Can't see my printers ... jst installed Snow Leopard

can't see my printers ... jst installed Snow Leopard

Sig
My HP 2100TN worked with system 10.5 ... Now with 10.6 there is no way to add another printer
Also I have an HP Photosmart C6280 scanner / inkjet that only shows off line ... It prints directly with the USB connection but not through the wireless network.
Also I bought a Mac pro laptop for my son last year and never did get the Laserjet 2100TN to work ... now with updated syytem software neither of us can see the printer
Apple's support and instruction on this using Bonjour is very very poor

Similar Messages

I can't use my MacBook after installing snow leopard

I have just installed snow leopard. I have been using it briefly but after re booting I cannot get beyond the log in. It shows the desktop but then sends me back to log in again. I have booked into the genius bar but that is in on Friday afternoon. Any suggestions as have 5 days to try and resolve it .
Thanks in anticipation.

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Lion can't see Time Machine drive that Snow Leopard does

We just set up a backup system for our group. It's a 8 Tb Pegasus drive attached to a Mac Mini Server. I have set up 4 Macs running Snow Leopard with no problems at all. Two systems are running Lion and I can not get Time Machine to see the backup drive. We are connecting via AFP on a network.
Any ideas or remedies? Thanks!

If I'm understanding correctly, your 4 SL machines work fine with the drive. Your Lion machines do not seem to able to see the drive in TM.
But your Mini server is a Lion server correct? It can browse and backup to the Pegasus on its own right?
The link Linc cited is related to an issue with older storage devices that use legacy AFP and no longer work properly with Lion machines. Even if the legacy is enabled you can only browse the drive and can set the drive for TM, but will not be allowed to use it for TM (TM errors will say as much). But this Promise Pegasus? is a brand new Thunderbolt using product entirely which subsequently makes me think that can't be the case at all.
Random thoughts:
How about LAN traffic firewall? Any chance you have the AFP port blocked internally?
I briefly flipped through a manual on the Pegasus... and it doesn't even offer any hints on time machine or shared usage. I guess there isn't anything particular on the disk side to do besides plug it in and the disk arrangements.
OS side... buggy sharepoint setups? TM usage is a selectable function for any particular sharepoint. I'm not sure how you are setting it, but have you tried to create a sharepoint on the Pegasus (a folder stored on it and not the root) and share it out with TM allowed? You should be able to see that at least.

Can I install Snow Leopard on a new partition on a Macbook Pro (Late 2011)?

I need to get Pro Tools 9 up and running again after I migrated from PC to Mac, but I know that Pro Tools 9 doesnt work with Lion.. I dont have the money to upgrade to PT10 so my thought was to go downgrade to Snow Leopard to get it working. But I dont want to leave Lion, so my question is if I can make a new partition and install Snow Leopard on the new partition and have both OSs bootable?
The guy in the store I bought my mac from said Snow Leopard probably wouldnt play nice with the mac since its adapted to Lion but I dont trust people that get money for preaching about the constant need for "the latest". So I thought I'd ask the experts instead, so here I am! What do you guys think?

theoretically, it should work - but the guy at the Apple Store is correct....computers that ship with the latest operating system do not support being downgraded.
You might not get past the spinning beach ball & gray screen if you try to boot from the Snow Leopard install disc.
It's worth a shot though if you want to try it. Just don't try to 'downgrade' the current Lion installation back to Snow Leopard. Try instead to create a new partition specifically for Snow Leopard. Disk Utility - select the top HD (probably reads Hitachi something)...select it, click on the Partition tab. Select the top partition, and you should then be able to see the + so you can add a new partition. I would probably make it about 20GB give or take depending on how much space you think you will need - but i believe the Snow Leopard installation by itself takes up around 8-10GB.
Once this partition is created, insert your Snow Leopard installation disc, restart the computer and hold the C key down to start from the install disc. When it walks you through the steps for installation, select the newly created Snow Leopard partition. Install. Be sure to go through all the Software Updates (numerous times) after the installation is done.
You can select which startup disc you want to boot from by holding the Option button down at startup until you see the gray startup manager that shows your Lion partition, Recovery Disc partiton, and your Snow Leopard partition.
If for whatever reason this doesn't work, simply just erase the partition. It likely will not work but you should be able to just erase that newly created partition without any other problems.

Can I wipe my 2012 Mini and install Snow Leopard

I have years of apps, and files on my backup Time Machine using Snow Leopard, can I wipe Mountain Lion and install Snow Leopard?

Running Snow Leopard (with Rosetta) in Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

Can't install snow leopard on partition after upgrading to lion

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMay

Hi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay

Can't install Snow Leopard to iMac

When I try installing snow leopard on my iMac I get the message, can't install this disc currently used for time machine backups (the disc is the iMac's internal hard drive). I tried installing with the computer already on and by booting directly from the install disc and get the same message.

applefangirl, SL won't install on any disk that contains a "backupd" subdirectory. It thinks your TM backups are on this disk. If your backups are elsewhere, which they probably are, than delete this subdirectory on disk and SL will install.
Verify that you have backups elsewhere first!!!
See: http://support.apple.com/kb/TS2986
Cheers

Can't install Snow Leopard on a MacBook

Hi guys...
A friend of mine brought me his Macbook to fix it because the hard drive was making sounds and now won't boot.
The drive in fact is bad, it barely mount, makes noises, etc.
I've replaced the internal hard drive for a Toshiba 320gb SATA 3.
The thing is that apparently the DVD doesn't recognize my drive and of course, i can't install Snow Leopard.
My question is, is this a problem with the new drive?. I believe that being a SATA3 could be causing the problem.
Second question... Can i install Snow Leopard (somehow) using my Mac mini?
Thanks so much and i hope you can help me.
Regards.
Francisco.

Hi!!
>I've used another internal hard drive and installs correctly<
Using the DVD installer?
Yes
So it boots with another hard drive in there but ejects when you put the Toshiba in there?
Yes but it only make sense if the DVD would create a temporary partition or something in order to install the OS.
>Could it be that the drive is SATA3? <
Even so it would be downwards compatible.
I though so too
>or maybe the hd is bad?<
That would make more sense.
I'm going to clone the installation that went OK in order to see if it's actually my internal drive the problem.
Could it be the manufacturer?
Thanks so much and i'll let you know.
Regards.
Francisco.

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details.

How do I create more room on my MacBook Pro so I can install Snow Leopard? It says it needs 5GB and I have 4.something.

How do I create more room on my MacBook Pro so I can install Snow Leopard?
I've only got 4.something GB left and it says it needs 5 GB?
Which then begs the question, will I be able to do anything with the computer.
I think I need to get some stuff off, but do not know where to look up what is taking up the most room.
I have an extra hard drive.
I have iDisk.
I have a Time Machine, but it backs up one of my three Macs.
Thanks.

A utility like GrandPerspective is a good one for seeing what is taking up space on your hard drive.
Video and photo files tend to take up a lot of room.

Can I install snow leopard on an external hard drive so I can run quicken 2006, and put snow leopard on my imac harddrive

Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?

You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.)

Can I install Snow Leopard with an external disk drive?

I have been trying to update my software to Snow Leopard but I am using an external disk drive and when I try to install the software I get the message "The application 'Install Mac OS X' cannot be used from this volume". Is there any way to fix this problem?

Are you booting your computer from an external drive? If so please say why? How are you trying to upgrade to Snow Leopard? Do you have the 10.6.3 retail Snow Leopard DVD? On what drive are you trying to install Snow Leopard? Are you doing this?
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Install Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with installing OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. Then use Software Update to download and install any other needed updates for Snow Leopard.

Can I install Snow Leopard and boot from software RAID 1 (mirror)?

I have a Mac Pro (quad core 2.66 GHz) on order for my office workstation. Yeah, I know new ones are probably coming out early next year but due to budget and upcoming projects I need one now. What I'd like to do is replace the pre-installed 640GB drive with two 1 TB drives and mirror them. The 640GB drive will be redeployed to another machine in the office. Can I boot from the Snow Leopard install DVD, go to Disk Utility, setup a RAID 1 with the two drives, install Snow Leopard to the mirror and then boot off the mirror set?
I've searched and found offhand comments to the effect that installing to and booting from a software mirror is OK, but I'd like to know for sure that it's OK. Any experience that you have with such a configuration would be nice to hear.

Yes. But before you do read the following:
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison>.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons
Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. How can I get my scanner to work?

I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1. How can I get my scanner to work?

Check here to see if there is an updated driver available for it:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Can't open Word or Quark Xrpress after installing Snow Leopard 10.6.8

A few days ago (30th jan), I Installed Snow Leopard 10.6.3 & then it updated to 10.6.8. When I tried to open Word 10.1.0 (2002 version) it opens a blank page but doesn't allow me to save it. If I open an exisiting file Word shuts down. Ssame with Quark Xpress 6.50...

Security Update 2012-001 Bricks Rosetta programs
Restore method.
#1 Backup your personal data off the machine.
Backup files off the computer (not TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. That's all you need to do at this time, disconnect all drives now to prevent mistakes.
#2 Try Restoring from a TimeMachine or option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
#3 Reinstall OS X 10.6 from disk
If no TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility to >Repair Disk and Permissions (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If you get gray screen at any time when booting (possible it might occur when you reinstall old programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
Further Reading below:
#6 Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone here
http://www.bombich.com/get_ready_for_lion.html
TM help here
http://pondini.org/OSX/Home.html
#7 Make copies of your original Snow Leopard
Learn how to make copies of your 10.6 disks here
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
#8 Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible with Lion
http://roaringapps.com/apps:table
#9 Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
https://support.apple.com/kb/TS2570
If at any time you feel this is beyond your capability, please seek local professional assistance before you lose your data.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good luck
<Edited by Host>

Can't see my printers ... jst installed Snow Leopard

Similar Messages

Maybe you are looking for