Can we call a wepage through sap report
Hi
experts can u people please tell me that can a webpage (like yahoo.com) be called from a report.
Hi,
go through the following example....
I N T E R N A L T A B L E
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
*-append internal table---
URL_TABLE-L = 'http://www.yahoomail.com'.
APPEND URL_TABLE.
URL_TABLE-L = 'http://www.gmail.com'.
APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.
APPEND URL_TABLE.
URL_TABLE-L = 'http://email.rapidigm.com'.
APPEND URL_TABLE.
P R I N T T H E U R L L I N K
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.
FORMAT INTENSIFIED ON.
WRITE: URL_TABLE.
HIDE URL_TABLE.
FORMAT HOTSPOT OFF.
FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
E V E N T F O R C L I C K
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
commandline = URL_TABLE
INFORM = ''
EXCEPTIONS
PROG_NOT_FOUND = 1.
*- sy-subrc check----
IF SY-SUBRC <> 0.
WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
*-- End of Program
**********do rewards if usefull
vijay
Similar Messages
-
How can I send purchase order through SAP mail ?
How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?
just do it as <b>Anji reddy</b> said to you ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the the belwo program is for sending <b>the Spool Request data as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish -
Can we call function modules in SAP query or ADHOC query
Hi ,
Can we call afunction moudule in sap query or ADHOC query ?If yes How
An early responce is greatly appreciated
Thanks and best regards
Rajeev ChhabraHello Rajeev Chhabra,
Yes; you can call function module in SAP Query. In InfoSet definition (SQ02), you can create additional field. In this field definition, you can add code snippet where you can function module.
However, this is not possible in Quick Viewer (SQVI) Query.
Thanks,
Venu -
Can we call a bdc from a report program?
hi
Can we call a bdc from a report program?
Thanks
RamaHello,
Yes..
Check this example:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA : L_EBELN TYPE EKPO-EBELN,
L_EBELP TYPE EKPO-EBELP.
DATA : L_DATE1 TYPE SY-DATUM,
L_DATE2 TYPE SY-DATUM,
L_YEAR(4),
L_MONTH(2),
L_DATE(2).
DATA: L_AMOUNT1 LIKE RK40C-WTGBTR.
DATA: L_POSID_OLD TYPE PS_POSID.
DATA: L_POSID_NEW TYPE PS_POSID.
DATA: LS_COBK LIKE COBK.
DATA: LT_ITEMS LIKE RK40C OCCURS 0 WITH HEADER LINE,
LT_COEP LIKE COEP OCCURS 0 WITH HEADER LINE,
LT_COEPL LIKE COEPL OCCURS 0 WITH HEADER LINE,
LT_COEPR LIKE COEPR OCCURS 0 WITH HEADER LINE,
LT_MESG LIKE MESG OCCURS 0 WITH HEADER LINE.
DATA: LV_NUM TYPE POSNR_ACC VALUE '1'.
DATA: CD_SEND_REC_REL LIKE COHEADER-SEND_REC_REL,
LD_STATUS LIKE RK23F-STATUS.
DATA: L_DYNNR LIKE FELD-DYNNR.
CLEAR : L_DATE,L_DATE1,L_DATE2,L_YEAR,L_MONTH.
L_DATE1 = SY-DATUM.
L_YEAR = L_DATE1(4).
L_MONTH = L_DATE1+4(2).
L_DATE = L_DATE1+6(2).
CONCATENATE L_DATE L_MONTH L_YEAR INTO L_DATE2 .
CASE R_UCOMM.
WHEN '&IC1'. "doubleclick
CHECK RS_SELFIELD-FIELDNAME = 'EBELN'.
READ TABLE G_T_FINAL INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
READ TABLE G_T_TEMP WITH KEY LOGNUM = G_T_FINAL-LOGNUM.
IF SY-SUBRC = 0.
MESSAGE I899(KB) WITH TEXT-004.
ELSE.
CLEAR : L_EBELN,L_EBELP,LS_COBK,LT_ITEMS,G_T_BDC,G_T_MESSAGE,
CD_SEND_REC_REL,LD_STATUS.
REFRESH: LT_ITEMS,G_T_BDC,G_T_MESSAGE.
SET PARAMETER ID 'BES' FIELD G_T_FINAL-EBELN.
GET PARAMETER ID 'BES' FIELD L_EBELN.
SET PARAMETER ID 'BSP' FIELD G_T_FINAL-EBELP.
GET PARAMETER ID 'BSP' FIELD L_EBELP.
SORT G_T_FINAL BY EBELN EBELP.
READ TABLE G_T_FINAL WITH KEY EBELN = L_EBELN
EBELP = L_EBELP
BINARY SEARCH.
IF SY-SUBRC = 0.
LS_COBK-KOKRS = G_T_FINAL-KOKRS.
LS_COBK-GJAHR = SY-DATUM+0(4).
LS_COBK-VRGNG = 'RKU1'.
LS_COBK-PERAB = SY-DATUM+4(2).
LS_COBK-PERBI = SY-DATUM+4(2).
LS_COBK-BLDAT = SY-DATUM.
LS_COBK-BUDAT = SY-DATUM.
LS_COBK-CPUDT = SY-DATUM.
LS_COBK-USNAM = SY-UNAME.
LS_COBK-WSDAT = SY-DATUM.
LS_COBK-KURST = 'M'.
LS_COBK-VARNR = '05SAP'.
LS_COBK-KWAER = G_T_FINAL-WAERS.
LS_COBK-CPUTM = SY-UZEIT.
CLEAR : L_POSID_OLD,L_POSID_NEW.
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_INPUT'
EXPORTING
INPUT = G_T_FINAL-POSID_NEW
IMPORTING
OUTPUT = L_POSID_NEW.
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_INPUT'
EXPORTING
INPUT = G_T_FINAL-POSID_OLD
IMPORTING
OUTPUT = L_POSID_OLD.
L_AMOUNT1 = G_T_FINAL-AMOUNT.
LT_ITEMS-ZLENR = LV_NUM.
LT_ITEMS-EPSPNR = L_POSID_NEW.
LT_ITEMS-SPSPNR = L_POSID_OLD.
LT_ITEMS-KSTAR = G_T_FINAL-KSTAR.
LT_ITEMS-WAERS = G_T_FINAL-WAERS.
LT_ITEMS-WTGBTR = L_AMOUNT1.
LT_ITEMS-WKGBTR = L_AMOUNT1.
APPEND LT_ITEMS.
CLEAR: LT_ITEMS.
* For reposting the Cost
CHECK NOT LT_ITEMS[] IS INITIAL.
CALL FUNCTION 'K40C_COBK_CHECK_POST'
CHANGING
ITCOBK = LS_COBK
EXCEPTIONS
PERIOD_BLOCKED = 1
EXTERNAL_NUMBER_MISSING = 2
ERROR_OCCURED = 3.
IF SY-SUBRC IS INITIAL.
CALL FUNCTION 'K40C_DOCUMENT_LINE_CHECK'
EXPORTING
DOC_HEADER = LS_COBK
IGNORE_WARNINGS = 'X'
TABLES
DOC_ITEMS = LT_ITEMS.
*...Create Tables for database
CALL FUNCTION 'K40C_DOCUMENT_CREATE'
EXPORTING
DOC_HEADER = LS_COBK
TABLES
DOC_ITEMS = LT_ITEMS
ITCOEP = LT_COEP
ITCOEPL = LT_COEPL
ITCOEPR = LT_COEPR.
CALL FUNCTION 'K40C_DOCUMENT_POST'
TABLES
ITCOEP = LT_COEP
ITCOEPL = LT_COEPL
ITCOEPR = LT_COEPR
CHANGING
DOC_HEADER = LS_COBK.
ENDIF.
ENDIF.
IF SY-SUBRC = 0.
GET PARAMETER ID 'KBXXN_P_VAR_RKU1' FIELD CD_SEND_REC_REL.
GET PARAMETER ID 'KBXX_START_DYNPRO' FIELD LD_STATUS.
IF CD_SEND_REC_REL IS INITIAL AND LD_STATUS IS INITIAL.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'COHEADER-SEND_REC_REL'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=PVAR'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'L'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RK23F-STATUS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=LISI'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ENDIF.
IF CD_SEND_REC_REL EQ '05SAP' AND LD_STATUS EQ 'S'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ELSEIF CD_SEND_REC_REL EQ '05SAP' AND LD_STATUS EQ 'L'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' L_DYNNR.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RK23F-STATUS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=LISI'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ELSEIF CD_SEND_REC_REL NE '05SAP' AND LD_STATUS EQ 'S'.
CASE CD_SEND_REC_REL.
WHEN '01SAP' OR '02SAP' OR '04SAP' OR '08SAP' OR '09SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
WHEN '03SAP' OR '07SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1230' .
WHEN '06SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1210'.
WHEN '10SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1270'.
ENDCASE.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' L_DYNNR.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'COHEADER-SEND_REC_REL'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=PVAR'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM BDC_FIELD USING 'RK23F-WAERS'
'EUR'.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ELSEIF CD_SEND_REC_REL NE '05SAP' AND LD_STATUS EQ 'L'.
CASE CD_SEND_REC_REL.
WHEN '01SAP' OR '02SAP' OR '04SAP' OR '08SAP' OR '09SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
WHEN '03SAP' OR '07SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1230' .
WHEN '06SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1210'.
WHEN '10SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1270'.
ENDCASE.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'COHEADER-SEND_REC_REL'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=PVAR'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'L'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RK23F-STATUS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=LISI'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ENDIF.
CALL TRANSACTION 'KB11N' USING G_T_BDC MODE G_MODE MESSAGES
INTO G_T_MESSAGE.
IF NOT G_T_MESSAGE[] IS INITIAL.
READ TABLE G_T_MESSAGE WITH KEY MSGTYP = 'S'.
IF SY-SUBRC = 0.
DELETE FROM BALHDR WHERE LOGNUMBER = G_T_FINAL-LOGNUM AND
OBJECT = G_T_FINAL-OBJECT AND
SUBOBJECT = G_T_FINAL-SUBOBJECT.
COMMIT WORK.
G_T_TEMP = G_T_FINAL.
APPEND G_T_TEMP.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
CLEAR G_T_MESSAGE.
REFRESH G_T_MESSAGE.
*refresh g_t_bdc.
CLEAR G_T_BDC.
REFRESH G_T_BDC.
ENDIF.
ENDCASE.
ENDFORM. " USER_COMMAND
Vasanth -
Can we call a bdc program from report program
hi
can we call a bdc program from report programYes you can any program from another program using
SUBMIT <repname> statement
SUBMIT <repname> USING SELECTION-SCREEN dynnr.
or
SUBMIT <repname> VIA SELECTION-SCREEN USING SELECTION-SET variant
SUBMIT <repname> VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar
etc.
Regards
Prax -
Can we call function module in sap script
hi
can we call function module in sap script
i want to use function module HR_TMW_GET_EMPLOYEE_NAME in sapscript
to get Empname by using personal no
pernr no is coming from bseg-pernr table
so how i can use it .
please help me
thanks in advanced.hi,
You can use like this:
PERFORM FUNCTION_MODULE IN PROGRAM SUBROUTINE_POOL
USING &FIELD1&
USING &FIELD2&
CHANGING &FIELD3&
ENDPERFORM.
where function_module is the func. module name defined in program SUBROUTINE_POOL , field1 n field2 are the fields to be passed, and field3 is the value which you want to display...
You have to read field1 & field2 in the pool, process them & get the value of field to be output.
Reward helpful answers.
Regards,
SIddhesh Sanghvi. -
How we can use call transaction xd03 in alv report
hey guys i want now that how we can use call transaction xd03 in alv report by using various tables in report or coding.
can you tell me about that by the way of coding so that it can be easy for me to understand and help ful to make report by using alv report with many tables. so please send me .
Moderator message: it seems to be XD03 day today, please search for available information/documentation/previous discussions.
Edited by: Thomas Zloch on Nov 25, 2011 1:24 PMWhere?
Max -
Displya image through SAP Report ?
Dear experts,
I have requirement to Display images witch is store in local PC, and the image output will display as sap report.
Each time user captures the image of material before entering, the material in our plant and this image is saving into the local image server and we have provided entry screen through which user can enter the local image server path, and this path is saving into the SAP tables.
Now we want to prepare a report to view these images in SAP from the local path.
Note: We are not saving these images in SAP server, only path of these images we are saving.
Please help me to solve this issue.
Thanks,
Abhilashhi ,
Full Program
*& Module Pool ZUPLOADIMAGE
*&Author: Tanmaya Gupta
*&Date: 24-09-09
*&Description: This Program will upload Image/Logo in the Module Pool Program.
INCLUDE ZUPLOADIMAGETOP . " global Data
INCLUDE ZUPLOADIMAGEO01 . " PBO-Modules
INCLUDE ZUPLOADIMAGEF01 . " FORM-Routines
*& Include ZUPLOADIMAGETOP Module Pool ZUPLOADIMAGE
PROGRAM ZUPLOADIMAGE.
DATA CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA PICTURE TYPE REF TO CL_GUI_PICTURE.
DATA URL(256).
*& Include ZUPLOADIMAGEO01
*& Module STATUS_0100 OUTPUT
* text
module STATUS_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
CREATE OBJECT CONTAINER
EXPORTING CONTAINER_NAME = 'CONTAINER'.
CREATE OBJECT PICTURE
EXPORTING PARENT = CONTAINER
EXCEPTIONS ERROR = 1.
CLEAR url.
PERFORM load_pic_from_db CHANGING url.
CALL METHOD picture->load_picture_from_url
EXPORTING
url = url.
endmodule. " STATUS_0100 OUTPUT
*& Include ZUPLOADIMAGEF01
*& Form LOAD_PIC_FROM_DB
* text
* <--P_URL text
form LOAD_PIC_FROM_DB changing p_url.
DATA query_table LIKE w3query OCCURS 1 WITH HEADER LINE.
DATA html_table LIKE w3html OCCURS 1.
DATA return_code LIKE w3param-ret_code.
DATA content_type LIKE w3param-cont_type.
DATA content_length LIKE w3param-cont_len.
DATA pic_data LIKE w3mime OCCURS 0.
DATA pic_size TYPE i.
REFRESH query_table.
query_table-name = '_OBJECT_ID'.
query_table-value = 'ZLOGO.GIF'."name of logo
APPEND query_table.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
TABLES
query_string = query_table
html = html_table
mime = pic_data
CHANGING
return_code = return_code
content_type = content_type
content_length = content_length
EXCEPTIONS
object_not_found = 1
parameter_not_found = 2
OTHERS = 3.
IF sy-subrc = 0.
pic_size = content_length.
ENDIF.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown
size = pic_size
lifetime = cndp_lifetime_transaction
TABLES
data = pic_data
CHANGING
url = url
EXCEPTIONS
OTHERS = 1.
ENDFORM. " LOAD_PIC_FROM_DB
Thanks
Tanmaya -
Can we call a transaction from a report
hi
can we call a transaction from a reporthi,
we can call
check it
*& Report ZSALESORDERDETAILS_ASHOK
REPORT ZSALESORDERDETAILS_ASHOK
NO STANDARD PAGE HEADING
LINE-SIZE 50
LINE-COUNT 35(5).
*data declaration.
tables :vbak.
tables: VBAP.
DATA : TVBAK LIKE VBAK OCCURS 0 WITH HEADER LINE,
TVBAP LIKE VBAP OCCURS 0 WITH HEADER LINE,
TEMP TYPE p decimals 5 VALUE '0.0' ,
A type i,
FIELDNAME TYPE STRING,
FIELDVALUE TYPE VBAP-VBELN.
DATA G_CB.
selection-screen begin of block screen1 with frame title TEXT-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /32(35) COMM1.
SELECTION-SCREEN ULINE /27(35).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS TVBELN FOR VBAK-VBELN.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /30(50) COMM2.
SELECTION-SCREEN ULINE /27(40).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS TERDAT FOR VBAK-ERDAT.
SELECTION-SCREEN SKIP.
selection-screen end of block screen1.
*Initialization
Initialization .
TVBELN-low = 4000.
TVBELN-high = 5000.
TVBELN-option = 'BT'.
TVBELN-sign = 'I'.
APPEND TVBELN.
TERDAT-low = '19960202'.
TERDAT-high = '20020302' .
APPEND TERDAT.
AT SELECTION-SCREEN .
SELECT *
FROM VBAK
INTO TABLE TVBAK
WHERE VBELN IN TVBELN AND erdat IN Terdat .
IF sy-subrc ne 0.
MESSAGE 'ENTERED ORDER NOT FOUND' type 'E'.
ENDIF.
START-OF-SELECTION.
REFRESH TVBAK.
SELECT *
FROM VBAK
INTO TABLE TVBAK
WHERE VBELN IN TVBELN AND ERDAT IN TERDAT.
END-OF-SELECTION.
LOOP AT TVBAK.
WRITE: /2 SY-VLINE,
TVBAK-VBELN INPUT ON ,
15 SY-VLINE,TVBAK-ERDAT hotspot on,
30 SY-VLINE, 35 TVBAK-ERNAM,
46 SY-VLINE,
g_cb AS CHECKBOX.
ENDLOOP.
A = SY-LINCT - SY-LINNO - 1.
SKIP A .
RESERVE A LINES.
AT SELECTION-SCREEN OUTPUT.
comm1 ='SELECT SALES ORDER RANGE'.
comm2 ='SELECT SALES ORDER CREATION DATE'.
TOP-OF-PAGE.
ULINE.
WRITE /15 ' SALES ORDER REPORT ' COLOR = 1 .
ULINE.
WRITE : /7 ' VBELN ' COLOR = 5 ,
19 ' ERDAT ' COLOR = 5,
34 ' ERNAM ' COLOR = 5.
ULINE.
END-OF-PAGE.
IF SY-LSIND = 0.
ULINE.
WRITE : /2 'NUMBER OF LINE IN THIS PAGE = ', SY-LINNO.
SKIP.
WRITE: /30 'PAGE NUMBER = ', SY-PAGNO.
ULINE.
ELSEIF SY-LSIND = 1.
ULINE.
WRITE : /12 'TOTAL PRICE = ' ,TEMP.
CLEAR TEMP.
SKIP.
WRITE : /30 'PAGE NUMBER = ', SY-PAGNO.
ULINE.
ENDIF.
at line-selection.
GET CURSOR FIELD FIELDNAME VALUE FIELDVALUE.
IF FIELDNAME = 'TVBAK-VBELN'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = FIELDVALUE
IMPORTING
OUTPUT = FIELDVALUE.
WINDOW STARTING AT 60 2 ENDING AT 120 25.
IF SY-LSIND = 1.
SELECT
FROM VBAP
INTO TABLE TVBAP
WHERE VBELN EQ FIELDVALUE.
LOOP AT TVBAP.
TEMP = TEMP + TVBAP-NETPR.
WRITE : /2 SY-VLINE, TVBAP-matnr,
17 SY-VLINE,TVBAP-VBELN,
30 SY-VLINE,TVBAP-NETPR currency 'IN',
49 SY-VLINE.
ENDLOOP.
ULINE.
A = SY-LINCT - SY-LINNO - 1.
SKIP A .
RESERVE A LINES.
ENDIF.
<b>ELSEIF SY-LSIND = 2.
call transaction 'MM01' .
ENDIF.</b>
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE : / SY-ULINE,
/7 ' DETAIL OF GIVEN SALES ORDER ' COLOR = 5,
/ SY-ULINE,
/4 'MATNR',
22 'VBELN',
35 'NETPR',
/ SY-ULINE.
Regards
ASHOK
Message was edited by:
ASHOK KUMAR -
How can we call a transaction from a report?
hi
experts can u help me for thischeck this:
CHECK sy-ucomm = '&IC1'.
CASE sy-ucomm.
WHEN 'MATNR'.
READ TABLE it_final INDEX selfield-tabindex.
IF sy-subrc EQ 0.
SET PARAMETER ID 'MAT' FIELD it_final-matnr.
SET PARAMETER ID 'WRK' FIELD it_final-werks.
SET PARAMETER ID 'LAG' FIELD it_final-lgort.
SET PARAMETER ID 'CHA' FIELD it_final-charg.
CALL TRANSACTION 'MMBE' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
In this case, if ur report has material code(matnr), plant(werks), storage location(lgort), batch(charg) as the output fields and u click on the material, then it will display the details of that material for the T- code MMBE.
reward points if useful.
Message was edited by: anju
anju sinha -
CAN i CALL OLAP DML THROUGH JDBC IN JAVA PROGRAM
I HAVE ORACLE V 9.2.0.1.0 AND AFTER CREATING A CUBE FROM ENTERPRISE CONSOLE I HAVE TO GO WITH EITHER SQL PACKAGES OR OLAP DML PROGRAMS ,SO PLS GIVE ME PROPER WAY AND LINK OF SOURCES TO WORK WITH OLAP DML IN JAVA PROGRAMS
CAN I USE AS PREPARED STATEMENT OR CREATE STATEMENT IN JAVA
TO CALL OLAP DML? BECAUSE NORMALLY WE MUST USE OLAP WORKSHEET TO EXECUTE OLAP COMMANDS
Message was edited by:
user594151The access OLAP objects via Java you have two options. You can code directly against the OLAP API and I think someone has already provided you with the link to the supporting documentation. The OLAP API docs provide worked examples on access OLAP metadata and retrieving OLAP data. However, this is extremely low level coding. An alternative is to use the Business Intelligence Beans. Oracle Business Intelligence Beans enables developers to productively build business intelligence applications that take advantage of the rich OLAP functionality in the Oracle database. OracleBI Beans includes presentation beans - graph and crosstab, data beans - query and calculation builders and persistence services, which may be deployed in both HTML client and Java client applications. OracleBI Beans is seamlessly integrated into Oracle JDeveloper to provide the most productive development environment for building custom BI applications. For more information goto the the BI Beans home page
http://www.oracle.com/technology/products/bib/index.html
Specifically on executing OLAP DML see the following example:
Developing a Dashboard Application with Oracle BI Beans:
http://www.oracle.com/technology/products/bib/1012/viewlets/MS%20Developing%20Executive%20Insight.html
Adding controls to execute OLAP DML This viewlet demonstrates how to quickly and easily add the controls to execute OLAP DML models that can be executed to update the What If presentation.
http://www.oracle.com/technology/products/bib/1012/viewlets/Pages/What_If_Analysis_Part_4_viewlet_swf.html
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/ -
How can I call remote ejb through jsp?(null)
Trying the code:
<%@ page import="si3.*,javax.ejb.*,javax.naming.*,java.util.*,java.rmi.RemoteException" %>
<%
int h=8;
int w=8;
Hashtable p = new Hashtable ();
p.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
p.put(Context.PROVIDER_URL,"t3://192.168.0.203:7001");
Context ctx= new InitialContext(p);
Object homeref = ctx.lookup("si3.test");
addHome home = (addHome) PortableRemoteObject.narrow(homeref, addHome.class);
add the_ejb = home.create();
out.println(the_ejb.add(h,w));
out.println("adf");
the_ejb.remove();
%>
yzj wrote:
> I have two server running weblogic5.1.
> If the jsp and ejb locate the same server running weblogic 5.1 ,works well .But one deploys the ejb (jndi name si3.test),the other runs the jsp.I use jsp call the remote ejb ,catch exception :
>
> GMT+08:00 2000:<E> <ServletContext-General> Root
> > cause of ServletException
> > javax.naming.NameNotFoundException: 'si3.test'; remaining name 'si3.test'
> > at
> > weblogic.jndi.toolkit.BasicWLContext.resolveName(BasicWLContext.java,
> > Compiled Code)
> > at
> > weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:133)
> > at
> > weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:574)
> > at javax.naming.InitialContext.lookup(InitialContext.java:349)
> > at jsp_servlet.client._jspService(client.java:90)
> > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> > at
> > weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> > :124)
> > at
> > weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> > l.java:744)
> > at
> > weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> > l.java:692)
> > at
> > weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
> > Manager.java:
> > 251)
> > at
> > weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
> > at
> > weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
> > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
> > Code)
>
> Why? Can you help me? Thanks.
> The jsp's source(Client.jsp ):
> <%@ page import="si3.*,javax.ejb.*,javax.naming.*,java.util.*,java.rmi.RemoteException" %>
> <%
> int h=8;
> int w=8;
> Hashtable p = new Hashtable ();
> p.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
> p.put(Context.PROVIDER_URL,"t3://192.168.0.203:7001");
> Context ctx= new InitialContext(p);
> addHome home = (addHome) ctx.lookup("si3.test");
> add the_ejb = home.create();
> out.println(the_ejb.add(h,w));
> out.println("adf");
> the_ejb.remove();
> %>
>
>
[att1.html]
-
How can I call DLL's Through Forms5.0
I've done the following exercise for calling DLL's
I tried to put thier dll in orant/bin directory but unable to get the values from DLL. I used user_exit D2K built in function but not able to get the result..
Ex:
DLL is = api1.dll
This dll having n number of functions in that one of the function is GetUid..This contain one in parameter which will take length of userid and one out parameters which will return Userid from DLL..
The syntax I used in D2K is as follows.
First I hv put this dll in orant/bin directory
and used following syntax in D2K
user_exit('GetUID(:global.uid,20)');
But it was dispalying the msg GetUID does not exist..
I have put one entry in registry like FORM50_USEREXITS orant/bin/api1.dll.
But the same error repeats..
Please revert as to how I can go about it.
nullAssuming that you don't need to do anything with that pointer aside from pass it around, you can declare that parameter as a "ByVal Long image" in your declaration. Declare a variable (as a Long) to pass in to the image parameter.
-
Can i call a webService through Swing
Hii Javaites
I am developing a appliction where the client can be offline, , while he is offliline , he can do certain things like fill timesheets.Later on when he connects to net , and when he goes to my site , he can upload his timesheets to a webservice.
So for achieving this , i ma planning to make the client side(offline component ) in SWING , and when he connects to net , he can synchronize his timesheets with the database , on the server.
So i wnt 2 know , tht is this approach right and possible.
is there any other way 2 go about it.well, whether the approach is right or wrong, depends on your business needs. But it is possible to connect to a web service from a java application.
~Debopam -
Can we call screen from ALV report
Hi All,
I am in the process of creating a stand alone application. However I have stuck up here.
Problem: Can we call any screen from ALV report? If yes then how??? Can anyone give some code snippet??
All your help appreciated.
Thanks,
JigneshHello Jignesh,
Here is an example, when you double click on a line, it pops with with another screen that holds details for the flight information.
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click FOR EVENT double_click
OF cl_gui_alv_grid
IMPORTING e_row
e_column.
ENDCLASS. "lcl_event_handler
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
READ TABLE it_flight INTO wa_flight INDEX e_row-index.
IF sy-subrc EQ 0.
SELECT * FROM sbook
INTO TABLE it_book
WHERE carrid EQ wa_flight-carrid AND
connid EQ wa_flight-connid.
CALL SCREEN 101 STARTING AT 10 10.
ENDIF.
ENDMETHOD. "HANDLE_DOUBLE_CLICK
ENDCLASS. "LCL_EVENT_HANDLER
MODULE status_0101 OUTPUT.
Variant to save the layout
gv_repid = sy-repid.
IF g_custom_container2 IS INITIAL.
Create an instance for Custom Container 'ALV_GRID'
CREATE OBJECT g_custom_container2
EXPORTING container_name = gs_container2.
Create an instance for ALV Grid
CREATE OBJECT g_grid2
EXPORTING i_parent = g_custom_container2.
Variant to save the layout
gs_layout-grid_title = 'Flight Bookings'.
CALL METHOD g_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'SBOOK'
is_layout = gs_layout
CHANGING
it_outtab = it_book[].
ELSE.
CALL METHOD g_grid2->refresh_table_display.
ENDIF. "IF grid2 IS INITIAL.
Setting focus for created grid control
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = g_grid2.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " status_0101 OUTPUT
Refer to BC_ALV_GRID04 for ALV data declarations used in the above piece of code.
Maybe you are looking for
-
Ever since I updated iTunes my iPods will not sync with my cars
Ever since I updated iTunes my iPods will not sync with my cars.I have a 30g and 60g 5th gen iPods that I use in my two car. In my cars I have a dealer installed integration module so that I can navigate my I pods play list artist and song titles usi
-
Resolution in dialog box is too large in Acrobat XI
I recently did an update to Adobe, however now, anything that uses Adobe is now in SUPER LARGE resolution. My computer and all other programs have correct resolution, and even the File, Edit, View.... toolbar across the top are the correct size. Bu
-
I have and bought 25G.B. on my iPad but when I want to download something it says I don't have enough room what gives??
-
Plz Help note: the instalation is over ESX and VMware
-
Hello All, Oracle Version: 11.0.2.1.0 Edition: SE1 Data Gaurd is not supported in SE1 so it is not possible to switchover. Can i change the IP of the Standby to Primary and make the stand by database as Primary database. Can anyone help please