Can you synchronize an Encrypted DB

We're implementing an Oracle 10g lite solution that will be used to enter and store sensitive health information so obviously security is going to be vital.
My question is:
If we encrypt the Oracle lite db do we have to decrypt it before synching with the mobile server? Or can the synching process handle an encrypted database?
I've done some preliminary testing with a sample application and it seems that you have to decrypt the db before synching for it to succeed.
I know it would be a relatively simple process to decrypt the db â do a synch and then encrypt again but the synchronization is being built into our application and we donât much scope to change the application at this point in time.
I hope this makes sense, thanks.
Scott McKinnon

When you set it up you would have designated an initial capacity. It should expand once that capacity would be exceeded. Sparse images are what Time Machine uses and what is used for the Time Capsule and other network storage devices.

Similar Messages

Can you help with encryption issue with iBook G3?

I have an iBook G3 with operating system 10.2.8. As of yesterday, I am having troubles connecting with my wireless service. It works fine when I plug the DSL cable in. The wireless icon shows up several networks; the one we are paying for is checked. Yahoo will not connect at all; some other websites will. I called our AT&T service and the tech support told me that it is an encryption error. Mac online support cannot help because the computer is too old and beyond warranty. I don't know what an encryption issue means. Can someone help? Thank you!

Hi, and welcome to Apple Discussions.
Read the instructions in the following Apple Knowledge Base carefully, paying close attention to the section entitled "AirPort client to third-party base station":
http://docs.info.apple.com/article.html?artnum=106424
Are you able to determine which type of encryption is used in your wireless network, based on comparing what you see on the iBook to the two diagrams?

Can you resize a encrypted disk image on a sparsebundle disk image?

I created a 50GB encrypted sparsebundle disk image on my desktop. I named it BOB and also named the encrypted disk image BOB.
It's now full.
I've just made it 60GB with Disk Utility.
I opened it but on trying to copy a 4GB file into it, I got a message saying my sparsebundle disk image is too small.
Note: Disk Utility says the following:
BOB sparsebundle is 61.4GB
mounted volume BOB is 52.1GB
Hope that's clear.
Any help would be most appreciated.

I created a 50GB encrypted sparsebundle disk image on my desktop.
hdiutil resize -size 60g BOB.sparsebundle
Result: "resize failed. File or directory does not exist"
You need to tell hdiutil where to find the target BOB.sparsebundle file. You could either specify a relative or absolute file path in the command itself, or else you could first change the current working directory to the Desktop. So if you wanted to pursue using Terminal, the second way would be to enter this command:
cd ~/Desktop
and then try the same hdiutil command again.
I'm not familiar with the hdiutil command, and I don't know if the above would work. My own feeling is that trying to manipulate an image file by experimenting with hdiutil entails a risk of corrupting the image file and losing its contents, and it is therefore essential to back up the image file first. But if you are going take the time and space needed for a backup, you might as well instead just create a new, empty 60GB (or larger!) sparsebundle disk image, and copy the contents of your old disk image into the new one. This would not involve any risks, and you'd end up with the larger disk image that you wanted. You could then delete the original, if you wished.

Can you synchronize outlook email via USB?

I have a palm centro and wondered if there is a way to synchronize my email via a usb connection. I have synchronized calendar, tasks, and memos. Is there software available to do this?
Post relates to: Centro (Verizon)

Do you have the Palm Desktop software installed which came with the Centro? The Versamail user guide describes the setup procedure in Chap. 9, with Start > Programs > Palm group, then selecting Versamail setup.
The Versamail application isn't labeled "Versamail" on the Centro. The icon is just named "Email". But it should also be mapped to the Mail hard button (bottom right). At least, it was on my AT&T Centro...maybe Verizon is different. If it's not, you should be able to change it
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox update

Hello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

Hi, I would like to synchronize the calendar's items of my iPad Mini with my MacBook Pro. At today I can only do the reverse operation (from MacBook Pro to iPad Mini). Can you help me maybe with a little tutorial or something? Many Thanks.

Hi, I would like to synchronize the calendar's items of my iPad Mini with my MacBook Pro. At today I can only do the reverse operation (from MacBook Pro to iPad Mini). Can you help me maybe with a little tutorial or something? Many Thanks.

Hello there Tonynos.
The following Knowledge Base article should help with guiding you on how to synchronize information from your iOS device to your computer:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D.

Can you give me some suggestions for encryption decryption

ok i've written my own encryption decryption techniqu can you suggest me some better methods
Attachments:
EncrypDecrypt2.vi ‏59 KB

karthik9 wrote:
Not to publish ... this is very simple ... i just want to know should i improve this or scrap this
You haven't replied but I guess I haven't answered your question either...
Sure it works but from a LV programming standpoint it is very redundant and Rube Goldberg like.
IMHO you should scrap what you have or at least clean it up.
I am a long ways from being a LV expert but there are the things that pop right out at me when I see your code.
You use identical code in three places, make it a sub-vi.
Why start with a constant of -1 and increment it once inside your for-loop? This value will always be 0.
Don't use array size to set the number of iterations of your for-loop then use the iteration counter to index an array inside the loop, use auto indexing.
Your block diagram is sloppy and hard to follow.

How can you prevent encrypted folders that you created in disc utility from being deleted?

How can you prevent encrypted folders that you created in disc utility from being deleted?

bibst wrote:
How can you prevent encrypted folders that you created in disc utility
You cannot create encrypted folders in, or encrypt folders with, Disk Utility.
You can create with Disk Utility encrypted disk images from folders. I assume that's what you mean.
The proper way to do it is by setting the immutable bit. Read here
<http://www.thexlab.com/faqs/immutableflags.html>
about the immutable bits (and the trouble they sometimes create).
The user immutable bit (uchg) is the same as the Finder lock, as described above by X423424X. It's a weak lock, with only a warning.
The system immutable bit (schg) is more powerful. Once is set, the item cannot be deleted in Finder (even though Finder will ask for your password and may give you the impression that it can trash it; it will end with an error).
I set it in Terminal, thus
$ sudo chflags schg my_encrypted_disk_image
and unset it also in Terminal
$ sudo chflags noschg my_encrypted_disk_image
(Note that, when you unset the system immutable bit, the change won't be reflected immediately in Finder, but the item can be trashed nevertheless.)

Error in OpenPGP; Encryption/signing failed; send unencrypted message? I am getting this after upgrading to the latest version last night. Can you assist me?

Last night, I upgraded to the news Thunderbird version 31. When I try to send a signed message, I get the error written in the subject line and my message arrives without the electronic signature.
Can you assist me with this problem that I did not have before upgrading?
Thank you
Cecilia

Ha! You hit the jackpot! I do have Enigmail 1.6. Will download 1.7 and the latest of Thunderbird again.
Thank you for your support.
Regards,
Cecilia

I can not synchronize data from the prelude livelog

I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
The Prelude can not apply metadata in it.
please can someone help me

Hi -
When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
Michael

I can't synchronize my iPod's with my iTunes software (Windows Vista Home Premium) due to problems with the access authorization / rights for this operation

Hi there,
I'd like to ask you something:
I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
What is this access authorization, why was something like that invented and what can I do to get it?
How do I have to proceed in detail?
What would it cost?
I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
Anyways - can you help me please?
If you can't help me, who can do so?
It would be nice if you could answer me as soon as possible!
Thank you guys
Prying Pedro

Yes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
Termporarily disable any security software on the computer.

Can you move your notes from one iphone to another and how?

Can you move your notes from one iphone to another and how?

You can do this a couple ways. If you are using MobileMe, notes is one of the options for synchronization and that would be automatic. Another way is to backup your iphone to iTunes, this backs up essentially all the information on your phone (except for music) and if you restore the other iphone to the image of the original your notes will be transfered.

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

Can you put purchased DVD movies onto your ipod? also what about DVD moies that you have that are recorded, not bought? and if you can how do you do it?

Can you put purchased DVD movies that you have on your ipod? what about recorded DVD's that you have? and if you can, how? ex) i bought the DVD Tangeled for my daughter and wanted to put it on the ipod.. also she has a disney DVD movie Brother Bear, which was not bought at a store but it is recorded onto a DVD. can we put that on ipod?
and if so..... how????
Thanks in advance for your help.
NaeNae'

"Can you put purchased DVD movies that you have on your ipod? "
No. breaking the encryption in order to copy them illegal.
" what about recorded DVD's that you have? "
Add them to itunes.
http://support.apple.com/kb/HT1473

Can you password protect pages folders

When you create a folder in pages, can you password protect the folder, or it only that documents can have a password?

Only the file can be password protected from within Pages. If you don't want the file to open on your Mac without the password, then do not check, “Remember this password in my keychain,” in the password dialog. Record your document password where you can retrieve it — in case your forget, or if using keychain, in case it becomes damaged.
You can password protect (and encrypt) a folder that contains Pages documents, whether they are password protected or not.
In Finder, press shift+command+U to launch the Utilities Window.
Launch Disk Utility
File > New > Disk Image from Folder…
From the Select Folder to Image dialog, select the folder and click Image
From the New Image from Folder dialog
Image Format
Compressed - folder will be read-only with no ability to add documents later
Read/write - intuitive
Encryption: 256-bit AES Encryption
Save
In the new password dialog, set your password
You should strive for password complexity that shows strength as green
Record your password where you can retrieve it.
Again, the caveat about keychain as mentioned above
A new disk image will appear with the name you gave it, and a .dmg extension
Double-click for the password challenge
The disk image will mount on your desktop just like an installer. Double-click to open.If you chose Image format as read/write, you can drag additional Pages documents into this open folder
Right-click on the mounted image and choose Eject to close it
You can edit Pages documents in-place in the mounted folder, but you will get a warning about space in the image container. If you want to increase the disk image size, open it in Disk Utility. It willl appear below the line in the left panel. Select the .dmg there, and from the Images menu, choose Resize…, and adjust accordingly.

Can you synchronize an Encrypted DB

Similar Messages

Maybe you are looking for