Can't see the deployed BPM application in BPM Workspace

Hi Guys !
I've created a BPM application, deployed it succesfully ( the message was 'deployment finished' ) and now I want to launch it.
I can login in BPM workspace, but in my Inbox I don't see any active application.
I read about adding 'weblogic' to BPMWorkspaceAdmin role.
I don't have the BPMWorkspaceAdmin role.
I added 'weblogic' to BPMWorkflowAdmin.
What else to do ?
Many thanks,
Gabi

Hello Gabi,
I just figured out the solution to my problem. Actually, that doesn't seem to be related to PS6. A collegue told me that something similar also was an issue in previous jDeveloper releases. The problem is that jDev is not able to save the new name if you renamed the default process role "Role" to something else, eg. "Requester". The solution is to add a new role and just delete the default process role called "Role".
To check this, go to the Organizsation preferences of your project in jDev (jDev > BPM Project Navigator > <YourProject> > Organization > Roles) and compare the process roles to the process roles of the deployed project in the BPM Workspace (in your browser, open <yourURL>:7001/bpm/workspace > Login as administrator (usually user "weblogic" + password "welcome1") > Administration on the upper right > Organization > Roles)
You might find the role "<YourProject>.Role" there which you thought have renamed in jDev earlier.
I hope this helps.
Greetz
Knud

Similar Messages

BPM Enterprise - Can's see the Deploy

Hello all
I am new to BPM and i am trying to deploy into bpm enterprise and i hope somebody could help me
I have installed and configured everything needed (weblogic server, bpm enterprise, bpm studio) and i configured and i have created a bpm directory service, bpm domain, etc (using the configuration wizard)
I am trying to deploy a sample proyect. I followed the admin guid and i deployed using Process Administrator --> Proyects, deploy etc (i used the option smart publish)
How can i access my deployed application???
I accessed to workspace application (using the admin account so that i have admin privileges and i can see all the deployments) and i don't see my deploy :(
Am I missing or doing something wrong?
Thanks in advance to all :)

Hi,
In the web based Process Administration tool, add a 'test' participant. Assign this participant all the roles inside your process.
Log into the Workspace using this new participant. If this doesn't work try starting and stopping the Engine from the Process Administration tool.
Hope this helps,
Dan

HT3258 after transferring data from old mac to new mac, I can't see the transfer files and application on new mac.?

How can I see the data and application that I transferred from Old Mac to New Mac?
Transfer of all the files and application was successful but I can't see it on the New Mac.
Help.

Thanks for your reply
I did reboot the system.
still can't see new user.
One thing though when the system finished transferring the files
at the end a message came up
" 2013-09-11 04:18:05 +0000 Paul Nirwan could not be created.
I did the transfer two times, same thing. first time I used the WiFi
and second time from my back up disk with USB connection, using Migration Assistant.
Second time also said that Paul'Mac already exist, Paul'Mac 2 created.
How can I get rid of first data trasnferred?
It will be using too much space on hard drive if Ileave it therre.

Unable to see the deployed application in BPM Workspace

Hi Every body,
We have developed the Project using Jdeveloper and it has deployed successfully. After that I login in Workspace with assigned user, I could't find the deployed application.
In Enterprise Manager I checked it shows it has deployed and I checked in in workspace login as a weblogic user and seen the assigned role,it has assigned currectly but I am unable to see the deployed application in BPM workspace. Can any body help on this.
Thanks in advance.

Hi
Try this. Log into the Workspace using weblogic user. Go to the Administration option (up and right if I'm not wrong) and check if the roles that you create for the process has the users correctly assigned.
Regards,
isabelbernely

HT4559 i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting notification

i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting>notification
how can i work with the facetime app??? plz reply me

FaceTime is not available in KSA or UAE.
See this -> http://support.apple.com/kb/HT1937

Can't see the "keynote" folder in application supports iwork

I'm trying to uninstall some purchased themes that I don't like. As instructed, I followed the path library>application supports>iwork>keynote>theme. However, I can't see the "keynote" folder, although I showed hidden files. There is only the "pages" folder in that "iwork" folder. Can anyone please help me out?

There are 3 Libraries on the computer. Go to Macintosh HD > Library > application support > iwork > Keynote > themes.

I can't see the data logger to move a lookout application to another computer

To move a application to another PC i can't see historical logging why?
Attachments:
Toneleria15Jul02.rar ‏1424 KB
Toneleria15Jul02.r00 ‏818 KB

Claudio,
I'm not sure if I understand your question.
1) What version of Lookout are you using?
2) Are you using a server-client relationship and you can't see the data in your clients?
3) When you move your Lookout process, have you adjusted where to find your historical database (this can be set under File -> Modify Process or if you are using a hypertrend, you can make sure that your path is pointing to the appropriate location - under the trend properties).
Please give me a little more information and I will try to help you resolve this issue. Thanks.

Can not see the new appending fields in RSA6

Hi,
I add one appending structure to existing datasource, after that I can not see the new field in RSA6, RSO2. However I can see it from RSA2 and SE11 (for extract structure).
Any idea?
Thanks
Victor

Victor,
can you tell me how u have done this. you have a DS in RSA6 created from RSO2. then you created a append structure right? then click on your DS on the RSA6 screen. click on change icon on the application tool bar or function key CTRL + SHIFT +F1, maintain the datasource.
can you able to see the fields here or not (i'm asking for change mode)?
Nagesh.

ICal error - can't see the calendars on opening...

iCal error - can't see the calendars on opening... unless i change the view - but then still the portlet in the top left hand corner remains blank.
Re-installed the whole OSx system from original disks and still the same problem.
cleared out the cache files, including trying to delete the metadata files... taken to my local Apple Centre (Academy) but no sucess so far.
Any ideas? Is it because i have around 8 calendars? Is that too many?
Could it be 'cos I sync with Missing Sync for my Palm TX?
H E L P !!
Powerbook G4 Mac OS X (10.4.7)

When a user launches iCal, they may have one of the following symptoms:
* When iCal is launched the calendar is blank -- no calendars are listed on the left and no events appear in the day/week/month views
* Switching views allows all events to appear but the calendars on the left are still missing
* User can create a new event and designate a calendar but when the event is saved it cannot be seen
* Clicking in the blank space where the calendars are supposed to be has no effect.
This issue is a Sync Services issue and not directly related to The Missing Sync. Mark/Space has identified a couple of solutions to this problem that others have reported. For more information, see: http://www.macfixit.com/article.php?story=20060207074628694
1) Quit iCal
2) Locate the folder, User/Library/Application Support/iCal/Sources/ and delete the contents
3) After deleting the files from this folder, lock the "Sources" folder. Do this by navigating up one level and selecting the "Sources" folder. Perform a "Get Info" (either through the "File" menu or by pressing Command-I with the "Sources" folder selected) then click the lock icon.
4) Launch iCal and your calendars should reappear. Note that the relaunch of iCal will create a default 'Home' and 'Work' calendar, so make sure none of your calendars have the same names as the default .
Do some backups first
Follow those simple steps
5) Go to Address Book, click on 'File' menu and choose 'Back up Address Book'. Go to iCal, click on 'File' menu and choose 'Back up database'.
6) Go to Missing Sync and double click on the Backup Conduit and set it to backup all databases. Then run the sync with just that Backup conduit selected, disable all other conduits.
7) Go to: /Users/<user name>/Documents/Palm/Users/<hotsync name>/ now hold the 'ctrl' key and click on the /Backups/ folder. Choose the option to 'Create Archive of "Backups"'. This is to safeguard your backed up data in case anything goes wrong.
Now 'Reset Sync History' using the iSync preferences option. The first sync will likely be slower.
8) Launch iSync
9) Click on the iSync menu
10) Choose Preferences (make sure the "Enable syncing on this computer" is checked)
11) Click the 'Reset Sync History' button. Read and follow the onscreen directions.
12) This may launch iCal. Also the status of the reset is showing in the iSync display. When the reset is complete quit both iSync and iCal.
Launch Missing Sync and enable the Mark/Space Events and Tasks conduits and set them to Desktop overwrite Handheld. Disable all other conduits.
Then sync, when you do, you will get a dialog box with an orange iSync icon on it. Check the box to erase the device, then click the 'Allow' button. It will overwrite your device. You will get one for events, one for tasks, and one for contacts. The next time you sync .mac or other devices that sync with iSync like an iPod, you will get these same dialog boxes for their databases and you should check the box and click 'Allow' in those cases as well.
If you press the don't allow button you will need to reboot your computer.

Can't see the list of songs on my iPOD 2nd generation

i have installed the ipod, and i am able to transfer my songs into my ipod 2nd generation, however i am not able to see the list of songs that i have put into the actual ipod shuffle. Can someone please help me !
thanks

no, there is contents. i just figured it out.
to recap: i had 2 problems: one was that i couldn't see the contents of the shuffle. the other was that i couldn't eject my shuffle. when i tried to eject, i kept getting the message that i couldn't eject because an application was using the files on the ipod. when i clicked the icon of my shuffle i got the picture of the ipods with the heading "ipod + itunes," as i recall. there were no settings or content tabs.
now i realize there were no tabs because i had not finished the registration of the shuffle on my pc. i had registered the shuffle on the website without using itunes. i didn't realize that there was more i needed to do in itunes because i couldn't see all of the buttons in my window. when i followed through with the registration in itunes all the way to the end, the 2 tabs were revealed and the songs that i had already loaded on the shuffle were listed in "contents." and, i was able to eject the shuffle. apparently itunes (or whatever) was still looking for a completed registration and wouldn't release the shuffle. sigh.
if you can not see the settings and contents tabs in itunes when you click your shuffle in devices or you can not eject the shuffle, look at the window with the picture of the ipods in itunes. there is more below. complete the registration (i had already done so on the web earlier, but my itunes was not complete.).
thanks to everyone for your help.
power spec 8921 (pc) Windows XP
power spec 8921 (pc) Windows XP

Can't see EJB objects in Application Navigator after migration

Hello
I can't see any objects in Application Navigator after migration from previous version of JDeveloper (9.2.0.5), in System Navigator view I can see all sources. Has somebody any idea what the reason is?
Tom

In the application navigator you should see one node per EJB, when you stand on it you'll see the various source files in the structure window.

HT5295 How can I see the transcript text? It does not show it.

I get podcasts from the RN site. All of them are transcripted for ease to the user to find names and review the contents. The old application showe the text on top of the artwork as a transparency and you could scroll as with any other text. Since the update to iOS6 and to the podcast app I CAN NOT SEE THE TEXT!!! They forgot to add an essential part to podcast; the additional information provided by podcasters! Let me know of alternative ways to access the transcript text. Thanks.

Swipe up from the very bottom of the screen to bring up the control Center. Tap on the Orientation Lock icon. It is the circular arrow surrounding a small padlock. This icon will then appear at the top of your screen near the battery indicator and your screen will not rotate.

Can't see the other person, but they can see me. A...

i was wondering if it is possible, this person i believe uses a Android or Iphone, for the camera to be turned off for video chat? I can never see the other person but they can see me - and i can see myself during the video chat. My video which they see i also see takes up the whole screen. This issue also is the same for when i use Windows and video chat with this person.

Hello pfierrobb:
You have to enable it in SKYPE. Open up Sykpe click on tools then select options . When that windows opens select video settings. Then you well see select webcam click on White box select your web cam choices. Windos 7 HP computers it is called HP web camra filter. I just close out the filter stuff if I am not using it during chat session. Some HP computers call it cybrlink web cam. If your web cam isn't listed yet the web cam still works in other applications your Skype software might be corrupted. Just uninstall Sykpe and reinstated it back with a new copy download http://www.skype.com/en/download-skype/skype-for-computer/ If you are still having issues please let us know. Thank you frrw.

HT2499 I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???

I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???

what application are you using to watch the DVD?
is it a burned dvd?

What is the path in the filesystem for the deployed Wendynpro application .

What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
Please help..

Hi,
What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
If you search for your component under the /usr/<SID> folder
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
If you have NWDI in place CTS would help in this, else you can deploy your application using sdm.
in CE you can deploy the application from NWDS.
Regards
Ayyapparaj

Can't see the deployed BPM application in BPM Workspace

Similar Messages

Maybe you are looking for