Can we start DB with srvctl start DB?

I can't access sqlplus can i start db with this command in 9i?
srvctl start db

Hello,
Probably your PATH is not set correct provided your sqlplus utility is functioning.
Set your environment either in .profile or .bash_profile in $HOME directory (Solaris / UNIX flavor)
export ORACLE_SID=orcl
export ORACLE_HOME=/u01/oracle/product/XXXX
export ORACLE_BIN=$ORACLE_HOME/bin
export PATH=$PATH:$ORACLE_BIN
now you try to run sqlplus at command line. It should work. Please customize the environment varibles for your own environment.
Let me know if this works. Hope this helps.
- Leo

Similar Messages

  • Can not start the cluster database using srvctl

    Created a RAC database with CRS.
    When i start the cluster database with srvctl, it appears that the database is started (i made sure using srvctl status), but when i try to login to the database using sqlplus, i get a message 'connected to idle instance'. if i try to start the database from sqlplus, i get message 'requested INSTANCE_NUMBER is busy!.
    any thoughts why i can not connect to the database using sqlplus after i start the database using srvctl?
    I stop the database using srvctl and started using traditional sqlplus, it will start with out any problem.
    what am i missing?

    check ur oracle_sid,also try to connect as sqlplus sys/****@prod as sysdba
    may be this is due to improper setting of init.ora file.
    and post ur sqlplus output here.
    Thanks
    Kuljeet Pal Singh

  • Cound not start Database with SRVCTL

    Hi,
    We have 2 node Oracle RAC 10g on linux .But the problem is we can only start the database with SRVCTL command.The statistics of crs are given bellow
    crs_stat -t -v
    Name Type R/RA F/FT Target State Host
    ora.mitc.db application 0/1 0/1 ONLINE OFFLINE
    ora....c1.inst application 0/5 0/0 ONLINE OFFLINE
    ora....c2.inst application 0/5 0/0 ONLINE OFFLINE
    ora....UB.lsnr application 0/5 0/0 ONLINE ONLINE rac1pub
    ora....pub.gsd application 0/5 0/0 ONLINE ONLINE rac1pub
    ora....pub.ons application 0/3 0/0 ONLINE ONLINE rac1pub
    ora....pub.vip application 0/0 0/0 ONLINE ONLINE rac1pub
    ora....UB.lsnr application 0/5 0/0 ONLINE ONLINE rac2pub
    ora....pub.gsd application 0/5 0/0 ONLINE ONLINE rac2pub
    ora....pub.ons application 0/3 0/0 ONLINE ONLINE rac2pub
    ora....pub.vip application 0/0 0/0 ONLINE ONLINE rac2pub
    and when we start the database we got the following error
    [oracle@rac1pub ~]$ srvctl start database -d mitc
    PRKP-1001 : Error starting instance mitc1 on node rac1pub
    CRS-0215: Could not start resource 'ora.mitc.mitc1.inst'.
    PRKP-1001 : Error starting instance mitc2 on node rac2pub
    CRS-0215: Could not start resource 'ora.mitc.mitc2.inst'.
    Please,help in this matter.

    Thanx for your reply
    The log file of CRSD has the following entries
    2011-04-20 14:07:21.831: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:08:22.184: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:09:22.534: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:10:22.887: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:11:23.240: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:12:25.666: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:12:26.801: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:12:26.903: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [146043288] retval lht [-27] Signal CV.
    2011-04-20 14:14:24.275: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:15:24.627: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:15:38.383: [  CRSRES][3739253664]0startRunnable: setting CLI values
    2011-04-20 14:15:38.404: [  CRSEVT][3739253664]0CAAMonitorHandler :: 0:Action Script for resource 'ora.mitc.mitc1.inst' stdout redirection failed for `/oracle/product/10.2.0/crs/crs/log/startRqwsEA.stdout` : No such file or directory
    2011-04-20 14:15:39.747: [  CRSAPP][3739253664]0StartResource error for ora.mitc.mitc1.inst error code = 1
    2011-04-20 14:16:24.989: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:17:25.346: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:18:25.688: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:19:02.007: [  CRSRES][3739253664]0startRunnable: setting CLI values
    2011-04-20 14:19:02.037: [  CRSEVT][3739253664]0CAAMonitorHandler :: 0:Action Script for resource 'ora.mitc.mitc1.inst' stdout redirection failed for `/oracle/product/10.2.0/crs/crs/log/startufHsG5.stdout` : No such file or directory
    2011-04-20 14:19:03.372: [  CRSAPP][3739253664]0StartResource error for ora.mitc.mitc1.inst error code = 1
    2011-04-20 14:19:26.034: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:20:26.386: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145591424] retval lht [-27] Signal CV.
    2011-04-20 14:20:52.294: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:20:52.517: [  OCRUTL][3931159456]u_freem: mem passed is null
    2011-04-20 14:20:52.961: [  CRSRES][3771255712]0Attempting to start `ora.mitc.mitc2.inst` on member `rac2pub`
    2011-04-20 14:20:52.989: [  CRSRES][3781745568]0startRunnable: setting CLI values
    2011-04-20 14:20:53.004: [  CRSRES][3781745568]0Attempting to start `ora.mitc.mitc1.inst` on member `rac1pub`
    2011-04-20 14:20:55.049: [  CRSAPP][3781745568]0StartResource error for ora.mitc.mitc1.inst error code = 1
    2011-04-20 14:20:55.236: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145997144] retval lht [-27] Signal CV.
    2011-04-20 14:20:55.929: [  CRSRES][3771255712]0Start of `ora.mitc.mitc2.inst` on member `rac2pub` failed.
    2011-04-20 14:20:56.628: [  CRSRES][3781745568]0Start of `ora.mitc.mitc1.inst` on member `rac1pub` failed.
    2011-04-20 14:21:26.746: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:22:25.372: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [146011440] retval lht [-27] Signal CV.
    2011-04-20 14:22:26.026: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:22:27.151: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:23:27.451: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:24:27.804: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [146011440] retval lht [-27] Signal CV.
    There is not any error found in alter log file of database.

  • How can I start anew with Photos and clear the (minimal) stuff it has uploaded

    I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
    more than I have-and of course it got stuck there, like it has for the last week.
    I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So  i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    <Re-Titled By Host>

    How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    It is hard to say from your post, why the migration did not succeed in your case.
    by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang?  Or did already the upgrade to the Photo Library fail?
    If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
    Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
    To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions.  (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
    If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
    Can you launch Photos at all?  If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

  • I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

    I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

    Hello,
    That means it can find the Hard Drive, or can't find the things needed for booting.
    See if DU even sees it.
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Can not start up with internal HD after 10.9.4 update

    After installing 10.9.4 update, can no longer startup from internal HD on late 2012 iMac, 2.9 ghz, 8 gb ram, 1 TB internal
    Used Disk Utility to starup from external 10.9.3 drive and that works fine.
    Loaded the manual 10.9.4 update onto external, and tried updating the 10.9.4 internal. No luck.
    Attempting internal startup with 10.9.4 results in black screen, followed by several seconds of lit screen and spinning icon, then back to black screen.
    After starting up on 10.9.3 external, 10.9.4 internal shows mounted, files appear fine, and can copy back and forth. Just can't start with that drive, and can't risk updating external 10.9.3 to 10.9.4 until I find out and fix the problem.
    Thank you

    This was reported by another user:
    I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
    1. Shut the computer down by holding the power button for 10 seconds
    2. Restart the computer and press shift at the same time until you see the progress bar start moving
    3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
    4. After a moment, you should see the spinning beach ball
    5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
    Apparently it's an issue with an automatic update that never quite got past the login screen.
    If the above doesn't help, then move on to these:
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

  • I can start a conversation with my number on imessage but i can't be reached with my number. How can I fix this?

    I can start a conversation with my number on imessage but i can't be reached with my number. How can I fix this?

    Go to Settings>Messages>Send & Receive, and make sure that your phone number is checked. If it is not, then scroll to the top of that same screen, click on your Apple ID, and sign out of Messages, and then back in again.
    Cheers,
    GB

  • Libre office can not start in arch with lxde (clucene was installed)

    installed Arch on Asus Eee Pc 900 (very old, cpu - 900 MHz, ram 1 G)
    then installed lxde and libre office.
    the problem is that Libre Office can not start and show the message with
    a language I don't understand. It say that:
    LibreOffice 4.0-Fatal Error
    Die toepassing kan nie laat loop word nie.
    'n interne fout het voorgekom.
    so I google and read some post.
    I fount that I may need clucene installed.
    that's why, I installed clucene.
    but problem is still exit.
    any solution, please!
    Last edited by mshan (2013-05-05 13:54:53)

    It doesn't fix the main problem, but read the note and install English langpack https://wiki.archlinux.org/index.php/Li … stallation
    The error message isn't very helpful, it says
    The application can not run.
    An internal error occurred.
    Last edited by karol (2013-05-05 14:17:56)

  • Have just migrated from the world of PC's. and I had my set up so that when I typed a new sentence it started with a capital with out me pressing shift. also, i could set up words to self fill like ur would auto correct to your. can this be done with mac

    Have just migrated from the world of PC's. and I had my mail text typing set up so that when I started  a new sentence after a full stop  it started with a capital with out me pressing shift. also, i could set up words to self fill like ur would auto correct to your. can this be done with mac

    I don't know about the first letter cap but the spelling is simple. Edit - Spelling and Grammar - Select While Typing and Correct Spelling Automatically.
    I'd also STRONGLY recommend that you bookmark and use:
    Mac 101
    Switch 101
    Find Out How Video tutorials
    List of Useful URLs for switchers
    Welcome to the Light side.

  • Page numbering- How can I start with a specific Page #?

    I'm using Pages 09 (snow leopard, and Pages on my iPad IOS 4.3.5) and I'm trying to get pages to start numbering using specific numbers.  For example lets say I'm editing chapter 3 of a book which starts on page 84.  Chapter 3 is its own document and always starts numbering with page 1.  I know I could make one large document by pasting all the chapters into a single doc, but I hate working on such large documents.  Editing single chapters at a time is easier to navigate.
    Is there anyway to get the page numbering to do this?  I've tried all the options in the page set up and nothing seems to work.  Pages always start with 1 at the begining of a document.
    Thanks in advance for any help!
    Cheers!
    David

    In Pages on your Mac you used the inspectors for most functions. You can change starting page numbers in the section tab of the layout inspector.

  • HT1414 Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

    I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    What "everything" have you tried?
    What exact version number (down to the last decimal) is your AE?
    What OS are you using?
    What are your other system specs?
    When did it work last? What happened between then and now?
    FAQ: What information should I provide?

  • I ran an iTunes update.  It failed with the message  System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem.   I tried reinstalling but get the same message.

    I ran an iTunes update.  It failed with the message  "System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem."   I tried reinstalling but get the same message.  I looked in my Recycle Bin for that file name but there is none there.  Is this a new file that iTunes wants?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • Help! Macbook can't start up and a folder with a symbol "?" in it.

    my english is not good
    i hope u can understand what i said about the situation
    about 4 days ago,i opened a psd file in may mac,but my mac worked very hard at that moment.and the cursor turned like a coloful circle
    then i shut down the power
    after couple of hours i opened the computer again,but terrible thing happened
    it could't start up,just a blank screen, a folder with a symbol "?" in it.
    someone told me maybe there was something wrong with the hard drive
    so i put the system disk 1 into the computer and use the Disk Utility but it can not find my hard drive!!
    Disk Utility show that only a cd,no hard drive
    what happened with my mac? can anybody help me?
    Message was edited by: noirz

    thx ^_^
    i bought my mac in september last year so i still can get some care with my mac from apple inc.
    $1600 is too expensive and it's not my mistake about the situation.
    i found many people have this problem: computer doesn't work -> shut down the power -> can't restart ->hard drive crashed
    so, don't u think the hard drive is too weakness? i've never got any problem like this when i use other computers
    sigh... the most important thing is send my computer to the service
    T_T ...pictures...movies...music...memory...etc..

Maybe you are looking for

  • Master table detail table with SQL based read only VO with bind variables

    i have a page where i am displaying data as master table and detail table. both table VOs are based on SQL queries which use bind variables. i have a view link between vos of type 1:M i created master table detail table page by dropping detail iterat

  • Play Count no longer updated from Ipod

    After I updated the software on my Ipod, it no longer updates plays to the play count tally on Itunes when I update the Ipod. Formerly it did this automatically. Now only songs played on my computer go towards the play count tally. What gives? HP Pav

  • Migrating a test site to an existing BC site

    I am trying to migrate a site creating as a trial using a BC GURUS template to an existing e-commerce site hosted by BC. Is there any easy way to do this without having to recreate modules, web forms, etc - basically all the work I did with the trial

  • 6500A Plus print jobs sit in tray, and do not print for extended periods

    Printer is connected to two computers wireless and has been working fine. Recently began just sitting there after you click on print. Icon comes up in tray, but printer does not start print job. Often get pop-up message that says print job failed, af

  • How to invoke the mdb  without jms client

    Hi, I have a requirment in that I want to invoke the message driven bean without jms client. ejb 2.1 support this but I don't know how. if any one have an idea pl reply this. thanks