Can't Understand What's Going on Here
I have a right-to-left, facing pages document I'm working on, the first 4 pages I've numbered with roman numerals, they won't be showing anyway so that's not important, the problem is I started new section numbering on the fifth page but when I do so it shows the fifth page to be on the right when in fact it is on the left?
You can take a look at the image below, shouldn't it be saying: Introd1 iv, and not: iv Introd1?
The triangle for the new section is showing iv although the new section starts on page 5, mind you, if I actually double click on any of these two pages in the pages panel it will display the correct page, my headache is why it's showing them like that? Have I done somehting wrong in the master pages or something? Also, I can't figure out how to export these pages to PDF, it keeps refusing, saying I've entered the wrong numbers. I enter: Introd1-4, to try and print pages 1-4 from the Introd section, but it doesn't let me.
Anyway, here's a screenshot, hope someone can help:
Just to clarify further, it is only in the pages panel where this mistake is showing, and within the pages panel itself it is literally just the labels that are incorrect not the pages themselves, the icons for the pages are showing the correct page on each side. If I click on the left page it will show me the correct left page, same with the page on the right, just the labelling underneath for that spread is messed up. Also in the main application window, this problem isn't occurring in the page numbering, for example below you can see that the left page is selected which in the pages panel is labelled as 4 but which in actual fact is Introd1:
But in the application window, it's displaying the correct page reference:
I made an additional new section just to check further, but same thing:
Similar Messages
-
I can't understand why all of a sudden the display on my computer got all darkened, and I have to tilt the computer to barely see what I'm writing or the icons. I tried the brightening the screen but it didn't work so I'm concerned on what's going on....
-
Can anyone explain what is going on here?
Is the following code not recommend usage of interfaces?
public interface Test {
Test t1 = new Test(){};
}why is:
Test t1 = new Test(){};valid inside an interface
and:
Test t1 = new Test();not?
what is {} really saying here? -
I don't understand what is going on here
I must be retarded because this is simple - a line is scanned - it's parsed into an integer and it's supposed to go through some if/else statements and change my variables based on what my input is -
Everything works up to the if else statements - but I can't for the love of all that is holy understand why it keeps outputting the place holder values and not the manipulated values - eh, here's my code.
I've been trying an input on 12 which should yield max int = 12, pos count = 1, neg sum = 0, odd sum = 0 but it only gives 1, 1, 1, 1
import java.util.Scanner;
public class Assignment2
public static void main(String[] args)
Scanner scan = new Scanner (System.in);
String booger, numStr;
char delim=' ';
int stringLength,firstIndex,nextIndex,maxInt=1,oddSum=1,negSum=1,posCount=1,load=1;
String test = "12"; // delete when done
int numTest = Integer.parseInt(test); // delete when done
String result = ("The maximum integer is "+maxInt+"\nThe sum of the negative "
+"integers is "+negSum+"\nThe sum of the odd integers is "
+oddSum+"\nThe count of positive integers in the sequence "
+"is "+posCount);
// User input
System.out.print("Enter any number of integers, enter 0 to ignore further input: ");
booger = scan.nextLine();
stringLength = booger.length();
firstIndex = booger.indexOf(delim);
nextIndex = booger.indexOf(delim, firstIndex+1);
if (booger.length()==0)
System.out.println ("\nUser failed to input!\n");
else
if (firstIndex == -1)
load = Integer.parseInt(booger);
if (load==0)
maxInt=0;oddSum=0;negSum=0;posCount=0;
System.out.println("\n"+result);
else
if (load>0)
maxInt=load; posCount=1; negSum=0;
if (load%2 !=0)
oddSum=load;
System.out.println("\n"+result);
else
oddSum=0;
System.out.println("\n"+result);
else
if (load<0)
maxInt=load; posCount=0; negSum=load;
if (load%2 !=0)
oddSum=load;
System.out.println("\n"+result);
else
oddSum=0;
System.out.println("\n"+result);
}Java does not dynamically change your variables.
int x = 10;
int y = x;
x = 50;At the end of this code y will still be 10 even though the value of x has changed. That is what you are doing. You initially assign some value to result but then it never changes even though some of the other variables in the code have been changed. -
Went to watch a video on You Tube that I have watched before on my iMac and got the prompt that I had to upload Adobe Flash Player. Did that, and am still getting the same prompt and can't watch any videos at all. What is going on here, Apple??
I do not know how to do this with an Apple TV (I don't have one), but as far as I know Apple TV only does mirroring.
If you have an HDMI cable long enough to reach your TV from where you sit, then it's easy. The TV could be set up in Extended Desktop mode (mirroring off) as if it was simply another computer monitor, and then you could just drag windows to it. If you have the Displays icon in your menu bar, that's where the setting is, or if the icon is not there, then the setting is in the Displays system preference. But again, that's for conventionally connected monitors, not Apple TV. If you don't have an HDMI cable and wanted a long one that's affordable you can get those at monoprice.com.
The answer we are still waiting for is if anyone knows if Apple TV can be used in extended desktop (non-mirroring) mode. -
Can't connect to Itunes store. Keep getting message code"11222". Done all the troubleshooting I can think of . Have researched my network settings and firewall settings. Have followed all the diagnostic routines. Been on the fone w/ HELP , no success. This code appears to apply to windows . but I can't get past this code. Anyone out there got a clue as to what is going on here ? thanks
sambodine4 months and 80 views later, not a single response...
nice to know this support forum works....
Thanks (for nothing) apple....
and BTW, please continue ignoring this topic, cause i really dont give a **** about "genius" any more... -
Trying to understand what's going on with my line!
I wonder if someone could help me understand what's happening to my connection.
I've been on adsl2+ for over a month (since being on a very stable adslmax connection). I'm on a long line 62db atten' and connected at 2890 - same as adslmax which I expected.
A week ago my connection was reset ( I was unaware) and now connect at 2271 - noise margin is now 13db - always had a stable 6db with no drops.
The thing I don't get is every time I reboot my router constantly syncs at 2271. Why would it do this? Previously it sync'd at different speeds.
It's as if I'm now on a fixed rate - but still shows as adsl2+.
Spoke to bt but they say I have noise on my line and it's in 'acceptable levels' - which it isn't!
Just want to understand what's going on!
Thankssince the recent software/hardware updates at certain telephone exchanges, when you reboot the router or turn it off constantly, the exchange you are connected to sees it as a fault, and drops your connection to the lowest level possible. your connection then has to physically be reset by an engineer at the exchange.
this is what hapenned top me. for the last 8 years i have been on bt, always turning my router off at night, when i had finished, or rebooting it if i had a poor line. since june, my connection speed have been abismal, i stopped at 2420 for about a month (half of that the month before) then over a weel, it dropped to as low as 340kbps - on a 20 meg line. after going through the help desk, and "you need a new bt homehub router" event though i did not use theirs, phase, and 2 months of stress, i had an engineer come out on Saturday.
He tested everything (my line is capable of 18.3mb connections). my line was reset ay 8124kbps downstream... 27 hours later, it is on 572kbps, so needs to settle in..allegedly
to get over this, i am using a BTfon zone connection off one of my neighbours, as it is faster...technology - if you are on option 3, then sign up for it now, as things may get worse.
welcome to the world of last wednesday week.
there's now't wrong with 2 cans and a piece of string. at certain times, it is often faster. -
and sometimes i put it in sleep mode and come home on my lunch break and the fan is running at full speed and the computer has frozen up...what is going on here? is it a virus or has my computer been hijacked? it cant be good for the computer...anyone ever had this problem..?
Your problem has been reported many times, but causes are as varied as individuals.
Can we assume that a hard shutdown allows a normal restart?
Can I assume that you have used Disk Utility from your OS X install disc to repair the hard drive directory? The freezes and hard shutdowns require that the drive be repaired (not permissions) or soon the machine won't boot at all.
If the root issue is software related, in Console (the application) under Logs, there should be loggings around the time of sleep and logs that tell you what process went wild and froze the machine.
Network activity is also a common casue.
Other info:
http://support.apple.com/kb/ht1776
If hardware related, such as an external drive, other USB device (Wacom tablet) or USB PCI card, ejecting, disconnecting, removing, or in the case of the Wacom, updating drivers, are all potential remedies. -
I am working on an article of over 7000 words... suddenly, Page, says that document cannot be updated and opened... I lost valuable time and text in the process! What is going on here?
Pages used to make backups... It does no longer... I cannot even revert to a previous version not being able to open the document that I was still working on half an hour ago. Thank heavens, I made a copy by selecting all text and copying it into an email when the problem first occurred yesterday evening. I am now working on it as an email. I can't risk loosing text this way anymore thru Pages. This is very bad. I am truly disappointed by this... particularly having moved from MS Office to iWorks!
-
Question: As I send an email, the mail activity indicator is showing that more than one email is being sent! Last time it was 5 even though I was only sending one and there were no other emails in the out box! What's going on here I ponder?
Several time in the past, similar question was asked in the forum, for example check the link and reference OSS notes mentioned in it. You can also search the forum, if you need further info on this topic.
http://scn.sap.com/thread/3230103
Regards, -
I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be separated. What is going on here?
I noticed the same problem after upgrading a few iPhones to IOS 8, all use the same Apple ID. However, I now notice when I go into Message and instead of selecting a person from my contact list, I start typing their name which brings up a list of people, some of which are not in my contact list and are on one of the other iPhones. There's a circle/exclamation point next to the name which I click on, and one of the options is to "Remove from Recent". How did these names get from one phone to another and how do I remove all "recents"? They do not appear in my contact list. Anyone see this?
-
This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!
Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan -
New problem just started 24 hours ago. When I try to export from the time line to create a QuickTime file, a 7 minute movie on time line takes 3 hours to export and then the export fails, where as a few days ago, that export would take about 10 minutes at most. I get the same failure notice when I try to share to blu-ray, DVD, or Vimeo. Tried to use compressor, no such luck as compressor failed to make a .mov file. I get QuickTime error 0 message about 5 minutes into trying to share to Blu-Ray now. Does anyone know what is going on here? I'm running latest update of Snow Leopard on an intel Mac Pro and the latest update to Final Cut Pro X. I've also installed QT 7.6.6 to use in creating time lapse movie files.
Same problem here, too. Final Cut Pro X 10.0.3 on OS 10.6.8. However, it is only doing it on ONE of my projects. A 4-second test project burned successfully.
I'm actually going to use iDVD to burn copies for a few people, so I only need the movie file from FCPX.
Would someone please post best export settings for use on a DVD? In FCPX, the project is in HD (1080p) with all media optimized to ProRes 442. I know it will have to be down-sampled to DVD resolution, but I've always been curious to know what settings will result produce the best possible quality in DVD resolution.
Thank you!
Bart -
All of a sudden, new tabs have started opening up (in Firefox) advertising games and other stuff. Any idea's of what is going on here?
Try scanning for malware using the removal tools listed near the bottom of the [[Troubleshoot Firefox issues caused by malware]] article.
It might also help if you could copy and paste troubleshooting information into your reply. See [[Use the Troubleshooting Information page to help fix Firefox issues]] for details.
Maybe you are looking for
-
Problem with page breaks in IE when printing to PDF
Hey, I am having formatting issues with IE when printing to pdf, I have a dynamically created report which has page breaks at the end of each page, if I open this report(report is in html) in firefox and goto print the formatting is correct, if I ope
-
Access Denied when uploading documents
Hi, An end user who has design permission on a particular site gets access denied page when user clicks on "OK" in upload document dialog box. but document is uploaded and is checked-out. We checked features, permission they are all same on the all
-
Hi, How to load a pdf in a panel. I tried the code:- var u:URLRequest = new URLRequest("../pdf/Registration.pdf"); navigateToURL(u,"_blank"); This will open the pdf in a new window. I need to get the pdf file open in a panel .
-
Show several gifs files using servletOutputstream
Hello, I'm trying to display several gifs files in a html file. I extract all the files from an oracle database. I'm trying to use a servletoutputstream, but it does not difference between text and image. Process: 1. Select html file from database 2.
-
Quicktime not loading AVI and MKV files. Some other apps also not working..
Hi guys Hope you can help out with this one. Lately my iMac has not seemingly been able to play AVI or MKV files within Quicktime as well as another Application that I use called Elmedia Player (excellent app when it works). However Elmedia Player se