Can we set the scroll speed to an anchor???

can we configure the scroll speed to an anchor when pussing an hiperlink button, that is now going 1000ms by default???

It's not possible straight out of the box. There's a widget you can buy to do it, though.
Smoothner by QooQee.com

Similar Messages

How do I set the Shutter Speed in Manual Mode on my EOS 70D

I recently was forced to upgrade to a Canon 70D after my 50D died from a fall. I am not happy with the ease of setting the Shutter speed while in Manual mode. The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen. The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D). I can control the Aperture with the quick control dial. The Function Lock button is off.
I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual. I would greatly appreciate it if someone could help me with this issue.
Thanks
Gene

Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
http://www.dpreview.com/forums/thread/2638326

PDF/X makes the scrolling speed of ClearScan PDFs much faster

Hello all,
I am using 9 and X (trial) to find the best solution for reading scanned documents on Mac and iPad. I recently found that ClearScan OCR makes scanned black and white PDFs very light. Consequently, scrolling of PDFs on Mac and iPad becomes faster than regular bitmap PDFs.
However, there is a problem in ClearScan that bitmap image area become heavier than the original scanned files. I usually scan paper documents with a resolution of 600 dpi and downsample them to 600 dpi when OCRing. So theoretically, scrolling and pinch zoom in/out speed in Preview.app should be the same between the original documents and OCRed ones. You will be able to reproduce this problem if you OCR the following PDF. Try ClearScan + 600 dpi downsample + US English.
http://articles.adsabs.harvard.edu/cgi-bin/nph-iarticle_query?db_key=AST&bibcode=1990ARA%2 6A..28..215D&letter=0&classic=YES&defaultprint=YES&whole_paper=YES&page=215&epage=215&send =Send+PDF&filetype=.pdf
But if I export OCRed document as PDF/X after saving it as a regular PDF, the bitmap area become very light and scrolling speed in Preview.app becomes very fast, while I get a preflight error when exporting to PDF/X. The file size of the exported document becomes about two times larger than the regular ClearScan PDF.
My question is; What is the main difference between regular PDFs and PDF/X? How can I get the same effect of the scrolling speed difference without exporting regular PDFs to PDF/X which is heavier? Any technique?

Hello lrosenth,
Thank you for your comment. As you mentioned, I do not need to use PDF/X in fact because I do not send them to DTP companies.
Is there any tips to change the scrolling speed faster without using PDF/X? I do not know why the image part of regular PDFs after ClearScan is heavier than the originals.

Control the scrolling speed while browsing a PDF file from a URL in Safari

When I open a URL pointing to a PDF file from Safari, the PDF file is opened by the AdobePDFViewerNPAPI.plugin. Too many times the multi-page PDFs scroll too fast up and down uncontrollably from the touch Pad.
Is there a way to control the scrolling speed and make my reading experience better?

You need to remove both, while Safari is closed.
You can use the Trash - Put Back command to replace them right away (again, close Safari first) or drag them from the trash to some spare folder, in case you want them later.

How can I hide the scroll bar in TextArea?

How can I hide the scroll bar in TextArea?

Hi. To remove the horizontal scrollbar you can do this:
textArea.setWrapText(true);
To remove the vertical scrollbar you can do this:
ScrollBar scrollBarv = (ScrollBar)ta.lookup(".scroll-bar:vertical");
scrollBarv.setDisable(true); and set the opacity to 0 in the css file:
//css file
.text-area .scroll-bar:vertical:disabled {
    -fx-opacity: 0;
}Here is an example:
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ContextMenu;
import javafx.scene.control.MenuItem;
import javafx.scene.control.ScrollBar;
import javafx.scene.control.TextArea;
import javafx.scene.input.ContextMenuEvent;
import javafx.scene.layout.StackPane;
import javafx.stage.Stage;
public class TextAreaSample extends Application {
    @Override
    public void start(Stage primaryStage) {
    final TextArea textArea = new TextArea();
        textArea.setWrapText(true);
        StackPane root = new StackPane();
        root.getChildren().add(textArea);
        Scene scene = new Scene(root, 300, 250);
        primaryStage.setScene(scene);
        primaryStage.show();
        scene.getStylesheets().add(getClass().getResource("style.css").toExternalForm());
        ScrollBar scrollBarv = (ScrollBar)textArea.lookup(".scroll-bar:vertical");
        scrollBarv.setDisable(true);
    public static void main(String[] args) {
        launch(args);
}

How can I set the United States as my country when opening PSE 10?

How can I set the United States as my country when opening PSE 10 so I don't have to scroll down every time?

Why do you have to scroll down every time? You should only see the country window the very first time you launch PSE after installing it.

How can I get the scroll bar to go to the top or bottom of the page with a right click command?

When I right click on the scroll bar nothing happens. I have to spin the mouse wheel repeatedly to get to the top or bottom of the page. I just switched from explorer. I'm used to being able to do this. It's much less time consuming and frustrating. I hope someone can help. Thanks.

You can hold down the Shift key and left-click the scroll bar to go to that position.
If you set the Boolean pref middlemouse.scrollbarPosition to "true" (default on Linux) on the about:config page then you can middle-click the scroll bar to go to that position.
*http://kb.mozillazine.org/middlemouse.scrollbarPosition
*http://kb.mozillazine.org/ui.scrollToClick

Can i set the ipad to print to an Hp all in one that is connected to Airport express

Can i set the Ipad to print to an HP All-in-one Printer that is connected to airport express?

Hey Eugene!
Here is the website about AirPrint, if you scroll down it will say in details if your model is compatible with AirPrint.
http://www.apple.com/ipad/features/airprint.html

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

Hey Chunrok,
I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
I hope this helps!
Sarah Miracle
National Instruments
Attachments:
Example.vi ‏281 KB

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

First, I couldn't seem to find that example either on computer or on the NI sites.
The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
We're still working on a simpler way to get accurate time.
Rob

In iPhoto I can't stop the scrolling

How can I stop a fast scroll through iphoto?

What sort of device are you using to scroll: mouse, trackpad? Go to the mouse or trackpad System preference pane and change the scrolling speed to suite you needs.
OT

How do I set the scroll position to the bottom of window

Hi!
I have some text that is printed out to a JTextArea, which in turn is placed in a JScrollPane and the text output works fine.
However, as each line is "appended" to the JTextArea the scroll bar stays at the top meaning the text "disappears" at the bottom of the screen.
I would like to set the scroll bar at the bottom of the scrollpane after each append, but can't for the life of me figure out how. I've done it before o.o, any help would be greatly appreciated.
Thank you,
/SweDev

Something like:
textArea.setCaretPosition(textArea.getDocument().getLength());

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

Can we set the scroll speed to an anchor???

Similar Messages

Maybe you are looking for