Can we record a video from a web cam and let saved video take our previous setting

Can we record a video from a web cam and let saved video take
our previous setting
fps: 20
bitrate: 1000
Size: 500*400
can we configure that in code or is it a webcam specs?

Hi, Vikas-
After a brief bit of research, you're definitely hitting upon the limitation of the browsers. Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
Thanks,
-Elaine

Similar Messages

Can you please record a video from a web cam with inital setting

Can you please record a video from a web cam that has the
following specs
fps: 20
bitrate: 1000
Size: 500*400
can we configure that in code or is it a webcam specs?

QuickTime Player Pro can't record the screen.
QuickTime X can record the screen (but only all of it and not just a window). It's a part of Snow Leopard.

Can't see any video from Apple Web Site and some others, MacBook Air 13"

i need help, i cant see the videos on the apple website and some others. I can hear the sound of the video but the video seems all black nd i cant see it. I was watching some other videos that needed a program called DivX, i first thought it was because of that but then i unistalled it but it still doesnt work. Hope anyone can help me
Thank you

I had the same problem... very simple to solve...
With Safari open, click "SAFARI" on the top bar, scroll down and click "PREFERENCES"...
With Preferences open, mouse over to "EXTENSIONS" and click to move the slider to turn off extensions created by third-party developers...
That's all I did and when I tried to open the videos on Apple's site everything worked normally again...
Hope that helps!

How to display video from UDP web camera

hi
Im interfacing to a Sony IPELA video camera that has a built in http web server. i can send individual HTTP commands to authenticate, to retrieve still jpeg images from the camera and to control tilt pan zoom. but when i initiate video, there is nothing, the bits fall onto the floor.
As a result of searching it seems that software related to web cam applications is needed. I thought how about Labview? is there a way to make an object that will consume an RTP video stream? it can be H.264 or mjpeg or mpeg4
thanks so much

hi
Sony has some boilderplate/example code that runs in visual studio, your Sony rep for this camera should be able to send you the latest. i might be able to find the older stuff but its old
you setup the solution file in VS and it lets you get video and set parameters from your program. i suppose that a connection between labview and this could be made such that the .vi controls the Win32 directly, so it doesnt have to know about the Sony camera it just interfaces to the .dll but how to get the stream object and the video in the .vi ? would take time to figure out
also what we did was go with http://www.intuvisiontech.com/products/panoptes.php and now that i think about it, there is a free video software app to get the stream data but they mention it in their website, the icon has a picture of a cone? like construction zone warning cone
anyway these folks are very helpful
hth

How can I copy a table from a web file and paste it into a word document on a pc?

I am having diffculty getting a pdf file from a web document pasted into my word document. I do no get the option to copy or save as a table. I can copy and paste the text but I lose the table and the format and just get the text. Anybody know what I can do to solve this?

Try holding down the alt key as you mark the text to be copied. You can then copy columns to table text.

Streaming video using a web camera is choppy

Hello,
I have an swf program built with flex which displays video from a web camera. The problem is that the the video is being displayed a bit choppy. You can see an example at https://www.completelyonlinetestserver.com/Flex/videobox.html. Try holding a piece of paper with writing in front of the camera and you will see that the writing is very choppy.
What can I do to make the video clearer? Any help would be very appreciated.
Thanks
Armen

Hmmm...I dont have the drivers installed on my computer for my web cam to work, but when I compile that example do get the trace output, "You need a camera.". So that part works. Below is the code ported into an MXML file.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="absolute"
                applicationComplete="CameraExample();">
     <mx:Script>
          <![CDATA[
          private var video:Video;
        public function CameraExample()
            stage.scaleMode = StageScaleMode.NO_SCALE;
            stage.align      = StageAlign.TOP_LEFT;
            var camera:Camera = Camera.getCamera();
            if (camera != null)
                camera.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
                video = new Video(camera.width * 2, camera.height * 2);
                video.attachCamera(camera);
                addChild(video);
            else
                trace("You need a camera.");
        private function activityHandler(event:ActivityEvent):void {
            trace("activityHandler: " + event);
          ]]>
     </mx:Script>
</mx:Application>

Downloading Video from a digital camera

I am trying to download a video from a digital camera, and iPhoto is not allowing it to, with no reason given. Does anyone know of an upgrade or a program where i can download the video?
Thanks

Welcome to macbook forum
You should use iMovie instead of iPhoto.
And if you only have usb port and no firewire port in your camera, you must use iMovie 7 from iLife '08 that allowed tapeless camera / camcorder video file imported to your mac.
You can also browse the camera storage media and drag the video file to your HD or desktop using the camera usb connection (it should pop up as white drive at desktop) or using usb card reader.
Good Luck.

Receive image from two web-cameras

Hallo all.
I have LV 7.1.1
I have two web-cameras which are connected to USB1 & USB2.
How can I see two images from two web-cameras or more in LV at the same time?
With respect
Aleksandr
Message Edited by [email protected] on 06-19-2006 01:20 AM

Aleksandr,
The IMAQ for USB driver communicates to the 3rd party camera driver using Directshow. There is an IMAQ USB Property Page VI available in LabVIEW that gives you the ability to open the camera configuration page of the 3rd party camera provided that there is one available. Depending on the vendor, you may or may not have access to change the resolution of your camera through this property page. I would contact the manufacturer of the camera to find out if there is a way to do this.
In case you are curious to know where to find the IMAQ USB Property Page VI, right-click on the block diagram and go to Search in the upper right corner of the palette. Search for "IMAQ USB Property Page" and the corresponding VI will show up in the list below it.
Regards,
Mike T
National Instruments

Can't stream video from the web

My iPad cannot stream videos from Safari web sites except when I am in the same room as the modem and router. I am not talking about flash, I mean videos it should be able to stream.
I use an Arris modem from Comcast with a Time Machine in the same room. I have an Airport Express in another room to extend wireless coverage.
If I start a video in the "time machine room" it will load and I can then leave and the video will play. If I try to start it in another room it will not load properly.
I tried a test, streaming the same video to my iBook, my iPhone and my iPad - from a non "time machine room" in my house. No problem with the iBook or iPhone. The video played with no problems. No go with the iPad.
Does anyone have any ideas why this is happening? I am getting a strong Wi Fi signal.
Deanna

HI Deanna,
Try resetting the network settings on your iPad.
Tap Settings / General / Reset / Reset Network Settings.
That will restore to factory default.
Restart your iPad, restart your Mac.
If that doesn't help, try changing the Airport channel.
Select the device you’re setting up on the left and then click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose a new channel from the Channel pop-up menu.
If that doesn't help, go to /Library/Preferences. Move all the files in the System Configuration folder to the Trash, and restart your Mac.
Try streaming again.
If I try to start it in another room it will not load properly.
Also, check out the Airport Express online manual *page 41* for: *Items that can cause interference*
http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf
Carolyn

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

-->Click HERE<-- Does item "B" (Turn video on/off) in the last topic on the page help?
You control the camera for Skype from within Skype, so Skype must be running to running to make video work.
Message was edited by: EZ Jim
Mac OSX 10.7.4

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing?

Why can I not print anything from a web page?

Why can I not print anything from a web page?

Thank you, but I still haven't solved my problem. I tried the reset suggestion. But I cannot find print.print_printer preference. Maybe the word "printer" is to be replaced with the name of my printer. But because of the warning that making any changes is a very dangerous thing to do, I hesitated to do anything.
I have located the Print to file option, but it is not checked.
This problem did not exist before the Firefox update of about 6 months ago. Today I downloaded the latest Firefox update, hoping that would solve my problem, but it did not.
Thank you for your continued assistance.

Can the recording you make from the Dictaphone App be transcribed directly to your ipad?

can the recording you make from the Dictaphone App be transcribed directly to your ipad?

No it appears to simply be an audio recorder from the description in the App store.
You could try out Dragon Dictation as it scribes as you record.

Can i stream video from an hd camera to an ipad?

can i stream video from an hd camera to an ipad?

It would depend on the camera, and the software, there are items like airparrot, drone camera, or video surveilance cameras that have ipad apps for viewing. A great deal more research is in store I'm afraid.
Google the following for an example
can you connect a go pro to an ipad and capture the video

Why i can't import videos from my Sony cam with iMovie on ipad 2?

Why i can't import videos from my Sony cam (HDR-XR500) with iMovie on ipad 2?
With my iMac i can import videos in iMovie but with iMovie iPad 2 we can't do this...very bad..it's a minimum to can import video from cam!!
Bye.

Same with my Canon A 620 Ppwershot! :-((((
I want to create short diving movies on holidays with iMovie-editing and sent them to friends.
It does not work.
But that was one of the main reasons buying iPad and iMovie :-(((((

Can we record a video from a web cam and let saved video take our previous setting

Similar Messages

Maybe you are looking for