Can viewers other than the IP/TV viewer be used to recieve IP/TV streams?

Looking at IP/TV, but with over 2000 users, I dont want the hassle of rolling out a new viewer app when I already have Quicktime installed everywhere.

Depends on several things...
1. If it's just a video/audio stream
2. How it's encoded
If you are just streaming audi/video and you are using MPEG1 you can use quicktime. If you are using a Mac, you can also download the MacTV client from www.iwitnesstv.com . It does support the question manager too.
Using just quicktime (on windows or the Mac) you can open URL and type in the rtsp://URL to the file you want. It may take some trial and error to get the file right.
Quicktime only supports MPEG1 by default, and though you can buy the MPEG2 encoder/decoder for QT it still doesn't support MPEG2 over RTSP as I understand it (though I haven't tested it one way or the other)

Similar Messages

  • How do I sync my iPhone 4s with a different computer other than the original one that I used initally?

    How do I change computers for syncing my iPhone 4s?  The original laptop that I used to sync with died and I can not get my iPhone to sync with my desktop.

    can't if you do not have access to the old library (the usual workaround is to backup the old library and import it to the new itunes)
    for important data...
    sync your existing contacts with icloud, your text messages will not be disrupted, music will sync with whatever music you have on your new itunes, photos shoud still be in the camera roll (I would sync them to photostream before you sync, just in case).   Any photos on your phone that are not in camera roll or photostream... if you lost those pictures with the computer crash I would take screen shots (lock button + home button at the same time) of each photo so they show up in the camera roll.  App data may or may not be lost.  In my experience, it depends on the app.  Some of the apps recognize your apple ID and sync data over the internet with servers, some do not.  I would take note of important data (such as passwords in a password keeper if you have such an app) just in case if you lose that data.

  • Since the last update, you have open your websites and they used to show a pic or website marker at the beginning of each website so you knew what it was, not its just a blank letter and its says something other than the website being viewed, annoying. So

    Please fix the missing website detail pics in the tab bar.
    == This happened ==
    Every time Firefox opened
    == Last update a few days ago

    mikeporter wrote:
    I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
    Mike...
    I didn't want to step on your toes. No need to get personal.
    Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
    Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
    I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
    So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
    And if the text wasn't that helpful, here are two screens:
    Parent VI:
    SubVI:
    Attachments:
    main.png ‏2 KB
    subvi.png ‏5 KB

  • Can someone other than the account holder make an appointmen​t?

    Can the son or daughter of the account holder make an appointment? If so, does age matter?

    yes, but what kind of appointment? if it a dispatch appointment, your son or daughetr must be 18 years old and above. Or any other appointment? as long as you provide the information like, adress, account holder's name, and other info yes it is. But the exeption is the changing of password of your verizon email or account, as far a s I know only spouse is permitted.

  • How to enable remote debugging for a session other than the current one

    Hi all,
    I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
    More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
    The docs indicate that I should be able to do so:
    dbms_debug_jdwp.connect_tcp(
    host IN VARCHAR2,
    port IN VARCHAR2,
    session_id IN PLS_INTEGER := NULL,
    session_serial IN PLS_INTEGER := NULL,
    debug_role IN VARCHAR2 := NULL,
    debug_role_pwd IN VARCHAR2 := NULL,
    option_flags IN PLS_INTEGER := 0,
    extensions_cmd_set IN PLS_INTEGER := 128);
    But when I try (even as sys), I get the following:
    exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
    ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
    ORA-06512: at line 1
    00022. 00000 - "invalid session ID; access denied"
    *Cause:    Either the session specified does not exist or the caller
    does not have the privilege to access it.
    *Action:   Specify a valid session ID that you have privilege to access,
    that is either you own it or you have the CHANGE_USER privilege.
    I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
    Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

    Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
    I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
    Regards,
    K.

  • TS3297 iTunes puts up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one. How I can clear that messag

    I've been running iTunes on WinXP for years with few problems.  I have all my iTunes files on an external USB drive. I just bought a new PC running Win7, 64-bit.
    I connected the external USB drive to the new PC and installed 64-bit iTunes on it. When iTunes started up, I pointed it at the iTunes directory in the external drive, using Edit > Preferences > Advanced > iTunes Media Folder Location. It showed a progress bar that it was updating the iTunes Library. I signed in and authorized the new machine. I have one spare authorization.
    Then iTunes put up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one.
    When I click OK, the iTunes Store page remains blank, apart from saying "iTunes Store" in the middle of the page.
    I went to "View My Account" and pressed the Reset button to "Reset all warnings for buying and downloading items", but that doesn’t fix this particular warning. I also tried Edit > Preferences > Advanced > Reset Warnings and Rest Cache.
    But still, every time I click the “App Store” button in the iTunes Store window, the message appears. If I click the Books, Podcasts or iTunesU buttons, these display normally.  So I’m stuck with being unable to purchase apps, other than through my iPad and iPhone.
    If I move the external drive back to the XP machine, the same thing happens.  If I go to another PC - a notebook running Vista - everything is normal.
    Any idea how I can clear that message?
    Thanks for any help you can offer.

    Further info on my question above.
    I have tried re-validating my credit card, which apparently fixed it for some. 
    I have also tried uninstalling, re-downloading and installing again.
    Neither of these steps fixed the problem.

  • HT4550 My bar on my safari is gone, as in i can't go on any website other than the apple store

    My bar on my safari is gone, as in i can't go on any website other than the apple store. how do i get the google bar back!!!

    View > Show Toolbar

  • Can I install Adobe Reader to a drive other than the C: drive?

    Can I install Adobe Reader to a drive other than the C: drive?

    Hello there,
    Welcome to Adobe Community. Yes it can be installed on a different drive. Though some of the files installed by it will still be installed on C: drive.
    When you run the installer, use 'Change destination folder' at the bottom of the panel
    If you already have Adobe Reader installed on the C: drive, you must uninstall it before installing a new version on a different location.
    Thanks!

  • When in mail, i would like to move emails to different folders other than the inbox, sent and trash can a folder be created?

    When in mail i would like to move my emails to a different folder on mail account other than the inbox, sent and trash options, can i  create a new folder?

    The suggestion above is for MailBoxes on the Mac in the mail app and have nothing at all to do with the iPad. I think that you are asking about the iPad mail app.
    You need to have an IMAP email account in order to create additional mailboxes on the iPad.
    If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
    If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

  • How can I add vocal effects other than the 9 Voice options? (I can't shift pitch)

    Hello!
    I am making the switch from PC and am just trying to lower the pitch of a vocal track by at least an octave; I just got a MBP last week and am running GB 10.0.2. I can't find any info on similar problems that is helpful; most solutions I've come across show that when the track is selected, there should be a pitch shift bar with a sliding button, but I do not have that. I read a lot of people saying something about the track being purple or not, but I'm not sure if that's relative to the version I have or if that has anything to do with what's happening. When I select the track, in the little area toward the lower left when "Track" is selected, (what is that space called?) where the pitch shift option is for other people, I only have a sliding bar for Pitch Correction, and a checkbox for Limit to Key and Enable Flex. When "Region" is selected, it just shows the name of the region and there are no options. Another question I have is how to change the pitch of midi sounds? When the keyboard is open on the screen I have tried moving the little octave shifter, but it assigns the sounds that are on the keyboard at different locations if I move it, so it changes the sound completely. A couple of them shift one octave up or down, but there are no actual controls..
    I'm mostly just dabbling with EDM/trap/Hiphop tracks at the moment, but am confused about whether or not there are other vocal effects and controls other than the preset Voice options in the instrument area (Bright vocal, Classic vocal, compressed vocal, Edge vocal, etc.)? I'm not going to be using GB forever, but are there not any other options like for current rap/trap production (phaser, balance, EQ, auto tune, choppers, actual voice altering effects, etc.) [preferably without buying extra things]? And not only vocals, but editing effects for all sounds.. If so, how do I get to them? And if not I know I should at least be able to lower or raise the pitch of a vocal recording... There are some pretty legit electronic instruments that are exactly the kind of sound I'm going for so I was surprised to not see an equally simple to access vocal effects board or something. Any additional tips for a n00b electronic music producer would also be greatly appreciated! Thank you for any help!

    In GarageBand 10 you can no longer change a track with an audio file to a "purple" audio recording, as it has been possible in GarageBand '11.
    Even, if you can make the transpose slider visible by enlarging the the track editor panel, the slider will be disabled.
    What you can do however, is either add an AuPItch filter  from the audioUnit panel or to convert your audio file to loop and to admit from the Loop Browser.
    In the new GarageBand you add the AuPitch filter from the Smart Controls.
    Enlarge the SmartControl panel by dragging the dividing line upwards, until you see the Audio Units brick, then add an Apple Audio Unit and set it to AuPitch.
    Or create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library". You need to trim the filet an exact number of measures.
    Set the current key and tempo, name the loop, and save the loop. Make sure, that one-shot loop is not enabled.
    Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
    You will be able to transpose the sample  like any regular loop.

  • Can I use a different charger for my iPhone other than the one that was supplied for it

    Can I use a different wall charger for my iPhone 4S other than the one that was supplied with it

    wjosten wrote:
    Lawrence Finch wrote:
    Apple puts no special requirements on it other than that it meet the USB spec.
    Except for the connector...
    What is special about the connector for the 4s charger cable? Mine is a normal USB connector. The question was about the wall charger, not the connector to the phone.

  • How do I get an iPod touch to turn on other than the normal way. It has been dropped and all I can get is a blank screen. Have tried holding the HOME button down for 30 sec. but that didn't work.

    How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.

    David ..
    Your topic refers to an iPod touch
    Then you say:  How does one get an iPod nano to turn on ......
    If it's an iPod touch, try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, whether it's an iPod nano or touch, it probably needs service >  Apple - Support - Service Answer Center

  • Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

    Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

    Yes. You can define alternate locations in teh application manager. just be aware that some components will always end up on your system root drive no matter what.
    Mylenium

  • [svn:bz-trunk] 17772: Update the url in the tests to use a relative path instead of the default localhost : 8400 so that the tests can pass on appservers other than the default Tomcat .

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

  • Can I hook up Apple TV to my HDTV? If so, do I need anything other than the Apple TV box?

    Can I hook up Apple TV to my HDTV? If so, do I need anything other than the Apple TV box?

    You'll need an HDMI cable to hook it to your TV.  Once you have that, you just have to plug in the Apple TV power and then plug it into the television using the HDMI cable.
    EDIT:
    If you don't have wireless you'll also need an ethernet cable to hook the Apple TV up to your router so you can stream content from the internet.
    Message was edited by: alexives

Maybe you are looking for