Can you please test your Unibody 17in 9600 graphics card.
I have a problem where I am getting green lines and distortion lines on my screen when I am playing COD 4. I've been reading through forums on what is happening to other people with the same problems. I have read that some have tried a SMC reset and have had good results temporarily.
I think there is a way to replicate the problem by going to apple's movie trailer site and downloading three HD trailers. Put all the trailers on loop and let run for at least 10 minutes.
Please post your results..
Note: If you did do a SMC reset put the machine to sleep and then wake it up and see if the graphics problem is still gone.
Thanks.
Hi,
if you want to speed Motion up for under 300USD - the best way is to change your graphic card to ATI 9800 Pro Mac Edition for 249USD.
This card you can find here:
https://eshop.macsales.com/item/ATI%20Technologies/100435066/
There is a faster card to your computer - NVIDIA 6800 GT DDL or NVIDIA 6800 Ultra DDL - but there are much more expensive:
http://www.welovemacs.com/6613441.html
http://www.welovemacs.com/6613332.html
And in fact, it is almost all you can do with your computer.
Of course you can ad some RAM (I don't know how many RAM do you have now). For about 90 USD you can buy at OWC 1GB of RAM - it will help a little in Motion.
I think that you can not have PCI-X graphic card installed in your computer - only AGP card will work.
And besides of it having two cards, if you don't have 3 monitors connected, doesn't have any sense. Only cards called crossfired can be installed in pair for have better performance.
Marek.
Similar Messages
-
Can you please fix your browser's tab issue? (I've switched over to Chrome)
Can you please fix your browser's tab issue? (I've switched over to Chrome until this issue has been resolved)
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6What issues do you have with Tabs in Firefox?
-
I don't know if you all realize but iTunes has been updated more than five times so can you please update your information on how to transfer apps form a IOS device to iTunes please
Please be aware that you are not communicating with Apple when you post in these forums. Most of the people who will reply to your posts are, like me, your fellow users.
As to your comment, I don't know what it is you're referring to, but if you believe a support article is incorrect, you can tell Apple about it here:
https://ssl.apple.com/support/feedback/
Regards. -
Can you please share your experience in implementing / upgrading the Primavera EPPM R8.3?
Hi,
In our company various versions (V7, R8.1 and R8.3) of Primavera being used in various locations. To bring all the location to a common platform, management has decided to implement / upgrade Primavera EPPM P6 R8.3 and also planned to integrate Primavera P6 R8.3 EPPM with Oracle (EBS) Projects application . Hence, If any of you implemented Primavera P6 EPPM R8.3 or upgraded the earlier versions to Primavera P6 R8.3. Please share your ideas and also the pros and cons of implementing R 8.3 EPPM. For your information we are going to have SQL database since all the existing databases are in SQL.
Please share your ideas and experiences.Hi,
we have done a lot of implementations and migrations to the P6 EPPM R8.3 from different former versions and this is working fine. the dbsetup does a good job.
A good way in my point of view is to set up a new P6 EPPM R8.3 system with a new PMDB Instance which will keep the configurations so that you easily can migrate or exchange the instances. Always remind to have a validated backup of any instance before migrating.
Before migration you should mind the following points:
The source version of the old P6 PMDB instance is:
P6.2.1 or before => first you need to migrate it to P6 V7.0 before you can migrate it to P6 R8.3
P6 V7.0 => check if you have used P6 WebAccess: if not okay, else check if you used jackrabbit (look for migration tool), Workflows (close all before migrating); Check if using Jobservice XER-Export (no longer available); Jobservice Batchreport (only Workaround available see Knowledgebase); Risks in the P6 Client (need to be manually migrated)
P6 R8.0 to R8.2 => Using Extended Schema, Enterprise Reporting Database, own BI Publisher Reports => Check stept to be taken for migration
Other questions are:
Which authentication method will you use (native, LDAP, SSO)? If not using native and you want to connect the BI Publisher then you need also to use that authentication there.
The migration itself is pretty easy if you take care that all sessions are closed (no users or unclosed primavera sessions settings on that instance, stop all Applications, interfaces or Services connected to the instance. Cleanup your refrdel_deletes, logical_deletes and (if used before), extended Schema tables.
Then you can migrate with dbsetup, use additional Service Packs and Fixpacks (actually Service Pack 1) on the instances and then you can connect them into the environment by adding it to the P6 Configuration.
I mentioned you don't want to put all data into one final PMDB-Instance.
Regards,
Daniel -
Can you add memory to a IMac's graphics card?
I have a 2011 IMac with an AMD Radeon HD 6970M 1GB GDDR5, can I add another 1gb to it?
Greetings,
I have a 2011 IMac with an AMD Radeon HD 6970M 1GB GDDR5, can I add another 1gb to it?
The memory on the AMD Radeon HD 6970M is integrated into the graphics card. It cannot be removed / upgraded.
While not directly related, you can upgrade the RAM of your CPU if you like.
Cheers. -
Adobe - Can you please get your code straight before releasing it !
The Adobe Creative Cloud CC version is the drop that makes the water in the glass spill over...
The Creative Cloud App is not at all reflecting anything current etc.. and one has to sign out all the time.
This is baby-code !
Lightroom 5 is about the most erratic software I have ever worked with...
1) Constant Freezes
2) New Version 5.2 NOT showing in Creative Cloud App
3) When trying to download manually - ACC app opens and nothing happens
4) If one selects 2500 Photos in Lightroom and reply a preset to all the images at one WHILE the previews are being updated) LR WILL freeze
etc etc etc etc
You really should be testing you software before you release it to the public. You code has been disintegrating the past years and I ann many of the co-workers
are just waiting for other apps to emerge. What happened to the old adobe ? The quality-makers ????
I'm on OS X 10.8 and have NO idea what it looks like in the windows world. But I know that you have completely LOST any control over your own apps on OS X!
I am a very unhappy camper and if this does not change in the near future you are going to have people that littel cure adobe river !Hi ;-)
1) I have used LR since V1 and since V4 this software along with ALL adobes software has been fiercely deteriorating.
2) Adobe according to themselves ARE reading and responding to these forums... Unless they support pages are as bull as their "alleged" real human behind a chat ;-)
3) I process around 30,000 images per week in Lightroom (paid work) and let me tell you at that amount of images... This app is not in the pro league... BUT it COULD be... If only adobe would test their software prior to embarkin on the PAYING public... Perhaps because so manu are using pirated versions of adobes software, they have stopped caring.. As a long time paying client I feel *****-slapped !@
I do NOT beta test for adobe ! If they wanna get rid of their bugs, all they need to do is to contact me and add me to the list.. That will fix at least 100 bugs currently IN the ware... But I highly doubt that they beta test this software... If they do, they should REALLY skim thru their testers and relieve them of their duty - No personal offence meant ! -
Can you please test a simple program on the PDA for me
Hi,
I am attaching a simple code for writing an array on the serial port of the PDA. The serial port is configured for 57600, 8, 1 stop, no parity.
I need to know if you get the following sequence in the display "Checkstring 3" : 03,08,00,01,03,00
On my PDA (IPAQ 5450) the "00" is not displayed or transmitted. Hence I wish to know if LV has a bug or I need to write a DLL to do this operation.
Please help me, because this is the last thing that I expected LV to go wrong.
Thanks in advance.
Attachments:
UnderDev_SerialPortCommandWrite.vi 70 KB
Serial_Port_Initialize.vi 27 KBHello �
I tried your program in an iPAQ H3845 and I was able to see the 00 in the sequence.
S Vences -
Can you please test this page?
http://www.massmediacc.com/clients/COH_7-17-09/COH_Newsletter.html
My client is saying there are issues when running this on a PC Internet Explorer. Not sure which version. But it looks good on my mac Firefox and Safari. My coding is not that great yet, so maybe I missed something. Also is there a way to have the three columns line up on a browsers? Right now everything is set to a fixed length. Should I change that? Thanks for everyones help!
MichaelNot bad according to w3C validator you only have three errors ans one warning. This might be enough to throw IE into a Tizzy
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.massmediacc.com%2Fclients%2FCOH_7-17-09 %2FCOH_Newsletter.html&charset=%28detect+automatically%29&doctype=Inline&group=0
Click on the link to see what needs fixed especially the warning. -
I am a user from Taiwan, I wonder why my iTune purchase is charged in USD not in Local Currency. Thanks.
Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful. -
I bought a new IMAC Apple pc a month ago and am used to Windows. I am new to MAC software and tried to solve the issue myself by searching online and through your database without success. Can you please help by sending step by step instructions on how to fix the above issue.
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an old profile (if you have one) to that new profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?
Hi Laura-Wedders,
Thanks for visiting Apple Support Communities.
On August 7th, some users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Apple worked quickly to resolve these issues, however you may have experienced them.
To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If you are still experiencing issues, you may want to troubleshoot with the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
All the best,
Jeremy -
trying to download indesign for mac, photoshop and illustrator trial which i require immediately but your website is crashing/saying there is an error. Can you please advise when this will be rectified?
WHatever issues you have are specifuc to your local system, not Adobe. Since you have not provided any shred of useful,technical details such as system info nobody can tell you anything.
Mylenium -
Hi Team,
After upgradataion ,In testing phase- after search ,in result view we are getting some unwanted data ' +++++" should be added in Name .how to remove it.can you please help.
I want to remove ++++ in that column.Hi Kalpana,
Please provide additional information for community users to relate this issue. Info like versions (old & new), the object which has this problem or component/view name will be useful to get the answers.
Regards,
Shobhit -
Can you please, anyone tell me your opinion of why all of a sudden my two yr old MacBook was wrking lovely but now I cannot turn it on, even though my battery is fully charged,
Thank you,
IsabellaIf Niel's suggestions don't work then also try:
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM -
Can you please explain how this query is fetching the rows?
here is a query to find the top 3 salaries. But the thing is that i am now able to understand how its working to get the correct data :How the data in the alias table P1 and P2 getting compared. Can you please explain in some steps.
SELECT MIN(P1.SAL) FROM PSAL P1, PSAL P2
WHERE P1.SAL >= P2.SAL
GROUP BY P2.SAL
HAVING COUNT (DISTINCT P1.SAL) <=3 ;
here is the data i used :
SQL> select * from psal;
NAME SAL
able 1000
baker 900
charles 900
delta 800
eddy 700
fred 700
george 700
george 700
Regards,
Renu... Please help me in understanding the query.
Your query looks like anything but a Top-N query.
If you run it in steps and analyze the output at the end of each step, then you should be able to understand what it does.
Given below is some brief information on the same:
test@ora>
test@ora> --
test@ora> -- Query 1 - using the non-equi (theta) join
test@ora> --
test@ora> with psal as (
2 select 'able' as name, 1000 as sal from dual union all
3 select 'baker', 900 from dual union all
4 select 'charles', 900 from dual union all
5 select 'delta', 800 from dual union all
6 select 'eddy', 700 from dual union all
7 select 'fred', 700 from dual union all
8 select 'george', 700 from dual union all
9 select 'george', 700 from dual)
10 --
11 SELECT p1.sal AS p1_sal, p1.NAME AS p1_name, p2.sal AS p2_sal,
12 p2.NAME AS p2_name
13 FROM psal p1, psal p2
14 WHERE p1.sal >= p2.sal;
P1_SAL P1_NAME P2_SAL P2_NAME
1000 able 1000 able
1000 able 900 baker
1000 able 900 charles
1000 able 800 delta
1000 able 700 eddy
1000 able 700 fred
1000 able 700 george
1000 able 700 george
900 baker 900 baker
900 baker 900 charles
900 baker 800 delta
900 baker 700 eddy
900 baker 700 fred
900 baker 700 george
900 baker 700 george
900 charles 900 baker
900 charles 900 charles
900 charles 800 delta
900 charles 700 eddy
900 charles 700 fred
900 charles 700 george
900 charles 700 george
800 delta 800 delta
800 delta 700 eddy
800 delta 700 fred
800 delta 700 george
800 delta 700 george
700 eddy 700 eddy
700 eddy 700 fred
700 eddy 700 george
700 eddy 700 george
700 fred 700 eddy
700 fred 700 fred
700 fred 700 george
700 fred 700 george
700 george 700 eddy
700 george 700 fred
700 george 700 george
700 george 700 george
700 george 700 eddy
700 george 700 fred
700 george 700 george
700 george 700 george
43 rows selected.
test@ora>
test@ora>This query joins PSAL with itself using a non equi-join. Take each row of PSAL p1 and see how it compares with PSAL p2. You'll see that:
- Row 1 with sal 1000 is >= to all sal values of p2, so it occurs 8 times
- Row 2 with sal 900 is >= to 9 sal values of p2, so it occurs 7 times
- Row 3: 7 times again... and so on.
- So, total no. of rows are: 8 + 7 + 7 + 5 + 4 + 4 + 4 + 4 = 43
test@ora>
test@ora> --
test@ora> -- Query 2 - add the GROUP BY
test@ora> --
test@ora> with psal as (
2 select 'able' as name, 1000 as sal from dual union all
3 select 'baker', 900 from dual union all
4 select 'charles', 900 from dual union all
5 select 'delta', 800 from dual union all
6 select 'eddy', 700 from dual union all
7 select 'fred', 700 from dual union all
8 select 'george', 700 from dual union all
9 select 'george', 700 from dual)
10 --
11 SELECT p2.sal AS p2_sal,
12 COUNT(*) as cnt,
13 COUNT(p1.sal) as cnt_p1_sal,
14 COUNT(DISTINCT p1.sal) as cnt_dist_p1_sal,
15 MIN(p1.sal) as min_p1_sal,
16 MAX(p1.sal) as max_p1_sal
17 FROM psal p1, psal p2
18 WHERE p1.sal >= p2.sal
19 GROUP BY p2.sal;
P2_SAL CNT CNT_P1_SAL CNT_DIST_P1_SAL MIN_P1_SAL MAX_P1_SAL
700 32 32 4 700 1000
800 4 4 3 800 1000
900 6 6 2 900 1000
1000 1 1 1 1000 1000
test@ora>
test@ora>Now, if you group by p2.sal in the output of query 1, and check the number of distinct p1.sal, min of p1.sal etc. you see that for p2.sal values - 800, 900 and 1000, there are 3 or less p1.sal values associated.
So, the last 3 rows are the ones you are interested in, essentially. As follows:
test@ora>
test@ora> --
test@ora> -- Query 3 - GROUP BY and HAVING
test@ora> --
test@ora> with psal as (
2 select 'able' as name, 1000 as sal from dual union all
3 select 'baker', 900 from dual union all
4 select 'charles', 900 from dual union all
5 select 'delta', 800 from dual union all
6 select 'eddy', 700 from dual union all
7 select 'fred', 700 from dual union all
8 select 'george', 700 from dual union all
9 select 'george', 700 from dual)
10 --
11 SELECT p2.sal AS p2_sal,
12 COUNT(*) as cnt,
13 COUNT(p1.sal) as cnt_p1_sal,
14 COUNT(DISTINCT p1.sal) as cnt_dist_p1_sal,
15 MIN(p1.sal) as min_p1_sal,
16 MAX(p1.sal) as max_p1_sal
17 FROM psal p1, psal p2
18 WHERE p1.sal >= p2.sal
19 GROUP BY p2.sal
20 HAVING COUNT(DISTINCT p1.sal) <= 3;
P2_SAL CNT CNT_P1_SAL CNT_DIST_P1_SAL MIN_P1_SAL MAX_P1_SAL
800 4 4 3 800 1000
900 6 6 2 900 1000
1000 1 1 1 1000 1000
test@ora>
test@ora>
test@ora>That's what you are doing in that query.
The thing is - in order to find out Top-N values, you simply need to scan that one table PSAL. So, joining it to itself is not necessary.
A much simpler query is as follows:
test@ora>
test@ora>
test@ora> --
test@ora> -- Top-3 salaries - distinct or not; using ROWNUM on ORDER BY
test@ora> --
test@ora> with psal as (
2 select 'able' as name, 1000 as sal from dual union all
3 select 'baker', 900 from dual union all
4 select 'charles', 900 from dual union all
5 select 'delta', 800 from dual union all
6 select 'eddy', 700 from dual union all
7 select 'fred', 700 from dual union all
8 select 'george', 700 from dual union all
9 select 'george', 700 from dual)
10 --
11 SELECT sal
12 FROM (
13 SELECT sal
14 FROM psal
15 ORDER BY sal DESC
16 )
17 WHERE rownum <= 3;
SAL
1000
900
900
test@ora>
test@ora>
test@ora>And for Top-3 distinct salaries:
test@ora>
test@ora> --
test@ora> -- Top-3 DISTINCT salaries; using ROWNUM on ORDER BY on DISTINCT
test@ora> --
test@ora> with psal as (
2 select 'able' as name, 1000 as sal from dual union all
3 select 'baker', 900 from dual union all
4 select 'charles', 900 from dual union all
5 select 'delta', 800 from dual union all
6 select 'eddy', 700 from dual union all
7 select 'fred', 700 from dual union all
8 select 'george', 700 from dual union all
9 select 'george', 700 from dual)
10 --
11 SELECT sal
12 FROM (
13 SELECT DISTINCT sal
14 FROM psal
15 ORDER BY sal DESC
16 )
17 WHERE rownum <= 3;
SAL
1000
900
800
test@ora>
test@ora>
test@ora>You may also want to check out the RANK and DENSE_RANK analytic functions.
RANK:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions123.htm#SQLRF00690
DENSE_RANK:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions043.htm#SQLRF00633
HTH
isotope
Maybe you are looking for
-
Exporting sounds in Pages document to PC users
Is it possible to export a Pages document with sound clips embedded, to a PC user? I tried exporting as a PDF but even when I opened this on my iMac with Preview or Adobe Reader, the sound clip icon was missing. I exported as a Word document (which c
-
Can I buy a television 32 inch for a mac mini and have a good image quality?
Hello I want to buy a tv 32 inch for work with videos, the image on tv will be good ?
-
Photoshop Elements 8 import from Epson Scanner?
How can I get Photoshop Elements 8 to import from my Epson scanner? On my previous computer, the scanner just showed up when I selected "Import" under File? I've spent 2.0 hours with the supposed "tech support" in India and they had no idea. I've
-
Hi, I want to insert values into a table 'Reasons'. The table 'Reason' has 5 columns out of 5 two columns has static data say column A value 'A' column E value sysdate But in the other three columns the vlues are repeating and as follows. Column B al
-
Viewing rented content across multiple ATV
I have multiple ATV if I rent on one can I watch the rented content on any of the ATV or only the one I originally rented the content on? Thanks for the info. On a side note I noticed with my Denon AVR I had to change my ATV Digital Dolby setting to