Can't remove clip

I can't kill it!
I have a library clip with a window UI object in it. I place
the attached code into the window.
Now another script attaches the said clip into the storyline.
When I click the 'close' button, it says "clicked" and tells me the
object I'm trying to remove does exist. But it doesn't go away.
Is it me or are windows evil?

components are evil.
in this situation you're using a v2 component that occupies
the greatest depth (2**20) at which movieclips can be removed using
actionscript. you then instantiated _root.view_mc and set its depth
using getNextHighestDepth() which placed it at a non-removable
depth.
to remedy, use swapDepths() to move it down to a removable
depth (anything between 0 and 2**20 that's not already occupied).
or, maybe you placed view_mc on-stage in the authoring
environment so it has a depth of about -2**14 which isn't removable
either.
again, to remedy, use swapDepths to move it to a removable
depth.

Similar Messages

  • I want to remove clips from the event browser. How?

    How can I remove clips from the event browser in iMovie 11 when I have finished using them - without deleting or rejecting them?

    I'm not clear why do you want to remove them if its not to save space by deleting them?  
    Geoff

  • My Mac G-4 OS X will not image an icon of the zip disk with I inserted into my computer's built-in Zip Drive, therefore I can not remove the zip disk from my computer.  What can I do?

    My Mac G-4 OS X will not image an icon of the zip disk with I inserted into my computer's built-in Zip Drive, therefore I can not remove the zip disk from my computer.  What can I do?

    Thanks Old Comm Guy, BD Aquam and Texas Mac Man for youradvice and reply to my question
    and problem with my Zip Drive.  However:
        1.  Depressing mouse buttonon start up did not eject the zip disk.
        2.  To examine front of zipdrive, I had to remove many screws and several plastic case
             coverings.  Upon doing thatI discovered that, unfortunately, there is no whole in front
              of mybuilt-in zip hardware drive for me to insert a paper clip to manually eject zipdisk.
          3.  I went to the Utilities folder in myMac OS X Application folder, but I could not find
               theiomega zip drive in there.
    Also, I did go into my "9" System folder and thento the Extensions folder within it and did find an icon of an
    Iomega Driver. When double clicking on it a window came upstating I was opening the application
    "ColorSync Extension" for thefirst time, and asking if I was sure I wanted to open this application.
    Uponclicking open nothing happened - nothing opened.
    I also went into the "System X" folder>Libraryfolder>Extension folder>IomegaSAM.ket icon and double
    clicked on it and asmall window opened stating "Compiling file List", however nothingopened it just
    continued to compile, so I closed it.
    Within my Mac OS X HD>  Applications>Iomega folder>Iomega Tools.app a smallwindow opened up
    with several options (Erase, Protect, Disk Info and DriveInfo). Clicking on the Drive Info a message says:
    "No Iomega Drives or noIomega Driver found.  Therefore, Ihave gone to Mac, Iomega and other websites
    trying to find a Driver for thebuilt-in Zip Drive in my Mac G-4 OS X 10.4.11, but have not really found anythat work.
    CAN ANYONE TELL ME IF THERE IS A WEBSITE WHERE I CANDOWNLOAD A NEW DRIVER FOR MY ZIP DRIVE?
    Thanks,     Peterfromcrystallake

  • How can I remove an object using Photoshop Elements 7?

    How can I remove an object using Photoshop Elements 7?

    You could probably use the 8 point garbage matte in this situation. I personally think the 8-point garbage matte is a bit cumbersome, but it should get the job done.
    1. Use the Razor Blade tool to place a cut before and after the shot with the bottle.
    2. Select the bottle clip.
    3. Press and hold Shift + Option, then drag the bottle clip up one track. This should create a duplicate clip directly above your original clip. (I'll refer to this duplicated clip as bottle2.)
    4. Locate the 8-point Garbage Matte filter and apply it to bottle2.
    5. Locate the Gaussian Blur filter and apply it to bottle2.
    6. Control click bottle1, and uncheck the "Clip Enable" setting from the shortcut menu. This will disable that clip.
    7. Double click bottle2 to load it into the Viewer. Then select the Filter tab.
    8. For the Garbage Matte filter, you'll notice 8 rows of numbers, these are the current locations for the control points, which you should be able to see in the Canvas. Start with point #1, and click the "+" button in the filters area, then in the Canvas click and drag to move the point. When you release the mouse button, you'll need to reclick the "+" button in the filters tab. Repeat these steps until you've isolated the bottle.
    9. Feather the edge of the matte.
    10. Adjust the Blur amount.
    11. Reenable bottle1. Playback the clip and make any necessary adjustments.
    Depending on your experience with Motion, you might also want to try sending bottle1 to Motion, then use Motion to control the layering.

  • Can't reject clips from IMovie anymore, what did I do?

    In the bottom section when I highlight and click on reject clip, it does nothing.  Was working fine, until recently.  Did I push something?  Anyone know how to fix this, beginning to be a real pain when I can't remove it.  Stays there even when I start a new project.  Please help!

    https://discussions.apple.com/community/ilife/imovie

  • Best way to remove clipping

    What is the best way to remove clipping?  I have tried
    effects/restoration/clip restoration(process) and...
    In some cases. it does not remove the distortion, although the graph of the sound wave "looks good".  I have just tried the presets.  Any suggestions?
    Thanks.

    Steve C2 wrote: In some cases. it does not remove the distortion, although the graph of the sound wave "looks good".  I have just tried the presets.  Any suggestions?
    Not really - and it's not really surprising that this doesn't work in all cases; in fact it's quite surprising that it works at all, in many ways. Clearly, the worse the clipping the less information there will be about missing peaks, and when the clipping gets to the point where distortion is audible, then quite a lot of reconstruction data simply isn't there for the software to make guesses about - so no cure for it is possible.
    A single peak isn't too difficult to reconstruct - you have the slope of the waveform either side of it, and all you have to do is work out where the intercept points of the two slopes are, and that will effectively rebuild it - probably quite accurately. But the moment your clipped signal effectively encloses two or more peaks, especially if they are part of an extended harmonic, then reconstruction can actually make the distortion that you will inevitably get, worse. This is because the software only attempts to reconstruct the waveform from the slopes either side of the clip, (all the information it has) and any harmonic information that should have been there gets altered, to all intents and purposes - hence the increased distortion.

  • Can I remove my scratch directory?

    I just got a big external drive (2TB). Looking around to cleanup and consolidate my other drives (external and internal) I found a folder on my internal drive named "FCP Scratch". I also found one on one of my other external drives named "FinalCut Scratch". What I want to know is, can I remove these and create a new scratch on the 2TB drive instead? If I remove these directories will this cause me any trouble? I haven't used FCE in over a year. If I have a project that I haven't completed yet, will removing these folders mess up these projects. Can I open the projects and point to a new scratch location? Will it move the old information, or is this just left over junk?
    Thanks

    You do not need to save the entire scratch directory.
    What you need to save is your _FCE project file_ and any/all _source media files_ associated with it (video clips, audio files, photos, etc). There will be one FCE project file for each of your projects, normally found in your +Final Cut Express Documents+ folder.
    Your captured clips are normally stored in the +Final Cut Express Documents/Capture Scratch folder.+ Audio & stills are wherever you saved them on your hard drive.
    It's also a good idea to save at least the most recent 2-3 project backup files that are in your +Final Cut Express Documents/Autosave Vault+ folder.
    There is no need to save anything in the render files, waveform or thumbnail cache folders.
    In your case, change your FCE Scratch Disk location (in FCE) to the new drive. Then copy the appropriate files (project files + media) from your other two scratch folders into the corresponding folders on the new drive. (But DO NOT copy anything in the +render files, waveform cache or thumbnail cache+ folders).
    Important - after you have copied all to your new drive, remove the files/folders from your old drives. (I would +back them up+ first (just for safety) and then delete them - make sure to empty the trash, too.) After doing this, when you open the project the next time you will be prompted to reconnect media - just follow the prompts and point to the correct folders on your new drive and things should be fine (as long as you copied the necessary projects & media files to the new drive)

  • How can I remove my account on an iPad and add an existing one

    how can I remove my account on an iPad and add an existing one

    Or, how can I change the account on an existing iPad without restoring / formatting it?

  • How can I remove LABELS from my gmail account?

    How can I remove unwanted LABELS from the side bar unsung gmail?

    I assume you're using GMail as your primary e-mail account?  Try this.  This is how I am setup.  Not only will it move all your contacts to your phone but any changes made in GMail or on the iPhone will be sync'd with the server.
    http://www.google.com/support/mobile/bin/answer.py?answer=138740
    Note... I think this will delete your existing contacts from your device.  You will want to use iTunes to back them up and get them imported into GMail before you sync your device wtih GMail.

  • How can we remove the scroll bars from the table?

    Hi,
    I have a dynamic table. Currently the table appears with the scroll bars. But there is a requirement that the scroll bar should not appear and the table should stretch in the entire page. How can this be achieved.
    Thanks in advance
    Nita

    Thanks Mohammad for the reply.
    Was able to remove the scroll bars by using only the styleClass as AFStretchWidth. But there is a default partition in middle of the page still? Can i remove that too by any way.

  • How can we remove the following zeros from quantity field ?

    Hi All.
    how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
    eg:getting output zqty = 2.000
    but i need           zqty = 2.
    help me to reslove this issue.
    Regards.
    jay

    Hi,
      While populating the field catlog do the following thing to   avoid zeros.
      wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
      wa_fieldcat-fieldname = 'FWAER'.
      wa_fieldcat-seltext_l = text-023.
      wa_fieldcat-no_zero = 'X'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR  wa_fieldcat.
    Thanks,
    Khushbu.

  • How can we remove asterix from the amount

    i have problem wen i am trying to get amount it uis coming in this manner
    ***100000**
    how can i remove it
    pls let me know

    Here is one logic:
    data text type string.
    text = '**1000**'.
    replace all occurrences of '*' in text with ''.
    write text.
    Check out this link too:
    do not want asterix to be padded in left of currency value..
    Hope it helps you.

  • Can't remove my credit card from account.

    Why i can't remove my credit card from my account. when i remove credit card (select none)already after abt 5-10 min i check my account again my creditcardd will be appear. I try to remove from PC and on my iphone.

    Answered here:
    https://discussions.apple.com/message/24655077#24655077
    So, either do as directed, or don't get anything from the iTunes/app store.

  • How can we remove the key from the dataset which has json

    uid
    id
    Json
    4588
    51
    { "key": "1/0/234", "element1":{ "a":10 "b": "test1" } }
    4589
    52
    { "key": "1/0/234", "element1":{ "a":10 "b": "test1" } }
    4590
    53
    { "key": "1/0/234", "element1":{ "a":10 "b": "test1" } }
    I have the above dataset resulting from merge operation .
    UID -Integer data type
    ID- Integer data type
    Json- String data type holding json document
    How can I remove  the " key" element from the json field  and make my dataset look like 
    Expected output which will strip of key value pair from the json column
    uid
    id
    Json
    4588
    51
    { "element1":{ "a":10 "b": "test1" } }
    4589
    52
    { "element1":{ "a":10 "b": "test1" } }
    4590
    53
    { "element1":{ "a":10 "b": "test1" } }
    Mudassar

    Hello Mudassar,
    In SQL Server / T-SQL we don't have a native JSON support, so you would have to implement a solution on your own = parsing the string and remove the "Key" + it's value.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How can we remove the commas from the Formula value in SAP BW BEx query

    Hi All,
    How can we remove the commas from the Formula value in SAP BW BEx query
    We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
    Regards
    Venkat.

    Do you want to remove the commas when you run the query on Bex Web or in RSRT?
    Regards

Maybe you are looking for