Can we push multiple application on TAB from Afaria Policy.
Hi,
Can we push multiple application on TAB from Afaria(cloud) Policy.
Hi,
Once one app is sent through afaria followed by multiple apps ... will all applications be accessible on the afaria market... And if yes till which time apps will be available on afaria market.
Similar Messages
-
How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?
How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
Or can I? Does anyone have a solution I don't realize exists?
Thanks,
SoweluAppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs"; take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example. An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching. -
Can i have multiple applications open on one page
can i have multiple applications open on one page?
JShimazaki wrote:
Mac OS X Mountain Lion supports multitasking like cbs20 mentioned. Just like MS Windows just press alt+tab to switch to whatever applications you have open.
Actually it isn't Alt-Tab on OS X, it's Command-Tab to use the Application Switcher.
Also, Control+ left/right arrow key will switch spaces if that's what's desired. -
How can we handle multiple applications in session method
how can we handle multiple applications in .. session method.
can any body reply me.
thanksHari,
hi Check out this sample code to use session method
REPORT ztest_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop
Don't forget to reward if useful.. -
Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful. -
How can I remove 'Open all in tabs' from my bookmarks?
How can I remove 'Open all in tabs' from my bookmarks? It's very annoying when you click on it by error. I downgraded from 29 to 28 because of the various bookmark issues I was having. I never had this issue with previous version of FF, why did they have to mess with stuff that was working.
I love the new layout. ThanksFirefox 28 contains security vulnerabilities. It's best to start a new thread (ask a new question) about the other issues you're having with Firefox 29 and resolve them.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
# Install Stylish and restart Firefox when prompted.
#* https://addons.mozilla.org/firefox/addon/stylish/
# Open the Add-ons Manager (Ctrl+Shift+A).
# Click User Styles on the left.
# Click the Write New Style button at the top. Paste the following in the text box, give the style a name, then click the Save button.
<pre><nowiki>
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#BMB_bookmarksPopup .openintabs-menuitem,
#bookmarksMenuPopup .openintabs-menuitem {
display: none !important;
</nowiki></pre>
If you don't want to install an add-on, you can use the ''userChrome.css'' file instead, but I don't recommend it.
* http://kb.mozillazine.org/UserChrome.css -
Hi there: how many times can I downloads a application I bought from you?
how many times can I download an application bought from you?
If you are asking about your personal Mac, and you want to delete FCPX and then reinstall it, then I agree with Tom, you can do it is many times as you want.
If, however, you are asking about other Macs that you own or control, then here is the language from the Apple End User License Agreement
http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library. -
How can I setup multiple home page tabs?
I am trying to setup mozilla like I have internet explorer. This is to say with multiple home page tabs on opening. Can I do this, if so how?
See:
* https://support.mozilla.com/kb/How+to+set+the+home+page -
How can I send multiple pics to email from my iPhone 5
How can I send multiple pics from photos app on I phone 5 to an e mail?
Open the album or event folder on your iPhone. Click the "arrow" icon in the upper right side of your screen.
Click the pictures you'd like to share via email (they will show a little checkmark when selected).
Click the "share button at the lower left corner of your screen...
Taa daa!
Bob -
I can't set up multiple images in tabbed panels in photoshop CC (do not have this problem in PS5 or 6). Has anyone had this problem with CC and if so do they know the fix?
I just discovered something really weird. If I open the images in
photoshop (and the tabs are not showing) and then open another window on
top of photoshop (for example word or safari) , then the images and tabs
show in the photoshop window. But if I move Pshop to the front screen then
the tabs disappear! -
I can't see all my open tabs from browser 1 in browser 2
I expected that one the first computer I leave my session, and after the sync on the second computer I will see the same state. I also expected that if I open 1 new and close 1 old tab on the second one, going back to the first computer I will see the changes there.
Instead what happens: I have around 800 tabs open in firefox on computer1.
After sync, on computer2 I can open a list called Tabs from other computers, this contains only 82 of the 800. I can't find the rest.
Also if I open one of this 82 and then close it, this does not sync back at all.When you have more than 10 tabs open a double arrow appears in the farthest right tab. It looks like this >>
Tab that double arrow to see a drop down menu of the remaining open tabs. You can select one from that menu. -
How can I transfer multiple songs at once from itunes to device
I was wondering how you can transfer multiple songs or files from itunes to a device, such as an ipod, at once. The past itunes let you do it and I've been trying the same methds that you use on the older versions but nothing is working. Anyone know how to do it?
If syncing, select the content desired to be synced and then sync.
If manually managing content select the content then drag and drop it. Multiple items can be selected by holding the Cntro key and clicking on multiple items. -
New Macbook pro with lion
Firefox 10.0Hi dcast01,
Are you saying that it restores your old tabs when you restart? Have you looked at ''Preferences > General'' to see if Firefox is set to restore your tabs from the last session? You should change it to ''When Firefox Starts: Show my home page''.
Or is your issue that you keep seeing the tab that says "welcome to firefox" when you start the browser? If that's the case, you should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. These should give you all the information you need!
If that doesn't work:
# Type about:config in the address bar
# Click ''I'll be careful, I promise'' if prompted
# In the Filter input field type ''startup''
# Double click on startup.homepage_override_url
# Delete the text string and click ''OK''
# Close Firefox and reopen the window to verify that it has worked.
Hopefully this helps! -
I am tempted to remove Ff4 and revert to 3.X if I cannot fix this problem. The question (statement) has all pertinent details already included
'''Hello peacefultrev,'''
I believe from your question you wish to remove the window title-bar, while keeping the menu bar available.
I have two solutions for you to try. One requires no plugin and the other requires the installation of a plugin.
'''No plugin option:'''
This option hides the the window title while also removing the menu bar. The menu bar can then be reactivated and viewed simply by pressing "Alt" which shows the menu bar until you click away from it. To do this:
# Right click on the tab bar and disable "Menu Bar".
# Whenever you which to use the menu bar, tap "Alt" on your keyboard.
# When you click away from the menu bar the windows title will disappear until you tap "Alt" again.
'''Plugin Option:'''
You can download this plugin called [https://addons.mozilla.org/en-US/firefox/addon/hide-caption-titlebar-plus-sma/ Hide Caption Titlebar Plus] which can be customized to suit your needs. I cannot provide support on this plugin as I have not used it myself.
I hope one of these solutions will suit your needs.
Mattlem -
How can I save multiple separate edited images from one original file?
I shoot NEF raw images and am getting used to the way LR5 editing works without altering the file in any way. Now I wonder how I can create multiple edited images this way.
Thank you, that was spot on. It will help a great deal right now as I am taking multiple crops from shots of the ocean looking for something striking.
I doesn't seem to matter if I take a copy while editing or before I start editing, I can always reset the original and start again.
Is it possible to rename the copy? I had a look around here and in LR Help but rename doesn't come together with virtual copy.
Maybe you are looking for
-
Sync strangeness after disk replacement and OS reinstall
This was posted in someone elses thread but I didn't want to hijack his thread so I started my own. I'm having a similar issue after a hard drive upgrade and OS reinstall. I added a 500G disk to my older g5 imac, which I sync my iphone to and ever si
-
Image Scan! (iscan) takes a long time to start
I recently setup an Epson Premium XP-620 on my network (static IP). I am able to scan with it using the epkowa driver - however when I start iscan it takes over 10 minutes to bring up the GUI, which then allows me to continue scanning. I read in the
-
Hi, I am working on JMS with WSAD 5.1. when I am try to call the "createProducer" method like below Session mySess = queueConn.createQueueSession(false, Session.AUTO_ACKNOWLEDGE); MessageProducer myMsgProducer = mySess.createProducer(queue); it gives
-
Add time series and CIF behaviour
All, I need to delete time series and add time series again. What is the impact in a production environment? Do I need to stop CIF etc? Cheers
-
My iPod 5th generation won't turn on and my middle button doesn't work
My ipod 5th generation won't turn on and my middle button doesn't work! What will I do? It all starmed when I updated iOS 8. It would be fine but would shut down at random, now it won't turn on at all!!! when I press the lock button to turn it on the