Can't see data in Preview View

Note that I have posted this in the following thread:
Forum post in Suggestions and Comments: Where is the Tech Support for Crystal Reports Where is the Tech Support for Crystal Reports
Where is the technical support for Crystal Reports? I have just been through one of the worst technical supports circles in my entire career - this phone# to that phone# and only to be told you cannot talk to a Tech Support person. My dilema for anyone that can help - I am using Crystal Report 2008. I have mapped to a database in MS Access 2002. I copied the database to my desktop and created a test report. I can see the fields in the Field Explorer. I have dragged the fields onto the report and they are visible in Design View. I can see the data in the fields when I browse the fields. In the Preview View I do not see any data what-so-ever. I have not changed any defaults and have not suppressed or hidden information. The $1M question: Why can't I see the data on my report? I never had the problem when I used Crystal Reports v8.

The supported platforms document for CR2008 (R3) states that Access 2003 and above are supported but you should still be able to see data.
What happens if you go to the last page of your report (or scroll through the pages)? Do you still see no data? (I'm thinking maybe some null values in your data may be the reason for nothing showing on the first page.)
Connecting natively or ODBC?
Still have your sample data (xtreme.mdb) from CR8? See if you can hit that successfully.

Similar Messages

Why can I see photos in photo view, but now event view?

Why can I see photos in photo view, but not in event view. The event shows up, but when I open the event, it says there are no photos in the event. The only way I can actually open a photo in the event is to be in photo view, and open the photo from that view.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Can we get data from business views in CR 2008/XI?

Hi All,
Can we get data from business views in CR 2008/XI?
If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
Thank you,
Krishna Pingali

Hi Krishna,
Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
Contact our Sales department for pricing and availability.
Thank you
Don

Can't see data in data tab when there is a "." in table name

Hi,
I have a problem with SQL Developer 2.1 (this works with 1.5).
When there is a dot (".") in table name, we can't see data in data tab (we have no synonyms so it's not same bug).
If I try to export data on same table, in "WHERE" tab, I can see sample !
Any idea ?
Thanks

logged
Bug 9393866 - datatb shows no columns for table name containg [dot]
-Raghu

Can't see data in data tab - sql server 2005

hello,
i am connected to a sql server 2005 database (with jtds driver), the connection is ok, i see the tables but i can't see data in data tab.
i have an error : incorrect syntax
somebody can help me ?
thank's in advance
alex

definitely. I was going to say, make sure you have the privileges to read data.
From Microsoft SQL Server 2000 on, it is recommended that you are a member of the db_datareader - so that data in the database can be read
Barry

How can I see date and time of a imovie event (new imovie 10.0.4). Thank you for your answer and greetings from switzerland.

How can I see Date and Time of an event in iMovie 10.0.4?
Thank you for your answer.
greetings from Switzerland

Managing Profiles
http://support.mozilla.com/en-US/kb/Managing-profiles

FCP X 10.0.8 I can´t see the effect preview in the viewer...

Hi:
I update Final Cut Pro X today and now I can´t see the preview of the effect in the viewer when I use the skimmer in the effects thumbnails in the Effects tab.
You konw... if you move the skimmer over the effect thumnail you can see the effect apply or if you hold "alt" key and move the cursor you can change the "amount" of effect to see.
I check to reinstall the app, erase the renders...

Thanks Russ.
I am going your advice and install the Preference Manager (Great stuff from Digital Rebellion) and I deleted the "preferences plist".
I go to open FCPX again and this issue whit the thumbnails in the viewer is remained.
This is madness.
I am going to check my other Mac and install the update to check if the problem is in FCP X or my Mac Pro.
Thankas again Russ
All effects show this issues. White frames, pink frames... I can´t see the preview in the viewer or the thumbnail.
This computer is a Mac Pro 8 Core, 32G Ram, Nvidia GTX 285 GTX Mac Version...
Two days ago I finish a work with 10.0.7 FCP X version and all is ok, I haven´t this issue.

I can not see data in data viewer

Hi,
I use OWB 10g Relase 2. I have one table and I imported table metadata to OWB. I load data to table with pl/sql script, Now I do not see data in this table in data viewer. I see data in SQL*PLUS
I tried deploy table and run script to load again. Same problem.
I run mapping from this table. But target object is empty as well.
Thanks for advice
Jerry

my fail, I forgot commit transaction

Can't see data in InfoSet

All,
I'm having an issue with several InfoSets that I created. When I first created the InfoSets I was able to view data with not problem. But now that I've loaded some new data and in some cases completely reloaded all of the data to my InfoProviders, I'm getting a warning saying:
     The data from the InfoProvider NAPM_IS05 involved could not be checked
     Message no. DBMAN242
     Diagnosis
     A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
As a result I can't see any data in my InfoSet even though I know there is active data in my InfoProviders. This particular InfoSet contains 2 InfoCubes. I've searched around and there are others with this same issue, but I haven't found a solution yet. Any help would be much appreciated.
Thank you,
Anthony

Refer Note 1364083 - Nachrichtentext wird unerwartet in Oberfläche angezeigt
Translated in English:
"The data from the participating information provider could not be verified." and the long text: "A participating provider information is virtual, an agreement of the results with the selections can not be guaranteed." appears in the application, which is not desired, as it is typed as an information and should be suppressed.

How Can i Read data From Maintainance View

I Want read data from Maintainance View. i written select query
SELECT *
FROM J_1yyyyV
INTO TABLE GT_BUSPLACE.
WHERE BUPLA = LV_BUPLA.
this is giving following error
"J_1yyyyV" is not defined in the ABAP Dictionary as a table,
projection view, or database view.
Can you help me Please.
Thanks in Advance.
Regards,
Raj.

Hi raj,
maintainance view is a nothing but combinations of table using join on some fields..
see the relation ship between the joins..
if you want to write selection query ..go to se11 -->enter view name >and open tab>
Table/Join conditions--> see the table's involved and join conditons between tables.
and write the select query same as like the Table/Join conditions in se11..now you can acheive the
table maintainance fields..
Prabhudas

Can not update data in table view

When i open a table from a connection in the connection navigator i can not alter the data in it... I can only add new rows. Is there a setting so i can alter the data?
My user has update rights because when i write my own update statement and execute it, it works fine.

I found the issue... You can do it in 10g but you have to define a PK on the table, otherwhise he does not know what row to update. When i added a PK i could edit the data in Jdev in data view.

Can't load data through smart view (ad hoc analysis)

Hi,
There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
Check in EAS whether those filters are created with "Write" permissions.
Regards
Celvin
http://www.orahyplabs.com

Help-can't see (canvas) item in viewer

Hi
I'm trying to position an 8 point garbage matte by use of the canvas, but can't see the positions because I can't see the item in the viewer while I am on the controls page in the canvas
please excude dumb qstn, what am I doing wrong, how can i get it to show in viewer?
thanks : )

Hi(Bonjour)!
Not sure to understand your question, but you can "tear" the filter tab from viewer window and position it anywhere on your screen. Be sure to double-clic the clip with the garbage matte applied to open it in viewer before tearing the filter tab.
There also a local menu in this filter that allows to "see" either your garbage matte, source material, composition in the canvas.
Michel Boissonneault

Can't see audio wave in viewer after FCP5 project updated into FCP2

After updating my project from old FCP 5 version running on Tiger to FCP2 running on Leopard, I can't see the audio wave picture inthe viewer window. Is there an explanation for this?
Thanks assistance.
Ray

You can try clearing the waveform cache in your project folder. Press Shift Q to open the System Preferences window. Look for the location that is set as your Waveform Cache location, then use the Finder to navigate to that folder. Remove the cache files from there, and then try relaunching your project to see if that solves your issue.

I can't see my clip in viewer

Hi Guys
Can you help please?
I'm using Speedgrade CC
Windows 7, Service Pack 1 64 Bit
8 Gb Ram
Intel HD Graphics 3000 Card
I can't see my clip in the viewer, although I think that there may be a tiny represetation of it in the bottom left hand corner of the view. (Resizing doesn't help)
Can any of you boffins shed a bit of light please?
Here's a screen shot. Hope it helps.
Thanks for you help.
Simon

Thank you guys but unfortunately neither of those fixes worked. Having done some more research I can see that others have had an identical problem. However, it looks like those with my graphics card didn't manage to find a solution. http://forums.adobe.com/message/4488205
Ho hum. I really don't want to have to buy a new PC but I guess that may be the only options, as it's not possible to upgrade the graphics card on my laptop.
Really appreciate your efforts though.

Can't see data in Preview View

Similar Messages

Maybe you are looking for