Can't use a wireless connection.

I have just installed windows 10 technical preview build 10041 and I am unable to use a wireless connection to use the internet or for downloading updates. Every time I open Internet explorer or try to download updates my BThub 4 disconnects and wont reconnect.
I have had this problem with build 9926 and have had to use a wired connection, which also will sometimes disconnect as well. I also had this problem with earlier builds. Although with earlier builds the problem was fixed after downloading the updates for
those builds. Am I the only one with this problem, as I haven't been able to find any mention of this anywhere.
cookiecat310.

10061 is the current build for the fast ring, it has corrected several problems with mobile networking
for example my netbook has a qualcomm gobi 2000 and it was not recognized until 10061 when windows immediately wanted to go online via cellular after the wifi was down
expect to see issues, after all this is a preview
use the feedback tool to report issues
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

Similar Messages

  • My laptop is connected to company LAN on wire and I have another active wifi connection provided by a router. Can I use the wifi connection for mozilla connection and the wired for everything else? I'm on Win7.

    I have 2 simultaneous active connections:
    no1: wired connection to company lan; private IP 172.19..
    no2: wireless connection to unrestricted traffic router; private IP: 192.168...
    my question: can I use the wireless connection for mozilla traffic and the wired for everything else?
    I'm on Windows7 Prof, all security updates installed.

    Go to Control Panel > Network and Internet > Network and Sharing Center >
    Click Change adapter settings from left panel > Open the network connection you want to change the DNS servers for by right click and select Properties > Select
    Internet Protocol Version 4 (TCP/IPv4) and click Properties button > Choose the
    Use the following DNS server addresses > enter the IP address for a
    Preferred DNS server as well as an Alternate DNS server.
    Primary DNS: 8.8.8.8
    Secondary DNS: 8.8.4.4
    This IP belongs to Google public DNS.
    Note: Wired connections are usually labeled as Ethernet, while wireless ones are usually labeled as
    Wi-Fi or Wireless Network Connection.
    Uncheck Internet Protocol version 6
    Mark as Answer if it's worked. Thanks. Balamurugan_Subramaniyan

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

    When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

    Yes. The following quotation is from About Windows Migration Assistant
    These are the preferred network connections, in order:
    Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

  • New Netgear Router and now I can't get a wireless connection for my K5400 printer.

    I got a new Netgear Router and now I can't get a wireless connection on my Officejet Pro K5400 printer. Anyone know what I can do to fix this. Using Windows XP

    On the printer: Setup > Network > Restore Defaults.  From the same Network menu, run the Wireless Setup Wizard.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I recently upgraded my internet service with Comcast for faster internet.  When I user ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed.  I have an airport extreme...3-4 years old.  Why?

    I recently upgraded my internet service with Comcast for faster internet.  When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed.  I have an airport extreme...3-4 years old.  Why is the speed so different and are there settings I can change to increase the wireless speed?

    If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
    Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
    Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
    You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
    Diagnosing network issues

  • Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

    Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
    Rp

    1. in physical connections part can i use the same work schema
    2. Can i use same contexts created or do i need to create everything as new and then try?
    Thanks,
    Rp.
    Hi,
    As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
    Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
    And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

  • HT1171 I want to install Windows 7 on my iMac using Bootcamp.  Can I use my wireless keyboard to operate Windows?

    I want to install Windows 7 on my iMac using Bootcamp.  Can I use my wireless keyboard to install and use Wiindows 7 or do I need a wired keyboard?

    http://support.apple.com/kb/HT3986
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Can i use single database connection in a hole java application?

    can i use single database connection in a hole java application?.I have so many forms to use database connection.

    Theoretically you can. Not only theoretically. I've seen lots of application which only uses one database connection (they were using, oracle or mysql)
    The first reply given here assumed that the answer to
    your question depends only on the design of your
    application. That is not true.Yes it's true. Nothing in the original questions says that you aren't allowed to open or close the single connection that you have. It's looks more like the OP is interested in sharing a connection (i.e having a singleton or a connection pool with only one connection)
    It does also depend on the behaviour of the database
    in the background.
    Most databases have a time out for connections that
    are idle Not a problem. Most implementations of connection pools and applications which keeps a connection open have a timer which calls e.g. select * from dual (if you are using oracle) when the connection has been idle for X minutes.
    (some, like db2 on z/OS, even cancel
    connections, that are not idle, if they are open a
    certain amount of time or have reached a given limit
    of cpu seconds.)You would also have that problem if you had a connection pool with several connections.
    In essence: If you have no control over the time
    your application runs (and therefore your connection
    is open) or over type or the configuration of the
    database you are accessing, you can't do it.See above.
    The closest thing to what you want would be using
    PooledConnections, iif those are supported for the
    database you want to access.Not true.
    Kaj

  • Downloading and Installing a Full Solution Driver in Windows 8 Using a Wireless Connection

    Learn how to download a full solution driver for your printer from HP's website and install it using a wireless connection. The full solution driver provides you with all the tools and software needed to use all of the printer's intended functions.
    The steps shown in this video might not match exactly what you see on your screen.
    For other helpful videos go to hp.com/supportvideos or youtube.com/hpsupport. More support options for your printer are available at hp.com/support.
    This video was produced by HP.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.
    This question was solved.
    View Solution.

    I hope you find this video useful for your new Windows 8 machine!
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Can i use any wireless printer when using air express

    can i use any wireless printer when using air express

    If you are looking for a new printer, any wireless model will work with the AirPort Express.
    But, since you indicate that you have an iPad, you would want to make sure that the printer you choose is AirPrint compatible. This way, you will be able to print from your iPad....if you need that function.
    See this Apple support document for info on AirPrint and compatible models.
    http://support.apple.com/kb/HT4356

  • Can I use Bluetooth to connect my PC

    Can I use Bluetooth to connect my laptopTo transfer pics

    No.  These are the supported BT profiles.  Connect to your PC with the supplied USB cable and use iTunes.

  • Can i use iPad to connect apple tv ?

    can i use iPad to connect apple tv ?

    Download the Apple TV manual for whichever model you have.
    http://support.apple.com/manuals/#appletv
     Cheers, Tom

  • Can I use the Camera Connection Kit to transfer files from my Mob/PS3/iPod?

    Can I use the Camera Connection Kit to transfer files from my mobile/iPod or Playstation 3 to iPad using a USB cable?
    I have an *iPod nano 16GB 5g* & my mobile is a *Samsung G800* and *Playstation 3 80GB*.
    _Thanks for reading_

    The CCK will find/ask to download (if iPad supported formate )picture and video files if the device is formated in FAT 16 or 32 and the supported files are placed in a "DCIM" folder in the root directory. I have transfered such files from SD card and USB drives. However, not USB drive work. I had an old 2GB (very large) and when i connected it it said it drew too much power.
    I also downloaded pictures and video files from a compact flash card and smart media card via a SanDisk USB card reader.
    AppleIpod60GB wrote:
    No. The CCK is only designed to allow you to import photos from a digital camera via USB or an SD card. You cannot import any data via this kit and no other files will work as it's designed for only the functionality it does. The kit looks for a folder with the label "DSC####### the same structure as most digital cameras, and will only function with JPG files.
    Message was edited by: lllaass to add CF and SM info

  • Can I use HDMI to connect my AXC-603G features Intel HD Graphics to a monitor

    My AXC-603G features Intel HD Graphics but only comes with a VGA connector and HDMI.  My Dell monitor does have an HDMI connector.  Can I Use HDMI to connect the two?

    Yes, you can use the HDMI port on the computer to conenct the DEL monitor.Once the cable is conencted , you may press and hold the windows key and tap the P key for option to project display on to your monitor. You can also press and hold the windows key and tap the K key Click Second screen and then choose one of these options: Duplicate - You will see the same on both screens.Extend - Your screen is now spread over two monitors, and you can drag and move items between the two.Second screen only - You will see everything on the screen you just connected. The other screen remains blank.  Click the Kudos to say “Thanks” for helping! select "Accept Solution" if your issue is resovled.

Maybe you are looking for