CAN TMS BE DONE BTWN THREE EP7 INSTALLED ON EACH SERVER ?

Hi Everybody !!!
...I want to know that , is it possible to
- Transport a Request between three EP 7.0 installed on three different Server and configured as Dev, Prod, QA ?
- Transport a Request between three different client on the same server, if each one is configured as  Dev. Prod and QA
The above scenario arises out of the limited resources available for SAP Basis Admin Training ?
Helpful answeres would be rewarded without failure ...
Many Thanks in

Well.. A transport can be done btwn three clients within the same SAP system , but there's no way you can define each / any of them as DEV / PROD / QA ..this is what I have found out from the research on the sap portal and net.
Cheers!!!
- Ishan

Similar Messages

  • Can office 2013 home and business be installed in windows server?

    Can office 2013 home and business be installed in windows server?

    Hi,
    Which is the operating system version of your windows server? According to the requirements in the link below, it seems that it can be install on Windows server 2008 R2 and Windows Server 2012.
    In addition, please view the detailed requirements to see if your system is supported.
    http://www.microsoftstore.com/store/msusa/en_US/pdp/Office-Home-and-Business-2013/productID.259321600
    Best regards,
    Susie

  • Can't login to my account after installing OS X Server

    Just some background info:
    I have had a mac mini for 2 years now and I backup to an external hard drive using Time Machine. My wife just got a new Macbook Air and I wanted to make sure her she was covered with Time Machine, but without having to unplug my external hard drive or buy a new one exclusively for her. I also don't want to pay the money for a Time Capsule as I already have a fantastic router. I read that I could accomplish what I want using Mac OS X Server and it's centralized Time Machine service.
    Well I paid $20, installed OS X Server, created her a user account and enabled the Time Machine Service. I left all other Server services disabled as far as I know... Then I (foolishly?) decided to wipe my external drive with my mac mini's time machine backups figuring it may be best to start with a freshly formatted drive when setting this up. So I formatted my external drive, and started to do my 1st initial backup for my mac mini. I only have about 60GB to backup and it was hanging 1/4 done for hours so I figured something was wrong. I stopped the backup and decided to reboot. After rebooting, I'm prompted to login to my wife's account. This is strange because 1) My mac mini usually auto logs into my account 2) I've never logged into her account on my mac mini. 3) I never intended to have an account for her on my mac mini. So now I have no idea how to login to my mac mini using my username. I tried typing in the password I created for her on OS X server but it says "Your account does not have a valid home directory. Contact your system administrator for more information". All I see is my wife's name and the option to login to her... Which I can't. The only other options I get are Sleep, Restart, and Shut Down. I'm freaking out right now, how can I change the user to my user? Or as the administrator? I can't get into my mac at all right now.
    Any help would be greatly appreciated.

    Since you erased the external drive that might have had Server's library, I would suggest doing a clean install of the operating system you had on the Mini, then reinstall Server. You can see here on how to create a bootable USB Yosemite drive and here for a clean install of Yosemite.

  • TS3960 can't login to my newly purchased / installed OS X Server...

    When trying to login to the server with server app it's telling 'shaking' as if to say password is wrong or similar...I've found a few support pages that say to:
    To check if servermgrd is loaded, see the output of this command in Terminal:
    sudo launchctl list | grep -q com.apple.servermgrd && echo loaded || echo not loaded
    If the output is "not loaded", load the com.apple.servermgrd job into launchd with this command:
    sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.servermgrd.plist
    However the output of the first sudo command shows 'not loaded', but the second sudo command to load outputs
    'launchctl: Couldn't stat("/System/Library/LaunchDaemons/com.apple.servermgrd.plist"): No such file or directory nothing found to load'
    NEED SOME HELP PLS, my machine now doesn't work on ethernet due to this problem...fortunately airport is working though for now...
    WHY would a newly purchased and installed version of Lion Server do this!! Arrrggghhh....
    Any help appreciated...how can I kill the server and reinstall or similar? Can't seem to stop it...

    Since you erased the external drive that might have had Server's library, I would suggest doing a clean install of the operating system you had on the Mini, then reinstall Server. You can see here on how to create a bootable USB Yosemite drive and here for a clean install of Yosemite.

  • 10.6 Server - ISP-in-box - Can it be done?

    I have long home-hosted a vanity domain, complete with IMAP/SMTP, web, NAT firewall, DHCP, self-hosted DNS server and the like, using the standard unix tools build into regular 10.4 machine (a 500 MHz G4 that gave 10 years of 24/7 service). Decided to graduate to a MacMini with 10.6 Server. It's not particularly easy to configure, though my ambitions may be pushing the limits.
    In essence, I would like to set up a one-machine ISP/hosting service, with DNS server, standard web & email plus user-resolution file transfer/storage/permissions, and the 10.6 Apple-related bells and whistles, like home page syncing, iCal, Address Book, for the users of an arbitrary number of domains (but let's say 3). It's still mainly for me, so bandwidth and reliability are not a significant consideration - for years, I got by without configuring a secondary DNS server. And yes, I know it's cheaper and easier just to lease domains from real ISPs. I gotta server admin jones ... so kill me.
    Though I can work the individual features and services (mostly) - create users, configure DNS, etc. - I'm missing some of the big picture concepts.
    Is there a direct mapping between a "server" and a domain name (assuming the DNS faces out and is set up right)? Server Admin will let you create a "server", as long as the DNS resolves to a live machine (which can be itself, though it gets confused unless the domains resolve to different IP numbers, even though they are multi-homed through a single ethernet connection).
    If so, can I control and configure the various services for each server/domain, independent of the others? If not, what can adding a "server" do, that a DNS entry cannot? What is the difference between a) creating a "server" having web and mail services and b) configuring virtual hosting for web and email? I realize that they'd all sharing the same kernel/applications/(maybe) libraries off the boot volume; what I want is a separate user space for each domain and associated home pages/mail/web/etc. files. Can OD handle the same user name for multiple, independent domains, resolving to their respective domain shares in the same box (in this case, partitioned on different volumes)?
    I've spent a lot of time with 3 thick books, plus all the on-line docs, deciphering as much as I can. The virtual hosting info is scant. I'm not looking for a blow-by-blow (just yet), but it would be helpful to get a sense of whether this can be done at all, and if so, perhaps a sketch of the strategy - e.g., how much, and where if at all, do I need to go off the SLS GUI reservation and into the CLI?
    Is this a bridge too far? Thanks to any server wizards who can shed some encouraging light.

    You are limited to a single Open Directory - so in terms of authentication, you cannot have the same user names on the server more then once. That also means your directory administrator has access to all the users accounts - so you cannot separate account management. The Apple Admin Application does a good job for majority of the virtualisation you are seeking, e.g. mail, domain, web. What you cannot do using the Admin application, you can do by directly configuring the services themselves (but you may end up breaking the Admin). As you know, the majority of the products that apple use are open source and the web is full of information on how to configure them. You will find that whilst the Admin application is good to get you going and is does the job it is intended for, but after time, you will want to move away from it and use the more complex areas of the servers capabilities.
    Other than posting questions here, good places for to get more 'internal' configuration information/help on the server are [TopicDesk|http://osx.topicdesk.com> and [afp548|www.afp548.com]

  • Installing Oracle Application Server 10.2 for Oracle Database Lite

    Can anybody please tell me how to install oracle application server 10.2 for oracle database lite (i use oracle database lite for my final project). I use wi-fi connection to synchronize between pda and my laptop as server. Should i install oracle internet directory before installing oracle application server? I have difficulties in installing application server, what are the options should i take in every page of installation? Thanks before.

    Install with the base, do not select any other options. Only choose webcache if you require the use of a software load balancer.

  • I have Adobe Acrobat installed as part of the CS6 suite.  It has stopped working (yet again -- it has done that three of four times over the last year).  I have spent days trying to repair it; etc. without any success.  The last time this happened, it was

    I have Adobe Acrobat installed as part of the CS6 suite.
    It has stopped working (yet again -- it has done that three of four times over the last year).
    I have spent days trying to repair it; etc. without any success.
    The last time this happened, it was necessary for someone from Adobe to reinstall it entirely, if I remember correctly.
    I give up. Can anyone tell me what I must do get the program to actually work?
    I spend more time trying to get Adobe Acrobat to work, than I do actually doing my work.
    My OS is Windows 8.1.  My system has 16 MB of RAM, and hard disks are not overfilled.
    I run update virus checker (Kaspersky) daily.
    Cheers,
    Hugh

    Hi Hugh ,
    Could you please tell what are the challenges you are facing while trying to access Acrobat ?
    Do you get any error message ?If yes ,please share the screen shot of the same.
    Please try the solution outlined here: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
    OR
    Try repairing it from Control panel, or try launching it with a different user account and check if it works or not.
    Install the latest updates for Acrobat X from the link : http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    and check.
    Let us know how it goes,
    Regards
    Sukrit Dhingra

  • Scoring one of three button clicks on a single screen - can it be done

    I have captured an Assessment simulation (in Captivate 5). On one screen there are three legitimate places a person can click to move to the next screen - any of them would be correct.
    At the moment, each is being tracked for a point on the Quiz, but only one of them is needed. Which means people are getting 18/20, when really it should be 18/18.
    I can't believe this cannot be done in Captivate, since there must be many systems, where more than one choice can be the correct one.
    I saw a previous thread, which indicated that this cannot be done in Captivate, but I wanted to check again and see if there is some kind of solution to this.
    Thanks
    Helen

    You are correct that this cannot be done with standard Captivate functionality but it can now be done using the Interactive Master Widget.
    What you do is turn off reporting for each of the clickboxes or buttons that would currently be correct (so that they do not report to the quiz) and then add each of these objects to the Master widget as Slave Objects.  The Master Widget is set up to report its own success and score to the quiz when it detects ANY of the other interactive objects have been clicked.
    This means that no matter which of the correct objects the user clicks, they get the same score reported to the quiz and no penalty for not clicking either of the other two correct options.
    You can download a trial version of Interactive Master Widget here.
    You can purchase the widget either as a single widget or as part of a discounted combo pack with other widgets here.

  • I had previously purchased the programs "Pages" and "Numbers" and they are on my iPhone and iPad I was told that the programs would automatically copy a version of itself for the iMac to be running them but I don't see it installed. How can I install them

    I had previously purchased the programs "Pages" and "Numbers" and they are on my iPhone and iPad I was told that the programs would automatically copy a version of itself for the iMac to be running them but I don't see it installed. How can I install for free?  I see that I could go to the apple store and purchase them again but I belibve that since I had already purchased them; I would get a free copy for my Imac.  Do I got something confused here?  Please help.

    Whoever told you that was misinformed or lying. Those applications are sold separately for the iOS platform and the Mac platform.
    Go to the Mac App Store to purchase Pages and Numbers for your Mac. They're $20 each. If you are running an older version of Mac OS X that can't use the Mac App Store, you can purchase install media from Apple.

  • I want to move a PSE 5 catalog and photos from an old Dell Dimension desktop to already installed PSE 13 on a new Dell XPS. Can it be done?

    I want to move a PSE 5 catalog and photos from an old Dell Dimension desktop to already installed PSE 13 on a new Dell XPS8700. Can it be done? If so, how? Link to any clear cut instructions?

    Hi,
    You can visit Common catalog upgrade issues | Organizer | Elements 6 or later and see if it works.
    You can also visit Converting a catalog from previous versions | Learn Photoshop Elements 11 | Adobe TV  for visual help.
    Regards
    Kishan

  • I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

    I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
    I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
    any help or advice would be really appreciated, thanks

    Boot Camp is used to support Windows on the same drive.
    You can have a different OS on every drive.
    You could have Windows 7, Vista, and XP all on one drive if you so choose.
    I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
    Remove all your other drives while you install Windows 7.
    You could even relocate XP - if you need it even - or recover the hard drive space.
    You should always keep 30% free for Mac OS; same for data/media drives.
    Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

  • Adobe Bridge has been deleted and needs to be re-installed. How can this be done without reinstallin

    Adobe Bridge has been deleted and needs to be re-installed. How can this be done without reinstalling the entire CS5

    Hi RDMDanielM,
    Welcome to the Community!
    We cannot install Adobe Bridge as a Standalone product, you can just reinstall Photoshop and Bridge will be reinstalled with it. Go ahead and start uninstalling CS5 suite but choose Photoshop from the list and the same will be applicable while Installation.
    Thanks!
    Ankit

  • I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

    On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

    Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  • I've just migrated my Logic Pro 9.1.8 to a new Mac because my old computer crashed. They are asking for a serial number, but I don't have the install disks anymore. Is there someplace in the software itself that I can find the serial number?

    I've just migrated my Logic Pro 9.1.8 to a new Mac because my old computer crashed. They are asking for a serial number, but I don't have the install disks anymore. Is there someplace in the software itself that I can find the serial number?

    Please stop making multiple posts on the same subject.. This is the third thread you have created in a short space of time asking the same question.
    Please read the answers given in this thread you posted...
    https://discussions.apple.com/thread/5311324?tstart=0

  • Unable to install AcrobatProDC to convert pdf to power point can it be done with Pro?

    I'm unable to install AcrobateProDC to convert pdfs to powerpoint, can it be done with AcrobatPro?

    Hi markn117,
    Could you please let me know what version of OS are you using.
    Please ensure that you are signed in as administrator and anti-virus software is disabled temporarily as that might interrupt the installation process.
    What exactly happens when you try to install Acrobat DC? Does the installation stuck in between?
    Is there any message dialog box that prompts on your screen?
    Using Acrobat Pro DC, you can definitely export any PDF to PowerPoint with ease.
    Let me know more so that I can help you out with the same.
    Regards,
    Anubha

Maybe you are looking for

  • Activation of imbedded files in Acrobat 9

    I created a pdf-file from a word document which contains objects like pdf-files, word documents (*.doc) and powerpoint presentations (*.ppt). In Word the embedded files are opened and can be handled whereas  in the pdf-version of my word document not

  • I can't delete the email on my iCloud advanced setting

    Help I can't get rid of the advanced email in my iCloud account on my iPhone 5s, my mail keeps appearing on my daughters iPhone 4. How do I delete it? It's becoming very frustrating... Please could someone help me? Thank You

  • Rdate in solaris 11

    how can i enable the rdate services in solaris 11

  • SA Releases not show sched lines with reduced qty

    Is there anyway to have the SA releases show the MRP-relevant qty instead of the scheduled qty when using confirmations?  The problem is i am using shipping notifications for vendors with long delivery times and they are requesting that i remove the

  • What does the letter c next to price of an item mean?

    I am seeing for the first time the letter c next to the price of my items. What does this mean?