Can too much memory lead to a kernel panic on a MacBook Pro? specs 2.4GHz intel core i7 16GB DDR3 RAM   late2011..My laptop began suffering from kernel panics 3 mos ago first noticed using public wifi. Gone thru apple support all the way to engineers

Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night  attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card.  The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit.  I would describe my use as "light"  based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support  and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted  3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix  graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue  given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble.  Does that make sense?  Not to me....but it is clear to all my level of knowledge.  Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.

The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

Similar Messages

  • Can I use Final Cut Studio 3 - notably FCP 7 - on the lastest MacBook Pro (non Retina) (Z0MV-27-4GB-512-HRA Apple 15" MacBook Pro/2.7GHz Quadcore Intel Core i7/8 GB) running OS 10.8?

    Can I use Final Cut Studio 3 - notably FCP 7 - on the lastest MacBook Pro (non Retina) (Z0MV-27-4GB-512-HRA Apple 15" MacBook Pro/2.7GHz Quadcore Intel Core i7/8 GB) running OS 10.8?  If not, is there a work-around if I have to revisit work done in FCS 3?

    I have it running on the latest NON-Retina MBP. And a good friend of mine has it running on his Retina model. Works fine.
    Henry English wrote:
    What if I have to revisit any one of them?  What if I try FCP X and find I prefer FCS 3?
    If you need to revisit them...that's why you install FCS3.  That's really the only reason I have that on my system, to revisit old projects, and to deal with clients who still use FCP 7.
    You really should look at moving on though...not sticking with FCP7. It's 4 years old...two years since it was EOL.  Adobe Premiere Pro CC is a very good FCP replacement...although I don't like their "rental" method of paying a subscription to use it.  Or you can buy Adobe CS6...but that just lacks enough to make it not quite tempting for me.  Premiere CC is spot on...but **** if I don't hate that subscription model.  But there's also Avid Media Composer.  But that doesn't do a lot of things that I used FCP and Adobe for...

  • (macbook pro 2.4 ghz intel core 2 duo 2010 13" aluminum with 8gb of memory and a 250gb hard drive running version 10.6.8 with safari 5.1.4) Safari will open up intermittently on its own.

    I have a macbook pro 2.4 ghz intel core 2 duo 2010 13" aluminum with 8gb of memory and a 250gb hard drive running version 10.6.8 with safari 5.1.4. Safari will open up intermittently on its own. System preferences and the dock isn't set up to start safari. Can't figure out why this is happening. Had reloaded system from scratch and noticed this happening lately.

    Remove iAntiVirus, then reboot, see if it's better.

  • My Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?

    my Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?
    Toyoo

    These are some of the most common Questions (Q) and Answers (A) about Lion:
    Q: What are the system requirements of the Lion upgrade?
    A: Core2Duo, Core i3, i5, i7, and Xeon Intel CPUs with 2 GB of RAM in a Macintosh computer with 2 GB of RAM, and 4 GB (7 GB after installed) for downloading from the Mac App Store (Available in 10.6.6 and later). Unofficially, past upgrades have arbitrarily also required an additional 15% of the hard drive to be free for data.
    Q: What applications are compatible with Lion?
    A: http://roaringapps.com/apps:table provides a nice third party editable listing for people to include the compatible applications. Many of these compatibility entries came from before Lion's release. Please verify they are correct now that it has been released, and help edit it for more accurate data. Be sure to include any update version of Lion post release that you have found is or is not compatible with it, for the help of others who may be upgrading to Lion the first time. Additionally, as it was released, there is no Rosetta. This means any application that is stated to be PowerPC in the System Profiler, will not work with Lion, and needs a comparable application or upgrade to be compatible. The System Profiler is in Apple menu -> About This Mac -> More Info. Intel and Universal applications are on the whole supported, though may still need some tweaking before every feature is compatible.
    Q: Are there any pitfalls to watch out for?
    A: With all upgrades, backing up your data at least twice has been a given. Hardware can fail independently of downloads and upgrades, though may happen simultaneously. Software may be found to be incompatible that has not been tested with the new upgrade, or combination of other software that might be installed with the upgrade. It is also strongly recommended once your backup is complete, to shut down your computer, remove all but Apple wired keyboard and mouse (notebooks remove all input devices). Then once done, reboot, and go directly to the upgrade distribution system available. Third party system tools, modification, and "maintenance" applications should be verified as compatible, or removed until known to be compatible. Check with developers how to remove if it is essential to use Lion before those applications become compatible. Most "maintenance" tools that deal with system cache, prebinding, are not really maintenance tools. Ask on forum when are the appropriate times to use them before assuming they should be used for upgrades or otherwise.
    Q: How can I get from 10.4 or 10.5 to 10.6.6?
    A: Purchase a 10.6 retail installer from an Apple retail or third party reseller. It has a picture of a Snow Leopard on the DVD, and does not say Upgrade, Dropin, or OEM. Install it, and then install the 10.6.6 combo update from:
    http://support.apple.com/kb/DL1349
    Q: Is it true that I can only get it from the Mac App Store?
    A: Presently this truth is based on current documentation as of the writing of this article. It may change, but we can't speculate as to its change. It has a better chance of changing if users request something different at:
    http://www.apple.com/feedback/macosx.html
    Q: What limitations might one encounter if it doesn't change?
    A: First off the 7 GB space limitation on the hard disc after it is installed. Secondly, the size of the download file requires significant time, unless you have a high speed broadband connection. Times expected are below -
    4 GB at:
    5Mbps is 2 hours.
    at 1 Mbps is 10 hours.
    at 384 kbps is 27 hours.
    at 56k kbps is 184 hours (nearly 8 days).
    If you include the 10.6.6 combo update of 1.06 GB
    add 29 minutes for 5 Mbps
    145 minutes (2 and 25 minutes) for 1 Mbps
    6 and a half hours for 384kbps
    A 24 hour day and 15 hours (for a total of a minimum of 39 hours) for 56kbps
    Remember the retail 10.6 currently does not include the App Store, and those upgrading from 10.5.8 or earlier will need to both buy the retail 10.6, and download the combo 10.6.6 update, not to mention ensure they have the correct processor and 2 GB of RAM. Finally once it is available, you'll have find out how long approximately it takes to install after the download is complete.
    These times do not include installation time, which on a MacBook Pro 3,1 15" installing on a Firewire 800 Newertech Voyager with WD10ACS-322J80 drive, 10.6.7, took 1 hour and a half to complete the installation from double clicking the install command to the registration screen. These times may vary by connection speeds from a non-dedicated connection, or background application usage of the internet. Any applications running when the installation process begins might interfere with the installation itself, and they should be quit first.
    The installer just before it starts has in its package contents an InstallESD.dmg file a DVD burnable image to install on additional computers in the home without downloading over again. So if you desire to reinstall without an extra internet download, extract that file, by selecting the installer in the dock, and control-clicking it, and revealing it in the Finder. Next Control-mouse click it, and select show package contents. Inside that folder is a Shared Support folder. That's where you find the DMG.
    Q: If I purchased a Mac recently, can I get it cheaper?
    A: Yes, visit http://www.apple.com/macosx/uptodate/ for details.
    Q: When will Lion become available?
    A: It became available July 20, 2011.
    Q: Which Macs can run Lion?
    A: Look at Apple menu -> About This Mac -> More Info, and see if you meet the Machine ID and RAM requires under the hardware. 2 GB is required for all These Machine IDs will run Lion:
    Mac Mini 2,1 and later
    MacBook 2,1 and later.
    iMac 5,1 and later.
    All MacBook Air.
    MacBook Pro 2,1 and later
    All MacPros.
    The Macs with the Machine IDs below will not run Lion (x can be any number):
    Mac Mini 1,x or PowerMac x,x
    MacBook 1,x
    MacBook Pro 1,x
    iMac 4,x, 3,x, 2,x, 1,x
    Authored by a brody
     

  • When using safari, my screen will suddenly scroll all the way to the bottom and will not resound to any commands.  This affects all running programs.  How do I stop this?

    When I am on the internet, my screen will suddenly scroll all the way to the bottom and will not respond to any commands.  All of the other programs are then affected the same way and you cannot even use the commands at the top of the screen becayse they all scroll to the bottom.  After a while, the screen resets by itself.  Help.

    It sounds like a problem wih the backlight inverter. Usually they just go, instead of on and off.
    In a dark room hold a flashlight on the display when it blacks out. If you can see the items on the desktop, it's probably the backlight.

  • I have a MacBook Pro that has an Intel Core Duo Processor but to upgrade to Lion OS X I need an Intel Core2 Duo. Can I upgrade?

    I have a MacBook Pro with Snow Leopard OS 10.6.8 but want to upgrade to Lion. My Mac that has an Intel Core Duo Processor (I know really outdated huh) but to upgrade to Lion OS X I need an Intel Core2 Duo. Can I upgrade or will it mess it up?

    It actually shouldn't allow you to upgrade. Your configuration should be detected and then it should reject your attempt to upgrade.

  • I have iPhone 4S 16GB using v. 6.1.3 & Macbook Pro 2.16 GHz Intel Core Duo OS 10.6.8

    Today I added a new entry in my Address Book on Macbook and also edited an entry on my iPhone Contacts.  I have tried syncing several times and neither is updating on the other device.  Makes me wonder how many other entries are not synced.  Any ideas?

    Sorry, I did not make myself clear.  I am asking for help with the problem of unsuccessful syncing.  In the past (after I finished syncing) the Contacts on my iPhone were identical to the entries in Address Book on my Macbook.  Yesterday I discovered some entries that did not succdessfully sync.  I am asking for help with this problem.

  • IMac using OS 10.8.4 volume goes all the way down on restart

    If my volume is halfway up and I restart my computer it automaticcally changes to all the way down.  I want it to remain where I last set it on restart.

    it didn't chime twice as the instructions said it would.
    When you restarted, was the system clock still showing the correct time? If it was, you probably didn't reset the NVRAM.

  • FarmTown in Facebook will not open all the way? Why? I can't use Firefox :(

    I just downloaded Firefox for the second time. I uninstalled it the first time because it would not open Farm Town all the way. I only get the bottom part, and not the farms.
    I figured I would try downloading your program again, and the same problem. I can't use Farm Town. I downloaded it the standard way, I didn't try to change anything when it was going to be downloaded....I am using Windows 7. I'd appreciate hearing from you at your earliest convenience
    Sandy

    You are saying Firefox opens full size, but when you what the smaller
    window, you can't change it's size?
    Do you have any other problems with Windows or Firefox?
    Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

  • What if I didn't charge my mac all the way before using it for the first time?

    Okay, so I got my Macbook for Christmas this past year (Mid 2011 model) and of course I was screaming my head off with excitement.
    I powered it up, starting using it for a little bit, then plugged it in to keep it going. I didn't charge it all the way to 100%, I think I was using it for about three hours while it was plugged in and up for the first time. That night, however, it did charge all the way and I don't see any problems with my battery, but I wouldn't know if it was operating at full capacity if the capacity I've been using this whole time has been lowered.
    Thanks!

    Ahh.. okay?
    I was just curious because they all say to charge it fully for the first time.. didn't know if this did anything to the battery or not.

  • Is it safe to update iPhone using public wifi (eg apple store)?

    Hi,
    Is it safe to update iPhone(from ios7 to ios7.04) using public wifi (eg apple store)? Thanks.

    If it is an officially unlocked iPhone, you can use any supported SIM.
    Follow these steps to upgrade: iOS 5: Updating your device to iOS 5

  • Can I Delete The "SNAPSHOT" In My MacBook Air ? Those thing use too much memory on my MacBook.

    I need delete it the SNAPSHOT from my mac Because they use too much memory in my mac.

    Disable Time Machine Local Backup Storage
    Here’s how to turn off local backups:
    Launch Terminal from /Applications/Utilities
    Enter the following command:
    sudo tmutil disablelocal
    Enter the admin password when requested to disable local backups
    you can also use "google translate" to translate this to your native language if you are having any problems understanding any of the words

  • HT3887 Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

    Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty

    Hi:
    There are no dumb questions...answers, yes, but not questions.   Sometime I use acronyms and forget that I should explain things a bit more. 
    Resetting those two things sometimes helps and cannot hurt.
    SMC=system management controller:
    http://support.apple.com/kb/HT3964
    PRAM=parameter random-access memory:
    http://support.apple.com/kb/PH4405
    If that does not help, delete the phone from your computer (system preferences>Bluetooth), restart, and then add it back in:
    http://support.apple.com/kb/PH3660
    Barry
    P.S.  If everything fails and you are near an Apple store, make an appointment with a "genius" and take the devices in for them to assist.

  • Jack and oss2jack consume too much memory

    This is my free output when I load jack and oss2jack at startup:
    total used free shared buffers cached
    Mem: 250148 244720 5428 0 5160 67224
    -/+ buffers/cache: 172336 77812
    Swap: 2449860 66048 2383812
    A check in top reveals that jack and oss2jack are the main culprits.
    Because of this, I cannot load hydrogen with the ns_kit7free samples (which is 200MB worth of .wav files). It terminates (probably due to trying to access too much memory) when I attempt to switch the drumkit to ns_kit7free. I have managed to load it before, when I was just using ALSA directly. Is there any way to reduce the memory consumption of jack and oss2jack?
    I have increased my swap space to > 2GB (as seen in the free output) but it doesn't help.

    jonathantan86 wrote:From top's output jack took up 2/3rd of the memory used. About adding more memory, well...it's a laptop so it's difficult to add memory.
    Well, if this can't be solved and you don't have to use ALSA, try OSS/Commercial (wiki); it has a virtual mixer in kernel-space and supports up to 32 sound output streams

  • Apps are using too much memory. how do i find out how much each app is using?

    MACAir Memory 128gb: the apps are using too much memory. i get not sufficient memory for upgrades. how can i find out how much memory each app is using?

    Mavericks is designed to use RAM differently for good reason. Normal
    http://appleinsider.com/articles/13/06/12/compressed-memory-in-os-x-109-maverick s-aims-to-free-ram-extend-battery-life
    Mavericks uses RAM much more efficiently than any other previous version of OS X. Mavericks now has a memory compression feature that will compress the memory occupied by applications that aren't being actively used and give the freed up RAM to the application that needs it the most.
    Memory Pressure graph that tells you how stressed is the system in terms of memory.
    Fore more information about OS X Mavericks new system management technologies visit:
    http://www.apple.com/osx/advanced-technologies/
    See page 5 here:
    http://images.apple.com/media/us/osx/2013/docs/OSX_Mavericks_Core_Technology_Ove rview.pdf

Maybe you are looking for

  • Can I transfer Time Machine Backup from WD Hard Drive to Time Capsule?

    I have a Western Digital 500 Gb. Hard drive and recently purchased a 500 Gb.Time Capsule which, at the moment, am using only for the AirPort feature. I would like to use Time Capsule for my Time Machine backups and use the Western Digital drive as my

  • Using New GL and FI-SL both together

    Hi, actually we use FI-SL (SAP 4.6C). Our system will be upgraded on mySAP ERP and we will use New GL. Is it possible to use FI-SL and New GL both together in mySAP ERP? We must continue the use of FI-SL in mySAP ERP, but we like to use New GL additi

  • TFTP transfer problems

    I am trying to upgrade multiple 1841 routers with a new ios which is IOS Software-12.4.24T5 advanced security. The Routers have 256 dram and 64 flash Min Requirements are 192/64 for the new ios. the ios file is about 32 mb in size and i have made at

  • Connecting to remote database without using db links

    Referred Thread: Re: Remote DB connection without DB link In reference to the thread above, my question goes like this: Let's say I want to run a query from a database and use data from another database. I have the user, password, SID and port number

  • Networking a Windows Vista PC and MacBook

    Hey guys. I am trying to share files and a printer connected to my Windows Vista PC. Yesterday I could see the Widnows "public" folders and be able to take files from them, but couldn't put files in the folders. Then I went and set up an account on b