Can we use If condition in so10?

Hi Experts,
I want to have different text descriptions for different release code in PR workflow
can I dynamically change the task description keepin the task as same .
can we put if condition in task description ?
Thanks & Regards
Dharmesh Sharma

Use this syntax in Task Description it will work. If you are using Include Text and maintaining the condition in include text bring that text to Task Description.
Syntax:
/: IF &BUS2015.RelCode; = 'HD'
Head of Department
/: ENDIF
/: IF &BUS2015.RelCode; = 'DR'
Director
/: ENDIF
Regards,
Ramu N.

Similar Messages

Can we use 2 Conditions as Selection Variables in a Query?

Hi Gurus,
According to the requirement in our report , we need to have selection variables on 2 Key figures Target Quantity and Consumption.
So ,we have used Conditions to have Variables in the Selection screen.
The Conditions (the Selection screen variables) are not working properly.
Can you please give some pointers on the Conditions to be used in the reports.
Thanks,
Sravani

I did not understand whats the issue is...., is it with the condition? or the variable.
If with the Condition please provide some more details about the condition.
If it is a variable, as the other person said, how did you create the variable on the Keyfigure? because as per i know we cannot create any variable for the Keyfigure, but if is possible please let me know, and i can dig in to that, and let you know how to fix the issue.
Regards,
Ram
Edited by: Ram Pawan on Aug 14, 2008 4:06 PM

Can you create nested condition in merge(e.g. insert/update) using owb

Hi,
Does OWB9iR2 allow you to build in nested condition in merge. such as
If no match on col1 and col2 then
if col3 match then no new sequence insert <---
else insert new sequence;
else (there is match on col1 and col2)
update col3 and sequence.
I have an incremental load for a lookup table, where insert/update is used. There are two match columns and surrogate key is used. When there is no match, it shall not insert a sequence when there is a match on third column. I can not use the 3rd column in the original match because it shall be updated where there is a match for the two match column.
I am trying to avoid using transformant for performance impact. Thanks

HIi I think the misleading thing is that in PL/SQL you can use booleans, which is not possible in SQL. So in a PL/SQL tranformation, this is OK:
a:= case when not orgid_lkup( INGRP1.ORG_ID )
then get_supid(..)
else ...
but, the following SQL does not work:
select case when not orgid_lkup( INGRP1.ORG_ID )
then get_supid(..)
else ...
into a
from dual;
I ended up using only 0/1 as boolean return values for these reasons;
so I can have:
select
case when orgid_lkup( INGRP1.ORG_ID ) = 0 then ...
though true booleans are better if you don't have to embed them in SQL.
Antonio

Is there any way to an index that can be used to include the "OR condition "?

Hello I have some questions.
The test was conducted in the following procedure .
create table test
c1 varchar2(10),
c2 varchar2(10),
primary key(c1)
create index test_idx1 on test(c2);
Command> explain select * from test where c1 = 'AAAAAAAAAA' or c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   <NULL>
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA' OR TEST.C1 = 'AAAAAAAAAA'
Command>
Command> explain select * from test where c1 = 'AAAAAAAAAA' and c2 = 'AAAAAAAAAA'
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   TEST.C1 = 'AAAAAAAAAA'
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA'
Command>
By including the "OR condition " in this test does not use the index.
Is there any way to an index that can be used to include the "OR condition "?
Thanks.
GooGyum.

A database cannot in general use indexes in this way for an 'or' involving two different columns. However, for this specific example one can easily rewrite the query using 'UNION' to use the relevant indexes while still giving the same (correct) result:
Command> explain select * from test t1 where t1.c1 = 'AAAAAAAAAA' union select * from test t2 where t2.c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   T1.C1 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                2
LEVEL:               2
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST_IDX2
INDEXED CONDITION:   T2.C2 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                3
LEVEL:               1
OPERATION:           OrderBy
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
STEP:                4
LEVEL:               2
OPERATION:           UnionMergeSort
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
Maybe you can apply a similar trick? If you know there is no possibility of duplicate rows then you can further optimise this (in terms of performance) by using UNION ALL.
Chris

Can we use EXISTS in where condition

hi all,
can we use EXISTS (instead of IN) in where condition of a query which is not part of a subquery ?
for e.g:
update gpf_vou_sm set up_amt=0 where src_cd exists ('1101','1201');
the query works fine with the IN operator in place of EXISTS.
anybody please help.
thomas k prakash

Hi:
You can use EXISTS in where clause but not in that syntax.
UPDATE gpf_vou_sm g
   SET up_amt = 0
WHERE EXISTS (SELECT 1
                 FROM gpf_vou_sm
                WHERE src_cd IN ('1101', '1201') AND id = g.id);Using IN in your case is better...
Saad,

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

HT204053 i couldn't open new terms and conditions of icloud, and so i can't use the icloud on my device iphone 5, this problem appears, when I get new ios 7

i couldn't open new terms and conditions of icloud, and so i can't use the icloud on my device iphone 5, this problem appears, when I get new ios 7

Try download the Find My Friends app and signing in to accept the terms and conditions there.

Can I use conditional formatting in OWA?

Can I use conditional forwarding for emails in OWA. I would like to set up rules in OWA that will allow certain messages to change their display upon receipt.

Hi,
Based on my knowledge, I'm afraid that we can't do it via OWA. You need to setup the conditional formatting on Outlook. Here is the steps for your reference.
On the View tab, in the Current View group, click View Settings, and then click Conditional Formatting. Click Add to create a conditional formatting rule.
For more information, here is a blog for your reference.
Conditional Formatting: Highlight your most important mails
http://blogs.office.com/2012/05/10/conditional-formatting-highlight-your-most-important-mails/
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

How can I put check conditions when using Function 'LDB_PROCESS'

Hy experts,
I am using LDB_PROCESS and I don't know how to use check conditions in the callback forms.
for example:
FORM CALLBACK_QALS USING NAME TYPE LDBN-LDBNODE
                          WA    TYPE QALS
                          EVT   TYPE C
                          CHECK TYPE C.
CASE EVT.
   WHEN 'G'.
     MOVE-CORRESPONDING wa to ITAB_QALS.
     APPEND ITAB_QALS.
ENDCASE.
endform.                    " CALLBACK_QALS
Have anyone an example of how I can use check conditions in this type of form???
thx in advance

Hi
U should indicate in which node (the GET) you need to check the condition, you form should have the following interface:
FORM <formname> USING <nodename> LIKE LDBCB-LDBNODE
                       <workarea> (LIKE ...)
                       <mode>
                       <selected>.
So the code should be:
CHECK <WORKAREA>-FIELD = ............
Max

Trying to update iPhone. Cannot get past the point where I accept iCloud conditions etc. There is no way to continue. What can I do. I can´t use my phone

Trying to update iPhone. Cannot get past the point where I accept iCloud conditions etc. There is no way to continue. What can I do. I can´t use my phone

When registering the phone, you should be able to choose later or basically not now at the upper right hand side. Most of what I think it will at least have you do is sign into your Apple ID but thats it.

Hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

mangesh171 wrote:
my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
No.
Power Adapter/ cord wattage
“Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue.”
http://support.apple.com/kb/HT2346
Best.

How can I delete and update records using where conditions?

I want to delete and update the coherence records with some conditions, I describe it to use SQL as follows:
delete from "contacts" where getStreet() = "dsada";
update contacts set getStreet() = "dddd" where getCity() = "ssss";
Can I use the filter like query to achieve this requirement as follows:
ValueExtractor::View vHomeStateExtractor = ChainedExtractor::create(
ChainedExtractor::createExtractors("getHomeAddress.getState"));
Object::View voStateName = String::create("MA");
Set::View setResults = hCache->entrySet(
EqualsFilter::create(vHomeStateExtractor, voStateName));
I know I can use get and put to achieve this requirement , but it Requires a two-interaction between the client and coherence server. Does it have And another way?
Thanks very much, and please Forgive my English is not very good.

Hi,
You have a couple of options for updating or deleting using a Filter.
For deleting you can use an Entry Processor and the cache invokeAll method. Using "out of the box" Coherence you can use the ConditionalRemove entry processor. I'm a Java person so the C++ below might not be exactly right but you should get the idea.
ValueExtractor::View vHomeStateExtractor = ChainedExtractor::create(
ChainedExtractor::createExtractors("getHomeAddress.getState"));
Object::View voStateName = String::create("MA");
hCache->invokeAll(EqualsFilter::create(vHomeStateExtractor, voStateName),
ConditionalRemove::create(AlwaysFilter.getInstance());For update you would either need to write custom Entry Processor implementations that perform the updates you require or you can use out of the box POF or Reflection ValueUpdaters that update specific fields of the entries in the cache. These valueUpdaters would be wrapped in an UpdaterProcessor so the call would be very similar to the code above.
JK

Can i get a report using join conditions

please provide me some sample reports using join conditions.
thanks

Hi,
You may use the sample code:
PARAMETERS: p_cityfr TYPE spfli-cityfrom,
            p_cityto TYPE spfli-cityto.
DATA: BEGIN OF wa,
         fldate TYPE sflight-fldate,
         carrname TYPE scarr-carrname,
         connid   TYPE spfli-connid,
       END OF wa.
DATA itab LIKE SORTED TABLE OF wa
               WITH UNIQUE KEY fldate carrname connid.
SELECT ccarrname pconnid f~fldate
       INTO CORRESPONDING FIELDS OF TABLE itab
       FROM ( ( scarr AS c
         INNER JOIN spfli AS p ON pcarrid   = ccarrid
                              AND p~cityfrom = p_cityfr
                              AND p~cityto   = p_cityto )
         INNER JOIN sflight AS f ON fcarrid = pcarrid
                                AND fconnid = pconnid ).
LOOP AT itab INTO wa.
WRITE: / wa-fldate, wa-carrname, wa-connid.
ENDLOOP.
Regards,
Renjith Michael.

Under this condition, can I use JNI?

Hi everyone,
I am planning to use JNI for a project, but I only have several DLLs (no source code for them, but only have header file for these DLLs). Can I use JNI to invoke methods in these DLLs directly? Examples in internet are making me believe that I have to use javah to create a header first, and compile this header with C/C++ source code into new DLLs, and then my methods in Java can use methods in DLLs. Am I right?

O, getting understand that I have to write a C/C++ wrapper to make it work. Is there any one who has a small sample to show me how to write a C++ wrapper? Thanks a lot!

Can we use IF statement in PDF templates

Hi,
I developed a PDF template. I need to underline ang bold the records based on a specific condition. Can we use IF conditon in PDF templates. Please suggest.
Thanks...

Billy Verreynne wrote:
The case syntax is a bit funny though as there's not a single condition evaluation (like a DECODE or case structs from some other languages).
This is what I would expect a typical case struct to look like - evaluating a single condition:
case <condition>
when <value-1> then return <result-1>
when <value-n> then return <result-n>
else
return <return-z>
end
?:| You mean like this...?
SQL> ed
Wrote file afiedt.buf
1 select empno, ename, deptno
2        ,case deptno
3           when 10 then 'This is Department 10'
4           when 20 then 'And department 20'
5           when 30 then 'And of course department 30'
6         else
7           'Blimey it is something else!'
8         end as dept_desc
9* from emp
SQL> /
     EMPNO ENAME          DEPTNO DEPT_DESC
      7369 SMITH              20 And department 20
      7499 ALLEN              30 And of course department 30
      7521 WARD               30 And of course department 30
      7566 JONES              20 And department 20
      7654 MARTIN             30 And of course department 30
      7698 BLAKE              30 And of course department 30
      7782 CLARK              10 This is Department 10
      7788 SCOTT              20 And department 20
      7839 KING               10 This is Department 10
      7844 TURNER             30 And of course department 30
      7876 ADAMS              20 And department 20
      7900 JAMES              30 And of course department 30
      7902 FORD               20 And department 20
      7934 MILLER             10 This is Department 10
14 rows selected.

Can we use If condition in so10?

Similar Messages

Maybe you are looking for