, then it sounds like a file protection
problem that isn't really connected with the database at all. That is to
say, if the new FileInputStream (binaryFile) statement fails, then its not
really a database problem, but a file protection issue. On the other hand,
I can't explain what's happening if you run the program on the same machine
as the document file (client machine), but you can't write the data to the
server, assuming the JDBC connection string is set correctly to connect to
the appropriate database server.
If you can provide some more information, we'll try to help.
Simon
null -
Can only load files to internet or email by searching for name, files don't show up in window
To anyone who can assist me,
When I go to load something onto the internet from my computer - let's say a movie to YouTube or a file into an email - it brings up the options menu (with my desktop and folders all available on the left hand menu) but doesn't ever show any files. It just shows a turning wheel and loads until you click out of it.
The only way it will show a file is if I repeat the process, but just start typing a file name into the search command. Shows up every time then. Thoughts?
Thanks!You have 'all items' selected at the top of the Kindle app ?
You can delete the book via the file sharing section in iTunes, just select it and press the delete button on your keyboard and you should get an option to delete it.
Have you tried emailing it to the email address that is associated with your kindle ereaders/apps ? Tap the cogwheel icon at the botton right of the Kindle screen to open its settings and you should see a email address - you can then try emailing the book to that and see if it appears on the device/cloud -
Newbie Here - Constant Crashing & Can't Load Files CS5.5
A complete newbie here....I have started a project, imported clips, everything works great. I edit my sequence, I've got a create basic edited video. I save the project. That was a great days work....
Now everytime I re-open a project, it sits there loading for what feels like eternity. The video never loads into the "program" viewing area, but I can see the clips and a thumbnail of the clips in the Sequence section below.
And then it crashes while trying to play the program, most of the time.
If it doesn't crash it's simply choppy and I cannot play the program still.
However, if I start from sratch, new project, load clips in, everything plays smoothly so I don't believe it is my hardware that's causing the problem. I'm getting tired of re-editing the same clips over and over.
Suggestions?Alright...I have some more info...I looked into the windows event viewer...
Application Error
Faulting application name: Adobe Premiere Pro.exe, version: 5.5.0.0,
Faulting module name: Display.dll, version: 5.5.0.0,
Exception code: 0xc0000005
Fault offset: 0x000000000008a928
Faulting process id: 0x1834
Faulting application start time: 0x01ce7d7d18e2ce4d
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS5.5\Adobe Premiere Pro.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CS5.5\Display.dll
Additionally there is the Hang Up and Close....
Application Hang
The program Adobe Premiere Pro.exe version 5.5.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 2598
Termination Time: 31
Application Path: C:\Program Files\Adobe\Adobe Premiere Pro CS5.5\Adobe Premiere Pro.exe -
Suddenly I can't drag files from explorer into audition anymore.
Hi any help on this would be greatly appreciated.
I was having some trouble with my m-track ASIO interface drivers so I went through some steps to try and fix this, and made some changes to audition and windows 7. I made some changes listed here http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=349411
anyway, none of it helped my issue, and to make matters worse now I cant just drag files from explorer windows into audition (which would usually load them in the menu on the left and place them into multitrack editor)
I can still load files through the open menu but this is pretty inefficient way of doing it.
Now I tried to reverse the changes I made but I still cant drag and drop into audition.
does anybody know what might cause this and how to fix it?
thanksWell, just finished my weekly podcast using Garageband and the "new and improved" iTunes. Here are the clunkers I've found:
1. Original problem of not being able to drag from iTunes to GarageBand. JamButty, I'll try out your workaround... for this show I literally had to drag all of the files I needed out of iTunes into a folder... Then why use iTunes at all?! Really stupid.
2. I noticed when I dragged the final show off of iTunes to a folder I use to upload to my S3 account, it now just has the black mp3 icon... not the image I use for the show. Granted, not a functional problem, but just stupid none the less why they would eliminate that.
3. Show notes in the metadata. Usually I'd copy my first paragraph of show notes (what goes on the web page) into Info > Comments in the metadata. And, if was too long, it would just chop off the end of it. This time I got a "bink" sound and nothing copied in. Tried it a couple of different ways with the same results until I figured out to just put half the copy in. Again, stupid, useless, time-consuming change.
I love Apple to death, but I hate what they do sometimes. The make a great product... then eventually screw it up with dumb changes (for example, the latest version of Final Cut) -
AIR 3.9 for android, how to load file in primordial worker
when i use AIR 3.9 for android version of my game, i can not load file in primordial worker swf.
I use the code below:
var loader : URLLoader = new URLLoader();
loader.dataFormat = URLLoaderDataFormat.BINARY;
loader.addEventListener(IOErrorEvent.IO_ERROR,
function (evt : IOErrorEvent) : void
trace("load file error: " + evt);
loader.addEventListener(Event.COMPLETE,
function (evt : Event) : void
trace("load file completed: " + evt);
loader.load(new URLRequest("./music/bgm/bgm_title.mp3"));
and already set the second parameter of "WorkerDomain.current.createWorker(swf:ByteArray, giveAppPrivileges:Boolean = false):Worker" giveAppPrivileges to be true.
this code can work on desktop AIR, but failed in android AIR, it tells a IOErrorEvent, and report "Stream Error".
So, is it a bug of AIR 3.9 for android, or is there somthing i missed?
Thank you very much for any help.Hi,
The bug 3643406 is fixed now and fix is avaialable in AIR 4.0 beta build. You can download the build from http://labs.adobe.com/downloads/air.html .
Please share your feedback with us.
Thanks,
Nimisha -
How can I load a .pst file to an instrument in logic express 9?
I have some instruments plug-in settings from my old computer that I used with logic, and I want to load them into logic so I can use them on the computer I moved them to. On any instrument I try (ES1, ES2, EXS24 and the rest) it won't allow me to load the files (.pst files) and I know I should be able to. Am I just going about it wrong or using the wrong instrument? How can I load these files so that I can use the instruments again?
Pages is not in a format compatible for what you want to do.
After you save a a Pages document, go to File > Export > and choose either Word or Pdf format. You can also choose RTF or PlainText too. Then you can email to yourself or others.
Good Luck.
Adam -
How can I load a flat file into a ZTABLE dynamically
I need to create a program which can Load a ZTABLE from a flat file structure (delimited and fixed options required). We have many ZTables where this will be required so I was hoping to do it dynamically somehow. Otherwise I will have to create one ABAP for every ZTable we have to load.
My Inputs should be
PARAMETERS: p_ztable TYPE ddobjname, "Z Table Name
p_infile(132) LOWER CASE, "File Name
p_delim(1). "Delimiter
I know that I can read the file by using gui_upload
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = c_infile
has_field_separator = p_delim
TABLES
data_tab = indata
EXCEPTIONS
file_open_error = 1
file_read_error = 2
OTHERS = 9.
I know that I can split the contents of this file (if a delimiter is used). However I will not know the actual field names of the table until runtime as to what to fields to split it into. In the example below I have the actual table (t_rec) and each of the fields (pernr, lgart, etc) in the code but each table I
need to load will be different – it will have a different # of fields as well.
FORM read_data_pc.
LOOP AT indata.
PERFORM splitdata USING indata.
APPEND t_rec.
CLEAR t_rec.
ENDLOOP.
ENDFORM.
FORM splitdata USING p_infile.
SPLIT p_infile AT p_delim INTO
t_rec-pernr "Employee #
t_rec-lgart "Wage Type
t_rec-begda "Effective date
t_rec-endda. "End date
ENDFORM.
Once I split the data into the fields then I can just look and insert the record.
Does anyone have any ideas? Specific code examples would be great if you do. Thx!!Hi janice,,
Try this sample code where you can upload data from a flat file into the internal table.
REPORT z_test.
TABLES: mara.
FIELD-SYMBOLS : <fs> .
DATA : fldname(50) TYPE c.
DATA : col TYPE i.
DATA : cmp LIKE TABLE OF rstrucinfo WITH HEADER LINE.
DATA: progname LIKE sy-repid,
dynnum LIKE sy-dynnr.
DATA itab TYPE TABLE OF alsmex_tabline WITH HEADER LINE.
DATA: BEGIN OF ZUPLOAD1_T OCCURS 0 ,
matnr like mara-matnr,
ersda like mara-ersda,
ernam like mara-ernam,
laeda like mara-laeda,
END OF ZUPLOAD1_T.
*DATA: ZUPLOAD1_T LIKE mara OCCURS 0 WITH HEADER LINE.
DATA: wa_data LIKE TABLE OF ZUPLOAD1_T WITH HEADER LINE.
selection-screen
SELECTION-SCREEN: BEGIN OF BLOCK blk WITH FRAME TITLE text-001.SELECTION-SCREEN : SKIP 1. PARAMETERS : p_file LIKE rlgrap-filename.SELECTION-SCREEN : SKIP 1.SELECTION-SCREEN : END OF BLOCK blk
. AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
F4 Value for File
CALL FUNCTION 'KD_GET_FILENAME_ON_F4' EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
static = 'X'
MASK = ' '
CHANGING file_name = p_file EXCEPTIONS mask_too_long = 1 OTHERS = 2
. IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING filename = P_FILE
i_begin_col = 1
i_begin_row = 1
i_end_col = 5
i_end_row = 12507
tables
intern = ITAB
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3. .
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GET_COMPONENT_LIST'
EXPORTING
program = SY-REPID
fieldname = 'ZMARA'
tables
components = CMP.
LOOP AT itab. AT NEW row.
IF sy-tabix = 1. APPEND ZUPLOAD1_T.
ENDIF.
ENDAT.
col = itab-col.
READ TABLE cmp INDEX col.
CONCATENATE 'ZUPLOAD1_T-' cmp-compname INTO fldname.
ASSIGN (fldname) TO <fs>.
<fs> = itab-COL.
APPEND ZUPLOAD1_T. ENDLOOP.
DELETE ZUPLOAD1_T where matnr eq space.
LOOP AT ZUPLOAD1_T INTO wa_data.
insert mara from wa_data .
WRITE: / ZUPLOAD1_T-matnr, 20 ZUPLOAD1_T-ersda , 45 ZUPLOAD1_T-ernam, 55 ZUPLOAD1_T-laeda.
*HERE IAM JUST CHECKING I NEED TO UPDATE A ZTABLE
ENDLOOP.
insert ZMARA FROM table itab ACCEPTING DUPLICATE KEYS.
I have tried it for mara.Please let me know whether it was helful.
Regards,
Kannan -
Can we load and unload the files in the run time?
Can we load and unload the files in the run time?
For example there are four files named "test1.h & test1.c" and another set "test2.h & test2.c" (I attached them as attachment to this post).
test1.h contains code:
int variable; //variable declared as integer
test1.c contains code:
variable = 1; //variable assigned a value
test1.h contains code:
char *variable; //variable declared as string
test1.c contains code:
variable = "EXAMPLE"; //variable assigned a string
So here, in this case can I dynamically load / unload the first & second group of files so that the same variable name "variable" can be used both as integer and string? And if yes, how is that to be done?
Solved!
Go to Solution.
Attachments:
test.zip 1 KBWhat do you mean by "dynamically"?
If you want to have a variable that either is an int or a char in the same program run, I'm afraid your only option is to define it as a variant and assign from time to time the proper data type in the variant according to some condition. Next, every time you access the variable you must firstly check which data type is stored in it, next access it in the proper way.
If on the other hand your option or to have a run in which the variable is an int, next you stop the program and in a following run it is a char, you may have it by using some appropriade preprocessor clause:
#ifdef CHAR_TYPE
#include "test1.h"; // variable defined as a char
#else
#include "test2.h"; // variable defined as int
#endif
Next, every time you want to access the variable you must proceed in the same vay:
#ifdef CHAR_TYPE
variable = "string";
#else
variable = 1;
#endif
Does it worth the effort?
Additionally, keep in mind that this "dynamical" approach can work only in the IDE, where you can properly #define your CHAR_TYPE or not depending on your wishes: when you compile the program, it will have only one #include depending on the definition of the macro.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Can I load xml file from SWC without using @embed
I'm developing a mobile application in which I need to load xml files from File.applicationDirectory. This works great if the xml files are part of the main application swf. But I would like to move these xml files into a SWC so they could be shared across multiple applications.
Using FlashBuilder 4.5, when a SWC is built, I can specify files to embed in the library that are not assets (Assets Tab of Flex Library Build Path). For various design reasons, I do NOT want to embed the xml files via @embed.
When the swc is built and I open it up using a zip utility, I see the xml files in there just fine. So they are being bundled with the SWC. But how can I load these files in my main application that does not involve using @embed? When the main application is built, the swc setting for link type is "merged into code".
I wouldn't expect the application to automatically pull out the xml files from the swc and place them in the File.applicationDirectory on the mobile device. I've tried loading from there just in case but file.exists is false (as expected).
I've searched the web (and continue to do so) and all the answers seem to be to use @embed. Is there another way?
RandyIt's actually a lot easier than you think.
Just reference the file like any'ol URL using a path relative to the SWC's src directory.
So if you include the file "assets/xml/some.xml", just use that same string like you would any remote resource.
For example:
var loader:URLLoader = new URLLoader( new URLRequest("assets/xml/some.xml"));
I believe it would also work like this "/assets/xml/some.xml", but I prefer relative paths so the link doesnt break if moved out of the SWC... -
How can i load Client side XML file to Table
Hi,
How can i load the all the XML files (near 10,000 files) available in client machine to the XML table .
I did try with directrory list in the Webutility demo form, but when the number of file is near to 1,500 its giving error.
Please suggest the best method to implement my requirements.
1. XML fies are in a folder in end users machine(Windows OS)
2. I need to load all the XML files to table (Oracle Database is in Unix)
I am using forms 10g
Thanks in advance.
RizlyHi,
What is the error you are getting when you reach 1,500 records? Can you post it? You mentioned you are using the webutil to load them. How you are loading? From the client machine you are loading to the database directly? Can you post the code you are using for that?
-Arun -
Whwn I want to close Firefox 9.x , a pop-up appears with the message: "Can't load resource file ......" . First I have to close this pop-up, then Firefox is closed. Also with other versions of Firefox I had this problem.
i deleted the rdf and now the first window only (and any tabs in it) are maximised. i found this in the rdf
<RDF:Description RDF:about="chrome://browser/content/browser.xul#main-window"
screenX="4"
screenY="4"
width="1008"
height="461"
sizemode="Normal" />
i tried changing normal to maximised; no effect. either i need also to change the numbers (to match a maximised window) or ff ignores this. i want to be able to open different sites in different windows, and not have to maximise them manually. ff never used to be broken, why break this? what possible security flaw was fixed by screwing up ff to never open maximised unless u hack it or delete certain config files? -
After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.
Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN
Maybe you are looking for
-
Finding proper A/B video switch for the imacs
I am a new convert and I have 2 imacs that are used at my church. I am currently using one for the video feed to our projectors with the mini DVI to VGA cable. I want to be able to use both imacs, but the imacs are having trouble finding a signal thr
-
How to deactive my account on another hard drive on the same computer
I got a new computer but I need both uses for lap top at school and computer at home, I got my old hard drive put in the new computer figuring it would work still, but it will not launch. Any suggestions? Thanks.
-
Downgrade rom bex7.0 to 3.5 urgent
hello, I need urgent help. Does anyone know a way downgrading a query to Bex 3.5 , that is migrated to the bex 7.0 before? regards
-
Control a mc timeline from the main timeline
Hi there, On my main timeline, I load a mc from the library with: text_content.attachMovie("text_content", "text_content", 10); There is a marker inside this mc called "news". I need a script in the main timeline that will gotoandStop "news" within t
-
How to recieve emails in imessage?
How I can recieve emails in my imessage?