Can we rename the clustered instance and change its IP address?

Hi,
We have an Sql Server 2008R2 Clustered production instance by name 'ProdVir' configured in 2 nodes(Active-passive) with
WIndows Server 2008 R2. We also have another clustered instance as disaster recovery by name 'VirDr' configured again
in another 2 nodes of Windows Server 2008 R2. Every day morning there is mainatenace plan which backups all the database
in production and another maintenace plan in the disaster recovery server 'VirDr' which restores the backups into the
VirDr instance. I would like to know that in an eventuality of a disaster in the clustered production instance of 'ProdVir'
could we rename the the instance VirDr(meant for disaster recovery) to ProdVir and also change the Ip addresses accordingly
so that the application programs do not have to change the details for the datasource in the connection strings.
Thanking you in advance,
Binny Mathew

Binny - Yes this is quite achievable, higher level steps (You also need to consider other operational checks):
In the cluster administrator landing page, select your SQL Server Network Name, Press f2 or right click and select rename, give it a new name and then
Take resource OFFLINE and then
Bring it ONLINE back again, test your application
Changing IP Address:
Add one more Network resource with the new IP Address
Then you add this IP address to the SQL Server group and set dependency accordingly
Take SQL Server Application OFFLINE and ONLINE again
Here you will end-up with 2 IP Addresses, you can keep both of them or remove the old one later
Good Luck! Please Mark This As Answer if it solved your issue. Please Vote This As Helpful if it helps to solve your issue

Similar Messages

Can you update an iOs app and change its platform offering from iPad/iPhone to just iPad?

When building a new app with Adobe DPS to update an existing app, can you update an iOs app and change its platform offering from iPad/iPhone to just iPad?

Vinod is correct in that you can build a new app that's iPad-only, but if you try to submit it as an update to the existing app, Neil is correct--Apple will reject it because it's considered a downgrade. You either need to stick to the universal app and do something like create a single iPhone folio that refers users to the iPad, or you need to submit it as a new app.

Only blank tiles are showing so i can't view the photo, click and hey its there

I have reloaded the software many times done everything possible. It is only recent photos everything before Jan shows.

What "software"? What system? You need to provide a lot more details.
Mylenium

Problem accessing child object and changing its appearance (color)

For a program, I need to be able to access a child object (in this case a box) after adding it to a transform group and change its appearance, for example the color of its top face. I have included a small code example to show my problem. The box is the only child I have added to the TransformGroup, but when I call getChild(), it returns a node, and thus I can't then call getShape() to get the top face and change its appearance. What am I doing wrong?
public BranchGroup createSceneGraph() {
     BranchGroup objRoot = new BranchGroup();
     Transform3D rotate = new Transform3D();
     Transform3D tempRotate = new Transform3D();
rotate.rotX(Math.PI/4.0d);
     tempRotate.rotY(Math.PI/4.0d);
rotate.mul(tempRotate);
     TransformGroup objRotate = new TransformGroup(rotate);
     objRoot.addChild(objRotate);
     Appearance ap = new Appearance();
     Appearance app = new Appearance();
     Appearance apr = new Appearance();
     ColoringAttributes colr = new ColoringAttributes();
     ColoringAttributes colg = new ColoringAttributes();
     colr.setColor((float)1, (float)0, (float)0);
     ap.setColoringAttributes(colr);
colg.setColor((float)0,(float)1, 0);
     apr.setColoringAttributes(colg);
     Box box = new Box((float)0.4, (float)0.4, (float)0.4, app);
     box.getShape(4).setAppearance(ap);
     objRotate.addChild(box);
     objRotate.getChild(0).getShape(4).setAppearance(ap);
objRoot.compile();
     return objRoot;
}

It would help if you gave us the following System information:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) capacity
Make and model number of video card
Also try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

My iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.

my iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.
What's the answer?
Thanks

Many thanks to responded to my question and sorry not to get back sooner.
Yes, I discovered by this unfortunate experience that the names of photos are a serious issue if the site is to ever go to an FTP server. Apple should discuss this carefully in their "manual".
One more question: I uploaded the website to a folder on my desktop. When I open it, unlike the photos in iWeb, there are folders for each page which have all the photos in them. I went through each folder and changed the names to be FTP compatible. I'm using iWeb SEO Tool which allows one to upload from this local folder to an FTP server but having trouble.
Is this because there is an imbedment in iWeb that uses the old photo names to link to the actual photos and it can't find them because of the name changes?
Thanks again for your help ...
Phil McP

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Hello Guys. I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD? Please Help. Thank You

Hello Guys.
I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
Please Help.
Thank You
Julio Skov

Hey
Thank you very much for replay.
Would you explain to me how can I do?
I don't really understand these processes.
Thak you very much
Julio

I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

Hi rgarden95,
Can you please confirm the exact version of Muse you are opening the file with?
To check the version of Muse, please click on help->About Adobe Muse CC.
Regards,
Akshay

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
Any help would be appreciated
BTW
Ive tried all the system sound prefs, and garage band drivers. Back and forth.
cheers
ds

I have an ipod 2g and my lock button wasn't working so i took the ipod apart and changed the button. the top half works but the bottom doesn't so i cant unlock my ipod but i can still listen to music and such

i have an ipod 2g and my lock button wasn't working so i took the ipod apart and changed the button. the top half works but the bottom doesn't so i cant unlock my ipod but i can still listen to music and such

Take it apart again and find out and fix what you messed up.
First I would try restoring the iPod. to factory settings/new iPod

After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

How to Rename the technical name and description of an infocube?

Hi,
How to Rename the technical name and description of an infocube?
Thanx in advance,
Ravi.

Ravi,
You cant change the Technical name of the cube but you can change the description of the Cube. If you want to have a Cube with the same properties and with different Techname and Description better you do copy from the base cube and rename as per your requirement.
Regards,
Gattu.

In which folder can I find the abap instance profile?

Hi,
In which folder can I find the abap instance profile?
This is the parameter that I want to change:
"profile parameter em/address_space_MB = 250 in the instance profile"
Greets
Stefan

Hi Michal,
my actual problom is, that during the Java-Add-In-Installation an error appears. (CJS-20057)
j2ee-engine (dvebmgs00) do not start during this installation.
I also change the value of max. heap size and try a rebase as it is shown in note 129813.
nothing chances.
this error appears all the time.
can anybody help me please?
Thanks.
Greets
Stefan

How can I rename the title of an ibook?

Ibook is a nice app. unfortunately i cannot rename the titels of pdf files, which are listed in my ibook. How does that work ?
Thank for the help.

You cannot rename the PDF files in the iBooks app on the iPad. In theory, this should work (copied from another discussion)
If the PDFs appear in iTunes (they would be in the Books section of the iTunes Library) then you can change the title by selecting each PDF, File->Get Info from the main menu and change the Name in the Info tab. Then sync the newly titled PDFs back to the iPad.
If that does not work, you could copy the PDF files to your hard drive, rename them on the computer - but not within iTunes, drag them back into your iTunes library, and then sync again.
I really don't know of a shorter or more direct way of renaming the files. You may be able to rename PDF files in apps that let you edit or annotate PDF files, but I don't have any of those apps, so I can't speak with any certainty about it.

Can we rename the clustered instance and change its IP address?

Similar Messages

Maybe you are looking for