Can we change the name of reassign button in sharepoint 2010 approval workflow?

can we change the name of reassign button in sharepoint 2010 approval workflow?
Shazil Ali

Yes, we can change it. Steps are as follows: 1. Create the workflow in SharePoint Designer 2010 2. Use Start Approval Process action 3. Write your logic and all setting as per you requirement and then publish the workflow once. 4. After this, click on
the workflow name and there you will see the sections as Workflow Information, Customization, Settings, Start Options, Forms. Here you will see a form under Forms section with a name of Approval_x00....... with a type "Task". Click on this form. This form
is an Infopath form that opens up when a task is to be edited (Task Form). This form will open up in Infopath (provided you have Infopath installed on your system) It may ask you the crendentials for security. 5. The task form will open up in Infopath for
editing. Click on the Reasign button and in the top left corner in the ribbon section is the field (Label) having text as "Reassign Task". Change this and then save and publish the form.Publish the workflow once again.

Similar Messages

  • How can I change the name of item in TableViewController iOS

    How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
    //  ViewController.m
    //  Movie List
    //  Created by Damian on 20/02/15.
    //  Copyright (c) 2015 Tika Software. All rights reserved.
    #import "ViewController.h"
    @interface ViewController ()
    These outlets to the buttons use a `strong` reference instead of `weak` because we want
    to keep the buttons around even if they're not inside a view.
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
    // A simple array of strings for the data model.
    @property (nonatomic, strong) NSMutableArray *dataArray;
    @end
    #pragma mark -
    @implementation ViewController
    - (void)viewDidLoad
        [super viewDidLoad];
         This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
        self.tableView.allowsMultipleSelectionDuringEditing = YES;
        // populate the data array with some example objects
        self.dataArray = [NSMutableArray new];
        NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
        for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
            NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
            [self.dataArray addObject:itemName];
        // make our view consistent
        [self updateButtonsToMatchTableState];
    #pragma mark - UITableViewDelegate
    - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
        return self.dataArray.count;
    - (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
        // Update the delete button's title based on how many items are selected.
        [self updateDeleteButtonTitle];
    - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
        // Update the delete button's title based on how many items are selected.
        [self updateButtonsToMatchTableState];
    - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
        // Configure a cell to show the corresponding string from the array.
        static NSString *kCellID = @"cellID";
        UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
        cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
        return cell;
    #pragma mark - Action methods
    - (IBAction)editAction:(id)sender
        [self.tableView setEditing:YES animated:YES];
        [self updateButtonsToMatchTableState];
    - (IBAction)cancelAction:(id)sender
        [self.tableView setEditing:NO animated:YES];
        [self updateButtonsToMatchTableState];
    - (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
        // The user tapped one of the OK/Cancel buttons.
        if (buttonIndex == 0)
            // Delete what the user selected.
            NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
            BOOL deleteSpecificRows = selectedRows.count > 0;
            if (deleteSpecificRows)
                // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
                NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
                for (NSIndexPath *selectionIndex in selectedRows)
                    [indicesOfItemsToDelete addIndex:selectionIndex.row];
                // Delete the objects from our data model.
                [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
                // Tell the tableView that we deleted the objects
                [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
            else
                // Delete everything, delete the objects from our data model.
                [self.dataArray removeAllObjects];
                // Tell the tableView that we deleted the objects.
                // Because we are deleting all the rows, just reload the current table section
                [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
            // Exit editing mode after the deletion.
            [self.tableView setEditing:NO animated:YES];
            [self updateButtonsToMatchTableState];
    - (IBAction)deleteAction:(id)sender
        // Open a dialog with just an OK button.
        NSString *actionTitle;
        if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
            actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
        else
            actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
        NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
        NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
        UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
                                                                 delegate:self
                                                        cancelButtonTitle:cancelTitle
                                                   destructiveButtonTitle:okTitle
                                                        otherButtonTitles:nil];
        actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
        // Show from our table view (pops up in the middle of the table).
        [actionSheet showInView:self.view];
    - (IBAction)addAction:(id)sender
        [self.dataArray addObject:@"New Movie"];
        // Tell the tableView about the item that was added.
        NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
        [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
                              withRowAnimation:UITableViewRowAnimationAutomatic];
        // Tell the tableView we have finished adding or removing items.
        [self.tableView endUpdates];
        // Scroll the tableView so the new item is visible
        [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
                              atScrollPosition:UITableViewScrollPositionBottom
                                      animated:YES];
        // Update the buttons if we need to.
        [self updateButtonsToMatchTableState];
    #pragma mark - Updating button state
    - (void)updateButtonsToMatchTableState
        if (self.tableView.editing)
            // Show the option to cancel the edit.
            self.navigationItem.rightBarButtonItem = self.cancelButton;
            [self updateDeleteButtonTitle];
            // Show the delete button.
            self.navigationItem.leftBarButtonItem = self.deleteButton;
        else
            // Not in editing mode.
            self.navigationItem.leftBarButtonItem = self.addButton;
            // Show the edit button, but disable the edit button if there's nothing to edit.
            if (self.dataArray.count > 0)
                self.editButton.enabled = YES;
            else
                self.editButton.enabled = NO;
            self.navigationItem.rightBarButtonItem = self.editButton;
    - (void)updateDeleteButtonTitle
        // Update the delete button's title, based on how many items are selected
        NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
        BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
        BOOL noItemsAreSelected = selectedRows.count == 0;
        if (allItemsAreSelected || noItemsAreSelected)
            self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
        else
            NSString *titleFormatString =
            NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
            self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
    @end

    Hey JB001,
    Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/TS4062
    If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Regards,
    -Norm G.

  • I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync each phone separately

    I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync contacts separately?

    How to rename your device in iTunes

  • How can I change the name of a Materialized View?

    How can I change the name of a Materialized View?

    Oracle permitted renaming the snapshot in the earlier versions of 8i. However, it does not permit renaming the materialized view in 9i or 10g.
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP and Data Mining options
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
    With the Partitioning option
    JServer Release 9.2.0.3.0 - Production

  • How can I change the name of a computer I'm getting rid of?

    How can I change the name of the computer to my granddaughter's name? It's now called "My name" G5 iMac. I would also like to delete that computer icon in my Devices on my MacbookPro.

    I guess my reply to these questions in your other topic did not help?
    The name of the computer is in System Preferences Sharing pane.
    If something appears under DEVICES in a Finder window sidebar, you can click hold on it and drag it off the sidebar. If it appears under SHARED, it should no longer appear there once if that iMac is no longer on your local network, or if you turn off its shared services in the Sharing pane.

  • How can I change the name of a PDF in the bookcase

    How can I change the name of a PDF in the bookcase

    Hi,
    It is possible to edit the dictionary, but not recommended.
    It is recommended to use exp/imp to "rename" a schema
    HTH
    Laurent

  • How can I change the name of a Sub Circuit in Multisim

    How can I change the name of a sub-circuit in MultiSim?  
    For example:
    I have a sub-circuit named "Output Channel 1" and its RefDes is SC1.  How do I change its name to 'Input Channel 1'?

    Hi,
    If what you want to change is the RefDes you can do it by right-clicking the sub-circuit and selecting properties. If what you want to change is the name, you can right-click the sub-circuit in the Design Toolbox.

  • How can i change the name in information of my  i pod

    my friend gave me her i pod , because she bought a the bigger GB i pod.
    but when i turn on the computer which is connected with i pod,  whenever the update comes it keep show me " her name" and give the direction.
    also , i looked in pod information in my i pod. it has still her name.
    ( the information of i pod shows  how many songs have, how many pictures, videos, programes...etc)
    can i change the name?
    my friend says she is not sure how to do it.

    http://support.apple.com/kb/HT3965

  • How can I change the name of my Mac from old company to my new one, How can I change the name of my Mac from old company to my new one

    How can I change the name of my Mac.  I am using it with a different company now and told want the old company name showing up on emails etc.

    Thanks.  When I rep;y to an email I get this
    SOS Medical <[email protected]>
    I would like to replace the SOS Medical with my company name

  • How can i change the name of my wifi connection on my Airport express?

    The name of my wifi is Réseau de Francois with an accent on the letter E.
    Now, i have many conflict with other electronic components because they do not accept french accent.
    How can if change the name to reseau de francois without an accent on the letter E on my airport express 4th or 5th generation
    thanks

    airport utility in the utilities folder.

  • How can i change the name in my iphone

    How can i change the name in my iphone after i registered it

    If you mean the name you assigned to it, then connect it to your computer, open iTunes, click in the name of the device in the iTunes sidebar, press RETURN to activate the field, change the name, press RETURN again.

  • I used part of my name in my home network.  Now I understand this was stupid security error.  How can i change the name of my home wifi network, airport express?  Thanks.

    I used part of my name in my home network.  Now I understand this was stupid security error.  How can i change the name of my home wifi network, airport express?  Thanks.

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the picture of the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Edit the Wireless Network Name
    Keep it short.....maximum 10-12 characters or so. No blank spaces or punctuation marks in the name
    Click Update at the lower right of the window to save the new setting and wait a full minute for the AirPort to restart

  • How can I change the name of my home folder?

    Just got a new job. Yeah! Taken over former employees' iMac. I made myself Administrator, seem to be the only log in option. But, my home folder is still in the old guys name. How can I change the name on the Home folder without deleting it and loose all the files? CAN'T loose the files?  Help...
    Thanks

    Changing the existing home folder name is complicated. I recommend you NOT do that.
    Instead, create a new User with exactly the home folder name you want, and copy your files over to that new user. Once a few days have gone by trouble-free, and you are certain you have no issues, you can delete the old home folder.
    While on the subject of users, Some users prefer the peace-of-mind of using an "ordinary" user account, rather than an Admin account for daily use. This makes it much harder for anything to "sneak" onto your Mac, as you need to authenticate anything to be installed in system directories.
    To do this, create a new Admin user, log into it, and demote your daily-use account to a non-Admin user. When actively installing stuff, the Admin username and password will be requested.

  • Used ipod how can i change the name on it

    hey guys i bought a used ipod off of a buddy of mine who upgraded to a 80gb like my own the ipod i bought is a 2gb nano how can i change the name of the 2gb ipod

    have a read
    http://docs.info.apple.com/article.html?artnum=60952

  • I can't change the name of the track in iTunes on my iMac OSX10

    I can't change the name of the track in iTunes on my iMac ox10 . I tried the iTune's Help & read a few answers on this site , but none seems to be working . I  go to Info & & press Ok & the name changes in itune , but when I enter the same track to itune again, I get the old name back again. I have no problen in widows7 , I either go to info or I just highlight the track & copy paste the name I want , but I can't do the the same on mac.
    Pls help
    Thanks

    Go to \Music\ abnd find the iTunes folder.
    Right click - Properties.
    Make sure it is not Read Only.
    Also, make sure you have full *Read/Writes permissions* to the iTunes folder and all contents.
    Select the \Music\iTunes\ folder and see this -> http://paulstamatiou.com/how-to-quickie-vista-permissions

Maybe you are looking for