Can you run multiple Excel Services Applications against a single Web Application?

I have been struggling with this one for a while now, hopefully someone can help me understand what I am missing...
I have a single SharePoint Farm.  This farm runs multiple Web Applications & the Service Applications.
1. SharePoint Only Server with Multiple Site Collections (http://sharepoint.com/...)
2. MS Project Server with Multiple Site Collections (http://pwa.com/...)
3. My services applications all exist on the same farm.
I was under the impression, and believe that I validated this through testing and from this site (http://blogs.office.com/2009/11/16/excel-services-in-sharepoint-2010-administration-improvements),
that you can only run a single Excel Services Application against each unique Web Application.  In essence, I can run one Excel Services Application against the SharePoint Only Server, and another Excel Services Application against the MS Project
Server...  However, I can NOT run multiple Excel Services Applications against the different Site Collections within the MS Project Server becuase it is only aware of its "default" Excel Service Application. 
ie. I can NOT do the following:  ExcelServiceApp1 for
http://pwa.com/SiteA & ExcelServiceApp2 for
http://pwa.com/SiteB
Is that correct?
If that is not correct, then I must be missing a way to specify a different Excel Service App for each Project Web App Site. 
Some other solutions that I think may work, but would really appreciate if someone could validate:
- Create multiple Project Server Service Applications for each instance of PWA/Excel Service? (but wouldn't this still have to use one of the two WebApplications and cause the same limitation?)
- Create a new Web Applciation for each PWA/Excel Service?  (ie.
http://pwasite1.com;
http://pwasite2.com; http://pwasite3.com, etc.)
Thoughts/suggestions are very greatly appreciated!!!

Hello Trpy2k
I have not done what you are doing and I assume that you are using project server 2010.  However, you answer lives in PowerShell.
The New-WebServiceProxy show that you can create a new proxy by spacing a URL and not a web application. The default proxy from the web application is directing to the default excel service.  If you need another excel service, you must specify another
proxy and this may do it for you.
Also, don't forget the Secure State service and that each excel report will need this configured, that is with the assumption that the other excel service requires different authentication.
PS.  This question may get a better answer in the SharePoint forums.
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Similar Messages

  • Can you run multiple APEX listeners for different instances on the same server

    Please confirm that we can run multiple APEX listeners for different instances on the same server?  Is it an xml setup configuration or do we need to do more??
    Thank You,
    Tony Miller
    SmartDog Services
    Austin, TX

    Yes.. Just exactly what I was looking for...
    Thanks Jari!!
    Thank You,
    Tony Miller
    SmartDog Services
    Austin, TX

  • Can I run multiple Excel Windows?

    Hi,
    My users would like to be able to view multiple BPC Excel spreadsheet simultaneously in Excel 2010.  I have tried several different ways to do this, but it appears that BPC only allows one instance of the add-in to run, i.e. I opened another Excel window, but the add-in logon does not work.  I can have multiple reports brought up, but since there is only one Excel window, I can only see one full size report at a time. We need to have more than one Excel window running.
    Thanks,
    Andy

    Unfortunately I don't think this is possible. It used to be easier back in Office 2003 to run multiple sessions but I think even then, because of the nature of the BPC Excel plugin, it's just not very possible. The only thing that could get you close is to minimize the BPC action pane, maximize Excel, double click on a ribbon tab to auto-hide the Office 2010 ribbon, then use Excel's window arranging features to view two reports side by side.
    I know that is not the best answer but unfortunately there just isn't a way to have two sessions of BPC for Excel open like that.
    -Brian

  • Can you run multiple ATV's?

    Are there any issues with running multiple ATV's at the same time- playing different content? Also, are you able to broadcast the same content (say from itunes on my Mac) to all ATV's at once (I can see this used at parties where I can have all the TV's on displaying the same video/photo reel). I am hoping there are some freaks like me out there who are planning/have already populated all their TV's with ATV's.
    Also, will the digital audio out work without HDMI being plugged in (in case I want to use an ATV as an audio-only receiver to an amp?)

    I have to ATVs setup and it is actually quite amazing how you can play different content on each of them from the same library... wicked. I cannot attest to streaming video since 4.2 is still in beta and iTunes from the desktop is not streaming video to ATV, but audio works great. Apple is really onto something here...

  • Can you run an XPC service inside a plugin? (e.g. a Print Dialog Extension plugin)

    I am creating a Print Dialog Extension (PDE) plugin. This plugin is called and displayed when a user Prints from different apps, e.g. TextEdit, Preview, Xcode, etc. Note that the plugin runs on top of the app that called the Print Plugin (for example, TextEdit).
    Inside the plugin, I need to run an XPC service. I need an XPC service since the entitlements on the main app might not be sufficient for my needs, e.g. I need to connect to the network, and TextEdit does not have the required entitlements for network connection.
    The problem is, I can't create an XPC connection. The handler always fire with XPC_ERROR_CONNECTION_INVALID.
    1.) Is this because the PDE Plugin is not inside the main bundle/main app, e.g. Text Edit?
    2.) If yes, how can I still run an XPC service within a PDE Plugin?
    3.) If no, then why can't I successfully create an XPC connection?

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Audio/Plug-Ins/HAL/de.access-music.virus_ti.plugin
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Can you run a bash script on boot in single user mode

    Hey guys quick question.
    Is it possible to run a bash script on boot in single user mode.
    I can create a file and dump it on the root hd.
    Let's call it repair.
    I can then boot to single user mode and run it by typing /repair.
    But I want it to do it automatically.
    Every time I go into my machines that I clean for my job. I have to run sbin/fsck -fy
    Then I have to mount the drive and then remove all cache files, then reboot the machines.
    I would like to automate this by just holding command s and then moving to the next computer.
    There must be some sort of boot daemon somewhere.
    Please help.
    Sincerely,
    John

    Have you seen Applejack?
    http://applejack.sourceforge.net/
    It doesn't start automtically, but does cleanup.
    Robert

  • Can you run multiple slideshow consecutively?

    I have arrange my vacation pictures into individual "chapters" (albums) and then into slideshows with a musical background from Itunes. I would like to select these slideshows and have them play automatically in a prescribed order without going into Iphoto and manually selecting them one at a time. Is this possible?
    I did it this way so that I could set the slideshows to fit the music. If I combine them all into one album, it would be much more difficult to match the music to the photos. I think I would end up having to use Audacity to clip tracks and merge them into one sountrack. I can do that, but it would be far less hassle to simply tell Iphoto to play one slideshow after another, if possible, or to determine some equally easy alternate method.
    Any ideas?

    Welcome to the Apple Discussions. One way to do what you would like is, as Terence suggested, export each slideshow to Quicktime and then use an application like PhotoPresenter to string them together to play. Or create them in PP, save to QT and add back. PP has over 20 themes and produces some of the slickest slideshows. This is just one of the themes.
    If you have Quicktime Pro you can join the slideshows together also.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Can you run multiple versions of Message  on one computer, i.e. one for each phone line on our account?

    Does anyone know if you can run more than one Message+ on one computer, one for each of our phones?

        CATTULLOS
    Great question! The way to do it is, you will need to open up multiple browsers. (one for each phone number) The only thing you would need to do is log into www.vzw.com for each individual number to be able to send the text messages. Keep us posted let us know if this helps.
    JorgeO_VZW
    Follow us on Twitter @VZWSupport

  • Can you run multiple DADs?

    I have NAT running to allow outside access to my 9i AS server. The web server is answering, but trying to login to portal gives error WWC-41439. I think the problem is that we do not run DNS internally, so the DAD is set to a host that only the portal server knows about.
    Access from the outside is via ip address:port number. Can I create a second DAD that will use the ip address in place of the host name. It appears that running sodatan will replace the existing config, not add a second config.
    Thanks

    You can create multiple DAD's for accessing Portal. The correct script to run in this case is "ssodatax" and not "ssodatan". All documentation for this available with Portal documentation and in the script as well.
    Also, the correct forum for Oracle Portal specific questions is "Oracle 9iAS Portal". Please post further questions on this topic to this forum instead of the "Oracle 9i Application Server" forum.

  • Can you run multiple WM farms in a domain?

    I am in the process of testing WM 1.0 with SharePoint 2013 RTM.  We have dev/staging/production SP farms in our domain.  I'd like to setup different workflow farms to support each of those environment.  I'm starting to see a problem (cannot
    register SP site to the 2nd farm) when trying to setup the 2nd WM farm.  Before trying to debug, I want to make sure this topology is supported.  I can't find any definite answer in the online docs.
    Does anyone know if running 2 Workflow Manaer farms (not clustered) is supported?
    Thanks,

    Thank you for your reply.
    So we set up our first SharePoint 2013 farm.   This farm has 1 WFE (http://spwfe), 1 App Server (http://spapp) and 1 SQL Server. 
    I installed Workflow Manager 1.0 on the App Server, which is part of the SharePoint farm, pretty much follow the instruction here
    http://technet.microsoft.com/en-us/library/jj658588.aspx. 
    After  the WM installation, I paired the SP farm by using:
    Register-SPWorkflowService –SPSite "http://spwfe" –WorkflowHostUri "http://spapp:12291" –AllowOAuthHttp
    Everything seems to work well.  I can create, publish and run 2013 workflow without any problem
    Then I setup another SharePoint farm, which has 1 WFE (http://spwfe2) and a SQL server. 
    WM is installed on the same SP WFE server.  Again, the installation and configuration seems to be working ok. 
    Get-WfFarm shows all the correct settings.  Then I pair the 2<sup>nd</sup> SP farm to the 2<sup>nd</sup> WM farm with:
    Register-SPWorkflowService –SPSite "http://spwfe2" –WorkflowHostUri "http://spwfe2:12291" –AllowOAuthHttp
    I cannot find any pertinent error message in SharePoint logs or events. 
    I just try to do another pair and got a slightly different error message in the event:
    RequestorId: 420c2323-fb73-c6b0-6c99-d01b58d96c37. Details: System.ApplicationException: HTTP 401 {"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating
    the request.\";category=\"invalid_client\""],"SPRequestGuid":["aea727c2-5cb0-4ffc-9a51-9a010a9b17df"],"request-id":["aea727c2-5cb0-4ffc-9a51-9a010a9b17df"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["429"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
    realm=\"6f29ae7e-d477-45b8-be44-9f492e5b7a6e\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]2e5b7a6e\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
    RequireReadOnly"],"Date":["Tue, 11 Dec 2012 21:23:50 GMT"]} {"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
    or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext
    context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
    bookmarkManager, Location resultLocation)
    By the way, this same problem happens on 2 different environment (my labs and at a client site).
    Did you find the issue and fixed? I have the same issue. It sound like two farm are completed isolate and nothing relate except they use same AD and network. Farm1 (dev) and Farm2 (Staging) are completed isolate and not connect to each other including workflow
    manager.

  • Can you run multiple iPods on same computer?

    I have a "regular" ipod and have successfully loaded iTunes (dated 10-12-2005) on my pc. My husband just bought a shuffle but we cannot seem to run them on the same pc. Why not? iTunes just will NOT recognize the shuffle. I have successfully loaded the shuffle on our kids' pc; but all 2,000 songs are on my pc. I DON'T want to reload all of them. ANY suggestions? Comments?
    I did try to update the iTunes. Ran into other problem - iTunes wouldn't even start - had to uninstall/reinstall.
    Dell   Windows XP  

    I had the same problem with iTunes not recognizing my
    iPod Shuffle. What I did to fix the problem was to
    download the latest version of the iPod updater and
    select the restore option. It should reset the
    factory settings and flash the device with the latest
    software. I recommend trying to get iTunes to
    recognize the shuffle on its own, and then connecting
    the additional unit.
    Sounds great - but every time I load updater I cannot even start iTunes. VERY frustrated.

  • Can you help me?the config error about ORACLE Web Application Server3.0 for Solaris,

    hello anyone
    i install oracle7.3.4 server
    in Sun Sparcstation20 Solaris2.6 Japanese
    everything is ok,
    and i want to install ORACLE
    WEB appliation server 3.0too
    the installer is ok too,
    i startup the serivce
    >owsctl start wrb
    >owsctl start admin
    but when i open the netscape and
    CRAETE and START a new LISTENER
    there is something wrong.
    **************************error message*******
    OWS-05721: The Web Listener www failed to start:
    Oracle Web Listener 3.0.1 Production (Export), Version 2.14FC1
    Copyright 1997 Oracle Corp. All Rights Reserved.
    Error: A failure occurred ( Permission denied ) when assigning a port ( domain: INTERNET01, address: 0.0.0.0, port: 80 ).
    Error: Failed to start the server.
    Error: The server could not initialize
    Information: The server is exiting
    OWS-08811: Unable to startup Oracle Web Listener `www'.
    Oracle Web Listener Home Page
    From here, you can do the following:
    Create a new Oracle Web Listener to run on your machine by clicking the Create Listener... button.
    Modify existing Oracle Web Listeners by selecting the Configure link below.
    Start, Stop or Delete existing Oracle Web Listeners by selecting the appropriate link below.
    can anyone help me , it is too difficult for me.
    the startup file of Solaris is here
    # @(#)cshrc 1.11 89/11/29 SMI
    umask 022
    set path=(/bin /usr/bin /usr/ucb /etc .)
    if ( $?prompt ) then
    set history=32
    endif
    setenv ORACLE_BASE /oracle/app/oracle
    setenv ORACLE_HOME /oracle/app/oracle/product/7.3.4
    setenv ORACLE_SID hlp3
    setenv ORAWEB_HOME $ORACLE_HOME/ows/3.0
    setenv ORAWEB_SITE www
    setenv ORAWEB_BASE $ORACLE_HOME/ows
    setenv ORAWEB_ADMIN $ORACLE_BASE/admin
    setenv ORAWEB_CARTX $ORACLE_HOME/ows/cartx
    setenv DEF_INSTALL TRUE
    setenv ORA_CSM_MODE line
    setenv LD_LIBRARY_PATH $ORACLE_HOME/lib:/usr/openwin/lib:/usr/dt/lib:
    setenv ORACLE_TERM xsun5
    setenv TMPDIR /var/tmp
    setenv PATH .:$ORACLE_HOME/bin:$ORACLE_HOME/obackup/bin:/opt/bin:/usr/local/bin:/bin:/usr/bin:/usr/css/bin:/usr/openwin/bin:/usr/sbin:/usr/ucb:$ORAWEB_HOME/bin
    setenv ORA_NLS32 $ORACLE_HOME/ocommon/nls/admin/data
    setenv DEF_INSTALL TRUE
    setenv MANPATH /opt/SUNWspro/man:/opt/SUNWste/licence_tools/man
    # setenv LANG
    # setenv TWO_TASK
    set ORAENV_ASK = NO
    source /opt/bin/coraenv
    unset ORAENV_ASK
    source /oracle/app/oracle/product/7.3.4/ows/3.0/install/owsenv_csh.sh
    # @(#)local.login 1.3 93/09/15 SMI
    stty -istrip
    # setenv TERM `tset -Q -`
    # if possible, start the windows system. Give user a chance to bail out
    if ( `tty` == "/dev/console" ) then
    if ( $TERM == "sun" &#0124; &#0124; $TERM == "AT386" ) then
    if ( ${?OPENWINHOME} == 0 ) then
    setenv OPENWINHOME /usr/openwin
    endif
    echo ""
    echo -n "Starting OpenWindows in 5 seconds (type Control-C to interrupt)"
    sleep 5
    echo ""
    $OPENWINHOME/bin/openwin
    clear # get rid of annoying cursor rectangle
    logout # logout after leaving windows system
    endif
    endif
    setenv ORACLE_HOME /oracle/app/oracle/product/7.3.4
    setenv PATH /bin:/usr/bin:/etc:/usr/etc:/usr/openwin/bin:/usr/ucb:/oracle/app/oracle/product/734/bin:$ORAWEB_HOME/bin
    setenv NLS_LANG japanese_japan.ja16euc
    setenv LANG japanese
    setenv ORACLE_TERM xsun5
    setenv ORAWEB_HOME $ORACLE_HOME/ows/3.0
    setenv ORAWEB_SITE www
    setenv TNS_ADMIN /oracle/app/oracle/product/7.3.4/network/admin
    can anyone help me and tell me how to solve it or any aother way book doc to do it,
    thank you
    i am very nervious
    my email address:
    [email protected]
    [email protected]

    see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

  • HT2534 Can you have multiple ITunes accounts under a single e-mail address (i.e. separate accounts for my children and myself?)?

    Can you have multiple ITunes accounts assigned to a single e-mail address?  i.e. different Apple ID's for my kids and myself, but all assigned to my e-mail address.

    No. Each account must have uniquie email address.

  • Creating Extranet and Intranet in a single web application?

    I'm confused ... again! Maybe you can help.
    Microsoft's best practices for setting up SharePoint 2013 is to utilize a single web application in a single web application pool.
    My Network Topology
    I am setting up my intranet AND extranet in a back-to-back perimeter network topology using Claims and Kerberos Constrained Delegation. I will have a dedicated AD instance on the DMZ which my clients will be added to. My corporate users will access the site
    via ADFS using their credentials on our internal network. There will be only a One Way Trust wherein the extranet AD will trust the corporate AD. We will be using Host named site collections and giving clients their own URL. They will basically be accessing
    a single list and perhaps a page that gives them some reports about tasks across a few sub-sites and the a status of a single workflow on the root site of their site collection.
    My SharePoint Topology
    I would like to follow MS' Best Practice as stated above but I'm not clear on a few things.
    1. Does it matter whether my extranet or intranet is on the Default Zone? I'm thinking that the intranet should be on the default since that is where Search crawls and that's the only place where search will be used in any way.
    Is it possible to have two sets of permissions on a single web application, one for internal and one for external, without extending the default zone to create the extranet and thereby creating a new IIS website (webapp) in the process?
    Thank you!
    Love them all...regardless. - Buddha

    Hi,
    Please refer below.
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/47081f77-fccb-4bc3-906b-76d187861f8c/intranet-and-extranet-web-applications-on-same-port?forum=sharepointadminlegacy
    http://blogs.technet.com/b/speschka/archive/2013/06/26/logical-architecture-guidance-for-sharepoint-2013-part-1.aspx
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c0702003-8d53-46cf-ac09-49cbd270a43e/extranet-access-to-the-intranet-web-application-sharepoint-2010?forum=sharepointgeneralprevious
    Krishana Kumar http://www.mosstechnet-kk.com
    Please mark the replies and Proposed as answer if they help and solve your issue

  • Can we combine multiple excel files into one excel file using SSIS?

    I have a bunch of excel files in a specified folder. I wanted to combine all the excel files into one excel file by adding additional tabs in one excel file. Can I do this using SSIS?
             OR
    I know using macro we can combine multiple excel files. Can we run a excel macro in SSIS? Please help me.
    Actually the complete package is this:
    Step1: Using FTP task I'm downloading the bunch of excel files into a folder.
    Step2: Above implementation is the second step that I have to do.  

    You can do it in two steps
    1. First get all data from excel sheets to a sql staging table. For that you need to use a looping logic as explained in below link (you dont required the additional logic used for checking file name etc in below example as you need all files). Also make
    source as excel instead of flat file
    http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
    2. Once you get the data onto a single table, use below to get it exported to multiple sheets within same excel destination file
    http://visakhm.blogspot.in/2013/09/exporting-sqlserver-data-to-multiple.html
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for