Can't see the Request ID in DSO

I have an option of choosing the 0REQUID in my DSO, but when i pick it, it isn't showed in the selection for this DSO. and when i see the records in my DSO the 0REQUID is always empty, there is no single value??!!
Why does it happen?

Hello Des., hello Debjani,
thank you very much for your hint.. )
Now I'm a step further, but still not come through.
We've got wrong data in a DSO. To correct the error we need to know, when the data (sales order) were loaded (delta). But I've got problems to match the request ID provided in the Data browser to the DSO with the one provided in the administration to the DSO (rsa1, right click, manage). Sometimes I get a match, sometimes I can't find the matching ID in the administration.
Perhaps you can help me in this case.
Thank you and kind regards
Sascha

Similar Messages

  • Where can we see the deleted requests from the DSO

    Hi all, i have deleted a red request in the DSO , which stopped the process chian, so i manuallly loaded DTP and activate , repeated the pc and its fine now, but i need the information regarding the red request i deleted from the requests tab, can u please help me finding where can we see the deleted requests from the DSO, thanks in advance...

    Hi Raghu,
    Open the PC in SE38,goto PC logs on which day DTP failed.right click on DTP-->select Process monitor
    Click on filter buttor>select last oneweek>Execute
    Then select the failed request(It shows status as deleted) You find the details here itself -->take the request number from this
    goto RSRQgive req id>Execute
    Hope this helps.
    Regards,
    Venkatesh.

  • Not able to see the request in ODS to activate

    Hi all,
    I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
    Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
    Transfer method 'TRFC with PSA' is not supported by the source system
    Diagnosis
    The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.
    Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
    Any help is appreciated.
    Mav.

    Hi Mave,
    Kindly check the following:
    1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
    2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
    --Jkyle

  • Unable to see the request in Reconstruction Tab of Info Cube

    Hi Experts,
    We are scm 5.1 version.
    Actually I have created extraction process to extract data from Demand Planning area. I have extracted data from planning area also. I can see the request in to PSA as well as Info Cube but I am not able to see the request in reconstruction tab.
    Is there any setting to see the request in to Reconstruction tab of the info cube?
    Please advise..
    Regards
    Sujay

    Hi rathy,
    Is there any way to support the equivalent of reconstructions with the new BW 7.0 design?
    I will explian in detail..
    Reconstruction is critical functionality for our current DP solutions, it allows us to "reconstruct" old requests from the backup InfoCube (based on what's been kept in the PSA) and use this to restore data in the planning area to a day in the past.  It is used whenever there is a technical or user error than needs to be un-done.  I believe there is a way to accomplish with the BW 7.0 design.
    Please suggest...
    Thanks in advance..
    Regards
    Sujay

  • How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

    How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
    When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it.  I just need to move it out of the way to modify other portions of the document.
    thanks,
    C

    Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
    Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

  • Airport Utility can't see the airport, nor are shares visible (Why is there no very extensive 'cookbook' on troubleshooting Airport Extremes?)

    For quite a while my MBP (10.5.8) cannot see the Airport Extreme 802.11n (AE) (2nd ed) anymore when I start Airport Utility (AU) (v5.5.3). My solution was to lower security settings of the MBP to 'accept all incoming connections', knowing that this was not a nice solution. Normally I had selected 'acces for specific services and programs' (the lowest option - my AE differs in language). In the past I denied access for requests that regularly came from mDNSresponder (etc), as I could not easily find out how necessary they were. I am not sure whether Bonjour is running; I try to stick to TCP/IP (without Netbios); the same might be the case with other obscure network services...
    Then I added another network drive (WD Mybooklive) that works based on shares. The installation program worked fine, I was able to set up the drive for Timemachine backups and -in the proces of upgrading to Snow leopard (I always stay one OS version behind)- my MP3 collection could be read from another drive that was connected to the AE.
    I am not sure what exactly lead to the loss, but now I can not see the shares anymore in the finder. Unless I select 'connect to server' (Cmd-K) and fill in afp://ip-adres. I had some trouble with the MBP-drive and Disk Utily could not fix it in multi-user mode. Applejack-auto in single user mode finished after some repairs (catalog file and catalog hierarchy errors), but I doubt that causes the trouble.
    In all cases, internetting and accessing the connected drive was no problem.
    The funny thing is, my Mac Mini (10.5.8) however can see the AE with Airport Utility (different version) fine. Somehow I get the idea that the networkstack  of my MBP has been messed up, but I don't know what it should be, nor how I could check it, or how to repair the stack. But maybe it is not the stack at all.
    Right now, I've just reset the AE by holding the reset button for about 10 s. The name has returned to 'Base Station xx', which is visible in AU, but when I click on another button ('manual configuration' or 'continue'), first the message "Are you sure you want to connect to another wireless network?". Finally no connection appears and the error 'AU cannot find your Airport' shows up (while the Base Station is visible in the left column) - or does not show up when I refuse to switch to another network.
    So, who can help me to reconnect to the Airport Extreme and/or repair the network stack?

    WDS is a difficult setup for many users because it is so easy to make a mistake (while swearing that you are not).
    Apple's instructions for WDS are here:
    http://support.apple.com/kb/HT4262
    I still think the instructions provided by Tesserax are the best available:
    http://discussions.apple.com/thread.jspa?threadID=2422028&tstart=0
    I can't add any more to this other than to say that long ago when I used WDS, I would swear that I had all the MAC addresses entered correctly, etc and would still have problems. So, I ask my wife to watch me and she immediately catches something like I entered a "l" (letter L) instead of a number "1", or a "O" (letter O) instead of a "0" (number zero).
    Finally, there's always the possibility of device that is not holding settings...a defective device.
    Hopefully, Tesserax will have some additional thoughts.

  • Can I see the list of Event's Notification types of Azure Site Recovery ?

    Can I see the list of Event's Notification types of Azure Site Recovery ?
    I want to verify Event's Notifications rather than "Virtual machine health is OK".
    Example senarios:
    senario 1. Disconnect the Ethernet cable.
      Can I get the notification e-mail at Disconnecting the Ethernet cable from the on-premises Hyper-V host ?
    senario 2. Turn off
      Can I get the notification e-mail at Turning off the protected Virtual Machine on the on-premises Hyper-V host ?
    senario 3. e-mail test
      Can I get the notification e-mail after turning on Event Notification ?
      Is e-mail address Collect ?
      Can I get e-mail without auto-Junk ?
    Regards,
    Yoshihiro Kawabata

    Hi Yoshihiro Kawabata,
    Thanks for bringing these requests to our attention. We currently do not have support for these three types of email notifications. I will add them to our backlog and we will enable support for them soon.
    Currently, we support email notifications only for replication issues. One example you can easily test is to Pause the replication of a virtual machine from the Hyper-V Manager UI. This should send an email notification.
    Let me know if this helps.
    Thanks
    Siva

  • I have 15.00 on my itune gift card but when i try to download a song it`s saying the card has already been redeem,but you can still see the 15.00 at the top of itunes

    i have 15.00 on my itune gift card but it`s saying the card has been redeem but i didn`t buy  anything yet.You can still see the 15.00 in on my itunes.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT2534 I can't see the "none" option even though I followed the procedure step by step. What is the problem?

    I can't see the "none" option when trying to open an iTunes account even though I followed the procedure detailed in the apple website step by step. What is the problem?

    jimka_2001 wrote:
    What should I try next?
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • When I try to open my project, where can I find the requested file 00000.mts2?

    When I try to open my project, I am asked where to find file 00000.mts2?
    I see almost all scenes in my project in color red  with the text 'media off-line'. But it is impossible to find this requested file 00000.mts2 on my computer. What can I do to solve this problem?
    Thank you for your answer.
    Hans

    Thank you. I have done what you told me. It was a long search, but at the end I was succesful. Again: thank you for your useful answer.
    Greetings,
    Hans
    Verstuurd vanaf mijn iPad
    Op 26 feb. 2015 om 00:29 heeft Peru Bob <[email protected]> het volgende geschreven:
    When I try to open my project, where can I find the requested file 00000.mts2?
    created by Peru Bob in Photoshop Elements - View the full discussion
    This is the Photoshop Elements forum.  Are you using Premiere Elements? If so, ask here:
    Premiere Elements
    By the way, if you moved your media files or they are on an external drive, you will have to relink them.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7230757#7230757 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7230757#7230757
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can not see the data in the grid

    Hi,
    nice to see the new features, but I can not see the the table inserts
    in the data grid - the <data> rider is not clickable.
    Regards

    Hi annerose,
    This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
    1) Back up any important Raptor files, e.g. connections etc.
    2) Remove the existing Raptor Rel 1 installation folder
    3) Install Raptor Rel 2
    Hope this helps
    ady

  • On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

    On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
    Thanks in advance for your help!

    With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

  • I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as how to resolve this issue

    I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as to how to resolve this issue

    I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
    You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
    http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
    I Googled "workaround for FaceTime in UAE" to find this.

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • I bought rango and i can not see the movie in  my account anymore

    i had 3 movies on my account I redeem them but now I only see 2 of them how can I see the other one, I just change my laptop

    If your country allows you to re download past Movies (Not all do) then go to iTunes Store, Click on the Purchased link from under the Quick Links section on the right. Navigate tto the Movie Section, find your fil and click on the cloud icon to download at no extra cost.
    If you do not see the Movie Option then Re-Downloading is not allowed in your country by the Content owners so Apple can not show it

Maybe you are looking for