Can we delete a single row in SID table?
I am having a problem with conversion exit in SID table.
These are the error messages.
Value in SID table is TPV; correct value is TPV; SID in SID table is 875
Message no. RSRV200
Diagnosis
The following data record either has an incorrect internal format or the characteristic value that is in the correct format appears as a corrected value of another incorrect value:
· Characteristic value: TPV
· SID: 875
· Correct characteristic value: (see below) TPV
· SID after correction: 875
Value in SID table is TPV 2008; correct value is TPV; SID in SID table is 2887
Message no. RSRV200
Diagnosis
The following data record either has an incorrect internal format or the characteristic value that is in the correct format appears as a corrected value of another incorrect value:
· Characteristic value: TPV 2008
· SID: 2887
· Correct characteristic value: (see below) TPV
· SID after correction: 875
Now the row with SID 875 is causing the problem. Is it possible that I can delete only this row in the SID table.
Thanks for your help
Subra
Hi.....
Procedure :
RSA1>>>InfoObjects >>Right Click on InfoObject >>delete Master Data >> u can see the option of deleting SIDs............
Otherwise........u can delete value from a SID table......u can use tcode SE14...........to delete the entries.........
Check this......
deleting contents of SID table.
But still I will suggest u not to delete SID...........it may lead to inconsistency of data.........
Try to repair SId using the program : RSDMD_CHECKPRG_ALL or RSRV...........
Regards,
Debjani......
Similar Messages
-
How can I delete a single song from my iPad?
How can I delete a single song from my iPad?
Hi lizdance40,
The first part of your answer worked great, thanks for that! However, since doing that, there are still songs on the iPad that I want to delete. I place my finger on the song, swipe to the left....and nothing. No red "delete" appears at the right. That used to work on my full size iPad, but not on this mini. I just purchased it last Friday...maybe it's defective?
Thanks again,
Sirsheila -
Adobe form from webdynpro : Getting a single row in the table
Hello,
I have a scenario in which I have to create a adobeform from webdynpro application.
I have created the form and have the context designed in place.
I am facing a problem in the table I have in my adobeform.
I am adding rows to this table dynamically using a button using "addInstance"
Now on the webdynpro side , when I try to read this table I get a single row from this table.
This row is always the first row of that table.
I checked the following things from blog /people/juergen.hauser2/blog/2006/09/12/avoiding-common-mistakes-when-using-tables-on-sap-interactive-forms , i.e. :
Cardinality of the node.
Tick on the option "Repeat Row for Each Data Item".
But still no success.
With deadlines to catch I had to post this question after trying a lot.Please help.Hello Otto,
I had found this link before and used the same solution , but unfortunately is taking a long time.
Now what I am doing is :
1. I append 10 rows into the table then bind it to the node
2. Then on the adobe form I have removed the check on "Add row for each line item" because of which it shows only 1 row
on the form.
Now I add rows dynamically, but this puts a limit on the number of rows can be added to the table i.e. 10.
But this again has added problems like while displaying the form or modifying I hav to handle it seperately and cannot use the same form as it is.( as I have removed the tick for "Add row for each line item" ).
Thanks,
Omkar Mirvankar -
How to delete a particular row in ALV table
Hi,
How to delete a particular row in ALV table based on some condition(by checking value for one of the columns in a row)
Thanks
Bala DuvvuriHello Bala,
Can you please be a bit more clear as to how you intend to delete the rows from your ALV? By the way deleting rows from an ALV is no different from deleting rows from a normal table. Suppose you have enabled selection property in ALV & then select multiple rows and click up on a button to delete the rows then below would be the coding: (Also keep in mind that you would have to maintain the Selection property of the context node that you are binding to your ALV to 0..n)
data : lr_table_settings TYPE REF TO if_salv_wd_table_settings,
lr_config TYPE REF TO cl_salv_wd_config_table.
lr_table_settings ?= lr_config.
** Setting the ALV selection to multiple selection with no lead selection
lr_table_settings->set_selection_mode( value = cl_wd_table=>e_selection_mode-multi_no_lead ).
Next delete the selected rows in the action triggered by the button:
METHOD onactiondelete_rows .
DATA: wd_node TYPE REF TO if_wd_context_node,
lt_node1 TYPE ig_componentcontroller=>elements_node,
wa_temp TYPE REF TO if_wd_context_element,
lt_temp TYPE wdr_context_element_set,
row_number TYPE i VALUE 0.
wd_node = wd_context->get_child_node( name = 'NODE' ).
CALL METHOD wd_node->get_selected_elements
RECEIVING
set = lt_temp.
LOOP AT lt_temp INTO wa_temp.
wd_node->remove_element( EXPORTING element = wa_temp ).
ENDLOOP.
CALL METHOD wd_node->get_static_attributes_table
EXPORTING
from = 1
to = 2147483647
IMPORTING
table = lt_node1.
wd_node->bind_table( new_items = lt_node1 ).
ENDMETHOD.
If in case this isn't your requirement please do let me know so that I can try come up with another analysis.
Regards,
Uday -
Two radio buttons in a single row of a table
Hi All,
Can we have two radio buttons in a single row of ADF TABLE.
My requirement is that i have a list of submitted records. The user can approve or reject the records.
All the records are displayed in the table. there will be two columns in the table(Approve , Reject) The user can approve the first record and reject the second record and so on....
using table selectOne we can select only one row. Using radio buttons how to select the multiple records, at the same time grouping is done between the two columns(radio buttons) in the tableHi,
I don't think that you can do this with radio buttons. The usecase is more for chackboxes. It would have been a usecase for radio buttons if there was a single column with 3 possible options
- pending
- approved
- rejected
Frank -
How can i explicitly lock a row of a Table
Hi
How can we implement optimistic locking , i am using Oracle as Database for my Application .
Assume that i am working on a single row of a Table .
Now please tell me how can i explicitly lock this row , so that other simultanoues users insert or update operations are not affected to this particular row .
I am not using any ORM related technology
Please help .raviprivate wrote:
Hi
How can we implement optimistic locking , i am using Oracle as Database for my Application .
Assume that i am working on a single row of a Table .
Now please tell me how can i explicitly lock this row , so that other simultanoues users insert or update operations are not affected to this particular row .Either you want optimistic locking which does not use (database) locks at all, or you want pessimistic locking which does use database locks.
In optimistic locking everyone is allowed to read and to update without taking out a lock. Usually the optimistic lock is realised by including either a 'version' or 'last_modified' column which with every update is either increased (version) or set to the current_timestamp (last_modified). The update statement must be issued with a condition including that column (eg UPDATE ... WHERE id=<id> AND version=<version at time of read>). If the column was already changed by another user or process zero rows will have been updated signalling to the program that another user already changed the row and the user must redo his changes, or a more complex method of change comparison can be done. -
ADF: How to get the attributes' values of one single row from a table?
Currently I have a table with 3 attributes, suppose A,B and C respectively. And I've added an selectionListener to this table. That means when I select one single row of this table, I wish to get the respective value of A, B and C for that particular row. How do I achieve this?
suppose the method is like:
public void selectionRow(SelectionEvent se) { //se is the mouse selection event
.......??? //what should I do to get the values of A\B\C for one single row?
Edited by: user12635428 on Mar 23, 2010 1:40 AMHi
Assuming you are using Jdev 11g.
Try with this
public void selectionRow(SelectionEvent se) {
String val = getManagedBeanValue("bindings.AttributeName.inputValue");
public static Object getManagedBeanValue(String beanName) {
StringBuffer buff = new StringBuffer("#{");
buff.append(beanName);
buff.append("}");
return resolveExpression(buff.toString());
public static Object resolveExpression(String expression) {
FacesContext facesContext = getFacesContext();
Application app = facesContext.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = facesContext.getELContext();
ValueExpression valueExp =
elFactory.createValueExpression(elContext, expression,
Object.class);
return valueExp.getValue(elContext);
Vikram -
How can we delete the data in e-fact table.
how can we delete the data in e-fact table.
hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha -
How can we pass the entire rows of a table to a web service in a VC model ?
Hi,
On the click of the submit button, I have to pass the rows of two tables into an enterprise service. This service also takes other fields of a form as an input.
How can we pass the entire rows of a table into a service ?
Regards,
NitinHi Nitin,
It seems that you have two or three different structures to pass data using your webservice. In your main question, two tables, you can join both in one table and from there call the webservice. In order to pass the entire table you need:
1. Draw a line between your joinned table and your service,
2. Map the fields,
3. Create a 'SUBMIT' in your table tool bar. Right click on your table and choose 'Create Toobar', '+', name and choose 'Submit' as your event.
4. Go to Configure Element (Table View) 'Multiple' at Selection Mode.
Reward points if helps you to solve your question.
Regards,
Gilson Teixeira -
Deleting a single row in a report using checkbox
Hi,
Can anyone please help me on how to perform a deletion of a single row/multiple rows in a report when one clicks on a checkbox ..
I went throught the HOWTO's guide .. But when i select a checkbox and say delete i get the following error:
ORA-20001: Error in multi row delete operation: row= 12, ORA-01403: no data found,
Waiting for your replies soon
Thanks in advance
Rakeshjabalsad wrote:
Hi,
I am fairly new to JSF so please bear with me if the answer is obvious :D. I'm using a dataTable component to display data from a database and would like to add a commandLink component to every row in the table that deletes that row from the database. What is the most effective way of doing this?
I'm thinking of using a ListDataModel with some function that removes the correct row (though I'm not sure how it will tie in with a commandLink and exactly where the database will be updated). I'll appreciate any pointers or perhaps even an online example of something similar.
Alternatively I suppose you could pass an "id" parameter on with the commandLink that somehow gets read in the request and the appropriate row is removed accordingly. This solution seems cumbersome however.Yes, your instincts are correct there. Binding the data model to a backing bean to get the UIData instance for the table. Then use UIData.getRowData() to get the object corresponding to the row containing the link/button. Then execute your business logic to delete the row from the database. Then you need to ensure the data model is updated to reflect the new state of the database. -
How can I delete a single password stored in Sync?
I entered a password that i don't want to be stored online. How can one remove that single password? thx for replying...
My page was blank. I took your suggestion and added some text. When I deleted all of the text the page deleted too. Thanks!!!!
Spencer -
Can't delete newly added row in inner advanced table
Hi!
Im using advanced in advanced table and i can't delete a row after i added in detail table, i have to refresh the page in order to delete the row.
This is what i do.
execute query from master table
expand row in master table
click Add row button in detail table(standard button in footer)
add data in columns
click save button
select row with multiselect and then click delete button but nothing's happend i just can delete older rows
also i can't edit the new row just older rows.
i think that is something wrong with the cache :S
any ideas?
thanks!
Edited by: 892088 on 03-nov-2011 16:06still no answers, the problem is with the new row created because i cant delete or modify it.
any comment? -
Deleting a single row from a dataTable / database
Hi,
I am fairly new to JSF so please bear with me if the answer is obvious :D. I'm using a dataTable component to display data from a database and would like to add a commandLink component to every row in the table that deletes that row from the database. What is the most effective way of doing this?
I'm thinking of using a ListDataModel with some function that removes the correct row (though I'm not sure how it will tie in with a commandLink and exactly where the database will be updated). I'll appreciate any pointers or perhaps even an online example of something similar.
Alternatively I suppose you could pass an "id" parameter on with the commandLink that somehow gets read in the request and the appropriate row is removed accordingly. This solution seems cumbersome however.jabalsad wrote:
Hi,
I am fairly new to JSF so please bear with me if the answer is obvious :D. I'm using a dataTable component to display data from a database and would like to add a commandLink component to every row in the table that deletes that row from the database. What is the most effective way of doing this?
I'm thinking of using a ListDataModel with some function that removes the correct row (though I'm not sure how it will tie in with a commandLink and exactly where the database will be updated). I'll appreciate any pointers or perhaps even an online example of something similar.
Alternatively I suppose you could pass an "id" parameter on with the commandLink that somehow gets read in the request and the appropriate row is removed accordingly. This solution seems cumbersome however.Yes, your instincts are correct there. Binding the data model to a backing bean to get the UIData instance for the table. Then use UIData.getRowData() to get the object corresponding to the row containing the link/button. Then execute your business logic to delete the row from the database. Then you need to ensure the data model is updated to reflect the new state of the database. -
How can I delete a single unwanted page in a Pages document?
I'm unable to delete a single unwanted page from a document.
My page was blank. I took your suggestion and added some text. When I deleted all of the text the page deleted too. Thanks!!!!
Spencer -
WHen I updated my IPhone 5s to IOS 8 I can't delete some of the conversations, i have to delete all message.
You cannot currently do this at all.
It is all or nothing.
Reportedly this will be a feature of ios 5.
Maybe you are looking for
-
Replacement iPad 4th generation WIFI/3G saying no SIM CARD and unable to restore previous settings
-
Time Capsule Backup to NEW MacBook Pro
I'm selling my MacBook Pro and will get a new one soon. I have been backing up this MacBook Pro using my 1TB Time Capsule. Can I restore my NEW MacBook Pro using the backup from my OLD MacBook Pro from my Time Capsule? and if so, will I lose anything
-
Get technical support of internet
NEED TECHNICAL SUPPORT
-
The movie could not be exported because an error occurred. (File already open with with write permis Never received this error until I updated to newer operating system.
-
How to view incompatible updates
The App Store tells me I have 6 incompatible updates, but I don't know what they are. How can I see them?